ARM: bcm2835: convert to multi-platform
Subsystems (4)
RFC PATCH 1/1 ARM: bcm2835: convert to multi-platform
This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels.
This change:
* Moves bcm2835's debug-macro.S into ARM's include/debug/, and hooks it into the relevant menu.
* Moves bcm2835's Kconfig into its own directory, as seems typical for multi-platform conversions.
* Removes bcm2835_soc.h, and moves the content to the files where it was used; just one usage per define.
* Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform.
TO DO:
* It'd be nice to restore uncompress.h. I need to take a look at Shawn Guo's patches related to this, and presumably rebase this on top of them.
---
arch/arm/Kconfig | 22 +---------
arch/arm/Kconfig.debug | 5 +++
arch/arm/configs/bcm2835_defconfig | 2 +
.../mach/debug-macro.S => include/debug/bcm2835.S} | 3 +-
arch/arm/mach-bcm2835/Kconfig | 15 +++++++
arch/arm/mach-bcm2835/Makefile.boot | 1 -
arch/arm/mach-bcm2835/bcm2835.c | 6 ++-
arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h | 29 -------------
arch/arm/mach-bcm2835/include/mach/gpio.h | 1 -
arch/arm/mach-bcm2835/include/mach/timex.h | 26 ------------
arch/arm/mach-bcm2835/include/mach/uncompress.h | 44 --------------------
11 files changed, 30 insertions(+), 124 deletions(-)
rename arch/arm/{mach-bcm2835/include/mach/debug-macro.S => include/debug/bcm2835.S} (86%)
create mode 100644 arch/arm/mach-bcm2835/Kconfig
delete mode 100644 arch/arm/mach-bcm2835/Makefile.boot
delete mode 100644 arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h
delete mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
delete mode 100644 arch/arm/mach-bcm2835/include/mach/timex.h
delete mode 100644 arch/arm/mach-bcm2835/include/mach/uncompress.harch/arm/Kconfig +2 -20
@@ -362,26 +362,6 @@ config ARCH_AT91 This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. -config ARCH_BCM2835 - bool "Broadcom BCM2835 family" - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_ERRATA_411920 - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select CLKSRC_OF - select COMMON_CLK - select CPU_V6 - select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select PINCTRL - select PINCTRL_BCM2835 - select SPARSE_IRQ - select USE_OF - help - This enables support for the Broadcom BCM2835 SoC. This SoC is - use in the Raspberry Pi, and Roku 2 devices. - config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" select ARM_GIC
@@ -1037,6 +1017,8 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm/Kconfig" +source "arch/arm/mach-bcm2835/Kconfig" + source "arch/arm/mach-clps711x/Kconfig" source "arch/arm/mach-cns3xxx/Kconfig"
arch/arm/Kconfig.debug +5 -0
@@ -89,6 +89,10 @@ choice bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 + config DEBUG_BCM2835 + bool "Kernel low-level debugging on BCM2835 PL011 UART" + depends on ARCH_BCM2835 + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X
@@ -579,6 +583,7 @@ endchoice config DEBUG_LL_INCLUDE string + default "debug/bcm2835.S" if DEBUG_BCM2835 default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \
arch/arm/configs/bcm2835_defconfig +2 -0
@@ -29,6 +29,8 @@ CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y +CONFIG_ARCH_MULTI_V6=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_BCM2835=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y
arch/arm/include/debug/bcm2835.S renamed from arch/arm/mach-bcm2835/include/mach/debug-macro.S +2 -1
@@ -11,7 +11,8 @@ * */ -#include <mach/bcm2835_soc.h> +#define BCM2835_DEBUG_PHYS 0x20201000 +#define BCM2835_DEBUG_VIRT 0xf0201000 .macro addruart, rp, rv, tmp ldr \rp, =BCM2835_DEBUG_PHYS
arch/arm/mach-bcm2835/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +config ARCH_BCM2835 + bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_ERRATA_411920 + select ARM_TIMER_SP804 + select CLKDEV_LOOKUP + select CLKSRC_OF + select CPU_V6 + select GENERIC_CLOCKEVENTS + select PINCTRL + select PINCTRL_BCM2835 + help + This enables support for the Broadcom BCM2835 SoC. This SoC is + use in the Raspberry Pi, and Roku 2 devices.
arch/arm/mach-bcm2835/Makefile.boot deleted +0 -1
@@ -1 +0,0 @@ -zreladdr-y := 0x00008000
arch/arm/mach-bcm2835/bcm2835.c +4 -2
@@ -23,8 +23,6 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/bcm2835_soc.h> -#define PM_RSTC 0x1c#define PM_RSTS 0x20#define PM_WDOG 0x24
@@ -34,6 +32,10 @@#define PM_RSTC_WRCFG_FULL_RESET 0x00000020#define PM_RSTS_HADWRH_SET 0x00000040 +#define BCM2835_PERIPH_PHYS 0x20000000 +#define BCM2835_PERIPH_VIRT 0xf0000000 +#define BCM2835_PERIPH_SIZE SZ_16M +static void __iomem *wdt_regs;/*
arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h deleted +0 -29
@@ -1,29 +0,0 @@ -/* -* Copyright (C) 2012 Stephen Warren -* -* Derived from code: -* Copyright (C) 2010 Broadcom -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -*/ - -#ifndef __MACH_BCM2835_BCM2835_SOC_H__ -#define __MACH_BCM2835_BCM2835_SOC_H__ - -#include <asm/sizes.h> - -#define BCM2835_PERIPH_PHYS 0x20000000 -#define BCM2835_PERIPH_VIRT 0xf0000000 -#define BCM2835_PERIPH_SIZE SZ_16M -#define BCM2835_DEBUG_PHYS 0x20201000 -#define BCM2835_DEBUG_VIRT 0xf0201000 - -#endif
arch/arm/mach-bcm2835/include/mach/gpio.h deleted +0 -1
@@ -1 +0,0 @@ -/* empty */
arch/arm/mach-bcm2835/include/mach/timex.h deleted +0 -26
@@ -1,26 +0,0 @@ -/* -* BCM2835 system clock frequency -* -* Copyright (C) 2010 Broadcom -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE (1000000) - -#endif
arch/arm/mach-bcm2835/include/mach/uncompress.h deleted +0 -44
44 lines not on this page · raw message
Signature · 1 line
1.7.10.4
RFC PATCH 1/1 ARM: bcm2835: convert to multi-platform
Quoted 13 lines · Stephen Warren
This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels.
This change:
* Moves bcm2835'sdebug-macro.Sinto ARM'sinclude/debug/, and hooks it into the relevant menu.
* Moves bcm2835'sKconfiginto its own directory, as seems typical for multi-platform conversions.
* Removesbcm2835_soc.h, and moves the content to the files where it was used; just one usage per define.
* Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform.
Quoted 4 lines
TO DO:
* It'd be nice to restoreuncompress.h. I need to take a look at Shawn Guo's patches related to this, and presumably rebase this on top of them.
You do not need to restore uncompress.h, and from what I've seen, with my patches in place, uncompress debug will probably just work on BCM2835 out of box (you need to have DEBUG_LL selected for BCM2835).
Shawn
RFC PATCH 1/1 ARM: bcm2835: convert to multi-platform
Quoted 14 lines · Shawn Guo
Quoted 13 lines · Stephen Warren
This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels.
This change:
* Moves bcm2835'sdebug-macro.Sinto ARM'sinclude/debug/, and hooks it into the relevant menu.
* Moves bcm2835'sKconfiginto its own directory, as seems typical for multi-platform conversions.
* Removesbcm2835_soc.h, and moves the content to the files where it was used; just one usage per define.
* Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform.
Quoted 8 lines
Quoted 4 lines
TO DO:
* It'd be nice to restoreuncompress.h. I need to take a look at Shawn Guo's patches related to this, and presumably rebase this on top of them.You do not need to restore
uncompress.h, and from what I've seen, with my patches in place, uncompress debug will probably just work on BCM2835 out of box (you need to haveDEBUG_LLselected for BCM2835).
Should the usual "Uncompressing kernel" message show up automatically then? I don't think it did, which is why I mentioned that "TO DO". I almost always run with DEBUG_LL enabled and earlyprintk in the kernel command-line, but I should double-check I didn't accidentally drop it when testing this patch.
RFC PATCH 1/1 ARM: bcm2835: convert to multi-platform
Quoted 9 lines · Stephen Warren
Quoted 8 lines
Quoted 4 lines
TO DO:
* It'd be nice to restoreuncompress.h. I need to take a look at Shawn Guo's patches related to this, and presumably rebase this on top of them.You do not need to restore
uncompress.h, and from what I've seen, with my patches in place, uncompress debug will probably just work on BCM2835 out of box (you need to haveDEBUG_LLselected for BCM2835).
Quoted 5 lines
Should the usual "Uncompressing kernel" message show up automatically then? I don't think it did, which is why I mentioned that "TO DO". I almost always run with
DEBUG_LLenabled and earlyprintk in the kernel command-line, but I should double-check I didn't accidentally drop it when testing this patch.
Yes, if you have both DEBUG_LL and DEBUG_BCM2835 set, I would expect you can see "Uncompressing kernel" message.
Shawn
RFC PATCH 1/1 ARM: bcm2835: convert to multi-platform
Quoted 10 lines · Shawn Guo
Quoted 9 lines · Stephen Warren
Quoted 8 lines
Quoted 4 lines
TO DO:
* It'd be nice to restoreuncompress.h. I need to take a look at Shawn Guo's patches related to this, and presumably rebase this on top of them.You do not need to restore
uncompress.h, and from what I've seen, with my patches in place, uncompress debug will probably just work on BCM2835 out of box (you need to haveDEBUG_LLselected for BCM2835).
Quoted 8 lines
Quoted 5 lines
Should the usual "Uncompressing kernel" message show up automatically then? I don't think it did, which is why I mentioned that "TO DO". I almost always run with
DEBUG_LLenabled and earlyprintk in the kernel command-line, but I should double-check I didn't accidentally drop it when testing this patch.Yes, if you have both
DEBUG_LLandDEBUG_BCM2835set, I would expect you can see "Uncompressing kernel" message.
Ah yes. I just tried it again, and it does work perfectly. Thanks.
RFC PATCH 1/1 ARM: bcm2835: convert to multi-platform
In reply to Stephen WarrenQuoted 12 lines · Stephen Warren
This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels.
This change:
* Moves bcm2835'sdebug-macro.Sinto ARM'sinclude/debug/, and hooks it into the relevant menu.
* Moves bcm2835'sKconfiginto its own directory, as seems typical for multi-platform conversions.
* Removesbcm2835_soc.h, and moves the content to the files where it was used; just one usage per define.
* Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform.
Nice work!
Quoted 4 lines
TO DO:
* It'd be nice to restoreuncompress.h. I need to take a look at Shawn Guo's patches related to this, and presumably rebase this on top of them.
As Shawn said, that should not even be necessary.
Quoted 1 line
Signed-off-by Stephen Warren <[email protected]>
RFC PATCH 1/1 ARM: bcm2835: convert to multi-platform
In reply to Stephen WarrenQuoted 12 lines · Stephen Warren
This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels.
This change:
* Moves bcm2835'sdebug-macro.Sinto ARM'sinclude/debug/, and hooks it into the relevant menu.
* Moves bcm2835'sKconfiginto its own directory, as seems typical for multi-platform conversions.
* Removesbcm2835_soc.h, and moves the content to the files where it was used; just one usage per define.
* Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform.
I have applied this to bcm2835's for-3.10/multiplatform branch, with the TODO message removed from the commit description.