Skip to contentSkip to conversation

pwm: samsung: convert s3c_pwm to dev_pm_ops

PATCH Applied Jingoo Han 2 participants 2 messages Mar 8, 2013 – Mar 22, 2013

Subsystems (2)
lore
Share & tools
lore

Jingoo Han

author
#0 lore raw

PATCH 1/1 pwm: samsung: convert s3c_pwm to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management.

---
 drivers/pwm/pwm-samsung.c |   20 +++++++++-----------
 1 files changed, 9 insertions(+), 11 deletions(-)
drivers/pwm/pwm-samsung.c +9 -11
index 5207e6c..a0ece50 100644
@@ -289,10 +289,10 @@ static int s3c_pwm_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int s3c_pwm_suspend(struct device *dev)
 {
-	struct s3c_chip *s3c = platform_get_drvdata(pdev);
+	struct s3c_chip *s3c = dev_get_drvdata(dev);
 
 	/* No one preserve these values during suspend so reset them
 	 * Otherwise driver leaves PWM unconfigured if same values
@@ -304,9 +304,9 @@ static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int s3c_pwm_resume(struct platform_device *pdev)
+static int s3c_pwm_resume(struct device *dev)
 {
-	struct s3c_chip *s3c = platform_get_drvdata(pdev);
+	struct s3c_chip *s3c = dev_get_drvdata(dev);
 	unsigned long tcon;
 
 	/* Restore invertion */
@@ -316,21 +316,19 @@ static int s3c_pwm_resume(struct platform_device *pdev)
 
 	return 0;
 }
-
-#else
-#define s3c_pwm_suspend NULL
-#define s3c_pwm_resume NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(s3c_pwm_pm_ops, s3c_pwm_suspend,
+			s3c_pwm_resume);
+
 static struct platform_driver s3c_pwm_driver = {
 	.driver		= {
 		.name	= "s3c24xx-pwm",
 		.owner	= THIS_MODULE,
+		.pm	= &s3c_pwm_pm_ops,
 	},
 	.probe		= s3c_pwm_probe,
 	.remove		= s3c_pwm_remove,
-	.suspend	= s3c_pwm_suspend,
-	.resume		= s3c_pwm_resume,
 };
 
 static int __init pwm_init(void)
Signature · 1 line
1.7.2.5
#1 lore raw
Quoted 7 lines · Jingoo Han

Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management.

---
 drivers/pwm/pwm-samsung.c |   20 +++++++++-----------
 1 files changed, 9 insertions(+), 11 deletions(-)

Applied, thanks.

Thierry