Skip to contentSkip to conversation

ARM: dove: update dove_defconfig with a few useful options

PATCH New Olof Johansson 3 participants 6 messages Jan 13, 2013 – Feb 19, 2013 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dove: update dove_defconfig with a few useful options

This refreshes the dove_defconfig, and adds:
PRINTK_TIME
DEVTMPFS
EXT4

They're quite useful, and allows booting a cubox ubuntu rootfs on SD card, since that by default uses ext4.

The rest of the churn is due to options and defaults moving around, no functional difference.

Cc Sebastian Hesselbarth <[email protected]>
---
 arch/arm/configs/dove_defconfig | 28 ++++++++--------------------
 1 file changed, 8 insertions(+), 20 deletions(-)
arch/arm/configs/dove_defconfig +8 -20
index 0b7ee92..3fe8dae 100644
@@ -1,26 +1,24 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y
 CONFIG_MACH_DOVE_DT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_HIGHMEM=y
-CONFIG_USE_OF=y
-CONFIG_ATAGS=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -32,8 +30,9 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -57,7 +56,6 @@ CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
 CONFIG_INPUT_POLLDEV=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
@@ -68,10 +66,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
@@ -81,13 +76,11 @@ CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 # CONFIG_HWMON is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_DOVE=y
 CONFIG_NEW_LEDS=y
@@ -104,6 +97,7 @@ CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -112,24 +106,20 @@ CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
@@ -138,7 +128,6 @@ CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
@@ -147,5 +136,4 @@ CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_LIBCRC32C=y
Signature · 1 line
1.8.1.192.gc4361b8
Applied
#1 lore raw

PATCH 1/1 ARM: dove: update dove_defconfig with a few useful options

Quoted 11 lines · Olof Johansson

This refreshes the dove_defconfig, and adds:
PRINTK_TIME
DEVTMPFS
EXT4

They're quite useful, and allows booting a cubox ubuntu rootfs on SD card, since that by default uses ext4.

The rest of the churn is due to options and defaults moving around, no functional difference.

Quoted 6 lines
Cc Sebastian Hesselbarth <[email protected]>
---
 arch/arm/configs/dove_defconfig | 28 ++++++++--------------------
 1 file changed, 8 insertions(+), 20 deletions(-)

Applied to mvebu/boards

thx,

Jason.

#2 lore raw

PATCH 1/1 ARM: dove: update dove_defconfig with a few useful options

Quoted 12 lines · Jason Cooper
Quoted 11 lines · Olof Johansson

This refreshes the dove_defconfig, and adds:
PRINTK_TIME
DEVTMPFS
EXT4

They're quite useful, and allows booting a cubox ubuntu rootfs on SD card, since that by default uses ext4.

The rest of the churn is due to options and defaults moving around, no functional difference.

Quoted 8 lines
Quoted 6 lines
Cc Sebastian Hesselbarth <[email protected]>
---
 arch/arm/configs/dove_defconfig | 28 ++++++++--------------------
 1 file changed, 8 insertions(+), 20 deletions(-)

Applied to mvebu/boards

Hi Olof,

I've just tried rebuilding the for-next branch, which turned out very easy this time, but this one patch is what stuck out: apparently you had already applied it into for-next, but it is not on any of the other branches. Do you know what is going on here?

Arnd

#3 lore raw

PATCH 1/1 ARM: dove: update dove_defconfig with a few useful options

Quoted 20 lines · Arnd Bergmann
Quoted 19 lines · Jason Cooper
Quoted 17 lines · Olof Johansson

This refreshes the dove_defconfig, and adds:
PRINTK_TIME
DEVTMPFS
EXT4

They're quite useful, and allows booting a cubox ubuntu rootfs on SD card, since that by default uses ext4.

The rest of the churn is due to options and defaults moving around, no functional difference.

Cc Sebastian Hesselbarth <[email protected]>
---
 arch/arm/configs/dove_defconfig | 28 ++++++++--------------------
 1 file changed, 8 insertions(+), 20 deletions(-)
Quoted 8 lines
Quoted 1 line

Applied to mvebu/boards

Hi Olof,

I've just tried rebuilding the for-next branch, which turned out very easy this time, but this one patch is what stuck out: apparently you had already applied it into for-next, but it is not on any of the other branches. Do you know what is going on here?

crap, should I not have pulled it?

thx,

Jason.

#4 lore raw

PATCH 1/1 ARM: dove: update dove_defconfig with a few useful options

Quoted 7 lines · Jason Cooper
Quoted 5 lines

I've just tried rebuilding the for-next branch, which turned out very easy this time, but this one patch is what stuck out: apparently you had already applied it into for-next, but it is not on any of the other branches. Do you know what is going on here?

crap, should I not have pulled it?

I don't think you did anything wrong with this, I just don't know why it's in for-next.

Was this part of your pull requests from last friday?

Arnd

#5 lore raw

PATCH 1/1 ARM: dove: update dove_defconfig with a few useful options

Quoted 11 lines · Arnd Bergmann
Quoted 7 lines · Jason Cooper
Quoted 5 lines

I've just tried rebuilding the for-next branch, which turned out very easy this time, but this one patch is what stuck out: apparently you had already applied it into for-next, but it is not on any of the other branches. Do you know what is going on here?

crap, should I not have pulled it?

I don't think you did anything wrong with this, I just don't know why it's in for-next.

You did nothing wrong, Jason. This was my mess-up, I was working on top of for-next instead of for-next~0, which I usually do when doing small local changes, and it accidentally got included in a push.

Quoted 1 line

Was this part of your pull requests from last friday?

I believe they were, yes. But I haven't looked much at those yet.

-Olof