Skip to contentSkip to conversation

Added support for pogoplug e02 (pink/gray)

PATCH New Christoph Junghans 2 participants 2 messages Feb 10, 2013 – Feb 11, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Added support for pogoplug e02 (pink/gray)

The pogoplug differs from the SheevaPlug only by a few details, but especially in the led assignments. This patch was tested under Gentoo Linux.
A version of this patch was included in Arch Linux on Arm since Jan 2012:
https://github.com/archlinuxarm/PKGBUILDs/pull/124
A similar patch is available for OpenWrt:
http://patchwork.openwrt.org/patch/1412/

---
 arch/arm/configs/kirkwood_defconfig     |   1 +
 arch/arm/mach-kirkwood/Kconfig          |   8 +++
 arch/arm/mach-kirkwood/Makefile         |   1 +
 arch/arm/mach-kirkwood/pogo_e02-setup.c | 122 ++++++++++++++++++++++++++++++++
 4 files changed, 132 insertions(+)
 create mode 100644 arch/arm/mach-kirkwood/pogo_e02-setup.c
arch/arm/configs/kirkwood_defconfig +1 -0
index 93f3794..9a41bd7 100644
@@ -38,6 +38,7 @@ CONFIG_MACH_TOPKICK_DT=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
 CONFIG_MACH_DOCKSTAR=y
+CONFIG_MACH_POGO_E02=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
 CONFIG_MACH_OPENRD_ULTIMATE=y
arch/arm/mach-kirkwood/Kconfig +8 -0
index f91cdff..b17ee5c 100644
@@ -214,6 +214,14 @@ config MACH_DOCKSTAR
 	  Say 'Y' here if you want your kernel to support the
 	  Seagate FreeAgent DockStar.
 
+config MACH_POGO_E02
+	bool "CE Pogoplug E02"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  CloudEngines Pogoplug e02 (pink/gray). It differs from Marvell's
+	  SheevaPlug Reference Board by a few details, but
+	  especially in the led assignments.
+
 config MACH_OPENRD
         bool
 
arch/arm/mach-kirkwood/Makefile +1 -0
index 8d2e5a9..d982136 100644
@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
 obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
+obj-$(CONFIG_MACH_POGO_E02)		+= pogo_e02-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
arch/arm/mach-kirkwood/pogo_e02-setup.c new file +122 -0

122 lines not on this page · raw message

Signature · 1 line
1.7.12.4
#1 lore raw

PATCH 1/1 Added support for pogoplug e02 (pink/gray)

Dear Christoph Junghans,

Quoted 10 lines · Christoph Junghans

The pogoplug differs from the SheevaPlug only by a few details, but especially in the led assignments. This patch was tested under Gentoo Linux.
A version of this patch was included in Arch Linux on Arm since Jan 2012:
https://github.com/archlinuxarm/PKGBUILDs/pull/124
A similar patch is available for OpenWrt:
http://patchwork.openwrt.org/patch/1412/

All new platforms should be supported by adding a Device Tree source file, rather than using old-style C board files. Could you convert this to the Device Tree and resubmit?

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com