Skip to contentSkip to conversation

USB: add devicetree helpers for determining dr_mode and phy_type

PATCH New Marc Kleine-Budde 2 participants 26 messages Feb 27, 2013

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v5 cover USB: add devicetree helpers for determining dr_mode and phy_type

Hello, this is the 5th round of Sascha's patch series, rebased to Greg's usb-next.

Please consider to apply.

regards,
Marc

changes since v4:
- add support for USB_DR_MODE_DUAL_ROLE in dt helper

changes since v3:

- add phy patches (which were accidently already part of v2)
- Use OP_DEVLC instead of OP_PORTSC for lpm case
- Use enum usb_dr_mode ub ci_hdrc_probe()

changes since v2:

- fix adding of GPL Header was in wrong patch
- add missing hunk for new file of.c

changes since v1:
- move phy specific of helper to drivers/usb/phy/of.c
- use strcmp instead of strcasecmp for matching property values
- change usb_phy_dr_mode to usb_dr_mode
- change USBPHY_INTERFACE_MODE_NA to USBPHY_INTERFACE_MODE_UNKNOWN
- add copyright header to new files
- chipidea: drop mdelay at end of PTS/PTW setup
- chipidea: implement lpm core type handling for PTS/PTW

The following changes since commit 74e1a2a39355b2d3ae8c60c78d8add162c6d7183:

Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb (2013-02-21 12:20:00 -0800)

are available in the git repository at:

git://git.pengutronix.de/git/mkl/linux.git tags/usb-chipidea-for-next-v5

for you to fetch changes up to 1065bb064c06565cc0b86337d52977ab5afc3e90:

USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy (2013-02-27 12:54:13 +0100)

----------------------------------------------------------------
USB: chipidea patches for v3.10

These add OF helpers for handling the dr_mode and phy_type property and makes use of them in the chipidea driver.

----------------------------------------------------------------
Marc Kleine-Budde (1):
USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Michael Grzeschik (3):
USB: add devicetree helpers for determining dr_mode and phy_type USB chipidea: ci13xxx-imx: create dynamic platformdata USB chipidea: add PTW and PTS handling

Sascha Hauer (5):
USB: move bulk of otg/otg.c to phy/phy.c
USB chipidea: introduce dual role mode pdata flags USB chipidea i.MX: introduce dr_mode property
USB mxs-phy: Register phy with framework
USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy

 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    6 +
 drivers/usb/chipidea/bits.h                        |   14 +-
 drivers/usb/chipidea/ci13xxx_imx.c                 |   67 +--
 drivers/usb/chipidea/core.c                        |   61 ++-
 drivers/usb/otg/mxs-phy.c                          |    9 +
 drivers/usb/otg/otg.c                              |  423 -------------------
 drivers/usb/phy/Makefile                           |    2 +
 drivers/usb/phy/of.c                               |   47 +++
 drivers/usb/phy/phy.c                              |  438 ++++++++++++++++++++
 drivers/usb/usb-common.c                           |   37 ++
 include/linux/usb/chipidea.h                       |    3 +-
 include/linux/usb/of.h                             |   27 ++
 include/linux/usb/otg.h                            |    8 +
 include/linux/usb/phy.h                            |    9 +
 14 files changed, 689 insertions(+), 462 deletions(-)
 create mode 100644 drivers/usb/phy/of.c
 create mode 100644 drivers/usb/phy/phy.c
 create mode 100644 include/linux/usb/of.h
#1 lore raw

PATCH v5 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

In patch "5d3c28b usb: otg: add device tree support to otg library" devm_usb_get_phy_by_phandle() was added. It uses try_module_get() to lock the phy driver in memory. The corresponding module_put() is missing in that patch.

This patch adds try_module_get() to usb_get_phy() and usb_get_phy_dev(). Further the missing module_put() is added to usb_put_phy().

---
 drivers/usb/otg/otg.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/usb/otg/otg.c +7 -3
index e181439..2bd03d2 100644
@@ -130,7 +130,7 @@ struct usb_phy *usb_get_phy(enum usb_phy_type type)
 	spin_lock_irqsave(&phy_lock, flags);
 
 	phy = __usb_find_phy(&phy_list, type);
-	if (IS_ERR(phy)) {
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
 		pr_err("unable to find transceiver of type %s\n",
 			usb_phy_type_string(type));
 		goto err0;
@@ -228,7 +228,7 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
 	spin_lock_irqsave(&phy_lock, flags);
 
 	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
-	if (IS_ERR(phy)) {
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
 		pr_err("unable to find transceiver\n");
 		goto err0;
 	}
@@ -301,8 +301,12 @@ EXPORT_SYMBOL(devm_usb_put_phy);
  */
 void usb_put_phy(struct usb_phy *x)
 {
-	if (x)
+	if (x) {
+		struct module *owner = x->dev->driver->owner;
+
 		put_device(x->dev);
+		module_put(owner);
+	}
 }
 EXPORT_SYMBOL(usb_put_phy);
 
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Quoted 11 lines · Marc Kleine-Budde

In patch "5d3c28b usb: otg: add device tree support to otg library" devm_usb_get_phy_by_phandle() was added. It uses try_module_get() to lock the phy driver in memory. The corresponding module_put() is missing in that patch.

This patch adds try_module_get() to usb_get_phy() and usb_get_phy_dev(). Further the missing module_put() is added to usb_put_phy().

this one doesn't apply to my tree. What did you use as a base ?

Signature · 8 lines
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/3ebaefc6/attachment-0001.sig>
#3 lore raw

PATCH v5 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Quoted 8 lines · Felipe Balbi
Quoted 7 lines · Marc Kleine-Budde

In patch "5d3c28b usb: otg: add device tree support to otg library" devm_usb_get_phy_by_phandle() was added. It uses try_module_get() to lock the phy driver in memory. The corresponding module_put() is missing in that patch.

This patch adds try_module_get() to usb_get_phy() and usb_get_phy_dev(). Further the missing module_put() is added to usb_put_phy().

Quoted 6 lines
Quoted 4 lines

this one doesn't apply to my tree. What did you use as a base ?

As stated in the cover letter: Greg's usb-next.

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git

I'd really appreciate if this series goes into a single tree. So that other chipidea developers can base their work on this.

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/18b92a36/attachment.sig>
#4 lore raw

PATCH 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Hi,

Quoted 14 lines · Marc Kleine-Budde
Quoted 13 lines · Felipe Balbi
Quoted 11 lines · Marc Kleine-Budde

In patch "5d3c28b usb: otg: add device tree support to otg library" devm_usb_get_phy_by_phandle() was added. It uses try_module_get() to lock the phy driver in memory. The corresponding module_put() is missing in that patch.

This patch adds try_module_get() to usb_get_phy() and usb_get_phy_dev(). Further the missing module_put() is added to usb_put_phy().

Quoted 8 lines
Quoted 1 line

this one doesn't apply to my tree. What did you use as a base ?

As stated in the cover letter: Greg's usb-next.

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git

I'd really appreciate if this series goes into a single tree. So that other chipidea developers can base their work on this.

it eventually will all go through Greg's queue, but drivers/usb/phy and drivers/usb/otg/ needs to go through my tree so we avoid conflicts later, sorry.

Signature · 8 lines
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/f4da2ecb/attachment.sig>
#5 lore raw

PATCH v5 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Quoted 21 lines · Felipe Balbi

Hi,

Quoted 18 lines · Marc Kleine-Budde
Quoted 8 lines · Felipe Balbi
Quoted 7 lines · Marc Kleine-Budde

In patch "5d3c28b usb: otg: add device tree support to otg library" devm_usb_get_phy_by_phandle() was added. It uses try_module_get() to lock the phy driver in memory. The corresponding module_put() is missing in that patch.

This patch adds try_module_get() to usb_get_phy() and usb_get_phy_dev(). Further the missing module_put() is added to usb_put_phy().

Quoted 6 lines
Quoted 4 lines

this one doesn't apply to my tree. What did you use as a base ?

As stated in the cover letter: Greg's usb-next.

Quoted 8 lines
Quoted 4 lines

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git

I'd really appreciate if this series goes into a single tree. So that other chipidea developers can base their work on this.

it eventually will all go through Greg's queue, but drivers/usb/phy and drivers/usb/otg/ needs to go through my tree so we avoid conflicts later, sorry.

Oh - this is going to be complicated. I'll rip the series into 3 parts and repost.

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/32bc30ce/attachment.sig>
#6 lore raw

PATCH 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Quoted 27 lines · Marc Kleine-Budde
Quoted 26 lines · Felipe Balbi

Hi,

Quoted 22 lines · Marc Kleine-Budde
Quoted 8 lines · Felipe Balbi
Quoted 7 lines · Marc Kleine-Budde

In patch "5d3c28b usb: otg: add device tree support to otg library" devm_usb_get_phy_by_phandle() was added. It uses try_module_get() to lock the phy driver in memory. The corresponding module_put() is missing in that patch.

This patch adds try_module_get() to usb_get_phy() and usb_get_phy_dev(). Further the missing module_put() is added to usb_put_phy().

Quoted 6 lines
Quoted 4 lines

this one doesn't apply to my tree. What did you use as a base ?

As stated in the cover letter: Greg's usb-next.

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git

I'd really appreciate if this series goes into a single tree. So that other chipidea developers can base their work on this.

Quoted 6 lines
Quoted 3 lines

it eventually will all go through Greg's queue, but drivers/usb/phy and drivers/usb/otg/ needs to go through my tree so we avoid conflicts later, sorry.

Oh - this is going to be complicated. I'll rip the series into 3 parts and repost.

let's try like this:

drivers/usb/otg and drivers/usb/phy which don't create dependencies for chipidea and other patches which create dependencies.

Then we can figure out how to handle the dependencies.

Signature · 8 lines
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/e6aafe85/attachment.sig>
#7 lore raw

PATCH v5 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Quoted 35 lines · Felipe Balbi
Quoted 27 lines · Marc Kleine-Budde
Quoted 26 lines · Felipe Balbi

Hi,

Quoted 22 lines · Marc Kleine-Budde
Quoted 8 lines · Felipe Balbi
Quoted 7 lines · Marc Kleine-Budde

In patch "5d3c28b usb: otg: add device tree support to otg library" devm_usb_get_phy_by_phandle() was added. It uses try_module_get() to lock the phy driver in memory. The corresponding module_put() is missing in that patch.

This patch adds try_module_get() to usb_get_phy() and usb_get_phy_dev(). Further the missing module_put() is added to usb_put_phy().

Quoted 6 lines
Quoted 4 lines

this one doesn't apply to my tree. What did you use as a base ?

As stated in the cover letter: Greg's usb-next.

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git

I'd really appreciate if this series goes into a single tree. So that other chipidea developers can base their work on this.

Quoted 6 lines
Quoted 3 lines

it eventually will all go through Greg's queue, but drivers/usb/phy and drivers/usb/otg/ needs to go through my tree so we avoid conflicts later, sorry.

Oh - this is going to be complicated. I'll rip the series into 3 parts and repost.

Quoted 7 lines

let's try like this:

drivers/usb/otg and drivers/usb/phy which don't create dependencies for chipidea and other patches which create dependencies.

Then we can figure out how to handle the dependencies.

That'll be these 3 branches then:

otg-for-v3.9 (bugfix for v3.9):
6bef020 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

otg-for-v3.10 (depends on otg-for-v3.9):
a0e17f5 USB: move bulk of otg/otg.c to phy/phy.c
a6fc0d1 USB: add devicetree helpers for determining dr_mode and phy_type 8a4c9f8 USB mxs-phy: Register phy with framework

chipidea-for-v3.10 (most patches depend on otg-for-v3.10):
15c930e USB chipidea: ci13xxx-imx: create dynamic platformdata 9466e85 USB chipidea: add PTW and PTS handling
ad2cc0d USB chipidea: introduce dual role mode pdata flags 8e7f1bb USB chipidea i.MX: introduce dr_mode property 5d83722 USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/9eec402d/attachment.sig>
#8 lore raw

PATCH 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Hi,

Quoted 54 lines · Marc Kleine-Budde
Quoted 35 lines · Felipe Balbi
Quoted 27 lines · Marc Kleine-Budde
Quoted 26 lines · Felipe Balbi

Hi,

Quoted 22 lines · Marc Kleine-Budde
Quoted 8 lines · Felipe Balbi
Quoted 7 lines · Marc Kleine-Budde

In patch "5d3c28b usb: otg: add device tree support to otg library" devm_usb_get_phy_by_phandle() was added. It uses try_module_get() to lock the phy driver in memory. The corresponding module_put() is missing in that patch.

This patch adds try_module_get() to usb_get_phy() and usb_get_phy_dev(). Further the missing module_put() is added to usb_put_phy().

Quoted 6 lines
Quoted 4 lines

this one doesn't apply to my tree. What did you use as a base ?

As stated in the cover letter: Greg's usb-next.

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git

I'd really appreciate if this series goes into a single tree. So that other chipidea developers can base their work on this.

Quoted 6 lines
Quoted 3 lines

it eventually will all go through Greg's queue, but drivers/usb/phy and drivers/usb/otg/ needs to go through my tree so we avoid conflicts later, sorry.

Oh - this is going to be complicated. I'll rip the series into 3 parts and repost.

Quoted 7 lines

let's try like this:

drivers/usb/otg and drivers/usb/phy which don't create dependencies for chipidea and other patches which create dependencies.

Then we can figure out how to handle the dependencies.

That'll be these 3 branches then:

otg-for-v3.9 (bugfix for v3.9):
6bef020 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

otg-for-v3.10 (depends on otg-for-v3.9):
a0e17f5 USB: move bulk of otg/otg.c to phy/phy.c
a6fc0d1 USB: add devicetree helpers for determining dr_mode and phy_type 8a4c9f8 USB mxs-phy: Register phy with framework

Quoted 6 lines

chipidea-for-v3.10 (most patches depend on otg-for-v3.10):
15c930e USB chipidea: ci13xxx-imx: create dynamic platformdata 9466e85 USB chipidea: add PTW and PTS handling
ad2cc0d USB chipidea: introduce dual role mode pdata flags 8e7f1bb USB chipidea i.MX: introduce dr_mode property 5d83722 USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy

sounds good to me, please make sure to always split your series like this. You can't expect me (or any maintainer for that matter) to pick patches to proper branches based on your commit logs alone.

remeber that every single maintainer needs to handle hundreds of emails a week (if not a day) and if patches are properly split and cleanly mention if it's a bugfix or not, things will go wrong.

Signature · 8 lines
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/f12178d2/attachment.sig>
#9 lore raw

PATCH v5 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Quoted 17 lines · Felipe Balbi
Quoted 10 lines

That'll be these 3 branches then:

otg-for-v3.9 (bugfix for v3.9):
6bef020 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

otg-for-v3.10 (depends on otg-for-v3.9):
a0e17f5 USB: move bulk of otg/otg.c to phy/phy.c
a6fc0d1 USB: add devicetree helpers for determining dr_mode and phy_type 8a4c9f8 USB mxs-phy: Register phy with framework

Quoted 6 lines

chipidea-for-v3.10 (most patches depend on otg-for-v3.10):
15c930e USB chipidea: ci13xxx-imx: create dynamic platformdata 9466e85 USB chipidea: add PTW and PTS handling
ad2cc0d USB chipidea: introduce dual role mode pdata flags 8e7f1bb USB chipidea i.MX: introduce dr_mode property 5d83722 USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy

Quoted 7 lines

sounds good to me, please make sure to always split your series like this. You can't expect me (or any maintainer for that matter) to pick patches to proper branches based on your commit logs alone.

remeber that every single maintainer needs to handle hundreds of emails a week (if not a day) and if patches are properly split and cleanly mention if it's a bugfix or not, things will go wrong.

That was just a proposal. You'll find these series in your inbox in a few minutes.

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/dfd974c4/attachment.sig>
#10 lore raw

PATCH v5 1/9 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

Quoted 22 lines · Marc Kleine-Budde
Quoted 21 lines · Felipe Balbi
Quoted 10 lines

That'll be these 3 branches then:

otg-for-v3.9 (bugfix for v3.9):
6bef020 USB otg: use try_module_get in all usb_get_phy functions and add missing module_put

otg-for-v3.10 (depends on otg-for-v3.9):
a0e17f5 USB: move bulk of otg/otg.c to phy/phy.c
a6fc0d1 USB: add devicetree helpers for determining dr_mode and phy_type 8a4c9f8 USB mxs-phy: Register phy with framework

Quoted 6 lines

chipidea-for-v3.10 (most patches depend on otg-for-v3.10):
15c930e USB chipidea: ci13xxx-imx: create dynamic platformdata 9466e85 USB chipidea: add PTW and PTS handling
ad2cc0d USB chipidea: introduce dual role mode pdata flags 8e7f1bb USB chipidea i.MX: introduce dr_mode property 5d83722 USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy

sounds good to me, please make sure to always split your series like this. You can't expect me (or any maintainer for that matter) to pick patches to proper branches based on your commit logs alone.

Quoted 6 lines
Quoted 3 lines

remeber that every single maintainer needs to handle hundreds of emails a week (if not a day) and if patches are properly split and cleanly mention if it's a bugfix or not, things will go wrong.

That was just a proposal. You'll find these series in your inbox in a few minutes.

Done.

regards,
Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/e128f81e/attachment.sig>
#11 lore raw

PATCH v5 2/9 USB: move bulk of otg/otg.c to phy/phy.c

In reply to Marc Kleine-Budde

From: Sascha Hauer <[email protected]>

Most of otg/otg.c is not otg specific, but phy specific, so move it to the phy directory.

---
 drivers/usb/otg/otg.c    |  427 --------------------------------------------
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/phy.c    |  438 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 439 insertions(+), 427 deletions(-)
 create mode 100644 drivers/usb/phy/phy.c
drivers/usb/otg/otg.c +0 -427
index 2bd03d2..358cfd9 100644
@@ -8,436 +8,9 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
-#include <linux/kernel.h>
 #include <linux/export.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-
 #include <linux/usb/otg.h>
 
-static LIST_HEAD(phy_list);
-static LIST_HEAD(phy_bind_list);
-static DEFINE_SPINLOCK(phy_lock);
-
-static struct usb_phy *__usb_find_phy(struct list_head *list,
-	enum usb_phy_type type)
-{
-	struct usb_phy  *phy = NULL;
-
-	list_for_each_entry(phy, list, head) {
-		if (phy->type != type)
-			continue;
-
-		return phy;
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__usb_find_phy_dev(struct device *dev,
-	struct list_head *list, u8 index)
-{
-	struct usb_phy_bind *phy_bind = NULL;
-
-	list_for_each_entry(phy_bind, list, list) {
-		if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
-				phy_bind->index == index) {
-			if (phy_bind->phy)
-				return phy_bind->phy;
-			else
-				return ERR_PTR(-EPROBE_DEFER);
-		}
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__of_usb_find_phy(struct device_node *node)
-{
-	struct usb_phy  *phy;
-
-	list_for_each_entry(phy, &phy_list, head) {
-		if (node != phy->dev->of_node)
-			continue;
-
-		return phy;
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static void devm_usb_phy_release(struct device *dev, void *res)
-{
-	struct usb_phy *phy = *(struct usb_phy **)res;
-
-	usb_put_phy(phy);
-}
-
-static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
-{
-	return res == match_data;
-}
-
-/**
- * devm_usb_get_phy - find the USB PHY
- * @dev - device that requests this phy
- * @type - the type of the phy the controller requires
- *
- * Gets the phy using usb_get_phy(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
-{
-	struct usb_phy **ptr, *phy;
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return NULL;
-
-	phy = usb_get_phy(type);
-	if (!IS_ERR(phy)) {
-		*ptr = phy;
-		devres_add(dev, ptr);
-	} else
-		devres_free(ptr);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy);
-
-/**
- * usb_get_phy - find the USB PHY
- * @type - the type of the phy the controller requires
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy.  The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy(enum usb_phy_type type)
-{
-	struct usb_phy	*phy = NULL;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __usb_find_phy(&phy_list, type);
-	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
-		pr_err("unable to find transceiver of type %s\n",
-			usb_phy_type_string(type));
-		goto err0;
-	}
-
-	get_device(phy->dev);
-
-err0:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return phy;
-}
-EXPORT_SYMBOL(usb_get_phy);
-
- /**
- * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
- * @dev - device that requests this phy
- * @phandle - name of the property holding the phy phandle value
- * @index - the index of the phy
- *
- * Returns the phy driver associated with the given phandle value,
- * after getting a refcount to it, -ENODEV if there is no such phy or
- * -EPROBE_DEFER if there is a phandle to the phy, but the device is
- * not yet loaded. While at that, it also associates the device with
- * the phy using devres. On driver detach, release function is invoked
- * on the devres data, then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
-	const char *phandle, u8 index)
-{
-	struct usb_phy	*phy = ERR_PTR(-ENOMEM), **ptr;
-	unsigned long	flags;
-	struct device_node *node;
-
-	if (!dev->of_node) {
-		dev_dbg(dev, "device does not have a device node entry\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	node = of_parse_phandle(dev->of_node, phandle, index);
-	if (!node) {
-		dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
-			dev->of_node->full_name);
-		return ERR_PTR(-ENODEV);
-	}
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr) {
-		dev_dbg(dev, "failed to allocate memory for devres\n");
-		goto err0;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __of_usb_find_phy(node);
-	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
-		phy = ERR_PTR(-EPROBE_DEFER);
-		devres_free(ptr);
-		goto err1;
-	}
-
-	*ptr = phy;
-	devres_add(dev, ptr);
-
-	get_device(phy->dev);
-
-err1:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-err0:
-	of_node_put(node);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
-
-/**
- * usb_get_phy_dev - find the USB PHY
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy.  The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
-{
-	struct usb_phy	*phy = NULL;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
-	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
-		pr_err("unable to find transceiver\n");
-		goto err0;
-	}
-
-	get_device(phy->dev);
-
-err0:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return phy;
-}
-EXPORT_SYMBOL(usb_get_phy_dev);
-
-/**
- * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Gets the phy using usb_get_phy_dev(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
-{
-	struct usb_phy **ptr, *phy;
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return NULL;
-
-	phy = usb_get_phy_dev(dev, index);
-	if (!IS_ERR(phy)) {
-		*ptr = phy;
-		devres_add(dev, ptr);
-	} else
-		devres_free(ptr);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_dev);
-
-/**
- * devm_usb_put_phy - release the USB PHY
- * @dev - device that wants to release this phy
- * @phy - the phy returned by devm_usb_get_phy()
- *
- * destroys the devres associated with this phy and invokes usb_put_phy
- * to release the phy.
- *
- * For use by USB host and peripheral drivers.
- */
-void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
-{
-	int r;
-
-	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
-	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
-}
-EXPORT_SYMBOL(devm_usb_put_phy);
-
-/**
- * usb_put_phy - release the USB PHY
- * @x: the phy returned by usb_get_phy()
- *
- * Releases a refcount the caller received from usb_get_phy().
- *
- * For use by USB host and peripheral drivers.
- */
-void usb_put_phy(struct usb_phy *x)
-{
-	if (x) {
-		struct module *owner = x->dev->driver->owner;
-
-		put_device(x->dev);
-		module_put(owner);
-	}
-}
-EXPORT_SYMBOL(usb_put_phy);
-
-/**
- * usb_add_phy - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- * @type - the type of this PHY
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
-{
-	int		ret = 0;
-	unsigned long	flags;
-	struct usb_phy	*phy;
-
-	if (x->type != USB_PHY_TYPE_UNDEFINED) {
-		dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	list_for_each_entry(phy, &phy_list, head) {
-		if (phy->type == type) {
-			ret = -EBUSY;
-			dev_err(x->dev, "transceiver type %s already exists\n",
-						usb_phy_type_string(type));
-			goto out;
-		}
-	}
-
-	x->type = type;
-	list_add_tail(&x->head, &phy_list);
-
-out:
-	spin_unlock_irqrestore(&phy_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(usb_add_phy);
-
-/**
- * usb_add_phy_dev - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy_dev(struct usb_phy *x)
-{
-	struct usb_phy_bind *phy_bind;
-	unsigned long flags;
-
-	if (!x->dev) {
-		dev_err(x->dev, "no device provided for PHY\n");
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-	list_for_each_entry(phy_bind, &phy_bind_list, list)
-		if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
-			phy_bind->phy = x;
-
-	list_add_tail(&x->head, &phy_list);
-
-	spin_unlock_irqrestore(&phy_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(usb_add_phy_dev);
-
-/**
- * usb_remove_phy - remove the OTG PHY
- * @x: the USB OTG PHY to be removed;
- *
- * This reverts the effects of usb_add_phy
- */
-void usb_remove_phy(struct usb_phy *x)
-{
-	unsigned long	flags;
-	struct usb_phy_bind *phy_bind;
-
-	spin_lock_irqsave(&phy_lock, flags);
-	if (x) {
-		list_for_each_entry(phy_bind, &phy_bind_list, list)
-			if (phy_bind->phy == x)
-				phy_bind->phy = NULL;
-		list_del(&x->head);
-	}
-	spin_unlock_irqrestore(&phy_lock, flags);
-}
-EXPORT_SYMBOL(usb_remove_phy);
-
-/**
- * usb_bind_phy - bind the phy and the controller that uses the phy
- * @dev_name: the device name of the device that will bind to the phy
- * @index: index to specify the port number
- * @phy_dev_name: the device name of the phy
- *
- * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
- * be used when the phy driver registers the phy and when the controller
- * requests this phy.
- *
- * To be used by platform specific initialization code.
- */
-int __init usb_bind_phy(const char *dev_name, u8 index,
-				const char *phy_dev_name)
-{
-	struct usb_phy_bind *phy_bind;
-	unsigned long flags;
-
-	phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
-	if (!phy_bind) {
-		pr_err("phy_bind(): No memory for phy_bind");
-		return -ENOMEM;
-	}
-
-	phy_bind->dev_name = dev_name;
-	phy_bind->phy_dev_name = phy_dev_name;
-	phy_bind->index = index;
-
-	spin_lock_irqsave(&phy_lock, flags);
-	list_add_tail(&phy_bind->list, &phy_bind_list);
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usb_bind_phy);
-
 const char *otg_state_string(enum usb_otg_state state)
 {
 	switch (state) {
drivers/usb/phy/Makefile +1 -0
index b13faa1..9fa6327 100644
@@ -4,6 +4,7 @@
 
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
+obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
drivers/usb/phy/phy.c new file +438 -0

438 lines not on this page · raw message

Signature · 1 line
1.7.10.4
#12 lore raw

PATCH v5 2/9 USB: move bulk of otg/otg.c to phy/phy.c

Quoted 9 lines · Marc Kleine-Budde

From: Sascha Hauer <[email protected]>

Most of otg/otg.c is not otg specific, but phy specific, so move it to the phy directory.

Felipe, can you please review this patch and give us your Acked-by?

regards, Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/03bd19d0/attachment.sig>
#13 lore raw

PATCH 2/9 USB: move bulk of otg/otg.c to phy/phy.c

Quoted 6 lines · Marc Kleine-Budde
Quoted 5 lines · Marc Kleine-Budde

From: Sascha Hauer <[email protected]>

Most of otg/otg.c is not otg specific, but phy specific, so move it to the phy directory.

Quoted 6 lines
Quoted 4 lines

Felipe, can you please review this patch and give us your Acked-by?

I will take it through my tree

Signature · 8 lines
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/3b5f3d2e/attachment.sig>
#14 lore raw

PATCH v5 3/9 USB: add devicetree helpers for determining dr_mode and phy_type

In reply to Marc Kleine-Budde

From: Michael Grzeschik <[email protected]>

This adds two little devicetree helper functions for determining the dr_mode (host, peripheral, otg, dual-role) and phy_type (utmi, ulpi,...) from the devicetree.

---
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/of.c     |   47 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/usb-common.c |   37 ++++++++++++++++++++++++++++++++++++
 include/linux/usb/of.h   |   27 ++++++++++++++++++++++++++
 include/linux/usb/otg.h  |    8 ++++++++
 include/linux/usb/phy.h  |    9 +++++++++
 6 files changed, 129 insertions(+)
 create mode 100644 drivers/usb/phy/of.c
 create mode 100644 include/linux/usb/of.h
drivers/usb/phy/Makefile +1 -0
index 9fa6327..e1be1e8 100644
@@ -5,6 +5,7 @@
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
+obj-$(CONFIG_OF)			+= of.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
drivers/usb/phy/of.c new file +47 -0

47 lines not on this page · raw message

drivers/usb/usb-common.c +37 -0
index d29503e..18b994b 100644
@@ -14,6 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
 
 const char *usb_speed_string(enum usb_device_speed speed)
 {
@@ -32,4 +35,38 @@ const char *usb_speed_string(enum usb_device_speed speed)
 }
 EXPORT_SYMBOL_GPL(usb_speed_string);
 
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+	[USB_DR_MODE_DUAL_ROLE]		= "dual-role",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	const char *dr_mode;
+	int err, i;
+
+	err = of_property_read_string(np, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+		if (!strcmp(dr_mode, usb_dr_modes[i]))
+			return i;
+
+	return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
 MODULE_LICENSE("GPL");
include/linux/usb/of.h new file +27 -0
new file mode 100644
index 0000000..4681a20
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
include/linux/usb/otg.h +8 -0
index e8a5fe8..6d90dff 100644
@@ -99,4 +99,12 @@ otg_start_srp(struct usb_otg *otg)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+enum usb_dr_mode {
+	USB_DR_MODE_UNKNOWN,
+	USB_DR_MODE_HOST,
+	USB_DR_MODE_PERIPHERAL,
+	USB_DR_MODE_OTG,
+	USB_DR_MODE_DUAL_ROLE,
+};
+
 #endif /* __LINUX_USB_OTG_H */
include/linux/usb/phy.h +9 -0
index 15847cb..5edddb1 100644
@@ -12,6 +12,15 @@
 #include <linux/notifier.h>
 #include <linux/usb.h>
 
+enum usb_phy_interface {
+	USBPHY_INTERFACE_MODE_UNKNOWN,
+	USBPHY_INTERFACE_MODE_UTMI,
+	USBPHY_INTERFACE_MODE_UTMIW,
+	USBPHY_INTERFACE_MODE_ULPI,
+	USBPHY_INTERFACE_MODE_SERIAL,
+	USBPHY_INTERFACE_MODE_HSIC,
+};
+
 enum usb_phy_events {
 	USB_EVENT_NONE,         /* no events or cable disconnected */
 	USB_EVENT_VBUS,         /* vbus valid event */
Signature · 1 line
1.7.10.4
#15 lore raw

PATCH v5 3/9 USB: add devicetree helpers for determining dr_mode and phy_type

Quoted 10 lines · Marc Kleine-Budde

From: Michael Grzeschik <[email protected]>

This adds two little devicetree helper functions for determining the dr_mode (host, peripheral, otg, dual-role) and phy_type (utmi, ulpi,...) from the devicetree.

Felipe, same here. Your Acked-by is appreciated.

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/4c678f52/attachment.sig>
#16 lore raw

PATCH 3/9 USB: add devicetree helpers for determining dr_mode and phy_type

Quoted 7 lines · Marc Kleine-Budde
Quoted 6 lines · Marc Kleine-Budde

From: Michael Grzeschik <[email protected]>

This adds two little devicetree helper functions for determining the dr_mode (host, peripheral, otg, dual-role) and phy_type (utmi, ulpi,...) from the devicetree.

Quoted 6 lines
Quoted 4 lines

Felipe, same here. Your Acked-by is appreciated.

likewise, I'll take it through my tree

Signature · 8 lines
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/dd25267d/attachment.sig>
#17 lore raw

PATCH 3/9 USB: add devicetree helpers for determining dr_mode and phy_type

In reply to Marc Kleine-Budde
Quoted 3 lines · Marc Kleine-Budde

From: Michael Grzeschik <[email protected]>

This adds two little devicetree helper functions for determining the dr_mode

it looks to me that "mode" is enough. s/dr_mode/mode/

Signature · 8 lines
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/ba484b41/attachment.sig>
#18 lore raw

PATCH v5 3/9 USB: add devicetree helpers for determining dr_mode and phy_type

Quoted 6 lines · Felipe Balbi
Quoted 3 lines · Marc Kleine-Budde

From: Michael Grzeschik <[email protected]>

This adds two little devicetree helper functions for determining the dr_mode

it looks to me that "mode" is enough. s/dr_mode/mode/

There already is that DT binding, we just created a helper function for that.

git grep -e dr_mode\ *: linus/master Documentation/ linus/master:Documentation/devicetree/bindings/usb/fsl-usb.txt: - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible linus/master:Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt: - dr_mode : dual role mode. Indicates the working mode for

Marc

Signature · 12 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/37d8315b/attachment.sig>
#19 lore raw

PATCH 3/9 USB: add devicetree helpers for determining dr_mode and phy_type

Quoted 6 lines · Marc Kleine-Budde
Quoted 5 lines · Felipe Balbi
Quoted 3 lines · Marc Kleine-Budde

From: Michael Grzeschik <[email protected]>

This adds two little devicetree helper functions for determining the dr_mode

Quoted 8 lines
Quoted 1 line

it looks to me that "mode" is enough. s/dr_mode/mode/

There already is that DT binding, we just created a helper function for that.

git grep -e dr_mode\ *: linus/master Documentation/ linus/master:Documentation/devicetree/bindings/usb/fsl-usb.txt: - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible linus/master:Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt: - dr_mode : dual role mode. Indicates the working mode for

fair enough, then there's nothing we can do :-p

I'll take it soonish.

Signature · 8 lines
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130227/aa8cd7cc/attachment-0001.sig>
#20 lore raw

PATCH v5 4/9 USB chipidea: ci13xxx-imx: create dynamic platformdata

In reply to Marc Kleine-Budde

From: Michael Grzeschik <[email protected]>

This patch removes the limitation of having only one instance of the ci13xxx-imx platformdata and makes different configurations possible.

---
 drivers/usb/chipidea/ci13xxx_imx.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)
drivers/usb/chipidea/ci13xxx_imx.c +15 -10
index 8c29122..69024e0 100644
@@ -85,17 +85,10 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
 
 /* End of common functions shared by usbmisc drivers*/
 
-static struct ci13xxx_platform_data ci13xxx_imx_platdata  = {
-	.name			= "ci13xxx_imx",
-	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
-				  CI13XXX_PULLUP_ON_VBUS |
-				  CI13XXX_DISABLE_STREAMING,
-	.capoffset		= DEF_CAPOFFSET,
-};
-
 static int ci13xxx_imx_probe(struct platform_device *pdev)
 {
 	struct ci13xxx_imx_data *data;
+	struct ci13xxx_platform_data *pdata;
 	struct platform_device *plat_ci, *phy_pdev;
 	struct device_node *phy_np;
 	struct resource *res;
@@ -107,6 +100,18 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		&& !usbmisc_ops)
 		return -EPROBE_DEFER;
 
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX pdata!\n");
+		return -ENOMEM;
+	}
+
+	pdata->name = "ci13xxx_imx";
+	pdata->capoffset = DEF_CAPOFFSET;
+	pdata->flags = CI13XXX_REQUIRE_TRANSCEIVER |
+		       CI13XXX_PULLUP_ON_VBUS |
+		       CI13XXX_DISABLE_STREAMING;
+
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
@@ -168,7 +173,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		reg_vbus = NULL;
 	}
 
-	ci13xxx_imx_platdata.phy = data->phy;
+	pdata->phy = data->phy;
 
 	if (!pdev->dev.dma_mask) {
 		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
@@ -193,7 +198,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 
 	plat_ci = ci13xxx_add_device(&pdev->dev,
 				pdev->resource, pdev->num_resources,
-				&ci13xxx_imx_platdata);
+				pdata);
 	if (IS_ERR(plat_ci)) {
 		ret = PTR_ERR(plat_ci);
 		dev_err(&pdev->dev,
Signature · 1 line
1.7.10.4
#21 lore raw

PATCH v5 5/9 USB chipidea: add PTW and PTS handling

In reply to Marc Kleine-Budde

From: Michael Grzeschik <[email protected]>

This patch makes it possible to configure the PTW and PTS bits inside the portsc register for host and device mode before the driver starts and the phy can be addressed as hardware implementation is designed.

---
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    5 +++
 drivers/usb/chipidea/bits.h                        |   14 ++++++-
 drivers/usb/chipidea/ci13xxx_imx.c                 |    3 ++
 drivers/usb/chipidea/core.c                        |   39 ++++++++++++++++++++
 include/linux/usb/chipidea.h                       |    1 +
 5 files changed, 61 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +5 -0
index 5778b9c..dd42ccd 100644
@@ -5,6 +5,11 @@ Required properties:
 - reg: Should contain registers location and length
 - interrupts: Should contain controller interrupt
 
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched
+
 Optional properties:
 - fsl,usbphy: phandler of usb phy that connects to the only one port
 - fsl,usbmisc: phandler of non-core register device, with one argument
drivers/usb/chipidea/bits.h +13 -1
index 050de85..d8ffc2f 100644
@@ -48,10 +48,22 @@
 #define PORTSC_SUSP           BIT(7)
 #define PORTSC_HSP            BIT(9)
 #define PORTSC_PTC            (0x0FUL << 16)
+/* PTS and PTW for non lpm version only */
+#define PORTSC_PTS(d)         ((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
+#define PORTSC_PTW            BIT(28)
 
 /* DEVLC */
 #define DEVLC_PSPD            (0x03UL << 25)
-#define    DEVLC_PSPD_HS      (0x02UL << 25)
+#define DEVLC_PSPD_HS         (0x02UL << 25)
+#define DEVLC_PTW             BIT(27)
+#define DEVLC_STS             BIT(28)
+#define DEVLC_PTS(d)          (((d) & 0x7) << 29)
+
+/* Encoding for DEVLC_PTS and PORTSC_PTS */
+#define PTS_UTMI              0
+#define PTS_ULPI              2
+#define PTS_SERIAL            3
+#define PTS_HSIC              4
 
 /* OTGSC */
 #define OTGSC_IDPU	      BIT(5)
drivers/usb/chipidea/ci13xxx_imx.c +3 -0
index 69024e0..ebc1148 100644
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/usb/of.h>
 
 #include "ci.h"
 #include "ci13xxx_imx.h"
@@ -112,6 +113,8 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		       CI13XXX_PULLUP_ON_VBUS |
 		       CI13XXX_DISABLE_STREAMING;
 
+	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
+
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
drivers/usb/chipidea/core.c +39 -0
index 57cae1f..04d68cb 100644
@@ -67,6 +67,8 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
+#include <linux/phy.h>
 
 #include "ci.h"
 #include "udc.h"
@@ -211,6 +213,41 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
 	return 0;
 }
 
+static void hw_phymode_configure(struct ci13xxx *ci)
+{
+	u32 portsc, lpm;
+
+	switch (ci->platdata->phy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		portsc = PORTSC_PTS(PTS_UTMI);
+		lpm = DEVLC_PTS(PTS_UTMI);
+		break;
+	case USBPHY_INTERFACE_MODE_UTMIW:
+		portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
+		lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
+		break;
+	case USBPHY_INTERFACE_MODE_ULPI:
+		portsc = PORTSC_PTS(PTS_ULPI);
+		lpm = DEVLC_PTS(PTS_ULPI);
+		break;
+	case USBPHY_INTERFACE_MODE_SERIAL:
+		portsc = PORTSC_PTS(PTS_SERIAL);
+		lpm = DEVLC_PTS(PTS_SERIAL);
+		break;
+	case USBPHY_INTERFACE_MODE_HSIC:
+		portsc = PORTSC_PTS(PTS_HSIC);
+		lpm = DEVLC_PTS(PTS_HSIC);
+		break;
+	default:
+		return;
+	}
+
+	if (ci->hw_bank.lpm)
+		hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
+	else
+		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
+}
+
 /**
  * hw_device_reset: resets chip (execute without interruption)
  * @ci: the controller
@@ -476,6 +513,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 			: CI_ROLE_GADGET;
 	}
 
+	hw_phymode_configure(ci);
+
 	ret = ci_role_start(ci, ci->role);
 	if (ret) {
 		dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
include/linux/usb/chipidea.h +1 -0
index 544825d..1a2aa18 100644
@@ -14,6 +14,7 @@ struct ci13xxx_platform_data {
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
 	struct usb_phy	*phy;
+	enum usb_phy_interface phy_mode;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
Signature · 1 line
1.7.10.4
#22 lore raw

PATCH v5 6/9 USB chipidea: introduce dual role mode pdata flags

In reply to Marc Kleine-Budde

From: Sascha Hauer <[email protected]>

Even if a chipidea core is otg capable the board may not. This allows to explicitly set the core to host/peripheral mode. Without these flags the driver falls back to the old behaviour.

---
 drivers/usb/chipidea/core.c  |   22 ++++++++++++++++------
 include/linux/usb/chipidea.h |    2 +-
 2 files changed, 17 insertions(+), 7 deletions(-)
drivers/usb/chipidea/core.c +16 -6
index 04d68cb..ec27060 100644
@@ -435,6 +435,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	struct resource	*res;
 	void __iomem	*base;
 	int		ret;
+	enum usb_dr_mode dr_mode;
 
 	if (!dev->platform_data) {
 		dev_err(dev, "platform data missing\n");
@@ -487,14 +488,23 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	/* For now we treat dual-role as otg */
+	dr_mode = ci->platdata->dr_mode;
+	if (dr_mode == USB_DR_MODE_UNKNOWN || dr_mode == USB_DR_MODE_DUAL_ROLE)
+		dr_mode = USB_DR_MODE_OTG;
+
 	/* initialize role(s) before the interrupt is requested */
-	ret = ci_hdrc_host_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support host\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+		ret = ci_hdrc_host_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support host\n");
+	}
 
-	ret = ci_hdrc_gadget_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support gadget\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+		ret = ci_hdrc_gadget_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support gadget\n");
+	}
 
 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
 		dev_err(dev, "no supported roles\n");
include/linux/usb/chipidea.h +1 -1
index 1a2aa18..b314647 100644
@@ -20,7 +20,7 @@ struct ci13xxx_platform_data {
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
 #define CI13XXX_PULLUP_ON_VBUS		BIT(2)
 #define CI13XXX_DISABLE_STREAMING	BIT(3)
-
+	enum usb_dr_mode	dr_mode;
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
 	void	(*notify_event) (struct ci13xxx *ci, unsigned event);
Signature · 1 line
1.7.10.4
#23 lore raw

PATCH v5 7/9 USB chipidea i.MX: introduce dr_mode property

In reply to Marc Kleine-Budde

From: Sascha Hauer <[email protected]>

The dr_mode devicetree property allows to explicitly specify the host/peripheral/otg mode. This is necessary for boards without proper ID pin handling.

---
 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt |    1 +
 drivers/usb/chipidea/ci13xxx_imx.c                    |    1 +
 2 files changed, 2 insertions(+)
Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +1 -0
index dd42ccd..493a414 100644
@@ -9,6 +9,7 @@ Recommended properies:
 - phy_type: the type of the phy connected to the core. Should be one
   of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
   property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
 
 Optional properties:
 - fsl,usbphy: phandler of usb phy that connects to the only one port
drivers/usb/chipidea/ci13xxx_imx.c +1 -0
index ebc1148..b598bb8 100644
@@ -114,6 +114,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		       CI13XXX_DISABLE_STREAMING;
 
 	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
+	pdata->dr_mode = of_usb_get_dr_mode(pdev->dev.of_node);
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
Signature · 1 line
1.7.10.4
#24 lore raw

PATCH v5 8/9 USB mxs-phy: Register phy with framework

In reply to Marc Kleine-Budde

From: Sascha Hauer <[email protected]>

We now have usb_add_phy_dev(), so use it to register with the framework to be able to find the phy from the USB driver.

---
 drivers/usb/otg/mxs-phy.c |    9 +++++++++
 1 file changed, 9 insertions(+)
drivers/usb/otg/mxs-phy.c +9 -0
index b0d9f11..aa40325 100644
@@ -127,6 +127,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	void __iomem *base;
 	struct clk *clk;
 	struct mxs_phy *mxs_phy;
+	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -166,11 +167,19 @@ static int mxs_phy_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, &mxs_phy->phy);
 
+	ret = usb_add_phy_dev(&mxs_phy->phy);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
 static int mxs_phy_remove(struct platform_device *pdev)
 {
+	struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&mxs_phy->phy);
+
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
Signature · 1 line
1.7.10.4
#25 lore raw

PATCH v5 9/9 USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy

In reply to Marc Kleine-Budde

From: Sascha Hauer <[email protected]>

This patch replaces the hand crafted code to retrieve the phy's phandle from the DT by the helper function devm_usb_get_phy_by_phandle() which has been added in commit:

"5d3c28b usb: otg: add device tree support to otg library"

---
 drivers/usb/chipidea/ci13xxx_imx.c |   38 ++++++++++++++++--------------------
 1 file changed, 17 insertions(+), 21 deletions(-)
drivers/usb/chipidea/ci13xxx_imx.c +17 -21
index b598bb8..6e720ce 100644
@@ -30,7 +30,6 @@
 	((struct usb_phy *)platform_get_drvdata(pdev))
 
 struct ci13xxx_imx_data {
-	struct device_node *phy_np;
 	struct usb_phy *phy;
 	struct platform_device *ci_pdev;
 	struct clk *clk;
@@ -90,12 +89,12 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 {
 	struct ci13xxx_imx_data *data;
 	struct ci13xxx_platform_data *pdata;
-	struct platform_device *plat_ci, *phy_pdev;
-	struct device_node *phy_np;
+	struct platform_device *plat_ci;
 	struct resource *res;
 	struct regulator *reg_vbus;
 	struct pinctrl *pinctrl;
 	int ret;
+	struct usb_phy *phy;
 
 	if (of_find_property(pdev->dev.of_node, "fsl,usbmisc", NULL)
 		&& !usbmisc_ops)
@@ -147,19 +146,20 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0);
-	if (phy_np) {
-		data->phy_np = phy_np;
-		phy_pdev = of_find_device_by_node(phy_np);
-		if (phy_pdev) {
-			struct usb_phy *phy;
-			phy = pdev_to_phy(phy_pdev);
-			if (phy &&
-			    try_module_get(phy_pdev->dev.driver->owner)) {
-				usb_phy_init(phy);
-				data->phy = phy;
-			}
+	phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
+	if (PTR_ERR(phy) == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto err_clk;
+	}
+
+	if (!IS_ERR(phy)) {
+		ret = usb_phy_init(phy);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to init phy: %d\n", ret);
+			goto err_clk;
 		}
+
+		data->phy = phy;
 	}
 
 	/* we only support host now, so enable vbus here */
@@ -170,7 +170,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"Failed to enable vbus regulator, err=%d\n",
 				ret);
-			goto put_np;
+			goto err_clk;
 		}
 		data->reg_vbus = reg_vbus;
 	} else {
@@ -222,9 +222,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 err:
 	if (reg_vbus)
 		regulator_disable(reg_vbus);
-put_np:
-	if (phy_np)
-		of_node_put(phy_np);
+err_clk:
 	clk_disable_unprepare(data->clk);
 	return ret;
 }
@@ -244,8 +242,6 @@ static int ci13xxx_imx_remove(struct platform_device *pdev)
 		module_put(data->phy->dev->driver->owner);
 	}
 
-	of_node_put(data->phy_np);
-
 	clk_disable_unprepare(data->clk);
 
 	platform_set_drvdata(pdev, NULL);
Signature · 1 line
1.7.10.4