usb: ss: Some fixes and cleanup for USB super-speed support
cover usb: ss: Some fixes and cleanup for USB super-speed support
Based on 'u-boot-usb' master branch.
This patch-series includes majorly some clean-up, few fixes and then some basic super-speed usb infrastructure addition, to help put support for XHCI in near future.
Few patches here have been pulled from patch-series sent long back for XHCI support:
[RFC PATCH 0/2] USB: XHCI: Add xHCI host controller stack driver
We plan to send further the xHCI controller's stack driver in near future.
Vivek Gautam (7):
USB: Some cleanup prior to USB 3.0 interface addition
usb: hub: Conditionally power on usb's root-hub ports
usb: Update device class in usb device's descriptor
usb: hub: Fix enumration timeout
usb: hub: Increase device enumeration timeout for broken drives
USB: SS: Add support for Super Speed USB interface
usb: eth: Fix for updated usb interface descriptor structure
common/cmd_usb.c | 6 +++- common/usb.c | 34 ++++++++++++++++++--------- common/usb_hub.c | 54 +++++++++++++++++++++++++++++++++++-------- common/usb_storage.c | 30 +++++++++++++----------- drivers/usb/eth/asix.c | 14 ++++++----- drivers/usb/eth/smsc95xx.c | 24 +++++++++--------- include/usb.h | 12 +++++++++- include/usb_defs.h | 26 +++++++++++++++++++- 8 files changed, 142 insertions(+), 58 deletions(-)
Signature · 1 line
1.7.6.5
PATCH 1/7 USB: Some cleanup prior to USB 3.0 interface addition
Some cleanup in usb framework, nothing much on feature side.
--- common/usb.c | 18 ++++++++++-------- common/usb_storage.c | 30 ++++++++++++++++-------------- include/usb_defs.h | 2 +- 3 files changed, 27 insertions(+), 23 deletions(-)
common/usb.c +10 -8
@@ -360,6 +360,7 @@ static int usb_parse_config(struct usb_device *dev,int index, ifno, epno, curr_if_num;int i;u16 ep_wMaxPacketSize; +struct usb_interface *if_desc =NULL ; ifno =-1 ; epno =-1 ;
@@ -387,23 +388,24 @@ static int usb_parse_config(struct usb_device *dev, &buffer[index])->bInterfaceNumber != curr_if_num) {/* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; -memcpy (&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep =0 ; - dev->config.if_desc[ifno].num_altsetting =1 ; +memcpy (if_desc, &buffer[index], buffer[index]); + if_desc->no_of_ep =0 ; + if_desc->num_altsetting =1 ; curr_if_num = - dev->config.if_desc[ifno].desc.bInterfaceNumber; + if_desc->desc.bInterfaceNumber; } else {/* found alternate setting for the interface */ - dev->config.if_desc[ifno].num_altsetting++; + if_desc->num_altsetting++; }break ;case USB_DT_ENDPOINT : epno = dev->config.if_desc[ifno].no_of_ep; + if_desc = &dev->config.if_desc[ifno];/* found an endpoint */ - dev->config.if_desc[ifno].no_of_ep++; -memcpy (&dev->config.if_desc[ifno].ep_desc[epno], + if_desc->no_of_ep++; +memcpy (&if_desc->ep_desc[epno], &buffer[index], buffer[index]); ep_wMaxPacketSize =get_unaligned (&dev->config.\ if_desc[ifno].\
common/usb_storage.c +16 -14
@@ -278,10 +278,10 @@ int usb_stor_scan(int mode) lun++) { usb_dev_desc[usb_max_devs].lun = lun;if (usb_stor_get_info (dev, &usb_stor[start], - &usb_dev_desc[usb_max_devs]) ==1 ) { - usb_max_devs++; - } + &usb_dev_desc[usb_max_devs]) ==1 ) + usb_max_devs++; } + }/* if storage device */ if (usb_max_devs ==USB_MAX_STOR_DEV ) {
@@ -511,7 +511,7 @@ static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) dir_in =US_DIRECTION (srb->cmd[0 ]);#ifdef BBB_COMDAT_TRACE -printf ("dir %d lun %d cmdlen %d cmd %p datalen %d pdata %p\n" , +printf ("dir %d lun %d cmdlen %d cmd %p datalen %lu pdata %p\n" , dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen, srb->pdata);if (srb->cmdlen) {
@@ -1218,6 +1218,7 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, {struct usb_interface *iface;int i; +struct usb_endpoint_descriptor *ep_desc;unsigned int flags =0 ;int protocol =0 ;
@@ -1300,24 +1301,25 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,* We will ignore any others. */ for (i =0 ; i < iface->desc.bNumEndpoints; i++) { + ep_desc = &iface->ep_desc[i];/* is it an BULK endpoint? */ -if ((iface->ep_desc[i].bmAttributes & +if ((ep_desc->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) ==USB_ENDPOINT_XFER_BULK ) { -if (iface->ep_desc[i].bEndpointAddress &USB_DIR_IN ) - ss->ep_in = iface->ep_desc[i].bEndpointAddress & -USB_ENDPOINT_NUMBER_MASK ; +if (ep_desc->bEndpointAddress &USB_DIR_IN ) + ss->ep_in = ep_desc->bEndpointAddress & +USB_ENDPOINT_NUMBER_MASK ;else ss->ep_out = - iface->ep_desc[i].bEndpointAddress & + ep_desc->bEndpointAddress &USB_ENDPOINT_NUMBER_MASK ; }/* is it an interrupt endpoint? */ -if ((iface->ep_desc[i].bmAttributes & -USB_ENDPOINT_XFERTYPE_MASK ) ==USB_ENDPOINT_XFER_INT ) { - ss->ep_int = iface->ep_desc[i].bEndpointAddress & -USB_ENDPOINT_NUMBER_MASK ; - ss->irqinterval = iface->ep_desc[i].bInterval; +if ((ep_desc->bmAttributes & +USB_ENDPOINT_XFERTYPE_MASK ) ==USB_ENDPOINT_XFER_INT ) { + ss->ep_int = ep_desc->bEndpointAddress & +USB_ENDPOINT_NUMBER_MASK ; + ss->irqinterval = ep_desc->bInterval; } } USB_STOR_PRINTF("Endpoints In %d Out %d Int %d\n",
include/usb_defs.h +1 -1
@@ -234,7 +234,7 @@#define HUB_CHAR_OCPM 0x0018/* -*Hub Status & Hub Change bit masks +* Hub Status & Hub Change bit masks */ #define HUB_STATUS_LOCAL_POWER 0x0001#define HUB_STATUS_OVERCURRENT 0x0002
Signature · 1 line
1.7.6.5
PATCH 1/7 USB: Some cleanup prior to USB 3.0 interface addition
Dear Vivek Gautam,
Quoted 33 lines
Some cleanup in usb framework, nothing much on feature side.
Signed-off-by Vikas C Sajjan <[email protected]>Signed-off-by Vivek Gautam <[email protected]>--- common/usb.c | 18 ++++++++++-------- common/usb_storage.c | 30 ++++++++++++++++-------------- include/usb_defs.h | 2 +- 3 files changed, 27 insertions(+), 23 deletions(-)common/usb.c +3
-4@@ -360,6 +360,7 @@ static int usb_parse_config(struct usb_device *dev,int index, ifno, epno, curr_if_num;int i;u16 ep_wMaxPacketSize; +struct usb_interface *if_desc =NULL ; ifno =-1 ; epno =-1 ;@@ -387,23 +388,24 @@ static int usb_parse_config(struct usb_device *dev, &buffer[index])->bInterfaceNumber != curr_if_num) {/* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; -memcpy (&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep =0 ; - dev->config.if_desc[ifno].num_altsetting =1 ; +memcpy (if_desc, &buffer[index], buffer[index]);
common/usb.c static int usb_parse_config(struct usb_device *dev, · line 401
Quoted 10 lines
common/usb.c +4
-2+ if_desc->no_of_ep =0 ; + if_desc->num_altsetting =1 ; curr_if_num = - dev- config.if_desc[ifno].desc.bInterfaceNumber; + if_desc->desc.bInterfaceNumber; }else {/* found alternate setting for the interface */ - dev->config.if_desc[ifno].num_altsetting++; + if_desc->num_altsetting++;
This will crash as if_desc is set in the if() branch above and it will be NULL in the else{} branch.
Quoted 18 lines
common/usb.c +3
-2}break ;case USB_DT_ENDPOINT : epno = dev->config.if_desc[ifno].no_of_ep; + if_desc = &dev->config.if_desc[ifno];/* found an endpoint */ - dev->config.if_desc[ifno].no_of_ep++; -memcpy (&dev->config.if_desc[ifno].ep_desc[epno], + if_desc->no_of_ep++; +memcpy (&if_desc->ep_desc[epno], &buffer[index], buffer[index]); ep_wMaxPacketSize = get_unaligned(&dev->config.\common/usb.c +0
-0if_desc[ifno].\common/usb_storage.c +0
-0
common/usb_storage.c int usb_stor_scan(int mode) · line 281
Quoted 4 lines
common/usb_storage.c +0
-1@@ -278,10 +278,10 @@ int usb_stor_scan(int mode) lun++) { usb_dev_desc[usb_max_devs].lun = lun; if (usb_stor_get_info(dev, &usb_stor[start], -
&usb_dev_desc[usb_max_devs]) == 1) {
common/usb_storage.c int usb_stor_scan(int mode) · line 284
Quoted 6 lines
common/usb_storage.c +3
-2- usb_max_devs++; - } + &usb_dev_desc[usb_max_devs]) == 1) + usb_max_devs++; } +
What is this change here doing?
common/usb_storage.c int usb_stor_scan(int mode) · line 287
Quoted 3 lines
common/usb_storage.c +0
-0}/* if storage device */ if (usb_max_devs ==USB_MAX_STOR_DEV ) {
[..]
Best regards,
Marek Vasut
PATCH 1/7 USB: Some cleanup prior to USB 3.0 interface addition
Hi Marek,
Quoted 40 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 38 lines
Some cleanup in usb framework, nothing much on feature side.
Signed-off-by Vikas C Sajjan <[email protected]>Signed-off-by Vivek Gautam <[email protected]>--- common/usb.c | 18 ++++++++++-------- common/usb_storage.c | 30 ++++++++++++++++-------------- include/usb_defs.h | 2 +- 3 files changed, 27 insertions(+), 23 deletions(-)common/usb.c +5
-5@@ -360,6 +360,7 @@ static int usb_parse_config(struct usb_device *dev,int index, ifno, epno, curr_if_num;int i;u16 ep_wMaxPacketSize; +struct usb_interface *if_desc =NULL ; ifno =-1 ; epno =-1 ;@@ -387,23 +388,24 @@ static int usb_parse_config(struct usb_device *dev, &buffer[index])->bInterfaceNumber != curr_if_num) {/* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; -memcpy (&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep =0 ; - dev->config.if_desc[ifno].num_altsetting =1 ; +memcpy (if_desc, &buffer[index], buffer[index]); + if_desc->no_of_ep =0 ; + if_desc->num_altsetting =1 ; curr_if_num = - dev- config.if_desc[ifno].desc.bInterfaceNumber;
Quoted 8 lines
common/usb.c static int usb_parse_config(struct usb_device *dev, · line 400
Quoted 5 lines
common/usb.c +2
-1+ if_desc->desc.bInterfaceNumber; }else {/* found alternate setting for the interface */ - dev->config.if_desc[ifno].num_altsetting++; + if_desc->num_altsetting++;This will crash as
if_descis set in theif()branch above and it will be NULL in the else{} branch.
True, will add hereif_desc = &dev->config.if_desc[ifno];
One more thing actually i could notice, "ifno = -1" in this else section. Is this what we want it here ?
Quoted 16 lines
Quoted 16 lines
common/usb.c +3
-2}break ;case USB_DT_ENDPOINT : epno = dev->config.if_desc[ifno].no_of_ep; + if_desc = &dev->config.if_desc[ifno];/* found an endpoint */ - dev->config.if_desc[ifno].no_of_ep++; -memcpy (&dev->config.if_desc[ifno].ep_desc[epno], + if_desc->no_of_ep++; +memcpy (&if_desc->ep_desc[epno], &buffer[index], buffer[index]); ep_wMaxPacketSize = get_unaligned(&dev->config.\if_desc[ifno].\common/usb_storage.c +0
-0
Quoted 8 lines
common/usb_storage.c int usb_stor_scan(int mode) · line 281
Quoted 7 lines
common/usb_storage.c +0
-1@@ -278,10 +278,10 @@ int usb_stor_scan(int mode) lun++) { usb_dev_desc[usb_max_devs].lun = lun; if (usb_stor_get_info(dev, &usb_stor[start], -&usb_dev_desc[usb_max_devs]) == 1) {
Do we really need this brace here? We just have one statement under this if.
Quoted 9 lines
common/usb_storage.c int usb_stor_scan(int mode) · line 284
Quoted 6 lines
common/usb_storage.c +3
-2- usb_max_devs++; - } + &usb_dev_desc[usb_max_devs]) == 1) + usb_max_devs++; } +What is this change here doing?
There were these unaligned braces for if part, which we removed.
Quoted 13 lines
common/usb_storage.c int usb_stor_scan(int mode) · line 287
Quoted 4 lines
common/usb_storage.c +0
-0}/* if storage device */ if (usb_max_devs ==USB_MAX_STOR_DEV ) {[..]
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
Thanks & Regards Vivek
PATCH 1/7 USB: Some cleanup prior to USB 3.0 interface addition
Quoted 94 lines · Vivek Gautam
Hi Marek,
Quoted 40 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 38 lines
Some cleanup in usb framework, nothing much on feature side.
Signed-off-by Vikas C Sajjan <[email protected]>Signed-off-by Vivek Gautam <[email protected]>--- common/usb.c | 18 ++++++++++-------- common/usb_storage.c | 30 ++++++++++++++++-------------- include/usb_defs.h | 2 +- 3 files changed, 27 insertions(+), 23 deletions(-)common/usb.c +5
-5@@ -360,6 +360,7 @@ static int usb_parse_config(struct usb_device *dev,int index, ifno, epno, curr_if_num;int i;u16 ep_wMaxPacketSize; +struct usb_interface *if_desc =NULL ; ifno =-1 ; epno =-1 ;@@ -387,23 +388,24 @@ static int usb_parse_config(struct usb_device *dev, &buffer[index])->bInterfaceNumber != curr_if_num) {/* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; -memcpy (&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep =0 ; - dev->config.if_desc[ifno].num_altsetting =1 ; +memcpy (if_desc, &buffer[index], buffer[index]); + if_desc->no_of_ep =0 ; + if_desc->num_altsetting =1 ; curr_if_num = - dev- config.if_desc[ifno].desc.bInterfaceNumber;Quoted 8 lines
common/usb.c static int usb_parse_config(struct usb_device *dev, · line 400
Quoted 5 lines
common/usb.c +2
-1+ if_desc->desc.bInterfaceNumber; }else {/* found alternate setting for the interface */ - dev->config.if_desc[ifno].num_altsetting++; + if_desc->num_altsetting++;This will crash as
if_descis set in theif()branch above and it will be NULL in the else{} branch.True, will add here
if_desc= &dev->config.if_desc[ifno];One more thing actually i could notice, "ifno = -1" in this else section. Is this what we want it here ?
Quoted 16 lines
Quoted 16 lines
common/usb.c +3
-2}break ;case USB_DT_ENDPOINT : epno = dev->config.if_desc[ifno].no_of_ep; + if_desc = &dev->config.if_desc[ifno];/* found an endpoint */ - dev->config.if_desc[ifno].no_of_ep++; -memcpy (&dev->config.if_desc[ifno].ep_desc[epno], + if_desc->no_of_ep++; +memcpy (&if_desc->ep_desc[epno], &buffer[index], buffer[index]); ep_wMaxPacketSize = get_unaligned(&dev->config.\if_desc[ifno].\common/usb_storage.c +0
-0Quoted 8 lines
common/usb_storage.c int usb_stor_scan(int mode) · line 281
Quoted 7 lines
common/usb_storage.c +0
-1@@ -278,10 +278,10 @@ int usb_stor_scan(int mode) lun++) { usb_dev_desc[usb_max_devs].lun = lun; if (usb_stor_get_info(dev, &usb_stor[start], -&usb_dev_desc[usb_max_devs]) == 1) {
Do we really need this brace here? We just have one statement under this if.
Quoted 8 lines
Quoted 6 lines
common/usb_storage.c +3
-2- usb_max_devs++; - } + &usb_dev_desc[usb_max_devs]) == 1) + usb_max_devs++; } +
Quoted 3 lines
Quoted 1 line
What is this change here doing?
There were these unaligned braces for if part, which we removed.
Please ignore above comment. It was meant for change prior to this, above. Will remove this extra line here.
Quoted 20 lines
Quoted 6 lines
common/usb_storage.c int usb_stor_scan(int mode) · line 287
Quoted 5 lines
common/usb_storage.c +0
-0}/* if storage device */ if (usb_max_devs ==USB_MAX_STOR_DEV ) {Quoted 8 lines
[..]
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot--
Thanks & Regards
Vivek
Signature · 2 lines
Thanks & Regards Vivek
PATCH 1/7 USB: Some cleanup prior to USB 3.0 interface addition
In reply to Vivek GautamDear Vivek Gautam,
Quoted 72 lines
Hi Marek,
Quoted 62 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 60 lines
Some cleanup in usb framework, nothing much on feature side.
Signed-off-by Vikas C Sajjan <[email protected]>Signed-off-by Vivek Gautam <[email protected]>---
common/usb.c | 18 ++++++++++-------- common/usb_storage.c | 30 ++++++++++++++++-------------- include/usb_defs.h | 2 +- 3 files changed, 27 insertions(+), 23 deletions(-)common/usb.c +1
-0@@ -360,6 +360,7 @@ static int usb_parse_config(struct usb_device *dev,int index, ifno, epno, curr_if_num;int i;u16 ep_wMaxPacketSize; +struct usb_interface *if_desc =NULL ;ifno = -1; epno = -1;common/usb.c +3
-5@@ -387,23 +388,24 @@ static int usb_parse_config(struct usb_device *dev, &buffer[index])->bInterfaceNumber != curr_if_num) {/* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; -memcpy (&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep =0 ; - dev->config.if_desc[ifno].num_altsetting =1 ; +memcpy (if_desc, &buffer[index], buffer[index]); + if_desc->no_of_ep =0 ; + if_desc->num_altsetting =1 ; curr_if_num = - dev- config.if_desc[ifno].desc.bInterfaceNumber; + if_desc->desc.bInterfaceNumber; } else {/* found alternate setting for the interface */ Quoted 6 lines
Quoted 3 lines
-
dev->config.if_desc[ifno].num_altsetting++; +
if_desc->num_altsetting++;This will crash as
if_descis set in theif()branch above and it will be NULL in the else{} branch.
Quoted 2 lines
True, will add here
if_desc= &dev->config.if_desc[ifno];
Yea ;-)
Quoted 2 lines
One more thing actually i could notice, "ifno = -1" in this else section. Is this what we want it here ?
Maybe I don't see it ?
Quoted 33 lines
Quoted 33 lines
Quoted 33 lines
} break; case USB_DT_ENDPOINT: epno = dev->config.if_desc[ifno].no_of_ep;common/usb.c +3
-2+ if_desc = &dev->config.if_desc[ifno];/* found an endpoint */ - dev->config.if_desc[ifno].no_of_ep++; -memcpy (&dev->config.if_desc[ifno].ep_desc[epno], + if_desc->no_of_ep++; +memcpy (&if_desc->ep_desc[epno], &buffer[index], buffer[index]); ep_wMaxPacketSize =get_unaligned (&dev->config.\ if_desc[ifno].\common/usb_storage.c +0
-0@@ -278,10 +278,10 @@ int usb_stor_scan(int mode) lun++) { usb_dev_desc[usb_max_devs].lun = lun; if (usb_stor_get_info(dev, &usb_stor[start],
Quoted 6 lines
Quoted 3 lines
common/usb_storage.c int usb_stor_scan(int mode) · line 285
Quoted 1 line
common/usb_storage.c +0
-1-&usb_dev_desc[usb_max_devs]) == 1) {
Do we really need this brace here? We just have one statement under this if.
If the condition is multi-line, then we use brace, yes.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
common/usb_storage.c +2
-2- usb_max_devs++; - } + &usb_dev_desc[usb_max_devs]) == 1) + usb_max_devs++;
Quoted 20 lines
Quoted 5 lines
Quoted 3 lines
}+
What is this change here doing?
There were these unaligned braces for if part, which we removed.
Quoted 12 lines
Quoted 3 lines
} /* if storage device */ if (usb_max_devs == USB_MAX_STOR_DEV) {[..]
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Best regards,
Marek Vasut
PATCH 1/7 USB: Some cleanup prior to USB 3.0 interface addition
Quoted 77 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 72 lines
Hi Marek,
Quoted 62 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 60 lines
Some cleanup in usb framework, nothing much on feature side.
Signed-off-by Vikas C Sajjan <[email protected]>Signed-off-by Vivek Gautam <[email protected]>---
common/usb.c | 18 ++++++++++-------- common/usb_storage.c | 30 ++++++++++++++++-------------- include/usb_defs.h | 2 +- 3 files changed, 27 insertions(+), 23 deletions(-)common/usb.c +1
-0@@ -360,6 +360,7 @@ static int usb_parse_config(struct usb_device *dev,int index, ifno, epno, curr_if_num;int i;u16 ep_wMaxPacketSize; +struct usb_interface *if_desc =NULL ;ifno = -1; epno = -1;common/usb.c +3
-5@@ -387,23 +388,24 @@ static int usb_parse_config(struct usb_device *dev, &buffer[index])->bInterfaceNumber != curr_if_num) {/* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; -memcpy (&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep =0 ; - dev->config.if_desc[ifno].num_altsetting =1 ; +memcpy (if_desc, &buffer[index], buffer[index]); + if_desc->no_of_ep =0 ; + if_desc->num_altsetting =1 ; curr_if_num = - dev- config.if_desc[ifno].desc.bInterfaceNumber; + if_desc->desc.bInterfaceNumber; } else {/* found alternate setting for the interface */ Quoted 6 lines
Quoted 3 lines
-
dev->config.if_desc[ifno].num_altsetting++; +
if_desc->num_altsetting++;This will crash as
if_descis set in theif()branch above and it will be NULL in the else{} branch.Quoted 2 lines
True, will add here
if_desc= &dev->config.if_desc[ifno];
Quoted 6 lines
Yea ;-)
Quoted 2 lines
One more thing actually i could notice, "ifno = -1" in this else section. Is this what we want it here ?
Maybe I don't see it ?
ifno is initailized to -1.
Now when descriptor is 'Interface type' (case USB_DT_INTERFACE) ifno is update in if part only as below:
ifno = dev->config.no_of_if;
This would not be reaching else part, right ?
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
} break; case USB_DT_ENDPOINT: epno = dev->config.if_desc[ifno].no_of_ep;common/usb.c +3
-2+ if_desc = &dev->config.if_desc[ifno];/* found an endpoint */ - dev->config.if_desc[ifno].no_of_ep++; -memcpy (&dev->config.if_desc[ifno].ep_desc[epno], + if_desc->no_of_ep++; +memcpy (&if_desc->ep_desc[epno], &buffer[index], buffer[index]); ep_wMaxPacketSize =get_unaligned (&dev->config.\ if_desc[ifno].\common/usb_storage.c +0
-0@@ -278,10 +278,10 @@ int usb_stor_scan(int mode) lun++) { usb_dev_desc[usb_max_devs].lun = lun; if (usb_stor_get_info(dev, &usb_stor[start],
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
common/usb_storage.c int usb_stor_scan(int mode) · line 285
Quoted 1 line
common/usb_storage.c +0
-1-&usb_dev_desc[usb_max_devs]) == 1) {
Do we really need this brace here? We just have one statement under this if.
If the condition is multi-line, then we use brace, yes.
Alright, will amend this. :-)
Quoted 17 lines
Quoted 17 lines
Quoted 11 lines
common/usb_storage.c int usb_stor_scan(int mode) · line 284
Quoted 9 lines
common/usb_storage.c +3
-2- usb_max_devs++; - } + &usb_dev_desc[usb_max_devs]) == 1) + usb_max_devs++; } +What is this change here doing?
There were these unaligned braces for if part, which we removed.
Quoted 3 lines
Quoted 3 lines
} /* if storage device */ if (usb_max_devs == USB_MAX_STOR_DEV) {
[..]
Signature · 2 lines
Thanks & Regards Vivek
PATCH 1/7 USB: Some cleanup prior to USB 3.0 interface addition
Dear Vivek Gautam,
Quoted 86 lines · Marek Vasut
Quoted 85 lines
Dear Vivek Gautam,
Quoted 70 lines
Hi Marek,
Quoted 67 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 65 lines
Some cleanup in usb framework, nothing much on feature side.
Signed-off-by Vikas C Sajjan <[email protected]>Signed-off-by Vivek Gautam <[email protected]>---
common/usb.c | 18 ++++++++++-------- common/usb_storage.c | 30 ++++++++++++++++-------------- include/usb_defs.h | 2 +- 3 files changed, 27 insertions(+), 23 deletions(-)common/usb.c +1
-0@@ -360,6 +360,7 @@ static int usb_parse_config(struct usb_device *dev, int index, ifno, epno, curr_if_num;int i;u16 ep_wMaxPacketSize; +struct usb_interface *if_desc =NULL ;ifno = -1; epno = -1;common/usb.c +1
-4@@ -387,23 +388,24 @@ static int usb_parse_config(struct usb_device *dev, &buffer[index])->bInterfaceNumber != curr_if_num) {/* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; -memcpy (&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep =0 ; -dev->config.if_desc[ifno].num_altsetting = 1; +
memcpy(if_desc, &buffer[index], buffer[index]); +
if_desc->no_of_ep= 0; +if_desc->num_altsetting= 1;
curr_if_num=- dev-
config.if_desc[ifno].desc.bInterfaceNumber;
common/usb.c +1
-1+ if_desc->desc.bInterfaceNumber; }else {/* found alternate setting for the interface */ -dev->config.if_desc[ifno].num_altsetting++; +
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
if_desc->num_altsetting++;
This will crash as
if_descis set in theif()branch above and it will be NULL in the else{} branch.True, will add here
if_desc= &dev->config.if_desc[ifno];Yea ;-)
Quoted 2 lines
One more thing actually i could notice, "ifno = -1" in this else section. Is this what we want it here ?
Quoted 8 lines
Quoted 1 line
Maybe I don't see it ?
ifno is initailized to -1.
Now when descriptor is 'Interface type' (caseUSB_DT_INTERFACE) ifno is update in if part only as below:
ifno =dev->config.no_of_if;This would not be reaching else part, right ?
Ah I see, yep, indexing the array with -1 is no good. You can add a safety-check there , but the -1 should never reach that place indeed.
Best regards,
Marek Vasut
PATCH 1/7 USB: Some cleanup prior to USB 3.0 interface addition
Hi,
Quoted 95 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 93 lines · Marek Vasut
Quoted 80 lines
Dear Vivek Gautam,
Quoted 70 lines
Hi Marek,
Quoted 67 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 65 lines
Some cleanup in usb framework, nothing much on feature side.
Signed-off-by Vikas C Sajjan <[email protected]>Signed-off-by Vivek Gautam <[email protected]>---
common/usb.c | 18 ++++++++++-------- common/usb_storage.c | 30 ++++++++++++++++-------------- include/usb_defs.h | 2 +- 3 files changed, 27 insertions(+), 23 deletions(-)common/usb.c +1
-0@@ -360,6 +360,7 @@ static int usb_parse_config(struct usb_device *dev, int index, ifno, epno, curr_if_num;int i;u16 ep_wMaxPacketSize; +struct usb_interface *if_desc =NULL ;ifno = -1; epno = -1;common/usb.c +1
-4@@ -387,23 +388,24 @@ static int usb_parse_config(struct usb_device *dev, &buffer[index])->bInterfaceNumber != curr_if_num) {/* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; -memcpy (&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep =0 ; -dev->config.if_desc[ifno].num_altsetting = 1; +
memcpy(if_desc, &buffer[index], buffer[index]); +
if_desc->no_of_ep= 0; +if_desc->num_altsetting= 1;
curr_if_num=- dev-
config.if_desc[ifno].desc.bInterfaceNumber;
common/usb.c +1
-1+ if_desc->desc.bInterfaceNumber; }else {/* found alternate setting for the interface */ -dev->config.if_desc[ifno].num_altsetting++; +
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
if_desc->num_altsetting++;
This will crash as
if_descis set in theif()branch above and it will be NULL in the else{} branch.True, will add here
if_desc= &dev->config.if_desc[ifno];Quoted 6 lines
Yea ;-)
Quoted 2 lines
One more thing actually i could notice, "ifno = -1" in this else section. Is this what we want it here ?
Maybe I don't see it ?
ifno is initailized to -1.
Now when descriptor is 'Interface type' (caseUSB_DT_INTERFACE) ifno is update in if part only as below:
ifno =dev->config.no_of_if;
Quoted 5 lines
Quoted 1 line
This would not be reaching else part, right ?
Ah I see, yep, indexing the array with -1 is no good. You can add a safety-check there , but the -1 should never reach that place indeed.
Ok, will amend this as required and update.
Signature · 2 lines
Thanks & Regards Vivek
PATCH 2/7 usb: hub: Conditionally power on usb's root-hub ports
In reply to Vivek GautamPower on root hubs' ports only when they are not yet powered on. Its seen with USB 3.0 ports that they are powered on after a H/W reset, as also reflected in XHCI spec (sec 4.3):
"After a Chip Hardware Reset, HCRST, or commanded to the PLS = RxDetect state, all Root Hub ports shall be in Disconnected state, i.e. the port is powered on (PP = 1)"
--- common/usb_hub.c | 22 +++++++++++++++++++--- 1 files changed, 19 insertions(+), 3 deletions(-)
common/usb_hub.c +19 -3
@@ -111,13 +111,29 @@ static void usb_hub_power_on(struct usb_hub_device *hub)int i;struct usb_device *dev;unsigned pgood_delay = hub->desc.bPwrOn2PwrGood *2 ; + ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); +unsigned short portstatus; +int ret; dev = hub->pusb_dev; -/* Enable power to the ports */ + +/* Enable power to ports whose power is not yet on */ USB_HUB_PRINTF ("enabling power on all ports\n" );for (i =0 ; i < dev->maxchild; i++) { -usb_set_port_feature (dev, i +1 ,USB_PORT_FEAT_POWER ); -USB_HUB_PRINTF ("port %d returns %lX\n" , i +1 , dev->status); + ret =usb_get_port_status (dev, i +1 , portsts); +if (ret <0 ) { +USB_HUB_PRINTF ("port %d: get_port_status failed\n" , + i +1 ); +return ; + } + + portstatus =le16_to_cpu (portsts->wPortStatus); + +if (!(portstatus & (USB_PORT_STAT_POWER <<1 ))) { +usb_set_port_feature (dev, i +1 ,USB_PORT_FEAT_POWER ); +USB_HUB_PRINTF ("port %d returns %lX\n" , i +1 , + dev->status); + } }/* Wait at least 100 msec for power to become stable */
Signature · 1 line
1.7.6.5
PATCH 2/7 usb: hub: Conditionally power on usb's root-hub ports
Dear Vivek Gautam,
Quoted 9 lines
Power on root hubs' ports only when they are not yet powered on. Its seen with USB 3.0 ports that they are powered on after a H/W reset, as also reflected in XHCI spec (sec 4.3):
"After a Chip Hardware Reset, HCRST, or commanded to the PLS = RxDetect state, all Root Hub ports shall be in Disconnected state, i.e. the port is powered on (PP = 1)"Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>
Just wondering if we shouldn't power-cycle all the ports instead -- aka. turn them off and then turn all of them on again.
Best regards,
Marek Vasut
PATCH 2/7 usb: hub: Conditionally power on usb's root-hub ports
Hi Marek,
Adding CC: Amarendra
Quoted 9 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 7 lines
Power on root hubs' ports only when they are not yet powered on. Its seen with USB 3.0 ports that they are powered on after a H/W reset, as also reflected in XHCI spec (sec 4.3):
"After a Chip Hardware Reset, HCRST, or commanded to the PLS = RxDetect state, all Root Hub ports shall be in Disconnected state, i.e. the port is powered on (PP = 1)"
Quoted 5 lines
Quoted 2 lines
Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>Just wondering if we shouldn't power-cycle all the ports instead -- aka. turn them off and then turn all of them on again.
Hmm, seems like a fine idea.
Will it be fine to power-cycle even EHCI ports too ? Or we just check if ports are already powered-up (as in XHCI) we power-cycle them.
Signature · 2 lines
Thanks & Regards Vivek
PATCH 2/7 usb: hub: Conditionally power on usb's root-hub ports
Dear Vivek Gautam,
Quoted 17 lines
Hi Marek,
Adding CC: Amarendra
Quoted 12 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 9 lines
Power on root hubs' ports only when they are not yet powered on. Its seen with USB 3.0 ports that they are powered on after a H/W reset, as also reflected in XHCI spec (sec 4.3):
"After a Chip Hardware Reset, HCRST, or commanded to the PLS = RxDetect state, all Root Hub ports shall be in Disconnected state, i.e. the port is powered on (PP = 1)"Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>
Quoted 7 lines
Quoted 2 lines
Just wondering if we shouldn't power-cycle all the ports instead -- aka. turn them off and then turn all of them on again.
Hmm, seems like a fine idea.
Will it be fine to power-cycle even EHCI ports too ? Or we just check if ports are already powered-up (as in XHCI) we power-cycle them.
EHCI as well, all of them without differentiating the type. Why not , do you see a problem ?
Best regards,
Marek Vasut
PATCH 2/7 usb: hub: Conditionally power on usb's root-hub ports
Hi,
Quoted 22 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 20 lines
Hi Marek,
Adding CC: Amarendra
Quoted 14 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 9 lines
Power on root hubs' ports only when they are not yet powered on. Its seen with USB 3.0 ports that they are powered on after a H/W reset, as also reflected in XHCI spec (sec 4.3):
"After a Chip Hardware Reset, HCRST, or commanded to the PLS = RxDetect state, all Root Hub ports shall be in Disconnected state, i.e. the port is powered on (PP = 1)"Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>Just wondering if we shouldn't power-cycle all the ports instead -- aka. turn them off and then turn all of them on again.
Quoted 7 lines
Quoted 4 lines
Hmm, seems like a fine idea.
Will it be fine to power-cycle even EHCI ports too ? Or we just check if ports are already powered-up (as in XHCI) we power-cycle them.EHCI as well, all of them without differentiating the type. Why not , do you see a problem ?
Not of course, will amend this accordingly.
Signature · 2 lines
Thanks & Regards Vivek
PATCH 2/7 usb: hub: Conditionally power on usb's root-hub ports
Dear Vivek Gautam,
Quoted 30 lines
Hi,
Quoted 27 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 24 lines
Hi Marek,
Adding CC: Amarendra
Quoted 9 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 7 lines
Power on root hubs' ports only when they are not yet powered on. Its seen with USB 3.0 ports that they are powered on after a H/W reset, as also reflected in XHCI spec (sec 4.3):
"After a Chip Hardware Reset, HCRST, or commanded to the PLS = RxDetect state, all Root Hub ports shall be in Disconnected state, i.e. the port is powered on (PP = 1)"Quoted 5 lines
Quoted 2 lines
Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>Just wondering if we shouldn't power-cycle all the ports instead -- aka. turn them off and then turn all of them on again.
Hmm, seems like a fine idea.
Will it be fine to power-cycle even EHCI ports too ? Or we just check if ports are already powered-up (as in XHCI) we power-cycle them.
Quoted 4 lines
Quoted 2 lines
EHCI as well, all of them without differentiating the type. Why not , do you see a problem ?
Not of course, will amend this accordingly.
Sounds great! Thank you!
Best regards,
Marek Vasut
PATCH 3/7 usb: Update device class in usb device's descriptor
In reply to Vivek GautamFetch the device class into usb device's dwcriptors, so that the host controller's driver can use this info to differentiate between HUB and DEVICE.
--- common/usb.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
common/usb.c +5 -0
@@ -888,6 +888,11 @@ int usb_new_device(struct usb_device *dev) dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0; +/* Fetch the device class, driver can use this info +* to differentiate between HUB and DEVICE. +*/ + dev->descriptor.bDeviceClass = desc->bDeviceClass; +/* find the port number we're at */ if (parent) {int j;
Signature · 1 line
1.7.6.5
PATCH 3/7 usb: Update device class in usb device's descriptor
Dear Vivek Gautam,
Quoted 5 lines
Fetch the device class into usb device's dwcriptors, so that the host controller's driver can use this info to differentiate between HUB and DEVICE.
Signed-off-by Amar <[email protected]>
Is this a full name? Otherwise this patch is OK.
Quoted 10 lines
--- common/usb.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)common/usb.c +0
-0@@ -888,6 +888,11 @@ int usb_new_device(struct usb_device *dev)
common/usb.c int usb_new_device(struct usb_device *dev) · line 898
Quoted 10 lines
common/usb.c +5
-0dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0; +/* Fetch the device class, driver can use this info +* to differentiate between HUB and DEVICE. +*/ + dev->descriptor.bDeviceClass = desc->bDeviceClass; +/* find the port number we're at */ if (parent) {int j;
Best regards,
Marek Vasut
PATCH 3/7 usb: Update device class in usb device's descriptor
Quoted 37 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 5 lines
Fetch the device class into usb device's dwcriptors, so that the host controller's driver can use this info to differentiate between HUB and DEVICE.
Signed-off-by Amar <[email protected]>Is this a full name? Otherwise this patch is OK.
Quoted 10 lines
--- common/usb.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)common/usb.c +0
-0@@ -888,6 +888,11 @@ int usb_new_device(struct usb_device *dev)common/usb.c int usb_new_device(struct usb_device *dev) · line 898
Quoted 10 lines
common/usb.c +5
-0dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0; +/* Fetch the device class, driver can use this info +* to differentiate between HUB and DEVICE. +*/ + dev->descriptor.bDeviceClass = desc->bDeviceClass; +/* find the port number we're at */ if (parent) {int j;Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
Thanks & Regards Vivek
PATCH 3/7 usb: Update device class in usb device's descriptor
Dear Vivek Gautam,
Quoted 24 lines
CC AmarendraQuoted 21 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 5 lines
Fetch the device class into usb device's dwcriptors, so that the host controller's driver can use this info to differentiate between HUB and DEVICE.
Signed-off-by Amar <[email protected]>Is this a full name? Otherwise this patch is OK.
Quoted 11 lines
---
common/usb.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)common/usb.c +0
-0@@ -888,6 +888,11 @@ int usb_new_device(struct usb_device *dev)
Quoted 7 lines
Quoted 7 lines
common/usb.c int usb_new_device(struct usb_device *dev) · line 895
Quoted 7 lines
common/usb.c +5
-0dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0; +/* Fetch the device class, driver can use this info +* to differentiate between HUB and DEVICE. +*/ + dev->descriptor.bDeviceClass = desc->bDeviceClass; +
btw this really needs fixing, both the comment and the dangling newline.
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
common/usb.c +0
-0/* find the port number we're at */ if (parent) {int j;Best regards,
Marek Vasut
Best regards,
Marek Vasut
PATCH 3/7 usb: Update device class in usb device's descriptor
Hi,
Quoted 28 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 26 lines
CC AmarendraQuoted 23 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 5 lines
Fetch the device class into usb device's dwcriptors, so that the host controller's driver can use this info to differentiate between HUB and DEVICE.
Signed-off-by Amar <[email protected]>Is this a full name? Otherwise this patch is OK.
Quoted 13 lines
---
common/usb.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)common/usb.c +0
-0@@ -888,6 +888,11 @@ int usb_new_device(struct usb_device *dev) dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0;
Quoted 7 lines
Quoted 5 lines
Quoted 5 lines
common/usb.c int usb_new_device(struct usb_device *dev) · line 895
Quoted 5 lines
common/usb.c +5
-0+/* Fetch the device class, driver can use this info +* to differentiate between HUB and DEVICE. +*/ + dev->descriptor.bDeviceClass = desc->bDeviceClass; +btw this really needs fixing, both the comment and the dangling newline.
Sure, will fix this.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
common/usb.c +0
-0/* find the port number we're at */ if (parent) {int j;
Signature · 2 lines
Thanks & Regards Vivek
PATCH 4/7 usb: hub: Fix enumration timeout
In reply to Vivek GautamPatch b6d7852c increases timeout for enumeration, taking worst case to be 10 sec.get_timer() api returns timestamp in micro-seconds, which is what we are checking in the do-while() loop in usb_hub_configure() (get_timer(start) < CONFIG_SYS_HZ * 10).
This should give us a required check for 10 seconds, and thereby we don't need to add additional mdelay of 100 microseconds in each cycle.
--- common/usb_hub.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
common/usb_hub.c +0 -1
@@ -439,7 +439,6 @@ static int usb_hub_configure(struct usb_device *dev) (portstatus & USB_PORT_STAT_CONNECTION))break ; -mdelay (100 ); }while (get_timer (start) <CONFIG_SYS_HZ *10 );if (ret <0 )
Signature · 1 line
1.7.6.5
PATCH 4/7 usb: hub: Fix enumration timeout
Quoted 20 lines · Vivek Gautam
Patch
b6d7852cincreases timeout for enumeration, taking worst case to be 10 sec.get_timer()api returns timestamp in micro-seconds, which is what we are checking in the do-while() loop inusb_hub_configure()(get_timer(start)<CONFIG_SYS_HZ* 10).
This should give us a required check for 10 seconds, and thereby we don't need to add additional mdelay of 100 microseconds in each cycle.Signed-off-by Vivek Gautam<[email protected]>CC Vipin Kumar<[email protected]>--- common/usb_hub.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)common/usb_hub.c +0
-0
common/usb_hub.c static int usb_hub_configure(struct usb_device *dev) · line 444
Quoted 7 lines
common/usb_hub.c +0
-1@@ -439,7 +439,6 @@ static int usb_hub_configure(struct usb_device *dev) (portstatus& USB_PORT_STAT_CONNECTION))break ; -mdelay (100 ); }while (get_timer (start)<CONFIG_SYS_HZ *10 );if (ret<0 )
With this change, we are continuously reading the uhb status. Although this is also OK, but I feel 100 ms delay is better
Still, there is no harm even if this patch is added. So,
PATCH 4/7 usb: hub: Fix enumration timeout
In reply to Vivek GautamQuoted 8 lines · Vivek Gautam
Patch
b6d7852cincreases timeout for enumeration, taking worst case to be 10 sec.get_timer()api returns timestamp in micro-seconds, which is what we are checking in the do-while() loop inusb_hub_configure()(get_timer(start)<CONFIG_SYS_HZ* 10).
This should give us a required check for 10 seconds, and thereby we don't need to add additional mdelay of 100 microseconds in each cycle.
The wording here is not correct. get_timer operates in milliseconds not microseconds.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130401/ddb88042/attachment.pgp>
PATCH 4/7 usb: hub: Fix enumration timeout
Hi,
Quoted 11 lines · Tom Rini
Quoted 8 lines · Vivek Gautam
Patch
b6d7852cincreases timeout for enumeration, taking worst case to be 10 sec.get_timer()api returns timestamp in micro-seconds, which is what we are checking in the do-while() loop inusb_hub_configure()(get_timer(start)<CONFIG_SYS_HZ* 10).
This should give us a required check for 10 seconds, and thereby we don't need to add additional mdelay of 100 microseconds in each cycle.
Quoted 2 lines
The wording here is not correct.
get_timeroperates in milliseconds not microseconds.
Oops!! Yes of course, my mistake. Thanks
Quoted 9 lines
--
Tom_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
Thanks & Regards Vivek
PATCH 4/7 usb: hub: Fix enumration timeout
Dear Vivek Gautam,
Quoted 13 lines
Hi,
Quoted 10 lines · Tom Rini
Quoted 8 lines · Vivek Gautam
Patch
b6d7852cincreases timeout for enumeration, taking worst case to be 10 sec.get_timer()api returns timestamp in micro-seconds, which is what we are checking in the do-while() loop inusb_hub_configure()(get_timer(start)<CONFIG_SYS_HZ* 10).
This should give us a required check for 10 seconds, and thereby we don't need to add additional mdelay of 100 microseconds in each cycle.
Quoted 4 lines
Quoted 2 lines
The wording here is not correct.
get_timeroperates in milliseconds not microseconds.Oops!! Yes of course, my mistake. Thanks
I have the patches queued in usb/next, you can send me a fix and I'll squash it with what's already in there.
Best regards,
Marek Vasut
PATCH 4/7 usb: hub: Fix enumration timeout
Hi Marek,
Quoted 15 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 13 lines
Hi,
Quoted 10 lines · Tom Rini
Quoted 8 lines · Vivek Gautam
Patch
b6d7852cincreases timeout for enumeration, taking worst case to be 10 sec.get_timer()api returns timestamp in micro-seconds, which is what we are checking in the do-while() loop inusb_hub_configure()(get_timer(start)<CONFIG_SYS_HZ* 10).
This should give us a required check for 10 seconds, and thereby we don't need to add additional mdelay of 100 microseconds in each cycle.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
The wording here is not correct.
get_timeroperates in milliseconds not microseconds.Oops!! Yes of course, my mistake. Thanks
I have the patches queued in usb/next, you can send me a fix and I'll squash it with what's already in there.
Sure, i shall send a fix for this.
Should it be good actually to respin the complete patch-series with the changes you have suggested ??
The patches i could see in the 'next' are the originally posted ones.
Quoted 3 lines
Best regards,
Marek Vasut
Signature · 2 lines
Thanks & Regards Vivek
PATCH 4/7 usb: hub: Fix enumration timeout
Quoted 22 lines · Vivek Gautam
Hi Marek,
Quoted 18 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 16 lines
Hi,
Quoted 12 lines · Tom Rini
Quoted 8 lines · Vivek Gautam
Patch
b6d7852cincreases timeout for enumeration, taking worst case to be 10 sec.get_timer()api returns timestamp in micro-seconds, which is what we are checking in the do-while() loop inusb_hub_configure()(get_timer(start)<CONFIG_SYS_HZ* 10).
This should give us a required check for 10 seconds, and thereby we don't need to add additional mdelay of 100 microseconds in each cycle.The wording here is not correct.
get_timeroperates in milliseconds not microseconds.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Oops!! Yes of course, my mistake. Thanks
I have the patches queued in usb/next, you can send me a fix and I'll squash it with what's already in there.
Sure, i shall send a fix for this.
Should it be good actually to respin the complete patch-series with the changes you have suggested ??
I was out on weekend, so couldn't update the patch-series.
Quoted 11 lines
The patches i could see in the 'next' are the originally posted ones.
Quoted 3 lines
Best regards,
Marek Vasut--
Thanks & Regards
Vivek
Signature · 2 lines
Thanks & Regards Vivek
PATCH 4/7 usb: hub: Fix enumration timeout
Dear Vivek Gautam,
Quoted 1 line
On Tue, Apr 2, 2013 at 11:04 AM, Vivek Gautam <[email protected]>
Quoted 23 lines · wrote:
Quoted 23 lines
Hi Marek,
Quoted 20 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 17 lines
Hi,
Quoted 10 lines · Tom Rini
Quoted 8 lines · Vivek Gautam
Patch
b6d7852cincreases timeout for enumeration, taking worst case to be 10 sec.get_timer()api returns timestamp in micro-seconds, which is what we are checking in the do-while() loop inusb_hub_configure()(get_timer(start)<CONFIG_SYS_HZ* 10).
This should give us a required check for 10 seconds, and thereby we don't need to add additional mdelay of 100 microseconds in each cycle.Quoted 2 lines
The wording here is not correct.
get_timeroperates in milliseconds not microseconds.Oops!! Yes of course, my mistake. Thanks
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
I have the patches queued in usb/next, you can send me a fix and I'll squash it with what's already in there.
Sure, i shall send a fix for this.
Should it be good actually to respin the complete patch-series with the changes you have suggested ??I was out on weekend, so couldn't update the patch-series.
No problem, I'll drop it from next then, please send the whole series.
Thanks!
Best regards,
Marek Vasut
PATCH 5/7 usb: hub: Increase device enumeration timeout for broken drives
In reply to Vivek GautamFew broken usb mass storage devices can take some time to set Current Connect Status (CCS) and Connect Status Change (CSC) in Port status register after an attach.
So increasing some timeout when both CCS and CSC bits are not set.
--- common/usb_hub.c | 21 ++++++++++++++++++--- 1 files changed, 18 insertions(+), 3 deletions(-)
common/usb_hub.c +18 -3
@@ -416,6 +416,7 @@ static int usb_hub_configure(struct usb_device *dev)unsigned short portstatus, portchange;int ret;ulong start =get_timer (0 ); +ulong ts =0 ;/* * Wait for (whichever finishes first)
@@ -436,9 +437,23 @@ static int usb_hub_configure(struct usb_device *dev) portchange =le16_to_cpu (portsts->wPortChange);if ((portchange &USB_PORT_STAT_C_CONNECTION ) == - (portstatus &USB_PORT_STAT_CONNECTION )) -break ; - + (portstatus &USB_PORT_STAT_CONNECTION )) { +/* +* Few brokern pen drives can take some +* time to even report CSC or CCS state after +* an attach. So giving this time lag so that +* the CCS or CSC state can be changed and +* reflected in Port status register. +* XXX: This approach however has a drawback, +* with this we are going to wait for 1 sec +* even for ports on which nothing is connected. +*/ +if (ts ==0 ) + ts =get_timer (0 ); +if ((portchange &USB_PORT_STAT_C_CONNECTION ) || + (get_timer (ts) >CONFIG_SYS_HZ *1 )) +break ; + } }while (get_timer (start) <CONFIG_SYS_HZ *10 );if (ret <0 )
Signature · 1 line
1.7.6.5
PATCH 5/7 usb: hub: Increase device enumeration timeout for broken drives
Dear Vivek Gautam,
Quoted 7 lines
Few broken usb mass storage devices can take some time to set Current Connect Status (CCS) and Connect Status Change (CSC) in Port status register after an attach.
So increasing some timeout when both CCS and CSC bits are not set.Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>
Can we not postpone checking of these CCS and CSC bits for such broken devices? This'd at least allow the "good" devices to be detected quickly and while these are handled, this would give some time for the "bad" ones to do their job too.
Best regards,
Marek Vasut
PATCH 5/7 usb: hub: Increase device enumeration timeout for broken drives
Quoted 20 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 7 lines
Few broken usb mass storage devices can take some time to set Current Connect Status (CCS) and Connect Status Change (CSC) in Port status register after an attach.
So increasing some timeout when both CCS and CSC bits are not set.Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>Can we not postpone checking of these CCS and CSC bits for such broken devices? This'd at least allow the "good" devices to be detected quickly and while these are handled, this would give some time for the "bad" ones to do their job too.
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
Thanks & Regards Vivek
PATCH 5/7 usb: hub: Increase device enumeration timeout for broken drives
In reply to Marek VasutHi Marek,
Quoted 7 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 5 lines
Few broken usb mass storage devices can take some time to set Current Connect Status (CCS) and Connect Status Change (CSC) in Port status register after an attach.
So increasing some timeout when both CCS and CSC bits are not set.
Quoted 6 lines
Quoted 2 lines
Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>Can we not postpone checking of these CCS and CSC bits for such broken devices? This'd at least allow the "good" devices to be detected quickly and while these are handled, this would give some time for the "bad" ones to do their job too.
We are thinking of one approach here.
Iterating over all the ports once, so that we find 'good' ports and 'bad' ports By 'bad' port we mean that either the device connected to it is bad or nothing is connected
to this port.
Once we are done with "usb_hub_port_connect_change()" and other jobs for 'good' ports,
we iterate once again on bad ports.
Not sure how good this approach :-(. Any suggestions ?
Signature · 2 lines
Thanks & Regards Vivek
PATCH 5/7 usb: hub: Increase device enumeration timeout for broken drives
Dear Vivek Gautam,
Quoted 18 lines
Hi Marek,
Quoted 7 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 5 lines
Few broken usb mass storage devices can take some time to set Current Connect Status (CCS) and Connect Status Change (CSC) in Port status register after an attach.
So increasing some timeout when both CCS and CSC bits are not set.Quoted 7 lines
Quoted 2 lines
Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>Can we not postpone checking of these CCS and CSC bits for such broken devices? This'd at least allow the "good" devices to be detected quickly and while these are handled, this would give some time for the "bad" ones to do their job too.
Quoted 9 lines
We are thinking of one approach here.
Iterating over all the ports once, so that we find 'good' ports and 'bad' ports By 'bad' port we mean that either the device connected to it is bad or nothing is connected
to this port.
Once we are done with "usb_hub_port_connect_change()" and other jobs for 'good' ports,
we iterate once again on bad ports.
Not sure how good this approach :-(. Any suggestions ?
That might just work, but I wonder if it's worth it. It's a pity we can't make a list of those as they're not even probed yet :(
Best regards,
Marek Vasut
PATCH 5/7 usb: hub: Increase device enumeration timeout for broken drives
Hi Marek,
Quoted 30 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 18 lines
Hi Marek,
Quoted 7 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 5 lines
Few broken usb mass storage devices can take some time to set Current Connect Status (CCS) and Connect Status Change (CSC) in Port status register after an attach.
So increasing some timeout when both CCS and CSC bits are not set.Quoted 7 lines
Quoted 2 lines
Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>Can we not postpone checking of these CCS and CSC bits for such broken devices? This'd at least allow the "good" devices to be detected quickly and while these are handled, this would give some time for the "bad" ones to do their job too.
Quoted 9 lines
We are thinking of one approach here.
Iterating over all the ports once, so that we find 'good' ports and 'bad' ports By 'bad' port we mean that either the device connected to it is bad or nothing is connected
to this port.
Once we are done with "usb_hub_port_connect_change()" and other jobs for 'good' ports,
we iterate once again on bad ports.
Not sure how good this approach :-(. Any suggestions ?
Quoted 2 lines
That might just work, but I wonder if it's worth it. It's a pity we can't make a list of those as they're not even probed yet :(
True, but at this point of time atleast the CSC and CCS bits tell us about whether something is connected or not. Right ?
So lets make the ports on which nothing is connected 'bad' and probe them later so that if something is connected to these, job can be done.
If you are fine i may drop this patch from this series for now and come back with a solution.
By the time i can update the patch-series.
Signature · 2 lines
Thanks & Regards Vivek
PATCH 5/7 usb: hub: Increase device enumeration timeout for broken drives
Dear Vivek Gautam,
Quoted 42 lines
Hi Marek,
Quoted 30 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 18 lines
Hi Marek,
Quoted 7 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 5 lines
Few broken usb mass storage devices can take some time to set Current Connect Status (CCS) and Connect Status Change (CSC) in Port status register after an attach.
So increasing some timeout when both CCS and CSC bits are not set.Quoted 7 lines
Quoted 2 lines
Signed-off-by Amar <[email protected]>Signed-off-by Vivek Gautam <[email protected]>Can we not postpone checking of these CCS and CSC bits for such broken devices? This'd at least allow the "good" devices to be detected quickly and while these are handled, this would give some time for the "bad" ones to do their job too.
Quoted 9 lines
We are thinking of one approach here.
Iterating over all the ports once, so that we find 'good' ports and 'bad' ports By 'bad' port we mean that either the device connected to it is bad or nothing is connected
to this port.
Once we are done with "usb_hub_port_connect_change()" and other jobs for 'good' ports,
we iterate once again on bad ports.
Not sure how good this approach :-(. Any suggestions ?Quoted 2 lines
That might just work, but I wonder if it's worth it. It's a pity we can't make a list of those as they're not even probed yet :(
True, but at this point of time atleast the CSC and CCS bits tell us about whether something is connected or not. Right ?
So lets make the ports on which nothing is connected 'bad' and probe them later so that if something is connected to these, job can be done.
Quoted 3 lines
If you are fine i may drop this patch from this series for now and come back with a solution.
By the time i can update the patch-series.
Sorry for the late reply again. I think the best way around here would be to make the delay configurable, possibly as an argument to "usb reset" with some reasonable default value, what do you think?
Best regards,
Marek Vasut
PATCH 6/7 USB: SS: Add support for Super Speed USB interface
In reply to Vivek GautamThis adds usb framework support for super-speed usb, which will further facilitate to add stack support for xHCI.
--- common/cmd_usb.c | 6 ++++-- common/usb.c | 11 ++++++++--- common/usb_hub.c | 10 +++++++--- common/usb_storage.c | 2 +- include/usb.h | 12 +++++++++++- include/usb_defs.h | 24 +++++++++++++++++++++++- 6 files changed, 54 insertions(+), 11 deletions(-)
common/cmd_usb.c +4 -2
@@ -262,7 +262,7 @@ static void usb_display_config(struct usb_device *dev) ifdesc = &config->if_desc[i];usb_display_if_desc (&ifdesc->desc, dev);for (ii =0 ; ii < ifdesc->no_of_ep; ii++) { - epdesc = &ifdesc->ep_desc[ii]; + epdesc = &ifdesc->ep_desc[ii].ep_desc;usb_display_ep_desc (epdesc); } }
@@ -271,7 +271,9 @@ static void usb_display_config(struct usb_device *dev)static inline char *portspeed (int speed) { -if (speed ==USB_SPEED_HIGH ) +if (speed ==USB_SPEED_SUPER ) +return "5 Gb/s" ; +else if (speed ==USB_SPEED_HIGH )return "480 Mb/s" ;else if (speed ==USB_SPEED_LOW )return "1.5 Mb/s" ;
common/usb.c +8 -3
@@ -304,7 +304,7 @@ usb_set_maxpacket_ep(struct usb_device *dev, int if_idx, int ep_idx)struct usb_endpoint_descriptor *ep;u16 ep_wMaxPacketSize; - ep = &dev->config.if_desc[if_idx].ep_desc[ep_idx]; + ep = &dev->config.if_desc[if_idx].ep_desc[ep_idx].ep_desc; b = ep->bEndpointAddress &USB_ENDPOINT_NUMBER_MASK ; ep_wMaxPacketSize =get_unaligned (&ep->wMaxPacketSize);
@@ -410,14 +410,19 @@ static int usb_parse_config(struct usb_device *dev, ep_wMaxPacketSize =get_unaligned (&dev->config.\ if_desc[ifno].\ ep_desc[epno].\ - wMaxPacketSize); + ep_desc.wMaxPacketSize);put_unaligned (le16_to_cpu (ep_wMaxPacketSize), &dev->config.\ if_desc[ifno].\ ep_desc[epno].\ - wMaxPacketSize); + ep_desc.wMaxPacketSize);USB_PRINTF ("if %d, ep %d\n" , ifno, epno);break ; +case USB_DT_SS_ENDPOINT_COMP : + if_desc = &dev->config.if_desc[ifno]; +memcpy (&(if_desc->ep_desc[epno].ss_ep_comp), + &buffer[index], buffer[index]); +break ;default :if (head->bLength ==0 )return 1 ;
common/usb_hub.c +7 -3
@@ -158,7 +158,9 @@ static struct usb_hub_device *usb_hub_allocate(void)static inline char *portspeed (int portstatus) { -if (portstatus & (1 <<USB_PORT_FEAT_HIGHSPEED )) +if (portstatus & (1 <<USB_PORT_FEAT_SUPERSPEED )) +return "5 Gb/s" ; +else if (portstatus & (1 <<USB_PORT_FEAT_HIGHSPEED ))return "480 Mb/s" ;else if (portstatus & (1 <<USB_PORT_FEAT_LOWSPEED ))return "1.5 Mb/s" ;
@@ -262,7 +264,9 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)/* Allocate a new device struct for it */ usb =usb_alloc_new_device (dev->controller); -if (portstatus &USB_PORT_STAT_HIGH_SPEED ) +if (portstatus &USB_PORT_STAT_SUPER_SPEED ) + usb->speed =USB_SPEED_SUPER ; +else if (portstatus &USB_PORT_STAT_HIGH_SPEED ) usb->speed =USB_SPEED_HIGH ;else if (portstatus &USB_PORT_STAT_LOW_SPEED ) usb->speed =USB_SPEED_LOW ;
@@ -525,7 +529,7 @@ int usb_hub_probe(struct usb_device *dev, int ifnum)/* Multiple endpoints? What kind of mutant ninja-hub is this? */ if (iface->desc.bNumEndpoints !=1 )return 0 ; - ep = &iface->ep_desc[0 ]; + ep = &iface->ep_desc[0 ].ep_desc;/* Output endpoint? Curiousier and curiousier.. */ if (!(ep->bEndpointAddress &USB_DIR_IN ))return 0 ;
common/usb_storage.c +1 -1
@@ -1301,7 +1301,7 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,* We will ignore any others. */ for (i =0 ; i < iface->desc.bNumEndpoints; i++) { - ep_desc = &iface->ep_desc[i]; + ep_desc = &iface->ep_desc[i].ep_desc;/* is it an BULK endpoint? */ if ((ep_desc->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) ==USB_ENDPOINT_XFER_BULK ) {
include/usb.h +11 -1
@@ -67,6 +67,16 @@ struct devrequest {unsigned short length; } __attribute__ ((packed)); +struct usb_ep_desc { +struct usb_endpoint_descriptor ep_desc; +/* +* Super Speed Device will have Super Speed Endpoint +* Companion Descriptor (section 9.6.7 of usb 3.0 spec) +* Revision 1.0 June 6th 2011 +*/ +struct usb_ss_ep_comp_descriptor ss_ep_comp; +}; +/* Interface */ struct usb_interface {struct usb_interface_descriptor desc;
@@ -75,7 +85,7 @@ struct usb_interface {unsigned char num_altsetting;unsigned char act_altsetting; -struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS ]; +struct usb_ep_desc ep_desc[USB_MAXENDPOINTS ]; } __attribute__ ((packed));/* Configuration information.. */
include/usb_defs.h +23 -1
@@ -203,6 +203,8 @@#define USB_PORT_FEAT_POWER 8#define USB_PORT_FEAT_LOWSPEED 9#define USB_PORT_FEAT_HIGHSPEED 10 +#define USB_PORT_FEAT_FULLSPEED 11 +#define USB_PORT_FEAT_SUPERSPEED 12#define USB_PORT_FEAT_C_CONNECTION 16#define USB_PORT_FEAT_C_ENABLE 17#define USB_PORT_FEAT_C_SUSPEND 18
@@ -218,8 +220,20 @@#define USB_PORT_STAT_POWER 0x0100#define USB_PORT_STAT_LOW_SPEED 0x0200#define USB_PORT_STAT_HIGH_SPEED 0x0400/* support for EHCI */ +#define USB_PORT_STAT_FULL_SPEED 0x0800 +#define USB_PORT_STAT_SUPER_SPEED 0x1000/* support for XHCI */ #define USB_PORT_STAT_SPEED \ - (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) + (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED | \ + USB_PORT_STAT_FULL_SPEED | USB_PORT_STAT_SUPER_SPEED) + +/* +* Additions to wPortStatus bit field from USB 3.0 +* See USB 3.0 spec Table 10-10 +*/ +#define USB_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_PORT_STAT_SPEED_5GBPS 0x0000/* wPortChange bits */ #define USB_PORT_STAT_C_CONNECTION 0x0001
@@ -228,6 +242,14 @@#define USB_PORT_STAT_C_OVERCURRENT 0x0008#define USB_PORT_STAT_C_RESET 0x0010 +/* +* Addition to wPortChange bit fields form USB 3.0 +* See USB 3.0 spec Table 10-11 +*/ +#define USB_PORT_STAT_C_BH_RESET 0x0020 +#define USB_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 +/* wHubCharacteristics (masks) */ #define HUB_CHAR_LPSM 0x0003#define HUB_CHAR_COMPOUND 0x0004
Signature · 1 line
1.7.6.5
PATCH 6/7 USB: SS: Add support for Super Speed USB interface
Dear Vivek Gautam,
Quoted 5 lines
This adds usb framework support for super-speed usb, which will further facilitate to add stack support for xHCI.
Signed-off-by Vikas C Sajjan <[email protected]>Signed-off-by Vivek Gautam <[email protected]>
[...]
Quoted 20 lines
include/usb.h +10
-0@@ -67,6 +67,16 @@ struct devrequest {unsigned short length; } __attribute__ ((packed)); +struct usb_ep_desc { +struct usb_endpoint_descriptor ep_desc; +/* +* Super Speed Device will have Super Speed Endpoint +* Companion Descriptor (section 9.6.7 of usb 3.0 spec) +* Revision 1.0 June 6th 2011 +*/ +struct usb_ss_ep_comp_descriptor ss_ep_comp; +}; +/* Interface */ struct usb_interface {struct usb_interface_descriptor desc;
include/usb.h struct usb_interface { · line 88
Quoted 5 lines
include/usb.h +1
-1@@ -75,7 +85,7 @@ struct usb_interface {unsigned char num_altsetting;unsigned char act_altsetting; -struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS ]; +struct usb_ep_desc ep_desc[USB_MAXENDPOINTS ];
Do we really need this struct usb_ep_desc? Can we not just store the usb_ss_ep_comp_descriptor here as well?
Quoted 53 lines
include/usb.h +0
-0} __attribute__ ((packed));/* Configuration information.. */ include/usb_defs.h +23
-1@@ -203,6 +203,8 @@#define USB_PORT_FEAT_POWER 8#define USB_PORT_FEAT_LOWSPEED 9#define USB_PORT_FEAT_HIGHSPEED 10 +#define USB_PORT_FEAT_FULLSPEED 11 +#define USB_PORT_FEAT_SUPERSPEED 12#define USB_PORT_FEAT_C_CONNECTION 16#define USB_PORT_FEAT_C_ENABLE 17#define USB_PORT_FEAT_C_SUSPEND 18@@ -218,8 +220,20 @@#define USB_PORT_STAT_POWER 0x0100#define USB_PORT_STAT_LOW_SPEED 0x0200#define USB_PORT_STAT_HIGH_SPEED 0x0400/* support for EHCI */ +#define USB_PORT_STAT_FULL_SPEED 0x0800 +#define USB_PORT_STAT_SUPER_SPEED 0x1000/* support for XHCI */ #define USB_PORT_STAT_SPEED \ - (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) + (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED | \ + USB_PORT_STAT_FULL_SPEED | USB_PORT_STAT_SUPER_SPEED) + +/* +* Additions to wPortStatus bit field from USB 3.0 +* See USB 3.0 spec Table 10-10 +*/ +#define USB_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_PORT_STAT_SPEED_5GBPS 0x0000/* wPortChange bits */ #define USB_PORT_STAT_C_CONNECTION 0x0001@@ -228,6 +242,14 @@#define USB_PORT_STAT_C_OVERCURRENT 0x0008#define USB_PORT_STAT_C_RESET 0x0010 +/* +* Addition to wPortChange bit fields form USB 3.0 +* See USB 3.0 spec Table 10-11 +*/ +#define USB_PORT_STAT_C_BH_RESET 0x0020 +#define USB_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 +/* wHubCharacteristics (masks) */ #define HUB_CHAR_LPSM 0x0003#define HUB_CHAR_COMPOUND 0x0004
PATCH 6/7 USB: SS: Add support for Super Speed USB interface
Hi Marek,
Quoted 33 lines · Marek Vasut
Dear Vivek Gautam,
Quoted 5 lines
This adds usb framework support for super-speed usb, which will further facilitate to add stack support for xHCI.
Signed-off-by Vikas C Sajjan <[email protected]>Signed-off-by Vivek Gautam <[email protected]>[...]
Quoted 23 lines
include/usb.h +10
-0@@ -67,6 +67,16 @@ struct devrequest {unsigned short length; } __attribute__ ((packed)); +struct usb_ep_desc { +struct usb_endpoint_descriptor ep_desc; +/* +* Super Speed Device will have Super Speed Endpoint +* Companion Descriptor (section 9.6.7 of usb 3.0 spec) +* Revision 1.0 June 6th 2011 +*/ +struct usb_ss_ep_comp_descriptor ss_ep_comp; +}; +/* Interface */ struct usb_interface {struct usb_interface_descriptor desc;@@ -75,7 +85,7 @@ struct usb_interface {unsigned char num_altsetting;unsigned char act_altsetting;
Quoted 5 lines
include/usb.h struct usb_interface { · line 88
Quoted 2 lines
include/usb.h +1
-1-struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS ]; +struct usb_ep_desc ep_desc[USB_MAXENDPOINTS ];Do we really need this struct
usb_ep_desc? Can we not just store theusb_ss_ep_comp_descriptorhere as well?
Yea, possibly we can add "usb_ss_ep_comp_descriptor" in 'usb_interface' itself only.
Also quoting USB 3.0 specs:
"SuperSpeed devices shall return Endpoint Companion descriptors for each of the endpoints in that interface to return additional information about its endpoint
capabilities. The Endpoint Companion descriptor shall immediately follow the endpoint descriptor
it is associated with in the configuration information."
Will update this accordingly.
Quoted 54 lines
Quoted 54 lines
include/usb.h +0
-0} __attribute__ ((packed));/* Configuration information.. */ include/usb_defs.h +23
-1@@ -203,6 +203,8 @@#define USB_PORT_FEAT_POWER 8#define USB_PORT_FEAT_LOWSPEED 9#define USB_PORT_FEAT_HIGHSPEED 10 +#define USB_PORT_FEAT_FULLSPEED 11 +#define USB_PORT_FEAT_SUPERSPEED 12#define USB_PORT_FEAT_C_CONNECTION 16#define USB_PORT_FEAT_C_ENABLE 17#define USB_PORT_FEAT_C_SUSPEND 18@@ -218,8 +220,20 @@#define USB_PORT_STAT_POWER 0x0100#define USB_PORT_STAT_LOW_SPEED 0x0200#define USB_PORT_STAT_HIGH_SPEED 0x0400/* support for EHCI */ +#define USB_PORT_STAT_FULL_SPEED 0x0800 +#define USB_PORT_STAT_SUPER_SPEED 0x1000/* support for XHCI */ #define USB_PORT_STAT_SPEED \ - (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) + (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED | \ + USB_PORT_STAT_FULL_SPEED | USB_PORT_STAT_SUPER_SPEED) + +/* +* Additions to wPortStatus bit field from USB 3.0 +* See USB 3.0 spec Table 10-10 +*/ +#define USB_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_PORT_STAT_SPEED_5GBPS 0x0000/* wPortChange bits */ #define USB_PORT_STAT_C_CONNECTION 0x0001@@ -228,6 +242,14 @@#define USB_PORT_STAT_C_OVERCURRENT 0x0008#define USB_PORT_STAT_C_RESET 0x0010 +/* +* Addition to wPortChange bit fields form USB 3.0 +* See USB 3.0 spec Table 10-11 +*/ +#define USB_PORT_STAT_C_BH_RESET 0x0020 +#define USB_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 +/* wHubCharacteristics (masks) */ #define HUB_CHAR_LPSM 0x0003#define HUB_CHAR_COMPOUND 0x0004
Signature · 2 lines
Thanks & Regards Vivek
PATCH 7/7 usb: eth: Fix for updated usb interface descriptor structure
In reply to Vivek GautamNow usb interface structure doesn't contain the Ep descriptor directly, in fact it contains a pointer to 'usb_ep_desc' structure which contains the Ep descriptor.
So updating the usb-eth drivers accordingly.
--- drivers/usb/eth/asix.c | 14 ++++++++------ drivers/usb/eth/smsc95xx.c | 24 ++++++++++++------------ 2 files changed, 20 insertions(+), 18 deletions(-)
drivers/usb/eth/asix.c +8 -6
@@ -611,6 +611,7 @@ int asix_eth_probe(struct usb_device *dev, unsigned int ifnum, {struct usb_interface *iface;struct usb_interface_descriptor *iface_desc; +struct usb_endpoint_descriptor *ep_desc;int ep_in_found =0 , ep_out_found =0 ;int i;
@@ -652,10 +653,11 @@ int asix_eth_probe(struct usb_device *dev, unsigned int ifnum,* int. We will ignore any others. */ for (i =0 ; i < iface_desc->bNumEndpoints; i++) { + ep_desc = &iface->ep_desc[i].ep_desc;/* is it an BULK endpoint? */ -if ((iface->ep_desc[i].bmAttributes & +if ((ep_desc->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) ==USB_ENDPOINT_XFER_BULK ) { -u8 ep_addr = iface->ep_desc[i].bEndpointAddress; +u8 ep_addr = ep_desc->bEndpointAddress;if (ep_addr &USB_DIR_IN ) {if (!ep_in_found) { ss->ep_in = ep_addr &
@@ -672,11 +674,11 @@ int asix_eth_probe(struct usb_device *dev, unsigned int ifnum, }/* is it an interrupt endpoint? */ -if ((iface->ep_desc[i].bmAttributes & +if ((ep_desc->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) ==USB_ENDPOINT_XFER_INT ) { - ss->ep_int = iface->ep_desc[i].bEndpointAddress & -USB_ENDPOINT_NUMBER_MASK ; - ss->irqinterval = iface->ep_desc[i].bInterval; + ss->ep_int = ep_desc->bEndpointAddress & +USB_ENDPOINT_NUMBER_MASK ; + ss->irqinterval = ep_desc->bInterval; } } debug("Endpoints In %d Out %d Int %d\n",
drivers/usb/eth/smsc95xx.c +12 -12
@@ -807,6 +807,7 @@ int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum, {struct usb_interface *iface;struct usb_interface_descriptor *iface_desc; +struct usb_endpoint_descriptor *ep_desc;int i;/* let's examine the device now */
@@ -837,25 +838,24 @@ int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum,* We will ignore any others. */ for (i =0 ; i < iface_desc->bNumEndpoints; i++) { + ep_desc = &iface->ep_desc[i].ep_desc;/* is it an BULK endpoint? */ -if ((iface->ep_desc[i].bmAttributes & +if ((ep_desc->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) ==USB_ENDPOINT_XFER_BULK ) { -if (iface->ep_desc[i].bEndpointAddress &USB_DIR_IN ) - ss->ep_in = - iface->ep_desc[i].bEndpointAddress & -USB_ENDPOINT_NUMBER_MASK ; +if (ep_desc->bEndpointAddress &USB_DIR_IN ) + ss->ep_in = ep_desc->bEndpointAddress & +USB_ENDPOINT_NUMBER_MASK ;else - ss->ep_out = - iface->ep_desc[i].bEndpointAddress & -USB_ENDPOINT_NUMBER_MASK ; + ss->ep_out = ep_desc->bEndpointAddress & +USB_ENDPOINT_NUMBER_MASK ; }/* is it an interrupt endpoint? */ -if ((iface->ep_desc[i].bmAttributes & +if ((ep_desc->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) ==USB_ENDPOINT_XFER_INT ) { - ss->ep_int = iface->ep_desc[i].bEndpointAddress & -USB_ENDPOINT_NUMBER_MASK ; - ss->irqinterval = iface->ep_desc[i].bInterval; + ss->ep_int = ep_desc->bEndpointAddress & +USB_ENDPOINT_NUMBER_MASK ; + ss->irqinterval = ep_desc->bInterval; } } debug("Endpoints In %d Out %d Int %d\n",
Signature · 1 line
1.7.6.5