i2c: s3c24xx: allow device core to setup default pin configuration
Subsystems (2)
PATCH 1/1 i2c: s3c24xx: allow device core to setup default pin configuration
With device core now able to setup the default pin configuration, the call to devm_pinctrl_get_select_default can be removed. And the pin configuration code based on the deprecated Samsung specific gpio bindings is also removed.
---
Hi Heiko, Tomasz,
We have to make a choice on the path forward for pinctrl support on Samsung platforms. We have three cases to deal with.
A. Samsung platforms without DT support.
B. Samsung platforms with DT support using old Samsung specific
gpio bindings for pin-configuration (s3c24xx and s3x64xx).
C. Samsung platforms with DT support using using pinctrl based
pin-configurations (Exynos4 and Exynos5).
For [A], we just let the platform specific callbacks handle the pin setup. For [B] and [C], based on Linus Walleij's pin grab by device core patch and subsequent discussions with him on the mailing list, would it be acceptable that we discontinue support for [B] in Samsung SoC device drivers. This will impact your current DT work on s3c24xx and s3c64xx platforms. Pinctrl is inevitable and we have to migrate to it. Instead of workarounds to maintain support for [B], it might be better that we migrate s3c24xx and s3c64xx platforms to pinctrl.
Please do let us know your opinion on this.
Thanks,
Thomas.
drivers/i2c/busses/i2c-s3c2410.c | 67 +------------------------------------- 1 files changed, 1 insertions(+), 66 deletions(-)
drivers/i2c/busses/i2c-s3c2410.c +1 -66
@@ -37,8 +37,6 @@#include <linux/slab.h> #include <linux/io.h> #include <linux/of_i2c.h> -#include <linux/of_gpio.h> -#include <linux/pinctrl/consumer.h> #include <asm/irq.h>
@@ -84,8 +82,6 @@ struct s3c24xx_i2c {struct i2c_adapter adap;struct s3c2410_platform_i2c *pdata; -int gpios[2 ]; -struct pinctrl *pctrl;#ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition;#endif
@@ -856,57 +852,6 @@ static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) }#endif -#ifdef CONFIG_OF -static int s3c24xx_i2c_parse_dt_gpio (struct s3c24xx_i2c *i2c) -{ -int idx, gpio, ret; - -if (i2c->quirks &QUIRK_NO_GPIO ) -return 0 ; - -for (idx =0 ; idx <2 ; idx++) { - gpio =of_get_gpio (i2c->dev->of_node, idx); -if (!gpio_is_valid (gpio)) { -dev_err (i2c->dev,"invalid gpio[%d]: %d\n" , idx, gpio); - goto free_gpio; - } - i2c->gpios[idx] = gpio; - - ret =gpio_request (gpio,"i2c-bus" ); -if (ret) { -dev_err (i2c->dev,"gpio [%d] request failed\n" , gpio); - goto free_gpio; - } - } -return 0 ; - -free_gpio: -while (--idx >=0 ) -gpio_free (i2c->gpios[idx]); -return -EINVAL ; -} - -static void s3c24xx_i2c_dt_gpio_free (struct s3c24xx_i2c *i2c) -{ -unsigned int idx; - -if (i2c->quirks &QUIRK_NO_GPIO ) -return ; - -for (idx =0 ; idx <2 ; idx++) -gpio_free (i2c->gpios[idx]); -} -#else -static int s3c24xx_i2c_parse_dt_gpio (struct s3c24xx_i2c *i2c) -{ -return 0 ; -} - -static void s3c24xx_i2c_dt_gpio_free (struct s3c24xx_i2c *i2c) -{ -} -#endif -/* s3c24xx_i2c_init * * initialise the controller, set the IO lines and frequency
@@ -1054,15 +999,9 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &pdev->dev; - i2c->pctrl =devm_pinctrl_get_select_default (i2c->dev); -/* inititalise the i2c gpio lines */ - -if (i2c->pdata->cfg_gpio) { +if (i2c->pdata->cfg_gpio) i2c->pdata->cfg_gpio (to_platform_device (i2c->dev)); - }else if (IS_ERR (i2c->pctrl) &&s3c24xx_i2c_parse_dt_gpio (i2c)) { -return -EINVAL ; - }/* initialise the i2c controller */
@@ -1140,10 +1079,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)i2c_del_adapter (&i2c->adap);clk_disable_unprepare (i2c->clk); - -if (pdev->dev.of_node &&IS_ERR (i2c->pctrl)) -s3c24xx_i2c_dt_gpio_free (i2c); -return 0 ; }
Signature · 1 line
1.6.6.rc2
PATCH 1/1 i2c: s3c24xx: allow device core to setup default pin configuration
Hi Thomas,
Am Montag, 4. M?rz 2013, 14:42:53 schrieb Thomas Abraham:
Quoted 29 lines
With device core now able to setup the default pin configuration, the call to
devm_pinctrl_get_select_defaultcan be removed. And the pin configuration code based on the deprecated Samsung specific gpio bindings is also removed.Signed-off-by Thomas Abraham <[email protected]>---
Hi Heiko, Tomasz,
We have to make a choice on the path forward for pinctrl support on Samsung platforms. We have three cases to deal with.
A. Samsung platforms without DT support.
B. Samsung platforms with DT support using old Samsung specific
gpio bindings for pin-configuration (s3c24xx and s3x64xx).
C. Samsung platforms with DT support using using pinctrl based
pin-configurations (Exynos4 and Exynos5).For [A], we just let the platform specific callbacks handle the pin setup. For [B] and [C], based on Linus Walleij's pin grab by device core patch and subsequent discussions with him on the mailing list, would it be acceptable that we discontinue support for [B] in Samsung SoC device drivers. This will impact your current DT work on s3c24xx and s3c64xx platforms. Pinctrl is inevitable and we have to migrate to it. Instead of workarounds to maintain support for [B], it might be better that we migrate s3c24xx and s3c64xx platforms to pinctrl.
Quoted 1 line
Please do let us know your opinion on this.
As discusses in the other thread, I'm in favor of going forward this way and not to invest unnecessary energy in keeping the non-pinctrl stuff alive.
Pinctrl for at least the s3c2416 [0] is already on my playground-wishlist, but I'm still in the process of getting to know it.
So for this patch:
Heiko
[0] in contrast to what the gpio-samsung driver implies, the s3c24xx pin banks are not uniform between SoCs, making this more difficult still :-)
Quoted 111 lines
drivers/i2c/busses/i2c-s3c2410.c | 67+------------------------------------- 1 files changed, 1 insertions(+), 66 deletions(-)
(quoted diff) +0
-0
b/drivers/i2c/busses/i2c-s3c2410.cindex f6b880b..703272c 100644drivers/i2c/busses/i2c-s3c2410.c +1
-66@@ -37,8 +37,6 @@#include <linux/slab.h> #include <linux/io.h> #include <linux/of_i2c.h> -#include <linux/of_gpio.h> -#include <linux/pinctrl/consumer.h> #include <asm/irq.h> @@ -84,8 +82,6 @@ struct s3c24xx_i2c {struct i2c_adapter adap;struct s3c2410_platform_i2c *pdata; -int gpios[2 ]; -struct pinctrl *pctrl;#ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition;#endif @@ -856,57 +852,6 @@ static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) }#endif -#ifdef CONFIG_OF -static int s3c24xx_i2c_parse_dt_gpio (struct s3c24xx_i2c *i2c) -{ -int idx, gpio, ret; - -if (i2c->quirks &QUIRK_NO_GPIO ) -return 0 ; - -for (idx =0 ; idx <2 ; idx++) { - gpio =of_get_gpio (i2c->dev->of_node, idx); -if (!gpio_is_valid (gpio)) { -dev_err (i2c->dev,"invalid gpio[%d]: %d\n" , idx, gpio); - goto free_gpio; - } - i2c->gpios[idx] = gpio; - - ret =gpio_request (gpio,"i2c-bus" ); -if (ret) { -dev_err (i2c->dev,"gpio [%d] request failed\n" , gpio); - goto free_gpio; - } - } -return 0 ; - -free_gpio: -while (--idx >=0 ) -gpio_free (i2c->gpios[idx]); -return -EINVAL ; -} - -static void s3c24xx_i2c_dt_gpio_free (struct s3c24xx_i2c *i2c) -{ -unsigned int idx; - -if (i2c->quirks &QUIRK_NO_GPIO ) -return ; - -for (idx =0 ; idx <2 ; idx++) -gpio_free (i2c->gpios[idx]); -} -#else -static int s3c24xx_i2c_parse_dt_gpio (struct s3c24xx_i2c *i2c) -{ -return 0 ; -} - -static void s3c24xx_i2c_dt_gpio_free (struct s3c24xx_i2c *i2c) -{ -} -#endif -/* s3c24xx_i2c_init * * initialise the controller, set the IO lines and frequency @@ -1054,15 +999,9 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &pdev->dev; - i2c->pctrl =devm_pinctrl_get_select_default (i2c->dev); -/* inititalise the i2c gpio lines */ - -if (i2c->pdata->cfg_gpio) { +if (i2c->pdata->cfg_gpio) i2c->pdata->cfg_gpio (to_platform_device (i2c->dev)); - }else if (IS_ERR (i2c->pctrl) &&s3c24xx_i2c_parse_dt_gpio (i2c)) { -return -EINVAL ; - }/* initialise the i2c controller */ @@ -1140,10 +1079,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&i2c->adap);clk_disable_unprepare (i2c->clk); - -if (pdev->dev.of_node &&IS_ERR (i2c->pctrl)) -s3c24xx_i2c_dt_gpio_free (i2c); -return 0 ; }
PATCH 1/1 i2c: s3c24xx: allow device core to setup default pin configuration
Quoted 41 lines · Heiko St?bner
Hi Thomas,
Am Montag, 4. M?rz 2013, 14:42:53 schrieb Thomas Abraham:
Quoted 29 lines
With device core now able to setup the default pin configuration, the call to
devm_pinctrl_get_select_defaultcan be removed. And the pin configuration code based on the deprecated Samsung specific gpio bindings is also removed.Signed-off-by Thomas Abraham <[email protected]>---
Hi Heiko, Tomasz,
We have to make a choice on the path forward for pinctrl support on Samsung platforms. We have three cases to deal with.
A. Samsung platforms without DT support.
B. Samsung platforms with DT support using old Samsung specific
gpio bindings for pin-configuration (s3c24xx and s3x64xx).
C. Samsung platforms with DT support using using pinctrl based
pin-configurations (Exynos4 and Exynos5).For [A], we just let the platform specific callbacks handle the pin setup. For [B] and [C], based on Linus Walleij's pin grab by device core patch and subsequent discussions with him on the mailing list, would it be acceptable that we discontinue support for [B] in Samsung SoC device drivers. This will impact your current DT work on s3c24xx and s3c64xx platforms. Pinctrl is inevitable and we have to migrate to it. Instead of workarounds to maintain support for [B], it might be better that we migrate s3c24xx and s3c64xx platforms to pinctrl.
Quoted 1 line
Please do let us know your opinion on this.
As discusses in the other thread, I'm in favor of going forward this way and not to invest unnecessary energy in keeping the non-pinctrl stuff alive.
Pinctrl for at least the s3c2416 [0] is already on my playground-wishlist, but I'm still in the process of getting to know it.
So for this patch:
Quoted 8 lines
Acked-by Heiko Stuebner <[email protected]>Heiko
[0] in contrast to what the gpio-samsung driver implies, the s3c24xx pin banks are not uniform between SoCs, making this more difficult still :-)
Hi Heiko,
Thanks for the Ack. If the common samsung pinctrl support (pinctrl-samsung.c) is not well suited for s3c24xx platforms, we could write a separate pinctrl driver for s3c24xx platforms. But I guess we might be able to support s3c24xx which some changes to existing code. If there is anything that I can help with here, please do let me know.
Thanks,
Thomas.
Quoted 114 lines
Quoted 113 lines
drivers/i2c/busses/i2c-s3c2410.c | 67+------------------------------------- 1 files changed, 1 insertions(+), 66 deletions(-)
(quoted diff) +0
-0
b/drivers/i2c/busses/i2c-s3c2410.cindex f6b880b..703272c 100644drivers/i2c/busses/i2c-s3c2410.c +1
-66@@ -37,8 +37,6 @@#include <linux/slab.h> #include <linux/io.h> #include <linux/of_i2c.h> -#include <linux/of_gpio.h> -#include <linux/pinctrl/consumer.h> #include <asm/irq.h> @@ -84,8 +82,6 @@ struct s3c24xx_i2c {struct i2c_adapter adap;struct s3c2410_platform_i2c *pdata; -int gpios[2 ]; -struct pinctrl *pctrl;#ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition;#endif @@ -856,57 +852,6 @@ static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) }#endif -#ifdef CONFIG_OF -static int s3c24xx_i2c_parse_dt_gpio (struct s3c24xx_i2c *i2c) -{ -int idx, gpio, ret; - -if (i2c->quirks &QUIRK_NO_GPIO ) -return 0 ; - -for (idx =0 ; idx <2 ; idx++) { - gpio =of_get_gpio (i2c->dev->of_node, idx); -if (!gpio_is_valid (gpio)) { -dev_err (i2c->dev,"invalid gpio[%d]: %d\n" , idx, gpio); - goto free_gpio; - } - i2c->gpios[idx] = gpio; - - ret =gpio_request (gpio,"i2c-bus" ); -if (ret) { -dev_err (i2c->dev,"gpio [%d] request failed\n" , gpio); - goto free_gpio; - } - } -return 0 ; - -free_gpio: -while (--idx >=0 ) -gpio_free (i2c->gpios[idx]); -return -EINVAL ; -} - -static void s3c24xx_i2c_dt_gpio_free (struct s3c24xx_i2c *i2c) -{ -unsigned int idx; - -if (i2c->quirks &QUIRK_NO_GPIO ) -return ; - -for (idx =0 ; idx <2 ; idx++) -gpio_free (i2c->gpios[idx]); -} -#else -static int s3c24xx_i2c_parse_dt_gpio (struct s3c24xx_i2c *i2c) -{ -return 0 ; -} - -static void s3c24xx_i2c_dt_gpio_free (struct s3c24xx_i2c *i2c) -{ -} -#endif -/* s3c24xx_i2c_init * * initialise the controller, set the IO lines and frequency @@ -1054,15 +999,9 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &pdev->dev; - i2c->pctrl =devm_pinctrl_get_select_default (i2c->dev); -/* inititalise the i2c gpio lines */ - -if (i2c->pdata->cfg_gpio) { +if (i2c->pdata->cfg_gpio) i2c->pdata->cfg_gpio (to_platform_device (i2c->dev)); - }else if (IS_ERR (i2c->pctrl) &&s3c24xx_i2c_parse_dt_gpio (i2c)) { -return -EINVAL ; - }/* initialise the i2c controller */ @@ -1140,10 +1079,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&i2c->adap);clk_disable_unprepare (i2c->clk); - -if (pdev->dev.of_node &&IS_ERR (i2c->pctrl)) -s3c24xx_i2c_dt_gpio_free (i2c); -return 0 ; }
PATCH 1/1 i2c: s3c24xx: allow device core to setup default pin configuration
In reply to Thomas AbrahamQuoted 6 lines · Thomas Abraham
With device core now able to setup the default pin configuration, the call to
devm_pinctrl_get_select_defaultcan be removed. And the pin configuration code based on the deprecated Samsung specific gpio bindings is also removed.Signed-off-by Thomas Abraham <[email protected]>
Yours,
Linus Walleij
PATCH 1/1 i2c: s3c24xx: allow device core to setup default pin configuration
In reply to Thomas AbrahamQuoted 29 lines · Thomas Abraham
With device core now able to setup the default pin configuration, the call to
devm_pinctrl_get_select_defaultcan be removed. And the pin configuration code based on the deprecated Samsung specific gpio bindings is also removed.Signed-off-by Thomas Abraham <[email protected]>---
Hi Heiko, Tomasz,
We have to make a choice on the path forward for pinctrl support on Samsung platforms. We have three cases to deal with.
A. Samsung platforms without DT support.
B. Samsung platforms with DT support using old Samsung specific
gpio bindings for pin-configuration (s3c24xx and s3x64xx).
C. Samsung platforms with DT support using using pinctrl based
pin-configurations (Exynos4 and Exynos5).For [A], we just let the platform specific callbacks handle the pin setup. For [B] and [C], based on Linus Walleij's pin grab by device core patch and subsequent discussions with him on the mailing list, would it be acceptable that we discontinue support for [B] in Samsung SoC device drivers. This will impact your current DT work on s3c24xx and s3c64xx platforms. Pinctrl is inevitable and we have to migrate to it. Instead of workarounds to maintain support for [B], it might be better that we migrate s3c24xx and s3c64xx platforms to pinctrl.
Quoted 1 line
Please do let us know your opinion on this.
Dropping [B] sounds good, but I think it makes sense to wait with this patch until pinctrl support for s3c24xx is in place?
PATCH 1/1 i2c: s3c24xx: allow device core to setup default pin configuration
Am Donnerstag, 21. M?rz 2013, 11:00:32 schrieb Wolfram Sang:
Quoted 33 lines · Thomas Abraham
Quoted 32 lines
With device core now able to setup the default pin configuration, the call to
devm_pinctrl_get_select_defaultcan be removed. And the pin configuration code based on the deprecated Samsung specific gpio bindings is also removed.Signed-off-by Thomas Abraham <[email protected]>---
Hi Heiko, Tomasz,
We have to make a choice on the path forward for pinctrl support on Samsung platforms. We have three cases to deal with.
A. Samsung platforms without DT support.
B. Samsung platforms with DT support using old Samsung specificgpio bindings for pin-configuration (s3c24xx and s3x64xx).
C. Samsung platforms with DT support using using pinctrl based
pin-configurations (Exynos4 and Exynos5).
For [A], we just let the platform specific callbacks handle the pin setup. For [B] and [C], based on Linus Walleij's pin grab by device core patch and subsequent discussions with him on the mailing list, would it be acceptable that we discontinue support for [B] in Samsung SoC device drivers. This will impact your current DT work on s3c24xx and s3c64xx platforms. Pinctrl is inevitable and we have to migrate to it. Instead of workarounds to maintain support for [B], it might be better that we migrate s3c24xx and s3c64xx platforms to pinctrl.
Quoted 4 lines
Quoted 1 line
Please do let us know your opinion on this.
Dropping [B] sounds good, but I think it makes sense to wait with this patch until pinctrl support for s3c24xx is in place?
s3c24xx does not currently have dt support in mainline at all and the non-dt init is not touched at all. Also it seems the legacy gpio based dt init does not work at all currently, because the pinctrl function are no-ops and therefore the legacy gpio init is never reached on such systems.
So I would vote for dropping [B]. I'm already working a bit on a pinctrl driver for s3c24xx, so when I reintroduce s3c24xx dt support again, it should already have pinctrl support then.
Heiko