Skip to contentSkip to conversation

staging/rtl8187se: Remove code without effect

PATCH In review Peter Huewe 1 participant 10 messages Feb 13, 2013 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/9 staging/rtl8187se: Remove code without effect

Local variable AcmCtrl is never read/used after assignment so we can remove all assignments to it and the related code around the assignments.

---
 drivers/staging/rtl8187se/r8185b_init.c |   49 +------------------------------
 1 files changed, 1 insertions(+), 48 deletions(-)
drivers/staging/rtl8187se/r8185b_init.c +1 -48
index f1db9e4..41419f0 100644
@@ -964,54 +964,7 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
 					break;
 				}
 
-				/* Cehck ACM bit. */
-				/* If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.	*/
-				{
-					PACI_AIFSN	pAciAifsn = (PACI_AIFSN)(&pAcParam->f.AciAifsn);
-					AC_CODING	eACI = pAciAifsn->f.ACI;
-
-					/*for 8187B AsynIORead issue */
-					u8	AcmCtrl = 0;
-					if (pAciAifsn->f.ACM) {
-						/* ACM bit is 1. */
-						switch (eACI) {
-						case AC0_BE:
-							AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */
-							break;
-
-						case AC2_VI:
-							AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */
-							break;
-
-						case AC3_VO:
-							AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */
-							break;
-
-						default:
-							DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed: eACI is %d\n", eACI);
-							break;
-						}
-					} else {
-						/* ACM bit is 0. */
-						switch (eACI) {
-						case AC0_BE:
-							AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */
-							break;
-
-						case AC2_VI:
-							AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */
-							break;
-
-						case AC3_VO:
-							AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */
-							break;
-
-						default:
-							break;
-						}
-					}
-					write_nic_byte(dev, ACM_CONTROL, 0);
-				}
+				write_nic_byte(dev, ACM_CONTROL, 0);
 			}
 		}
 	}
Signature · 1 line
1.7.8.6
#1 lore raw

PATCH 2/9 staging/rtl8187se: Remove code without effect

The local variable u4bAcParam is never read/used after assignment, thus we can remove the declaration, assignment and any related code.

-> the local variables u1bAIFS, eACI and pAcParam can also be removed.

---
 drivers/staging/rtl8187se/r8185b_init.c |   39 +------------------------------
 1 files changed, 1 insertions(+), 38 deletions(-)
drivers/staging/rtl8187se/r8185b_init.c +1 -38
index 41419f0..5495d1e 100644
@@ -928,44 +928,7 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
 
 		for (eACI = 0; eACI < AC_MAX; eACI++) {
 			AcParam.f.AciAifsn.f.ACI = (u8)eACI;
-			{
-				PAC_PARAM	pAcParam = (PAC_PARAM)(&AcParam);
-				AC_CODING	eACI;
-				u8		u1bAIFS;
-				u32		u4bAcParam;
-
-				/*  Retrieve parameters to update. */
-				eACI = pAcParam->f.AciAifsn.f.ACI;
-				u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime;
-				u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET)	|
-						(((u32)(pAcParam->f.Ecw.f.ECWmax)) << AC_PARAM_ECW_MAX_OFFSET)	|
-						(((u32)(pAcParam->f.Ecw.f.ECWmin)) << AC_PARAM_ECW_MIN_OFFSET)	|
-						(((u32)u1bAIFS) << AC_PARAM_AIFS_OFFSET));
-
-				switch (eACI) {
-				case AC1_BK:
-					/* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
-					break;
-
-				case AC0_BE:
-					/* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
-					break;
-
-				case AC2_VI:
-					/* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
-					break;
-
-				case AC3_VO:
-					/* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
-					break;
-
-				default:
-					DMESGW("SetHwReg8185(): invalid ACI: %d !\n", eACI);
-					break;
-				}
-
-				write_nic_byte(dev, ACM_CONTROL, 0);
-			}
+			write_nic_byte(dev, ACM_CONTROL, 0);
 		}
 	}
 }
Signature · 1 line
1.7.8.6
#2 lore raw

PATCH 3/9 staging/rtl8187se: Remove code without effect

In reply to Peter Huewe

The local variable AcParam is only assigned to but not read/used afterwards, thus it and all related code can be removed.

The bFollowLegacySetting variable and check can also be removed as it is always true.

---
 drivers/staging/rtl8187se/r8185b_init.c |   35 +-----------------------------
 1 files changed, 2 insertions(+), 33 deletions(-)
drivers/staging/rtl8187se/r8185b_init.c +2 -33
index 5495d1e..4aca954 100644
@@ -869,8 +869,6 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
 	struct		r8180_priv *priv = ieee80211_priv(dev);
 	struct		ieee80211_device *ieee = priv->ieee80211;
 	AC_CODING	eACI;
-	AC_PARAM	AcParam;
-	u8		bFollowLegacySetting = 0;
 	u8		u1bAIFS;
 
 	/*
@@ -899,37 +897,8 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
 
 	write_nic_byte(dev, AckTimeOutReg, 0x5B); /* <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
 
-	{ /* Legacy 802.11. */
-		bFollowLegacySetting = 1;
-
-	}
-
-	/* this setting is copied from rtl8187B.  xiong-2006-11-13 */
-	if (bFollowLegacySetting) {
-
-		/*
-		 *	Follow 802.11 seeting to AC parameter, all AC shall use the same parameter.
-		 *	2005.12.01, by rcnjko.
-		 */
-		AcParam.longData = 0;
-		AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS.	*/
-		AcParam.f.AciAifsn.f.ACM = 0;
-		AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */
-		AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */
-		AcParam.f.TXOPLimit = 0;
-
-		/* lzm reserved 080826 */
-		/* For turbo mode setting. port from 87B by Isaiah 2008-08-01 */
-		if (ieee->current_network.Turbo_Enable == 1)
-			AcParam.f.TXOPLimit = 0x01FF;
-		/* For 87SE with Intel 4965  Ad-Hoc mode have poor throughput (19MB) */
-		if (ieee->iw_mode == IW_MODE_ADHOC)
-			AcParam.f.TXOPLimit = 0x0020;
-
-		for (eACI = 0; eACI < AC_MAX; eACI++) {
-			AcParam.f.AciAifsn.f.ACI = (u8)eACI;
-			write_nic_byte(dev, ACM_CONTROL, 0);
-		}
+	for (eACI = 0; eACI < AC_MAX; eACI++) {
+		write_nic_byte(dev, ACM_CONTROL, 0);
 	}
 }
 
Signature · 1 line
1.7.8.6
#3 lore raw

PATCH 4/9 staging/rtl8187se: Remove unused/unnecessary variables

In reply to Peter Huewe

The local variables priv and ieee are not used and thus can be removed. The local variable u1bAIFS is not used/read after assignment and thus can be removed.

---
 drivers/staging/rtl8187se/r8185b_init.c |    5 -----
 1 files changed, 0 insertions(+), 5 deletions(-)
drivers/staging/rtl8187se/r8185b_init.c +0 -5
index 4aca954..1e54ead 100644
@@ -866,10 +866,7 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
 				   WIRELESS_MODE WirelessMode,
 				   PCHANNEL_ACCESS_SETTING ChnlAccessSetting)
 {
-	struct		r8180_priv *priv = ieee80211_priv(dev);
-	struct		ieee80211_device *ieee = priv->ieee80211;
 	AC_CODING	eACI;
-	u8		u1bAIFS;
 
 	/*
 	 *	<RJ_TODO_8185B>
@@ -891,8 +888,6 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
 	write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer);
 	write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */
 
-	u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer);
-
 	write_nic_byte(dev, EIFS, ChnlAccessSetting->EIFS_Timer);
 
 	write_nic_byte(dev, AckTimeOutReg, 0x5B); /* <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
Signature · 1 line
1.7.8.6
#4 lore raw

PATCH 5/9 staging/rtl8187se: Reuse ReadBBPortUchar to avoid duplicated code

In reply to Peter Huewe

WriteBBPortUchar reimplements ReadBBPortUchar in its body, so we can remove the duplicated code by calling ReadBBPortUchar directly.

Unfortunately we have to move ReadBBPortUchar around; while at it we can also get rid of the temporary variable for the return value.

Also we can remove the local variables UCharData and RegisterContent in WriteBBPortUchar as they are not used / without effect.

Both functions are only 'local' so we can mark them as static.

---
 drivers/staging/rtl8187se/r8185b_init.c |   30 +++++++-----------------------
 1 files changed, 7 insertions(+), 23 deletions(-)
drivers/staging/rtl8187se/r8185b_init.c +7 -23
index 1e54ead..a3b836c 100644
@@ -287,35 +287,19 @@ u16 RF_ReadReg(struct net_device *dev, u8 offset)
 	return reg;
 }
 
+static u8 ReadBBPortUchar(struct net_device *dev, u32 addr)
+{
+	PlatformIOWrite4Byte(dev, PhyAddr, addr & 0xffffff7f);
+	return PlatformIORead1Byte(dev, PhyDataR);
+}
 
 /* by Owen on 04/07/14 for writing BB register successfully */
-void WriteBBPortUchar(struct net_device *dev, u32 Data)
+static void WriteBBPortUchar(struct net_device *dev, u32 Data)
 {
-	/* u8	TimeoutCounter; */
-	u8	RegisterContent;
-	u8	UCharData;
-
-	UCharData = (u8)((Data & 0x0000ff00) >> 8);
 	PlatformIOWrite4Byte(dev, PhyAddr, Data);
-	/* for(TimeoutCounter = 10; TimeoutCounter > 0; TimeoutCounter--) */
-	{
-		PlatformIOWrite4Byte(dev, PhyAddr, Data & 0xffffff7f);
-		RegisterContent = PlatformIORead1Byte(dev, PhyDataR);
-		/*if(UCharData == RegisterContent)	*/
-		/*	break;	*/
-	}
+	ReadBBPortUchar(dev, Data);
 }
 
-u8 ReadBBPortUchar(struct net_device *dev, u32 addr)
-{
-	/*u8	TimeoutCounter; */
-	u8	RegisterContent;
-
-	PlatformIOWrite4Byte(dev, PhyAddr, addr & 0xffffff7f);
-	RegisterContent = PlatformIORead1Byte(dev, PhyDataR);
-
-	return RegisterContent;
-}
 /*
  *	Description:
  *	Perform Antenna settings with antenna diversity on 87SE.
Signature · 1 line
1.7.8.6
#5 lore raw

PATCH 6/9 staging/rtl8187se: Remove temporary variable for return value

In reply to Peter Huewe

The simple PlatformIORead1Byte function doesn't need to store its return value in a temporary variable; rather simply return the value directly.

By moving the function to the top we can also get rid of the forward declaration.

The wrapper functions could be easily replaced by direct calls to read_nic_byte but is kept for readability.

Since this functions is local only we can mark it as static.

---
 drivers/staging/rtl8187se/r8185b_init.c |   17 +++++------------
 1 files changed, 5 insertions(+), 12 deletions(-)
drivers/staging/rtl8187se/r8185b_init.c +5 -12
index a3b836c..1dfa78e 100644
@@ -115,6 +115,11 @@ static u8 OFDM_CONFIG[]	= {
 	 *---------------------------------------------------------------
 	 */
 
+static u8 PlatformIORead1Byte(struct net_device *dev, u32 offset)
+{
+	return read_nic_byte(dev, offset);
+}
+
 void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
 {
 	write_nic_byte(dev, offset, data);
@@ -127,8 +132,6 @@ void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
 	read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 }
 
-u8 PlatformIORead1Byte(struct net_device *dev, u32 offset);
-
 void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 {
 	if (offset == PhyAddr) {
@@ -172,16 +175,6 @@ void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 	}
 }
 
-u8 PlatformIORead1Byte(struct net_device *dev, u32 offset)
-{
-	u8	data = 0;
-
-	data = read_nic_byte(dev, offset);
-
-
-	return data;
-}
-
 u16 PlatformIORead2Byte(struct net_device *dev, u32 offset)
 {
 	u16	data = 0;
Signature · 1 line
1.7.8.6
#6 lore raw

PATCH 7/9 staging/rtl8187se: Remove unused functions PlatformIORead2Byte / PlatformIORead4Byte

In reply to Peter Huewe

These two functions PlatformIORead2Byte and PlatformIORead4Byte are unused and thus can be removed.

---
 drivers/staging/rtl8187se/r8185b_init.c |   20 --------------------
 1 files changed, 0 insertions(+), 20 deletions(-)
drivers/staging/rtl8187se/r8185b_init.c +0 -20
index 1dfa78e..005fb0b 100644
@@ -175,26 +175,6 @@ void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 	}
 }
 
-u16 PlatformIORead2Byte(struct net_device *dev, u32 offset)
-{
-	u16	data = 0;
-
-	data = read_nic_word(dev, offset);
-
-
-	return data;
-}
-
-u32 PlatformIORead4Byte(struct net_device *dev, u32 offset)
-{
-	u32	data = 0;
-
-	data = read_nic_dword(dev, offset);
-
-
-	return data;
-}
-
 void SetOutputEnableOfRfPins(struct net_device *dev)
 {
 	write_nic_word(dev, RFPinsEnable, 0x1bff);
Signature · 1 line
1.7.8.6
#7 lore raw

PATCH 8/9 staging/rtl8187se: Remove duplicated code by using an offset

In reply to Peter Huewe

In SetAntennaConfig87SE both branches of if (bAntDiversity) do exactly the same, except that there is an offset of 0x80 for the register values if bAntDiversity is true.

-> Consolidate both branches and assign the offset if necessary.

---
 drivers/staging/rtl8187se/r8185b_init.c |   76 +++++++++++--------------------
 1 files changed, 26 insertions(+), 50 deletions(-)
drivers/staging/rtl8187se/r8185b_init.c +26 -50
index 005fb0b..2ca857d 100644
@@ -284,62 +284,38 @@ bool SetAntennaConfig87SE(struct net_device *dev,
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool   bAntennaSwitched = true;
+	u8	ant_diversity_offset = 0x00; /* 0x00 = disabled, 0x80 = enabled */
 
 	/* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */
 
 	/* Threshold for antenna diversity. */
 	write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */
 
-	if (bAntDiversity) {	/*	Enable Antenna Diversity. */
-		if (DefaultAnt == 1) {	/* aux antenna */
-
-			/* Mac register, aux antenna */
-			write_nic_byte(dev, ANTSEL, 0x00);
-
-			/* Config CCK RX antenna. */
-			write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
-			write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */
-
-			/* Config OFDM RX antenna. */
-			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
-			write_phy_ofdm(dev, 0x18, 0xb2);	/* Reg18 : b2 */
-		} else { /*  use main antenna */
-			/* Mac register, main antenna */
-			write_nic_byte(dev, ANTSEL, 0x03);
-			/* base band */
-			/*  Config CCK RX antenna. */
-			write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
-			write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */
-
-			/* Config OFDM RX antenna. */
-			write_phy_ofdm(dev, 0x0d, 0x5c);  /* Reg0d : 5c	*/
-			write_phy_ofdm(dev, 0x18, 0xb2);  /* Reg18 : b2	*/
-		}
-	} else {
-		/* Disable Antenna Diversity. */
-		if (DefaultAnt == 1) { /* aux Antenna */
-			/* Mac register, aux antenna */
-			write_nic_byte(dev, ANTSEL, 0x00);
-
-			/* Config CCK RX antenna. */
-			write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
-			write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */
-
-			/* Config OFDM RX antenna. */
-			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
-			write_phy_ofdm(dev, 0x18, 0x32);	/* Reg18 : 32 */
-		} else { /* main Antenna */
-			/* Mac register, main antenna */
-			write_nic_byte(dev, ANTSEL, 0x03);
-
-			/* Config CCK RX antenna.	*/
-			write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
-			write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */
-
-			/* Config OFDM RX antenna. */
-			write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
-			write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */
-		}
+	if (bAntDiversity)	/*	Enable Antenna Diversity. */
+		ant_diversity_offset = 0x80;
+
+	if (DefaultAnt == 1) { /* aux Antenna */
+		/* Mac register, aux antenna */
+		write_nic_byte(dev, ANTSEL, 0x00);
+
+		/* Config CCK RX antenna. */
+		write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
+		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset); /* Reg01 : 47 | ant_diversity_offset */
+
+		/* Config OFDM RX antenna. */
+		write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
+		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);	/* Reg18 : 32 */
+	} else { /* main Antenna */
+		/* Mac register, main antenna */
+		write_nic_byte(dev, ANTSEL, 0x03);
+
+		/* Config CCK RX antenna.	*/
+		write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
+		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset); /* Reg01 : 47 */
+
+		/* Config OFDM RX antenna. */
+		write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
+		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset); /*Reg18 : 32 */
 	}
 	priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
 	return	bAntennaSwitched;
Signature · 1 line
1.7.8.6
#8 lore raw

PATCH 9/9 staging/rtl8187se: Mark functions as static to silence sparse

In reply to Peter Huewe

Sparse complains that some functions can be declared as static:
123:6: warning: symbol 'PlatformIOWrite1Byte' was not declared. Should it be static? 129:6: warning: symbol 'PlatformIOWrite2Byte' was not declared. Should it be static? 135:6: warning: symbol 'PlatformIOWrite4Byte' was not declared. Should it be static? 178:6: warning: symbol 'SetOutputEnableOfRfPins' was not declared. Should it be static? 354:6: warning: symbol 'ZEBRA_Config_85BASIC_HardCode' was not declared. Should it be static? 655:6: warning: symbol 'InitTxPwrTracking87SE' was not declared. Should it be static? 665:6: warning: symbol 'PhyConfig8185' was not declared. Should it be static? 692:6: warning: symbol 'HwConfigureRTL8185' was not declared. Should it be static? 817:4: warning: symbol 'GetSupportedWirelessMode8185' was not declared. Should it be static? 822:6: warning: symbol 'ActUpdateChannelAccessSetting' was not declared. Should it be static? 857:6: warning: symbol 'ActSetWirelessMode8185' was not declared. Should it be static? 914:6: warning: symbol 'MgntDisconnectIBSS' was not declared. Should it be static? 940:6: warning: symbol 'MlmeDisassociateRequest' was not declared. Should it be static? 957:6: warning: symbol 'MgntDisconnectAP' was not declared. Should it be static? 975:6: warning: symbol 'MgntDisconnect' was not declared. Should it be static? 1011:6: warning: symbol 'SetRFPowerState' was not declared. Should it be static? 1115:6: warning: symbol 'InactivePowerSave' was not declared. Should it be static?

-> Add the static keyword.

---
 drivers/staging/rtl8187se/r8185b_init.c |   34 +++++++++++++++---------------
 1 files changed, 17 insertions(+), 17 deletions(-)
drivers/staging/rtl8187se/r8185b_init.c +17 -17
index 2ca857d..978dc5f 100644
@@ -120,19 +120,19 @@ static u8 PlatformIORead1Byte(struct net_device *dev, u32 offset)
 	return read_nic_byte(dev, offset);
 }
 
-void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
+static void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
 {
 	write_nic_byte(dev, offset, data);
 	read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 }
 
-void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
+static void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
 {
 	write_nic_word(dev, offset, data);
 	read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 }
 
-void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
+static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 {
 	if (offset == PhyAddr) {
 	/* For Base Band configuration. */
@@ -175,7 +175,7 @@ void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 	}
 }
 
-void SetOutputEnableOfRfPins(struct net_device *dev)
+static void SetOutputEnableOfRfPins(struct net_device *dev)
 {
 	write_nic_word(dev, RFPinsEnable, 0x1bff);
 }
@@ -327,7 +327,7 @@ bool SetAntennaConfig87SE(struct net_device *dev,
  *--------------------------------------------------------------
  */
 
-void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
+static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 {
 
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -628,7 +628,7 @@ void UpdateInitialGain(struct net_device *dev)
  *		Tx Power tracking mechanism routine on 87SE.
  *	Created by Roger, 2007.12.11.
  */
-void InitTxPwrTracking87SE(struct net_device *dev)
+static void InitTxPwrTracking87SE(struct net_device *dev)
 {
 	u32	u4bRfReg;
 
@@ -638,7 +638,7 @@ void InitTxPwrTracking87SE(struct net_device *dev)
 	RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);			mdelay(1);
 }
 
-void PhyConfig8185(struct net_device *dev)
+static void PhyConfig8185(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 		write_nic_dword(dev, RCR, priv->ReceiveConfig);
@@ -665,7 +665,7 @@ void PhyConfig8185(struct net_device *dev)
 	return;
 }
 
-void HwConfigureRTL8185(struct net_device *dev)
+static void HwConfigureRTL8185(struct net_device *dev)
 {
 	/* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */
 	u8 bUNIVERSAL_CONTROL_RL = 0;
@@ -790,12 +790,12 @@ static void MacConfig_85BASIC(struct net_device *dev)
 	write_nic_byte(dev, 0x24E, 0x01);
 }
 
-u8 GetSupportedWirelessMode8185(struct net_device *dev)
+static u8 GetSupportedWirelessMode8185(struct net_device *dev)
 {
 	return WIRELESS_MODE_B | WIRELESS_MODE_G;
 }
 
-void ActUpdateChannelAccessSetting(struct net_device *dev,
+static void ActUpdateChannelAccessSetting(struct net_device *dev,
 				   WIRELESS_MODE WirelessMode,
 				   PCHANNEL_ACCESS_SETTING ChnlAccessSetting)
 {
@@ -830,7 +830,7 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
 	}
 }
 
-void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
+static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
 {
 	struct  r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	struct  ieee80211_device *ieee = priv->ieee80211;
@@ -887,7 +887,7 @@ void rtl8185b_irq_enable(struct net_device *dev)
 	write_nic_dword(dev, IMR, priv->IntrMask);
 }
 
-void MgntDisconnectIBSS(struct net_device *dev)
+static void MgntDisconnectIBSS(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	u8 i;
@@ -913,7 +913,7 @@ void MgntDisconnectIBSS(struct net_device *dev)
 	notify_wx_assoc_event(priv->ieee80211);
 }
 
-void MlmeDisassociateRequest(struct net_device *dev, u8 *asSta, u8 asRsn)
+static void MlmeDisassociateRequest(struct net_device *dev, u8 *asSta, u8 asRsn)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	u8 i;
@@ -930,7 +930,7 @@ void MlmeDisassociateRequest(struct net_device *dev, u8 *asSta, u8 asRsn)
 	}
 }
 
-void MgntDisconnectAP(struct net_device *dev, u8 asRsn)
+static void MgntDisconnectAP(struct net_device *dev, u8 asRsn)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
@@ -948,7 +948,7 @@ void MgntDisconnectAP(struct net_device *dev, u8 asRsn)
 	priv->ieee80211->state = IEEE80211_NOLINK;
 }
 
-bool MgntDisconnect(struct net_device *dev, u8 asRsn)
+static bool MgntDisconnect(struct net_device *dev, u8 asRsn)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	/*
@@ -984,7 +984,7 @@ bool MgntDisconnect(struct net_device *dev, u8 asRsn)
  *	Assumption:
  *		PASSIVE LEVEL.
  */
-bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
+static bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
 {
 	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool	bResult = false;
@@ -1088,7 +1088,7 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u
 	return bActionAllowed;
 }
 
-void InactivePowerSave(struct net_device *dev)
+static void InactivePowerSave(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	/*
Signature · 1 line
1.7.8.6
#9 lore raw
In reply to Peter Huewe

Am Mittwoch, 13. Februar 2013, 03:54:26 schrieb Peter Huewe:

Quoted 4 lines

Local variable AcmCtrl is never read/used after assignment so we can remove all assignments to it and the related code around the assignments.

Sorry wrong distribution list.
Seems my script went a bit nuts.

Will resend with correct list.

Sorry for the noise.

Peter