Bluetooth: Add support for Foxconn / Hon Hai [0489:e04d] Add support for the AR3012 chip in SONY SVS13129.
PATCH 1/1 Bluetooth: Add support for Foxconn / Hon Hai [0489:e04d] Add support for the AR3012 chip in SONY SVS13129.
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=03 Dev#= 21 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e04d Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by Noguchi Kazutosi <[email protected]>
--- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
@@ -90,6 +90,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3393) }, { USB_DEVICE(0x0489, 0xe04e) }, { USB_DEVICE(0x0489, 0xe056) }, + { USB_DEVICE(0x0489, 0xe04d) },/* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
drivers/bluetooth/btusb.c +1 -0
@@ -148,6 +148,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
Signature · 1 line
1.7.10.4
Hi Noguchi,
Quoted 10 lines · Noguchi Kazutosi
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=03 Dev#= 21 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e04d Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Quoted 5 lines
Signed-off-by Noguchi Kazutosi <[email protected]>--- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+)
Patch has been applied to bluetooth-next. Thanks.
Gustavo