ARM: bcm2835: fix I2C module clock rate
Subsystems (3)
PATCH 1/1 ARM: bcm2835: fix I2C module clock rate
BCM2835-ARM-Peripherals.pdf states that the I2C module's input clock is nominally 150MHz, and that value is currently reflected in bcm2835.dtsi. However, practical measurements show that the rate is actually 250MHz, and this agrees with various downstream kernels.
Switch the I2C clock's frequency to 250MHz so that the generated bus clock rate is accurate.
---
This is a bug-fix for 3.9.
arch/arm/boot/dts/bcm2835.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/bcm2835.dtsi +1 -1
@@ -105,7 +105,7 @@ compatible = "fixed-clock"; reg = <1>; #clock-cells = <0>; - clock-frequency = <150000000>; + clock-frequency = <250000000>; }; }; };
Signature · 1 line
1.7.10.4
Olof Johansson
AppliedPATCH 1/1 ARM: bcm2835: fix I2C module clock rate
Quoted 11 lines · Stephen Warren
BCM2835-ARM-Peripherals.pdf states that the I2C module's input clock is nominally 150MHz, and that value is currently reflected in
bcm2835.dtsi. However, practical measurements show that the rate is actually 250MHz, and this agrees with various downstream kernels.Switch the I2C clock's frequency to 250MHz so that the generated bus clock rate is accurate.
Signed-off-by Stephen Warren <[email protected]>---
This is a bug-fix for 3.9.
Applied.
-Olof