Skip to contentSkip to conversation

ARM: shmobile: add R8A7778 Bock-W board support

PATCH Superseded Kuninori Morimoto 3 participants 12 messages Mar 12, 2013 – Mar 27, 2013

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v2 cover ARM: shmobile: add R8A7778 Bock-W board support

Hi Simon, Magnus, and all

These are v2 patch set of R8A7778 R-Car M1 SoC/board support This SoC/board support have limited DT only.
In the future improved PINCTRL and clock framework support will be added v2 patch set include DT as default

Bock-W board needs ${LINUX}/arch/arm/tools/mach-types

bockw MACH_BOCKW BOCKW 3386

ARM Web site already has Bock-W, mach-types will be updated if upstream kernel has it.

These patches are based on simon/next branch

Kuninori Morimoto (3):
[PATCH 1/3] ARM: shmobile: add R8A7778 setup support [PATCH 2/3] ARM: shmobile: r8a7778 SCIF support [PATCH 3/3] ARM: shmobile: add R-Car M1A Bock-W platform support

 arch/arm/boot/dts/Makefile                    |    1 +
 arch/arm/boot/dts/r8a7778-bockw.dts           |   32 +++
 arch/arm/boot/dts/r8a7778.dtsi                |   35 +++
 arch/arm/configs/bockw_defconfig              |   95 ++++++++
 arch/arm/mach-shmobile/Kconfig                |   11 +
 arch/arm/mach-shmobile/Makefile               |    2 +
 arch/arm/mach-shmobile/board-bockw.c          |   37 +++
 arch/arm/mach-shmobile/clock-r8a7778.c        |  104 +++++++++
 arch/arm/mach-shmobile/include/mach/r8a7778.h |   29 +++
 arch/arm/mach-shmobile/setup-r8a7778.c        |  311 +++++++++++++++++++++++++
 10 files changed, 657 insertions(+)

This is my command for DT uImage

PC> make bockw_defconfig
PC> make menuconfig
[Boot options]
- [Flattened Device Tree support]
- [Use appended device tree blob to zImage (EXPERIMENTAL)]
[System Type]
- [BOCK-W platform - Reference Device Tree Implementation]

PC> make zImage
PC> make dtbs
PC> duImage r8a7778-bockw-reference
PC> cp arch/sh/boot/duImage ${PATH}

---- duImage --------------------------------
#! /bin/sh

# create zImage + dtb = dzImage
cat arch/arm/boot/zImage arch/arm/boot/dts/${1}.dtb > arch/arm/boot/dzImage
# create duImage
DUIMAGE=`cut -f 3- -d ' ' < arch/arm/boot/.uImage.cmd | sed -e "s/zImage/dzImage/" | sed -e "s/uImage/duImage/"`
${DUIMAGE}%
----------------------------------------------

Best regards
---
Kuninori Morimoto

#1 lore raw

Hi

Quoted 3 lines

Bock-W board needs ${LINUX}/arch/arm/tools/mach-types

bockw MACH_BOCKW BOCKW 3386

Sorry, this was wrong.
It is not needed on DT.

Best regards
---
Kuninori Morimoto

#2 lore raw

v3 cover ARM: shmobile: add R8A7778 Bock-W board support v3

In reply to Kuninori Morimoto

Hi Simon, Magnus, Arnd

These are v3 patch set of R8A7778 R-Car M1 SoC/board support This SoC/board support have limited DT only. (TMU/SCIF can't use DT at this point)

I will work for external IRQ and SMSC support
if these are accepted.

These patches are based on simon/next branch

Kuninori Morimoto (3):
ARM: shmobile: add R8A7778 basis support
ARM: shmobile: r8a7778 SCIF support
ARM: shmobile: add R-Car M1A Bock-W platform support

 arch/arm/boot/dts/Makefile                    |    1 +
 arch/arm/boot/dts/r8a7778-bockw.dts           |   32 ++++
 arch/arm/boot/dts/r8a7778.dtsi                |   35 +++++
 arch/arm/configs/bockw_defconfig              |   66 +++++++++
 arch/arm/mach-shmobile/Kconfig                |   12 ++
 arch/arm/mach-shmobile/Makefile               |    2 +
 arch/arm/mach-shmobile/board-bockw.c          |   43 ++++++
 arch/arm/mach-shmobile/clock-r8a7778.c        |  104 +++++++++++++
 arch/arm/mach-shmobile/include/mach/r8a7778.h |   28 ++++
 arch/arm/mach-shmobile/setup-r8a7778.c        |  193 +++++++++++++++++++++++++
 10 files changed, 516 insertions(+)

This is my command for DT uImage

PC> make bockw_defconfig
PC> make menuconfig
PC> make zImage
PC> make dtbs
PC> duImage r8a7778-bockw-reference
PC> cp arch/sh/boot/duImage ${PATH}

---- duImage --------------------------------
#! /bin/sh

# create zImage + dtb = dzImage
cat arch/arm/boot/zImage arch/arm/boot/dts/${1}.dtb > arch/arm/boot/dzImage
# create duImage
DUIMAGE=`cut -f 3- -d ' ' < arch/arm/boot/.uImage.cmd | sed -e "s/zImage/dzImage/" | sed -e "s/uImage/duImage/"`
${DUIMAGE}%
----------------------------------------------

Best regards
---
Kuninori Morimoto

#3 lore raw

PATCH v3 1/3 ARM: shmobile: add R8A7778 basis support

Add initial support for the R8A7778 R-Car M1A SoC. No static virtual mappings are used, all the components make use of ioremap().
DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.

It is based on v1.0 datasheet

---
v2 -> v3

- it used platform_device_register_full()
- removed r8a7778_clock_init() from setup-r8a7778.c
- cleanup code

 arch/arm/boot/dts/r8a7778.dtsi                |   35 ++++++
 arch/arm/mach-shmobile/Kconfig                |    6 +
 arch/arm/mach-shmobile/Makefile               |    1 +
 arch/arm/mach-shmobile/clock-r8a7778.c        |   91 ++++++++++++++
 arch/arm/mach-shmobile/include/mach/r8a7778.h |   28 +++++
 arch/arm/mach-shmobile/setup-r8a7778.c        |  167 +++++++++++++++++++++++++
 6 files changed, 328 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7778.dtsi
 create mode 100644 arch/arm/mach-shmobile/clock-r8a7778.c
 create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7778.h
 create mode 100644 arch/arm/mach-shmobile/setup-r8a7778.c
arch/arm/boot/dts/r8a7778.dtsi new file +35 -0
new file mode 100644
index 0000000..4743735
@@ -0,0 +1,35 @@
+/*
+ * Device Tree Source for Renesas r8a7778
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <[email protected]>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,r8a7778";
+
+	cpus {
+		cpu at 0 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	gic: interrupt-controller at fe438000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfe438000 0x1000>,
+		      <0xfe430000 0x100>;
+	};
+};
arch/arm/mach-shmobile/Kconfig +6 -0
index eb3a7ff..aa273a5 100644
@@ -24,6 +24,12 @@ config ARCH_R8A7740
 	select CPU_V7
 	select SH_CLK_CPG
 
+config ARCH_R8A7778
+	bool "R-Car M1 (R8A77780)"
+	select CPU_V7
+	select SH_CLK_CPG
+	select ARM_GIC
+
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
arch/arm/mach-shmobile/Makefile +1 -0
index c621edf..0f50a3c 100644
@@ -9,6 +9,7 @@ obj-y				:= timer.o console.o clock.o
 obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
 obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
 
arch/arm/mach-shmobile/clock-r8a7778.c new file +91 -0

91 lines not on this page · raw message

arch/arm/mach-shmobile/include/mach/r8a7778.h new file +28 -0
new file mode 100644
index 0000000..a755dca
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef __ASM_R8A7778_H__
+#define __ASM_R8A7778_H__
+
+extern void r8a7778_add_standard_devices(void);
+extern void r8a7778_add_standard_devices_dt(void);
+extern void r8a7778_init_delay(void);
+extern void r8a7778_init_irq(void);
+extern void r8a7778_init_irq_dt(void);
+extern void r8a7778_clock_init(void);
+
+#endif /* __ASM_R8A7778_H__ */
arch/arm/mach-shmobile/setup-r8a7778.c new file +167 -0

167 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#4 lore raw

PATCH v3 1/3 ARM: shmobile: add R8A7778 basis support

Quoted 9 lines · Kuninori Morimoto

Add initial support for the R8A7778 R-Car M1A SoC. No static virtual mappings are used, all the components make use of ioremap().
DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.

It is based on v1.0 datasheet

Thanks, queued up for v3.10 in the soc branch.

#5 lore raw

PATCH v3 2/3 ARM: shmobile: r8a7778 SCIF support

In reply to Kuninori Morimoto

Add SCIF serial port support to the r8a7778 SoC by adding platform devices together with clock bindings. DT device description is excluded at this point since such bindings are still under development.

---
v2 -> v3

- it used platform_device_register_data()

 arch/arm/mach-shmobile/clock-r8a7778.c |   13 +++++++++++++
 arch/arm/mach-shmobile/setup-r8a7778.c |   26 ++++++++++++++++++++++++++
 2 files changed, 39 insertions(+)
arch/arm/mach-shmobile/clock-r8a7778.c +13 -0
index 387e3b7..f1277f4 100644
@@ -58,16 +58,29 @@ static struct clk *main_clks[] = {
 };
 
 enum {
+	MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP026] = SH_CLK_MSTP32(&clkp, MSTPCR0, 26, 0), /* SCIF0 */
+	[MSTP025] = SH_CLK_MSTP32(&clkp, MSTPCR0, 25, 0), /* SCIF1 */
+	[MSTP024] = SH_CLK_MSTP32(&clkp, MSTPCR0, 24, 0), /* SCIF2 */
+	[MSTP023] = SH_CLK_MSTP32(&clkp, MSTPCR0, 23, 0), /* SCIF3 */
+	[MSTP022] = SH_CLK_MSTP32(&clkp, MSTPCR0, 22, 0), /* SCIF4 */
+	[MSTP021] = SH_CLK_MSTP32(&clkp, MSTPCR0, 21, 0), /* SCIF5 */
 	[MSTP016] = SH_CLK_MSTP32(&clkp, MSTPCR0, 16, 0), /* TMU0 */
 	[MSTP015] = SH_CLK_MSTP32(&clkp, MSTPCR0, 15, 0), /* TMU1 */
 };
 
 static struct clk_lookup lookups[] = {
 	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
 };
arch/arm/mach-shmobile/setup-r8a7778.c +26 -0
index 811ccf3..01c62be 100644
@@ -25,6 +25,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/irqchip.h>
+#include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/irqs.h>
 #include <mach/r8a7778.h>
@@ -32,6 +33,26 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 
+/* SCIF */
+#define SCIF_INFO(baseaddr, irq)				\
+{								\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+	.scbrr_algo_id	= SCBRR_ALGO_2,				\
+	.type		= PORT_SCIF,				\
+	.irqs		= SCIx_IRQ_MUXED(irq),			\
+}
+
+static struct plat_sci_port scif_platform_data[] = {
+	SCIF_INFO(0xffe40000, gic_iid(0x66)),
+	SCIF_INFO(0xffe41000, gic_iid(0x67)),
+	SCIF_INFO(0xffe42000, gic_iid(0x68)),
+	SCIF_INFO(0xffe43000, gic_iid(0x69)),
+	SCIF_INFO(0xffe44000, gic_iid(0x6a)),
+	SCIF_INFO(0xffe45000, gic_iid(0x6b)),
+};
+
 /* TMU */
 static struct resource sh_tmu0_resources[] = {
 	DEFINE_RES_MEM(0xffd80008, 12),
@@ -88,6 +109,11 @@ void __init r8a7778_add_standard_devices(void)
 	}
 #endif
 
+	for (i = 0; i < ARRAY_SIZE(scif_platform_data); i++)
+		platform_device_register_data(&platform_bus, "sh-sci", i,
+					      &scif_platform_data[i],
+					      sizeof(struct plat_sci_port));
+
 	for (i = 0; i < ARRAY_SIZE(platform_devinfo); i++)
 		platform_device_register_full(&platform_devinfo[i]);
 }
Signature · 1 line
1.7.9.5
#6 lore raw

PATCH v3 2/3 ARM: shmobile: r8a7778 SCIF support

Quoted 6 lines · Kuninori Morimoto

Add SCIF serial port support to the r8a7778 SoC by adding platform devices together with clock bindings. DT device description is excluded at this point since such bindings are still under development.

Thanks, queued up for v3.10 in the soc branch.

#7 lore raw

PATCH v3 3/3 ARM: shmobile: add R-Car M1A Bock-W platform support

In reply to Kuninori Morimoto

Add basic Bock-W board support

More devices will be added on top of this patch after PICNTRL and clock framework are in better shape.

---
v2 -> v3

- fixup compatible name
- r8a7778_clock_init() is called from board code

 arch/arm/boot/dts/Makefile           |    1 +
 arch/arm/boot/dts/r8a7778-bockw.dts  |   32 +++++++++++++++++
 arch/arm/configs/bockw_defconfig     |   66 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-shmobile/Kconfig       |    6 ++++
 arch/arm/mach-shmobile/Makefile      |    1 +
 arch/arm/mach-shmobile/board-bockw.c |   43 ++++++++++++++++++++++
 6 files changed, 149 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7778-bockw.dts
 create mode 100644 arch/arm/configs/bockw_defconfig
 create mode 100644 arch/arm/mach-shmobile/board-bockw.c
arch/arm/boot/dts/Makefile +1 -0
index ee9fbe4..363fa507 100644
@@ -136,6 +136,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
 	ccu9540.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
 	r8a7740-armadillo800eva.dtb \
+	r8a7778-bockw.dtb \
 	r8a7779-marzen-reference.dtb \
 	sh73a0-kzm9g.dtb \
 	sh73a0-kzm9g-reference.dtb \
arch/arm/boot/dts/r8a7778-bockw.dts new file +32 -0
new file mode 100644
index 0000000..735c964
@@ -0,0 +1,32 @@
+/*
+ * Reference Device Tree Source for the Bock-W board
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <[email protected]>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7778.dtsi"
+
+/ {
+	model = "bockw";
+	compatible = "renesas,bockw", "renesas,r8a7778";
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>;
+	};
+};
arch/arm/configs/bockw_defconfig new file +66 -0

66 lines not on this page · raw message

arch/arm/mach-shmobile/Kconfig +6 -0
index aa273a5..e5cd4d8 100644
@@ -104,6 +104,12 @@ config MACH_ARMADILLO800EVA
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 
+config MACH_BOCKW
+	bool "BOCK-W platform"
+	depends on ARCH_R8A7778
+	select ARCH_REQUIRE_GPIOLIB
+	select USE_OF
+
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
arch/arm/mach-shmobile/Makefile +1 -0
index 0f50a3c..b6cf0f4 100644
@@ -38,6 +38,7 @@ obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
+obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
arch/arm/mach-shmobile/board-bockw.c new file +43 -0

43 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#8 lore raw

PATCH v3 3/3 ARM: shmobile: add R-Car M1A Bock-W platform support

Quoted 6 lines · Kuninori Morimoto

Add basic Bock-W board support

More devices will be added on top of this patch after PICNTRL and clock framework are in better shape.

Thanks, queued up for v3.10 in the boards branch.

#9 lore raw

v3 cover ARM: shmobile: add R8A7778 Bock-W board support v3

In reply to Kuninori Morimoto
Quoted 11 lines · Kuninori Morimoto

Hi Simon, Magnus, Arnd

These are v3 patch set of R8A7778 R-Car M1 SoC/board support This SoC/board support have limited DT only. (TMU/SCIF can't use DT at this point)

I will work for external IRQ and SMSC support
if these are accepted.

These patches are based on simon/next branch

Good choice :^)

I have no objections to these changes at this point but I would appreciate an ack from Magnus before applying them.

Quoted 45 lines

Kuninori Morimoto (3):
ARM: shmobile: add R8A7778 basis support
ARM: shmobile: r8a7778 SCIF support
ARM: shmobile: add R-Car M1A Bock-W platform support

 arch/arm/boot/dts/Makefile                    |    1 +
 arch/arm/boot/dts/r8a7778-bockw.dts           |   32 ++++
 arch/arm/boot/dts/r8a7778.dtsi                |   35 +++++
 arch/arm/configs/bockw_defconfig              |   66 +++++++++
 arch/arm/mach-shmobile/Kconfig                |   12 ++
 arch/arm/mach-shmobile/Makefile               |    2 +
 arch/arm/mach-shmobile/board-bockw.c          |   43 ++++++
 arch/arm/mach-shmobile/clock-r8a7778.c        |  104 +++++++++++++
 arch/arm/mach-shmobile/include/mach/r8a7778.h |   28 ++++
 arch/arm/mach-shmobile/setup-r8a7778.c        |  193 +++++++++++++++++++++++++
 10 files changed, 516 insertions(+)

This is my command for DT uImage

PC> make bockw_defconfig
PC> make menuconfig
PC> make zImage
PC> make dtbs
PC> duImage r8a7778-bockw-reference
PC> cp arch/sh/boot/duImage ${PATH}

---- duImage --------------------------------
#! /bin/sh

# create zImage + dtb = dzImage
cat arch/arm/boot/zImage arch/arm/boot/dts/${1}.dtb > arch/arm/boot/dzImage
# create duImage
DUIMAGE=`cut -f 3- -d ' ' < arch/arm/boot/.uImage.cmd | sed -e "s/zImage/dzImage/" | sed -e "s/uImage/duImage/"`
${DUIMAGE}%
----------------------------------------------

Best regards
---
Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

maintainer
#10 lore raw

v3 cover ARM: shmobile: add R8A7778 Bock-W board support v3

Hi Simon, Morimoto-san,

Quoted 11 lines · Simon Horman
Quoted 10 lines · Kuninori Morimoto

Hi Simon, Magnus, Arnd

These are v3 patch set of R8A7778 R-Car M1 SoC/board support This SoC/board support have limited DT only. (TMU/SCIF can't use DT at this point)

I will work for external IRQ and SMSC support
if these are accepted.

Quoted 6 lines
Quoted 1 line

These patches are based on simon/next branch

Good choice :^)

I have no objections to these changes at this point but I would appreciate an ack from Magnus before applying them.

I've looked through this series and they look good to me.

#11 lore raw

v3 cover ARM: shmobile: add R8A7778 Bock-W board support v3

Quoted 16 lines · Magnus Damm

Hi Simon, Morimoto-san,

Quoted 13 lines · Simon Horman
Quoted 11 lines · Kuninori Morimoto

Hi Simon, Magnus, Arnd

These are v3 patch set of R8A7778 R-Car M1 SoC/board support This SoC/board support have limited DT only. (TMU/SCIF can't use DT at this point)

I will work for external IRQ and SMSC support
if these are accepted.

These patches are based on simon/next branch

Quoted 8 lines
Quoted 4 lines

Good choice :^)

I have no objections to these changes at this point but I would appreciate an ack from Magnus before applying them.

I've looked through this series and they look good to me.

Thanks, I will queue them up.