iw: Add VHT info in link query
PATCH 1/1 iw: Add VHT info in link query
Show VHT mcs, nss and bw, if present, in
iw dev link.
Eg.,
Connected to 10:6f:3f:4d:94:b4 (on mlan0)
SSID: 122920
freq: 5180
RX: 0 bytes (0 packets)
TX: 88 bytes (1 packets)
signal: -51 dBm
tx bitrate: 650.0 MBit/s VHT-MCS 7 80Mhz short GI VHT-NSS 2
bss flags:
dtim period: 1
beacon int: 100
Signed-off-by Yogesh Ashok Powar <[email protected]>
--- link.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
link.c +10 -0
@@ -187,10 +187,20 @@ static int print_link_sta(struct nl_msg *msg, void *arg)if (rinfo[NL80211_RATE_INFO_MCS ])printf (" MCS %d" ,nla_get_u8 (rinfo[NL80211_RATE_INFO_MCS ])); +if (rinfo[NL80211_RATE_INFO_VHT_MCS ]) +printf (" VHT-MCS %d" ,nla_get_u8 (rinfo[NL80211_RATE_INFO_VHT_MCS ]));if (rinfo[NL80211_RATE_INFO_40_MHZ_WIDTH ])printf (" 40Mhz" ); +if (rinfo[NL80211_RATE_INFO_80_MHZ_WIDTH ]) +printf (" 80Mhz" ); +if (rinfo[NL80211_RATE_INFO_80P80_MHZ_WIDTH ]) +printf (" 80P80Mhz" ); +if (rinfo[NL80211_RATE_INFO_160_MHZ_WIDTH ]) +printf (" 160Mhz" );if (rinfo[NL80211_RATE_INFO_SHORT_GI ])printf (" short GI" ); +if (rinfo[NL80211_RATE_INFO_VHT_NSS ]) +printf (" VHT-NSS %d" ,nla_get_u8 (rinfo[NL80211_RATE_INFO_VHT_NSS ]));printf ("\n" ); } }
Signature · 1 line
1.8.0.3
Johannes Berg
AppliedQuoted 2 lines · Yogesh Ashok Powar
Show VHT mcs, nss and bw, if present, in
iw dev link.
Applied, thanks. I also fixed "Mhz" to "MHz" in the new & existing code.
johannes
Quoted 4 lines
Quoted 2 lines
Show VHT mcs, nss and bw, if present, in
iw dev link.Applied, thanks. I also fixed "Mhz" to "MHz" in the new & existing code.
OK
Thanks
Yogesh