introduction of dmesg support
Subsystems (7)
v3 cover introduction of dmesg support
HI,
v3: add more swtich
we currently have 2 fifo at comsole level one for input one for output we fill the output fifo before any console is registered and then empty it
Now we introduce a new mecanism as in the kernel dmesg
we will always fill the dmesg kfifo with drivers output
as in barebox we have 2 world
device/drivers and applicaiotn (commands)
the verbositty of the printk can be selected at runtime and compilation
so for now on drivers will have to use pr_xxx and dev_xxx and application will use printf
dmesg will print the kfifo at any time
we will extend this later with more control of what the drivers output on the console or just in the fifo
This new feature is optionnal if dmes is disable we continue as before
The following changes since commit 94e71b843f6456abacc2fe76a5c375a461fabdf7:
libubi: Use global mtd_all_ff function (2013-03-04 10:54:46 +0100)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git delivery/dmesg
for you to fetch changes up to 564196ff6ca3e17652d4d78e0c7523771221919e:
barebox_banner: switch to pr_info (2013-03-04 19:28:05 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (9):
kfifo: introduce kfifo_dump_str to dump the fifo
console: switch to kfifo_dump_str
intoduce dmesg to print the barebox printk to dmesg ring buffer
startup: switch to pr_xxx
at91: clock switch to pr_info
meminfo: switch to pr_xxx
net/console: switch to pr_xxx
startup: switch to pr_xxx
barebox_banner: switch to pr_info
arch/arm/mach-at91/clock.c | 2 +- commands/Kconfig | 19 +++++++++++++++++++ common/console.c | 127 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--- common/meminfo.c | 6 +++--- common/startup.c | 12 ++++++------ common/version.c | 4 ++-- drivers/base/driver.c | 18 ++++++++++++------ include/kfifo.h | 2 ++ include/linux/barebox-wrapper.h | 11 ----------- include/printk.h | 68 ++++++++++++++++++++++++++++++++++++++++++++++++-------------------- lib/kfifo.c | 21 +++++++++++++++++++++ net/netconsole.c | 4 ++-- 12 files changed, 240 insertions(+), 54 deletions(-)
Best Regards,
J.
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 1/9 kfifo: introduce kfifo_dump_str to dump the fifo
This will allow to implement a dmesg mecanism in barebox
--- include/kfifo.h | 2 ++ lib/kfifo.c | 21 +++++++++++++++++++++ 2 files changed, 23 insertions(+)
include/kfifo.h +2 -0
@@ -74,5 +74,7 @@ static inline unsigned int kfifo_len(struct kfifo *fifo)void kfifo_putc (struct kfifo *fifo,unsigned char c);unsigned int kfifo_getc (struct kfifo *fifo,unsigned char *c); +void kfifo_dump_str (struct kfifo *fifo,void (*dump)(unsigned char c)); +#endif
lib/kfifo.c +21 -0
@@ -154,3 +154,24 @@ unsigned int kfifo_getc(struct kfifo *fifo, unsigned char *c)return 0 ; } +void kfifo_dump_str (struct kfifo *fifo,void (*dump)(unsigned char c)) +{ +int i; +unsigned char *c; +unsigned int l; +unsigned int len; + + len = fifo->in - fifo->out; + +/* first get the data from fifo->out until the end of the buffer */ + l =min (len, fifo->size - (fifo->out & (fifo->size -1 ))); + c = fifo->buffer + (fifo->out & (fifo->size -1 )); +for (i =0 ; i < l; i++) +dump (c[i]); + +/* then get the rest (if any) from the beginning of the buffer */ + c = fifo->buffer; + l = len - l; +for (i =0 ; i < l; i++) +dump (c[i]); +}
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 2/9 console: switch to kfifo_dump_str
--- common/console.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
common/console.c +6 -3
@@ -55,6 +55,11 @@ static struct kfifo __console_output_fifo;static struct kfifo *console_input_fifo = &__console_input_fifo;static struct kfifo *console_output_fifo = &__console_output_fifo; +static void console_output_dump (unsigned char ch) +{ +console_putc (CONSOLE_STDOUT , ch); +} +static int console_std_set (struct device_d *dev,struct param_d *param,const char *val) {
@@ -86,14 +91,12 @@ static int console_std_set(struct device_d *dev, struct param_d *param,dev_param_set_generic (dev, param, active);if (initialized <CONSOLE_INIT_FULL ) { -char ch; initialized =CONSOLE_INIT_FULL ;PUTS_LL ("Switch to console [" );PUTS_LL (dev_name (dev));PUTS_LL ("]\n" );barebox_banner (); -while (kfifo_getc (console_output_fifo, &ch) ==0 ) -console_putc (CONSOLE_STDOUT , ch); +kfifo_dump_str (console_output_fifo, console_output_dump); }return 0 ;
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 3/9 intoduce dmesg to print the barebox printk to dmesg ring buffer
In reply to Jean-Christophe PLAGNIOL-VILLARDthe size can be configured vai DMESG_KFIFO_OSIZE
1024 by default
4096 if DEBUG_INFO
the verbosity of the printk can now be change at runtime and default via PRINTK_LEVEL
rename dev_printf to dev_printk and update to printk
--- commands/Kconfig | 19 +++++++ common/console.c | 118 +++++++++++++++++++++++++++++++++++++++ drivers/base/driver.c | 18 ++++-- include/linux/barebox-wrapper.h | 11 ---- include/printk.h | 68 +++++++++++++++------- 5 files changed, 197 insertions(+), 37 deletions(-)
commands/Kconfig +19 -0
@@ -122,6 +122,25 @@ config CMD_TIME checking for ctrl-c, so the time command can be used with commands which are interruptible with ctrl-c. +config CMD_DMESG + bool "dmesg" + depends on CONSOLE_FULL + help + print the barebox output ring buffer + +if CMD_DMESG +config PRINTK_LEVEL + int "printk level" + range 0 7 + default 7 + +config DMESG_KFIFO_SIZE + prompt "kfifo dmesg size" + int + default 4086 if DEBUG_INFO + default 1024 +endif + config CMD_LINUX_EXEC bool "linux exec" depends on LINUX
common/console.c +118 -0
124 lines not on this page · raw message
drivers/base/driver.c +12 -6
@@ -364,23 +364,29 @@ const char *dev_id(const struct device_d *dev)return buf; } -int dev_printf (const struct device_d *dev,const char *format, ...) +#define PREFIX + +int dev_printk(const struct device_d *dev, int level, const char *format, ...) {va_list args; -int ret =0 ; +char printbuffer[CFG_PBSIZE ]; +char *s = printbuffer;if (dev->driver && dev->driver->name) - ret +=printf ("%s " , dev->driver->name); + s +=sprintf (s,"%s " , dev->driver->name); - ret +=printf ("%s: " ,dev_name (dev)); + s +=sprintf (s,"%s: " ,dev_name (dev));va_start (args, format); - ret +=vprintf (format, args); +vsprintf (s, format, args);va_end (args); -return ret; +if (IS_ENABLED (CONFIG_CMD_DMESG )) +return printk (KERN_SOH "%d%s" , level, printbuffer); +else +return printk ("%s" , printbuffer); }void devices_shutdown (void )
include/linux/barebox-wrapper.h +0 -11
@@ -9,17 +9,6 @@#define kfree (ptr) free(ptr)#define vfree (ptr) free(ptr) -#define KERN_EMERG ""/* system is unusable */ -#define KERN_ALERT ""/* action must be taken immediately */ -#define KERN_CRIT ""/* critical conditions */ -#define KERN_ERR ""/* error conditions */ -#define KERN_WARNING ""/* warning conditions */ -#define KERN_NOTICE ""/* normal but significant condition */ -#define KERN_INFO ""/* informational */ -#define KERN_DEBUG ""/* debug-level messages */ - -#define printk printf -#define pr_warn pr_warning#define __init
include/printk.h +48 -20
95 lines not on this page · raw message
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 4/9 startup: switch to pr_xxx
In reply to Jean-Christophe PLAGNIOL-VILLARD--- common/startup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
common/startup.c +2 -2
@@ -105,14 +105,14 @@ void __noreturn start_barebox(void)for (initcall = __barebox_initcalls_start; initcall < __barebox_initcalls_end; initcall++) { -debug ("initcall-> %pS\n" , *initcall); +pr_debug ("initcall-> %pS\n" , *initcall); result = (*initcall)();if (result)pr_err ("initcall %pS failed: %s\n" , *initcall,strerror (-result)); } -debug ("initcalls done\n" ); +pr_debug ("initcalls done\n" );if (IS_ENABLED (CONFIG_ENV_HANDLING )) {int ret;
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 5/9 at91: clock switch to pr_info
In reply to Jean-Christophe PLAGNIOL-VILLARD--- arch/arm/mach-at91/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-at91/clock.c +1 -1
@@ -756,7 +756,7 @@ static int at91_clock_display(void)if (pll_overclock)pr_info ("Clocks: PLLA overclocked, %ld MHz\n" , plla.rate_hz /1000000 ); -printf ("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n" , +pr_info ("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n" , cpu_freq /1000000 , (unsigned ) mck.rate_hz /1000000 , (unsigned ) main_clk.rate_hz /1000000 , ((unsigned ) main_clk.rate_hz %1000000 ) /1000 );
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 6/9 meminfo: switch to pr_xxx
In reply to Jean-Christophe PLAGNIOL-VILLARD--- common/meminfo.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
common/meminfo.c +3 -3
@@ -10,9 +10,9 @@ static int display_meminfo(void)ulong mend =mem_malloc_end ();ulong msize = mend - mstart +1 ; -debug ("barebox code: 0x%p -> 0x%p\n" , _stext, _etext -1 ); -debug ("bss segment: 0x%p -> 0x%p\n" , __bss_start, __bss_stop -1 ); -printf ("malloc space: 0x%08lx -> 0x%08lx (size %s)\n" , +pr_debug ("barebox code: 0x%p -> 0x%p\n" , _stext, _etext -1 ); +pr_debug ("bss segment: 0x%p -> 0x%p\n" , __bss_start, __bss_stop -1 ); +pr_info ("malloc space: 0x%08lx -> 0x%08lx (size %s)\n" , mstart, mend,size_human_readable (msize));return 0 ; }
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 7/9 net/console: switch to pr_xxx
In reply to Jean-Christophe PLAGNIOL-VILLARD--- net/netconsole.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/netconsole.c +2 -2
@@ -185,7 +185,7 @@ static int netconsole_init(void) ret =console_register (cdev);if (ret) { -printf ("netconsole: registering failed with %s\n" ,strerror (-ret)); +pr_err ("netconsole: registering failed with %s\n" ,strerror (-ret));kfree (priv);return ret; }
@@ -194,7 +194,7 @@ static int netconsole_init(void)dev_add_param (&cdev->class_dev,"port" , nc_port_set,NULL ,0 );dev_set_param (&cdev->class_dev,"port" ,"6666" ); -printf ("registered netconsole as %s%d\n" , cdev->class_dev.name, cdev->class_dev.id); +pr_info ("registered netconsole as %s%d\n" , cdev->class_dev.name, cdev->class_dev.id);return 0 ; }
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 8/9 startup: switch to pr_xxx
In reply to Jean-Christophe PLAGNIOL-VILLARD--- common/startup.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
common/startup.c +4 -4
@@ -120,7 +120,7 @@ void __noreturn start_barebox(void) ret =envfs_load (default_environment_path,"/env" ,0 );if (ret &&IS_ENABLED (CONFIG_DEFAULT_ENVIRONMENT )) { -printf ("no valid environment found on %s. " +pr_err ("no valid environment found on %s. " "Using default environment\n" , default_environment_path);envfs_load ("/dev/defaultenv" ,"/env" ,0 );
@@ -128,17 +128,17 @@ void __noreturn start_barebox(void) }if (IS_ENABLED (CONFIG_COMMAND_SUPPORT )) { -printf ("running /env/bin/init...\n" ); +pr_info ("running /env/bin/init...\n" );if (!stat ("/env/bin/init" , &s)) {run_command ("source /env/bin/init" ,0 ); }else { -printf ("not found\n" ); +pr_err ("/env/bin/init not found\n" ); } }if (!barebox_main) { -printf ("No main function! aborting.\n" ); +pr_err ("No main function! aborting.\n" );hang (); }
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 9/9 barebox_banner: switch to pr_info
In reply to Jean-Christophe PLAGNIOL-VILLARD--- common/version.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
common/version.c +2 -2
@@ -16,6 +16,6 @@ void barebox_banner (void)if (!board) board =CONFIG_BOARDINFO ; -printf ("\n\n%s\n\n" , version_string); -printf ("Board: %s\n" , board); +pr_info ("\n\n%s\n\n" , version_string); +pr_info ("Board: %s\n" , board); }
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox