README: document the requirements for CONFIG_SYS_HZ
PATCH 1/1 README: document the requirements for CONFIG_SYS_HZ
CONFIG_SYS_HZ must be 1000, and get_timer() must therefore return mS. Document this.
--- README | 6 ++++++ 1 file changed, 6 insertions(+)
README +6 -0
@@ -495,6 +495,12 @@ The following options need to be configured: exists, unlike the similar options in the Linux kernel. Do not set these options unless they apply! +- CPU timer options: + CONFIG_SYS_HZ + + The frequency of the timer returned by get_timer(). This value + MUST be 1000. + - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ
Signature · 1 line
1.7.10.4
PATCH 1/1 README: document the requirements for CONFIG_SYS_HZ
Dear Stephen,
Quoted 2 lines · In message <[email protected]> you wrote:
CONFIG_SYS_HZmust be 1000, andget_timer()must therefore return mS. Document this.
"must return mS" ? "mS" means Milli-Siemens, which is a unit of electric conductance and electric admittance. You mean "ms" = milliseconds ...
README The following options need to be configured: · line 502
Quoted 5 lines
+- CPU timer options:
README +4
-0+ CONFIG_SYS_HZ + + The frequency of the timer returned by get_timer(). This value + MUST be 1000.
This is misleading, or even incorrect. If I read this, I would expect that get_timer() returns 1000. Obviously, this is incorrect. Instead, get_timer() returns timestamp information in millisecond resolution.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Crash programs fail because they are based on the theory that, with nine women pregnant, you can get a baby a month. - Wernher von Braun
PATCH 1/1 README: document the requirements for CONFIG_SYS_HZ
Quoted 9 lines · Wolfgang Denk
Dear Stephen,
Quoted 2 lines · In message <[email protected]> you wrote:
CONFIG_SYS_HZmust be 1000, andget_timer()must therefore return mS. Document this."must return mS" ? "mS" means Milli-Siemens, which is a unit of electric conductance and electric admittance. You mean "ms" = milliseconds ...
It seems that's true.
Quoted 9 lines
README The following options need to be configured: · line 502
Quoted 5 lines
+- CPU timer options:
README +4
-0+ CONFIG_SYS_HZ + + The frequency of the timer returned by get_timer(). This value + MUST be 1000.This is misleading, or even incorrect. If I read this, I would expect that
get_timer()returns 1000. Obviously, this is incorrect. Instead,get_timer()returns timestamp information in millisecond resolution.
That is not what that sentence means.
PATCH 1/1 README: document the requirements for CONFIG_SYS_HZ
Dear Stephen Warren,
Quoted 9 lines · In message <[email protected]> you wrote:
Quoted 7 lines
README The following options need to be configured: · line 502
Quoted 3 lines
README +2
-0+ The frequency of the timer returned by get_timer(). This value + MUST be 1000.This is misleading, or even incorrect. If I read this, I would expect that
get_timer()returns 1000. Obviously, this is incorrect. Instead,get_timer()returns timestamp information in millisecond resolution.That is not what that sentence means.
Yes, I know. But it can be easily misinterpreted.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I have a theory that it's impossible to prove anything, but I can't prove it.
PATCH 1/1 README: document the requirements for CONFIG_SYS_HZ
Quoted 11 lines · Wolfgang Denk
Dear Stephen Warren,
Quoted 8 lines · In message <[email protected]> you wrote:
Quoted 7 lines
README The following options need to be configured: · line 502
Quoted 3 lines
README +2
-0+ The frequency of the timer returned by get_timer(). This value + MUST be 1000.This is misleading, or even incorrect. If I read this, I would expect that
get_timer()returns 1000. Obviously, this is incorrect. Instead,get_timer()returns timestamp information in millisecond resolution.
Quoted 3 lines
Quoted 1 line
That is not what that sentence means.
Yes, I know. But it can be easily misinterpreted.
How about:
The frequency of the timer returned by get_timer(). get_timer() must operate in milliseconds and this CONFIG option must be set to 1000.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130327/a547d207/attachment.pgp>