regulator: s5m8767: Use of_get_child_count()
PATCH 1/3 regulator: s5m8767: Use of_get_child_count()
--- drivers/regulator/s5m8767.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/regulator/s5m8767.c +1 -3
@@ -536,9 +536,7 @@ static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev, }/* count the number of regulators to be supported in pmic */ - pdata->num_regulators =0 ; -for_each_child_of_node (regulators_np, reg_np) - pdata->num_regulators++; + pdata->num_regulators =of_get_child_count (regulators_np); rdata =devm_kzalloc (iodev->dev,sizeof (*rdata) * pdata->num_regulators,GFP_KERNEL );
Signature · 1 line
1.7.9.5
PATCH 2/3 regulator: s5m8767: Fix using wrong dev argument at various places
Use &pdev->dev rather than iodev->dev for dev_err(), dev_warn() and dev_info(). Use &pdev->dev rather than iodev->dev for devm_kzalloc() and of_get_regulator_init_data(), this fixes memory leak.
--- drivers/regulator/s5m8767.c | 47 ++++++++++++++++++++++--------------------- 1 file changed, 24 insertions(+), 23 deletions(-)
drivers/regulator/s5m8767.c +24 -23
@@ -479,7 +479,7 @@ static struct regulator_desc regulators[] = { };#ifdef CONFIG_OF -static int s5m8767_pmic_dt_parse_dvs_gpio (struct sec_pmic_dev *iodev, +static int s5m8767_pmic_dt_parse_dvs_gpio (struct platform_device *pdev,struct sec_platform_data *pdata,struct device_node *pmic_np) {
@@ -489,7 +489,7 @@ static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev, gpio =of_get_named_gpio (pmic_np,"s5m8767,pmic-buck-dvs-gpios" , i);if (!gpio_is_valid (gpio)) { -dev_err (iodev->dev,"invalid gpio[%d]: %d\n" , i, gpio); +dev_err (&pdev->dev,"invalid gpio[%d]: %d\n" , i, gpio);return -EINVAL ; } pdata->buck_gpios[i] = gpio;
@@ -497,7 +497,7 @@ static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev,return 0 ; } -static int s5m8767_pmic_dt_parse_ds_gpio (struct sec_pmic_dev *iodev, +static int s5m8767_pmic_dt_parse_ds_gpio (struct platform_device *pdev,struct sec_platform_data *pdata,struct device_node *pmic_np) {
@@ -507,7 +507,7 @@ static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev, gpio =of_get_named_gpio (pmic_np,"s5m8767,pmic-buck-ds-gpios" , i);if (!gpio_is_valid (gpio)) { -dev_err (iodev->dev,"invalid gpio[%d]: %d\n" , i, gpio); +dev_err (&pdev->dev,"invalid gpio[%d]: %d\n" , i, gpio);return -EINVAL ; } pdata->buck_ds[i] = gpio;
@@ -515,9 +515,10 @@ static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,return 0 ; } -static int s5m8767_pmic_dt_parse_pdata (struct sec_pmic_dev *iodev, +static int s5m8767_pmic_dt_parse_pdata (struct platform_device *pdev,struct sec_platform_data *pdata) { +struct sec_pmic_dev *iodev =dev_get_drvdata (pdev->dev.parent);struct device_node *pmic_np, *regulators_np, *reg_np;struct sec_regulator_data *rdata;struct sec_opmode_data *rmode;
@@ -525,31 +526,31 @@ static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev, pmic_np = iodev->dev->of_node;if (!pmic_np) { -dev_err (iodev->dev,"could not find pmic sub-node\n" ); +dev_err (&pdev->dev,"could not find pmic sub-node\n" );return -ENODEV ; } regulators_np =of_find_node_by_name (pmic_np,"regulators" );if (!regulators_np) { -dev_err (iodev->dev,"could not find regulators sub-node\n" ); +dev_err (&pdev->dev,"could not find regulators sub-node\n" );return -EINVAL ; }/* count the number of regulators to be supported in pmic */ pdata->num_regulators =of_get_child_count (regulators_np); - rdata =devm_kzalloc (iodev->dev,sizeof (*rdata) * + rdata =devm_kzalloc (&pdev->dev,sizeof (*rdata) * pdata->num_regulators,GFP_KERNEL );if (!rdata) { -dev_err (iodev->dev, +dev_err (&pdev->dev,"could not allocate memory for regulator data\n" );return -ENOMEM ; } - rmode =devm_kzalloc (iodev->dev,sizeof (*rmode) * + rmode =devm_kzalloc (&pdev->dev,sizeof (*rmode) * pdata->num_regulators,GFP_KERNEL );if (!rdata) { -dev_err (iodev->dev, +dev_err (&pdev->dev,"could not allocate memory for regulator mode\n" );return -ENOMEM ; }
@@ -562,7 +563,7 @@ static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev,break ;if (i ==ARRAY_SIZE (regulators)) { -dev_warn (iodev->dev, +dev_warn (&pdev->dev,"don't know how to configure regulator %s\n" , reg_np->name);continue ;
@@ -570,13 +571,13 @@ static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev, rdata->id = i; rdata->initdata =of_get_regulator_init_data ( - iodev->dev, reg_np); + &pdev->dev, reg_np); rdata->reg_node = reg_np; rdata++; rmode->id = i;if (of_property_read_u32 (reg_np,"op_mode" , &rmode->mode)) { -dev_warn (iodev->dev, +dev_warn (&pdev->dev,"no op_mode property property at %s\n" , reg_np->full_name);
@@ -596,7 +597,7 @@ static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev,if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) { - ret =s5m8767_pmic_dt_parse_dvs_gpio (iodev, pdata, pmic_np); + ret =s5m8767_pmic_dt_parse_dvs_gpio (pdev, pdata, pmic_np);if (ret)return -EINVAL ;
@@ -607,42 +608,42 @@ static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev, } else {if (pdata->buck_default_idx >=8 ) { pdata->buck_default_idx =0 ; -dev_info (iodev->dev, +dev_info (&pdev->dev,"invalid value for default dvs index, use 0\n" ); } } dvs_voltage_nr =8 ; } - ret =s5m8767_pmic_dt_parse_ds_gpio (iodev, pdata, pmic_np); + ret =s5m8767_pmic_dt_parse_ds_gpio (pdev, pdata, pmic_np);if (ret)return -EINVAL ;if (of_property_read_u32_array (pmic_np,"s5m8767,pmic-buck2-dvs-voltage" , pdata->buck2_voltage, dvs_voltage_nr)) { -dev_err (iodev->dev,"buck2 voltages not specified\n" ); +dev_err (&pdev->dev,"buck2 voltages not specified\n" );return -EINVAL ; }if (of_property_read_u32_array (pmic_np,"s5m8767,pmic-buck3-dvs-voltage" , pdata->buck3_voltage, dvs_voltage_nr)) { -dev_err (iodev->dev,"buck3 voltages not specified\n" ); +dev_err (&pdev->dev,"buck3 voltages not specified\n" );return -EINVAL ; }if (of_property_read_u32_array (pmic_np,"s5m8767,pmic-buck4-dvs-voltage" , pdata->buck4_voltage, dvs_voltage_nr)) { -dev_err (iodev->dev,"buck4 voltages not specified\n" ); +dev_err (&pdev->dev,"buck4 voltages not specified\n" );return -EINVAL ; }return 0 ; }#else -static int s5m8767_pmic_dt_parse_pdata (struct sec_pmic_dev *iodev, +static int s5m8767_pmic_dt_parse_pdata (struct platform_device *pdev,struct sec_platform_data *pdata) {return 0 ;
@@ -659,13 +660,13 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)int i, ret, size, buck_init;if (iodev->dev->of_node) { - ret =s5m8767_pmic_dt_parse_pdata (iodev, pdata); + ret =s5m8767_pmic_dt_parse_pdata (pdev, pdata);if (ret)return ret; }if (!pdata) { -dev_err (pdev->dev.parent,"Platform data not supplied\n" ); +dev_err (&pdev->dev,"Platform data not supplied\n" );return -ENODEV ; }
Signature · 1 line
1.7.9.5
Re: [PATCH 2/3] regulator: s5m8767: Fix using wrong dev argument at various places
Quoted 1 line · Axel Lin
Use
&pdev->devrather thaniodev->devfordev_err(),dev_warn()anddev_info().
It's not clear to me that this is actually an improvement, the pdev is mostly just an internal Linux implementation detail so it's common to use the physical device for MFD logging in order to help the user understand what's causing the log message.
Quoted 2 lines
Use
&pdev->devrather thaniodev->devfordevm_kzalloc()andof_get_regulator_init_data(), this fixes memory leak.
This is a good fix though. This sort of thing is one reason for splitting out unrelated changes.
Re: [PATCH 2/3] regulator: s5m8767: Fix using wrong dev argument at various places
2013/2/8, Mark Brown <[email protected]>:
Quoted 9 lines · Axel Lin
Quoted 3 lines
Use
&pdev->devrather thaniodev->devfordev_err(),dev_warn()anddev_info().It's not clear to me that this is actually an improvement, the pdev is mostly just an internal Linux implementation detail so it's common to use the physical device for MFD logging in order to help the user understand what's causing the log message.
My understanding is if people (at least it's me) found some error message in dmesg, they usually grep the driver that emit the error message. If we use the parent device here, people might grep wrong files.
Quoted 6 lines
Quoted 3 lines
Use
&pdev->devrather thaniodev->devfordevm_kzalloc()andof_get_regulator_init_data(), this fixes memory leak.This is a good fix though. This sort of thing is one reason for splitting out unrelated changes.
Ok. I'll resend the patchs (for one topic a patch) a few days latter. (It's Chinese New Year vacation in Taiwan now.)
PATCH 3/3 regulator: s5m8767: Prevent possible NULL pointer dereference
In reply to Axel Lins5m8767_pmic_dt_parse_pdata dereferenes pdata, thus check pdata earlier to avoid NULL pointer dereference.
--- drivers/regulator/s5m8767.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/regulator/s5m8767.c +5 -5
@@ -659,17 +659,17 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)struct s5m8767_info *s5m8767;int i, ret, size, buck_init; +if (!pdata) { +dev_err (&pdev->dev,"Platform data not supplied\n" ); +return -ENODEV ; + } +if (iodev->dev->of_node) { ret =s5m8767_pmic_dt_parse_pdata (pdev, pdata);if (ret)return ret; } -if (!pdata) { -dev_err (&pdev->dev,"Platform data not supplied\n" ); -return -ENODEV ; - } -if (pdata->buck2_gpiodvs) {if (pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) {dev_err (&pdev->dev,"S5M8767 GPIO DVS NOT VALID\n" );
Signature · 1 line
1.7.9.5
Mark Brown
AppliedQuoted 1 line · Axel Lin
Signed-off-by Axel Lin <[email protected]>
Applied, thanks.