Renesas ARM SoC updates for v3.10 #2
Subsystems (6)
Hi Arnd, Hi Olof,
The following changes since commit 4c82e452732784419fd616cf1acf2bc9b004aae1:
Merge tag 'renesas-intc-external-irq2-for-v3.10' into soc-base (2013-04-02 10:55:57 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc2-for-v3.10
for you to fetch changes up to 8585deb18580d04209a2986430aa0959ef38fce2:
ARM: shmobile: r8a7790 SoC 64-bit DT support (2013-04-02 11:02:21 +0900)
----------------------------------------------------------------
Second round of Renesas ARM SoC updates for v3.10
Some Highlights:
* Add r8a7790 SoC
* Add r8a73a4 SoC
* Migrate r8a7740 SoC from INTC to GIC
* Add thermal driver support to r8a73a4 SoC
* Add irqpin DT nodes to sh73a0 SoC
* Add SCIF support to r8a7778 SoC
This pull request is based on a merge of:git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-soc-for-v3.10git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-intc-external-irq2-for-v3.10
----------------------------------------------------------------
Bastian Hecht (1):
ARM: shmobile: r8a7740: Migrate from INTC to GIC
Guennadi Liakhovetski (3):
ARM: shmobile: sh73a0: wait for completion when kicking the clock
ARM: shmobile: sh73a0: add irqpin DT nodes
ARM: shmobile: sh73a0: add a TWD clock
Kuninori Morimoto (15):
ARM: shmobile: add R8A7778 basis support
ARM: shmobile: r8a7778 SCIF support
ARM: shmobile: r8a73a4: add thermal driver support
ARM: shmobile: sh73a0: remove DIV4_ZT* clocks
ARM: shmobile: sh7372: remove DIV4_ZT* clocks
ARM: shmobile: add struct clk_ratio and fixed ratio clock macro
ARM: shmobile: sh7372: use fixed ratio clock
ARM: shmobile: sh73a0: use fixed ratio clock
ARM: shmobile: r8a7740: tidyup comment/implementation mismatch
ARM: shmobile: r8a7740: use fixed ratio clock
ARM: shmobile: r8a7779: remove DIV4 clocks and use fixed ratio clock
ARM: shmobile: sh7372: move global functions to sh7372.h
ARM: shmobile: sh73a0: move global functions to sh73a0.h
ARM: shmobile: r8a7740: move global functions to r8a7740.h
ARM: shmobile: r8a7779: move global functions to r8a7779.h
Magnus Damm (9):
ARM: shmobile: Initial r8a73a4 SoC support V3
ARM: shmobile: r8a73a4 SCIF support V3
ARM: shmobile: r8a73a4 IRQC support V2
ARM: shmobile: r8a73a4 PFC support
ARM: shmobile: Disallow PINCTRL without GPIOLIB
ARM: shmobile: Initial r8a7790 SoC support
ARM: shmobile: r8a7790 SCIF support
ARM: shmobile: r8a7790 IRQC support
ARM: shmobile: r8a7790 PFC support
Takashi YOSHII (2):
ARM: shmobile: r8a73a4 SoC 64-bit DT support
ARM: shmobile: r8a7790 SoC 64-bit DT support
arch/arm/Kconfig | 2 +- arch/arm/boot/dts/r8a73a4.dtsi | 94 ++++ arch/arm/boot/dts/r8a7778.dtsi | 35 ++ arch/arm/boot/dts/r8a7790.dtsi | 63 +++ arch/arm/boot/dts/sh73a0.dtsi | 81 +++ arch/arm/mach-shmobile/Kconfig | 26 + arch/arm/mach-shmobile/Makefile | 3 + arch/arm/mach-shmobile/board-armadillo800eva.c | 35 +- arch/arm/mach-shmobile/clock-r8a73a4.c | 115 +++++ arch/arm/mach-shmobile/clock-r8a7740.c | 114 ++--- arch/arm/mach-shmobile/clock-r8a7778.c | 104 ++++ arch/arm/mach-shmobile/clock-r8a7779.c | 196 ++++---- arch/arm/mach-shmobile/clock-r8a7790.c | 93 ++++ arch/arm/mach-shmobile/clock-sh7372.c | 50 +- arch/arm/mach-shmobile/clock-sh73a0.c | 115 ++--- arch/arm/mach-shmobile/clock.c | 13 + arch/arm/mach-shmobile/include/mach/clock.h | 39 ++ arch/arm/mach-shmobile/include/mach/common.h | 54 -- arch/arm/mach-shmobile/include/mach/r8a73a4.h | 8 + arch/arm/mach-shmobile/include/mach/r8a7740.h | 9 + arch/arm/mach-shmobile/include/mach/r8a7778.h | 28 ++ arch/arm/mach-shmobile/include/mach/r8a7779.h | 13 + arch/arm/mach-shmobile/include/mach/r8a7790.h | 8 + arch/arm/mach-shmobile/include/mach/sh7372.h | 12 + arch/arm/mach-shmobile/include/mach/sh73a0.h | 15 + arch/arm/mach-shmobile/intc-r8a7740.c | 641 ++---------------------- arch/arm/mach-shmobile/setup-r8a73a4.c | 202 ++++++++ arch/arm/mach-shmobile/setup-r8a7740.c | 192 +++++-- arch/arm/mach-shmobile/setup-r8a7778.c | 193 +++++++ arch/arm/mach-shmobile/setup-r8a7790.c | 137 +++++ drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 64 +-- 31 files changed, 1732 insertions(+), 1022 deletions(-) create mode 100644 arch/arm/boot/dts/r8a73a4.dtsi create mode 100644 arch/arm/boot/dts/r8a7778.dtsi create mode 100644 arch/arm/boot/dts/r8a7790.dtsi create mode 100644 arch/arm/mach-shmobile/clock-r8a73a4.c create mode 100644 arch/arm/mach-shmobile/clock-r8a7778.c create mode 100644 arch/arm/mach-shmobile/clock-r8a7790.c create mode 100644 arch/arm/mach-shmobile/include/mach/clock.h create mode 100644 arch/arm/mach-shmobile/include/mach/r8a73a4.h create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7778.h create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7790.h create mode 100644 arch/arm/mach-shmobile/setup-r8a73a4.c create mode 100644 arch/arm/mach-shmobile/setup-r8a7778.c create mode 100644 arch/arm/mach-shmobile/setup-r8a7790.c
PATCH 1/30 ARM: shmobile: Initial r8a73a4 SoC support V3
From: Magnus Damm <[email protected]>
V3 of initial support for the r8a73a4 SoC including:
- Single Cortex-A15 CPU Core
- GIC
- Architecture timer
No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code.
--- arch/arm/boot/dts/r8a73a4.dtsi | 55 +++++++++++++++ arch/arm/mach-shmobile/Kconfig | 7 ++ arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/clock-r8a73a4.c | 91 +++++++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/r8a73a4.h | 7 ++ arch/arm/mach-shmobile/setup-r8a73a4.c | 50 ++++++++++++++ 6 files changed, 211 insertions(+) create mode 100644 arch/arm/boot/dts/r8a73a4.dtsi create mode 100644 arch/arm/mach-shmobile/clock-r8a73a4.c create mode 100644 arch/arm/mach-shmobile/include/mach/r8a73a4.h create mode 100644 arch/arm/mach-shmobile/setup-r8a73a4.c
arch/arm/boot/dts/r8a73a4.dtsi new file +55 -0
@@ -0,0 +1,55 @@ +/* + * Device Tree Source for the r8a73a4 SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,r8a73a4"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1500000000>; + }; + }; + + gic: interrupt-controller at f1001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xf1001000 0x1000>, + <0xf1002000 0x1000>, + <0xf1004000 0x2000>, + <0xf1006000 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif at 4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu0>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; +};
arch/arm/mach-shmobile/Kconfig +7 -0
@@ -18,6 +18,13 @@ config ARCH_SH73A0 select SH_CLK_CPG select RENESAS_INTC_IRQPIN +config ARCH_R8A73A4 + bool "R-Mobile APE6 (R8A73A40)" + select ARM_GIC + select CPU_V7 + select ARM_ARCH_TIMER + select SH_CLK_CPG + config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" select ARCH_WANT_OPTIONAL_GPIOLIB
arch/arm/mach-shmobile/Makefile +1 -0
@@ -8,6 +8,7 @@ obj-y := timer.o console.o clock.o # CPU objects obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o +obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
arch/arm/mach-shmobile/clock-r8a73a4.c new file +91 -0
91 lines not on this page · raw message
arch/arm/mach-shmobile/include/mach/r8a73a4.h new file +7 -0
@@ -0,0 +1,7 @@ +#ifndef __ASM_R8A73A4_H__ +#define __ASM_R8A73A4_H__ + +void r8a73a4_add_standard_devices (void ); +void r8a73a4_clock_init (void ); + +#endif /* __ASM_R8A73A4_H__ */
arch/arm/mach-shmobile/setup-r8a73a4.c new file +50 -0
50 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 2/30 ARM: shmobile: r8a73a4 SCIF support V3
In reply to Simon HormanFrom: Magnus Damm <[email protected]>
V3 of SCIF serial port support for the r8a73a4 SoC. This is done by adding platform devices for SCIFA0 -> SCIFA1 as well as SCIFB0 -> SCIFB3 together with clock bindings. DT device description is excluded at this point since such bindings are still under development.
--- arch/arm/mach-shmobile/clock-r8a73a4.c | 15 ++++++++++- arch/arm/mach-shmobile/setup-r8a73a4.c | 43 ++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 1 deletion(-)
arch/arm/mach-shmobile/clock-r8a73a4.c +14 -1
@@ -28,6 +28,7 @@#define CPG_LEN 0x270#define MPCKCR 0xe6150080 +#define SMSTPCR2 0xe6150138static struct clk_mapping cpg_mapping = { .phys =CPG_BASE ,
@@ -55,11 +56,23 @@ static struct clk *main_clks[] = { &extal2_clk, }; -enum {MSTP_NR }; +enum {MSTP217 ,MSTP216 ,MSTP207 ,MSTP206 ,MSTP204 ,MSTP203 ,MSTP_NR };static struct clk mstp_clks[MSTP_NR ] = { + [MSTP204 ] =SH_CLK_MSTP32 (&extal2_clk,SMSTPCR2 ,4 ,0 ),/* SCIFA0 */ + [MSTP203 ] =SH_CLK_MSTP32 (&extal2_clk,SMSTPCR2 ,3 ,0 ),/* SCIFA1 */ + [MSTP206 ] =SH_CLK_MSTP32 (&extal2_clk,SMSTPCR2 ,6 ,0 ),/* SCIFB0 */ + [MSTP207 ] =SH_CLK_MSTP32 (&extal2_clk,SMSTPCR2 ,7 ,0 ),/* SCIFB1 */ + [MSTP216 ] =SH_CLK_MSTP32 (&extal2_clk,SMSTPCR2 ,16 ,0 ),/* SCIFB2 */ + [MSTP217 ] =SH_CLK_MSTP32 (&extal2_clk,SMSTPCR2 ,17 ,0 ),/* SCIFB3 */ };static struct clk_lookup lookups[] = { +CLKDEV_DEV_ID ("sh-sci.0" , &mstp_clks[MSTP204 ]), +CLKDEV_DEV_ID ("sh-sci.1" , &mstp_clks[MSTP203 ]), +CLKDEV_DEV_ID ("sh-sci.2" , &mstp_clks[MSTP206 ]), +CLKDEV_DEV_ID ("sh-sci.3" , &mstp_clks[MSTP207 ]), +CLKDEV_DEV_ID ("sh-sci.4" , &mstp_clks[MSTP216 ]), +CLKDEV_DEV_ID ("sh-sci.5" , &mstp_clks[MSTP217 ]), };void __init r8a73a4_clock_init (void )
arch/arm/mach-shmobile/setup-r8a73a4.c +43 -0
56 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 3/30 ARM: shmobile: r8a73a4 IRQC support V2
In reply to Simon HormanFrom: Magnus Damm <[email protected]>
Add IRQC interrupt controller support to r8a73a4 by hooking up two IRQC instances to handle 58 external IRQ signals. There IRQC controllers are tied to SPIs of the GIC. On r8a73a4 exact IRQ pin routing is handled by the PFC which is excluded from this patch.
Both platform devices and DT devices are added in this patch. The platform device versions are used to provide a static interrupt map configuration for board code written in C.
--- arch/arm/boot/dts/r8a73a4.dtsi | 32 ++++++++++++ arch/arm/mach-shmobile/Kconfig | 1 + arch/arm/mach-shmobile/setup-r8a73a4.c | 84 ++++++++++++++++++++++++++++++++ 3 files changed, 117 insertions(+)
arch/arm/boot/dts/r8a73a4.dtsi +32 -0
@@ -52,4 +52,36 @@ <1 11 0xf08>, <1 10 0xf08>; }; + + irqc0: interrupt-controller at e61c0000 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe61c0000 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>, + <0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>, + <0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>, + <0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>, + <0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>, + <0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>, + <0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>, + <0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>; + }; + + irqc1: interrupt-controller at e61c0200 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe61c0200 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>, + <0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>, + <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>, + <0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>, + <0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>, + <0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>, + <0 56 4>, <0 57 4>; + }; + };
arch/arm/mach-shmobile/Kconfig +1 -0
@@ -24,6 +24,7 @@ config ARCH_R8A73A4 select CPU_V7 select ARM_ARCH_TIMER select SH_CLK_CPG + select RENESAS_IRQC config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)"
arch/arm/mach-shmobile/setup-r8a73a4.c +84 -0
102 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 4/30 ARM: shmobile: r8a73a4 PFC support
In reply to Simon HormanFrom: Magnus Damm <[email protected]>
Add a platform device for the r8a73a4 PFC.
--- arch/arm/mach-shmobile/Kconfig | 1 + arch/arm/mach-shmobile/include/mach/r8a73a4.h | 1 + arch/arm/mach-shmobile/setup-r8a73a4.c | 10 ++++++++++ 3 files changed, 12 insertions(+)
arch/arm/mach-shmobile/Kconfig +1 -0
@@ -20,6 +20,7 @@ config ARCH_SH73A0 config ARCH_R8A73A4 bool "R-Mobile APE6 (R8A73A40)" + select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 select ARM_ARCH_TIMER
arch/arm/mach-shmobile/include/mach/r8a73a4.h +1 -0
@@ -3,5 +3,6 @@void r8a73a4_add_standard_devices (void );void r8a73a4_clock_init (void ); +void r8a73a4_pinmux_init (void );#endif /* __ASM_R8A73A4_H__ */
arch/arm/mach-shmobile/setup-r8a73a4.c +10 -0
@@ -28,6 +28,16 @@#include <mach/r8a73a4.h> #include <asm/mach/arch.h> +static const struct resource pfc_resources[] = { +DEFINE_RES_MEM (0xe6050000 ,0x9000 ), +}; + +void __init r8a73a4_pinmux_init (void ) +{ +platform_device_register_simple ("pfc-r8a73a4" ,-1 , pfc_resources, +ARRAY_SIZE (pfc_resources)); +} +#define SCIF_COMMON (scif_type, baseaddr, irq) \ .type = scif_type, \ .mapbase = baseaddr, \
Signature · 1 line
1.7.10.4
PATCH 5/30 ARM: shmobile: sh73a0: wait for completion when kicking the clock
In reply to Simon HormanFrom: Guennadi Liakhovetski <[email protected]>
To reconfigure clocks, controlled by FRQCRA and FRQCRB, a kick bit has to be set and to make sure the setting has taken effect, it has to be read back repeatedly until it is cleared by the hardware. This patch adds the waiting part, that was missing until now.
--- arch/arm/mach-shmobile/clock-sh73a0.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)
arch/arm/mach-shmobile/clock-sh73a0.c +17 -6
@@ -21,6 +21,7 @@#include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <asm/processor.h> #include <mach/common.h> #define FRQCRA IOMEM(0xe6150000)
@@ -234,14 +235,24 @@ static struct clk *main_clks[] = { &sh73a0_extalr_clk, }; -static void div4_kick (struct clk *clk) +static int frqcr_kick (void ) { -unsigned long value; +int i; + +/* set KICK bit in FRQCRB to update hardware setting, check success */ +__raw_writel (__raw_readl (FRQCRB ) | (1 <<31 ),FRQCRB ); +for (i =1000 ; i; i--) +if (__raw_readl (FRQCRB ) & (1 <<31 )) +cpu_relax (); +else +return i; + +return -ETIMEDOUT ; +} -/* set KICK bit in FRQCRB to update hardware setting */ - value =__raw_readl (FRQCRB ); - value |= (1 <<31 ); -__raw_writel (value,FRQCRB ); +static void div4_kick (struct clk *clk) +{ +frqcr_kick (); }static int divisors[] = {2 ,3 ,4 ,6 ,8 ,12 ,16 ,18 ,
Signature · 1 line
1.7.10.4
PATCH 6/30 ARM: shmobile: add R8A7778 basis support
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
Add initial support for the R8A7778 R-Car M1A SoC. No static virtual mappings are used, all the components make use of ioremap().DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.
It is based on v1.0 datasheet
--- arch/arm/boot/dts/r8a7778.dtsi | 35 ++++++ arch/arm/mach-shmobile/Kconfig | 6 + arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/clock-r8a7778.c | 91 ++++++++++++++ arch/arm/mach-shmobile/include/mach/r8a7778.h | 28 +++++ arch/arm/mach-shmobile/setup-r8a7778.c | 167 +++++++++++++++++++++++++ 6 files changed, 328 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7778.dtsi create mode 100644 arch/arm/mach-shmobile/clock-r8a7778.c create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7778.h create mode 100644 arch/arm/mach-shmobile/setup-r8a7778.c
arch/arm/boot/dts/r8a7778.dtsi new file +35 -0
@@ -0,0 +1,35 @@ +/* + * Device Tree Source for Renesas r8a7778 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto <[email protected]> + * + * based on r8a7779 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,r8a7778"; + + cpus { + cpu at 0 { + compatible = "arm,cortex-a9"; + }; + }; + + gic: interrupt-controller at fe438000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xfe438000 0x1000>, + <0xfe430000 0x100>; + }; +};
arch/arm/mach-shmobile/Kconfig +6 -0
@@ -33,6 +33,12 @@ config ARCH_R8A7740 select CPU_V7 select SH_CLK_CPG +config ARCH_R8A7778 + bool "R-Car M1 (R8A77780)" + select CPU_V7 + select SH_CLK_CPG + select ARM_GIC + config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" select ARCH_WANT_OPTIONAL_GPIOLIB
arch/arm/mach-shmobile/Makefile +1 -0
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o +obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
arch/arm/mach-shmobile/clock-r8a7778.c new file +91 -0
91 lines not on this page · raw message
arch/arm/mach-shmobile/include/mach/r8a7778.h new file +28 -0
@@ -0,0 +1,28 @@ +/* +* Copyright (C) 2013 Renesas Solutions Corp. +* Copyright (C) 2013 Kuninori Morimoto <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; version 2 of the License. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ +#ifndef __ASM_R8A7778_H__ +#define __ASM_R8A7778_H__ + +extern void r8a7778_add_standard_devices (void ); +extern void r8a7778_add_standard_devices_dt (void ); +extern void r8a7778_init_delay (void ); +extern void r8a7778_init_irq (void ); +extern void r8a7778_init_irq_dt (void ); +extern void r8a7778_clock_init (void ); + +#endif /* __ASM_R8A7778_H__ */
arch/arm/mach-shmobile/setup-r8a7778.c new file +167 -0
167 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 7/30 ARM: shmobile: r8a7778 SCIF support
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
Add SCIF serial port support to the r8a7778 SoC by adding platform devices together with clock bindings. DT device description is excluded at this point since such bindings are still under development.
--- arch/arm/mach-shmobile/clock-r8a7778.c | 13 +++++++++++++ arch/arm/mach-shmobile/setup-r8a7778.c | 26 ++++++++++++++++++++++++++ 2 files changed, 39 insertions(+)
arch/arm/mach-shmobile/clock-r8a7778.c +13 -0
@@ -58,16 +58,29 @@ static struct clk *main_clks[] = { };enum { +MSTP026 ,MSTP025 ,MSTP024 ,MSTP023 ,MSTP022 ,MSTP021 ,MSTP016 ,MSTP015 ,MSTP_NR };static struct clk mstp_clks[MSTP_NR ] = { + [MSTP026 ] =SH_CLK_MSTP32 (&clkp,MSTPCR0 ,26 ,0 ),/* SCIF0 */ + [MSTP025 ] =SH_CLK_MSTP32 (&clkp,MSTPCR0 ,25 ,0 ),/* SCIF1 */ + [MSTP024 ] =SH_CLK_MSTP32 (&clkp,MSTPCR0 ,24 ,0 ),/* SCIF2 */ + [MSTP023 ] =SH_CLK_MSTP32 (&clkp,MSTPCR0 ,23 ,0 ),/* SCIF3 */ + [MSTP022 ] =SH_CLK_MSTP32 (&clkp,MSTPCR0 ,22 ,0 ),/* SCIF4 */ + [MSTP021 ] =SH_CLK_MSTP32 (&clkp,MSTPCR0 ,21 ,0 ),/* SCIF5 */ [MSTP016 ] =SH_CLK_MSTP32 (&clkp,MSTPCR0 ,16 ,0 ),/* TMU0 */ [MSTP015 ] =SH_CLK_MSTP32 (&clkp,MSTPCR0 ,15 ,0 ),/* TMU1 */ };static struct clk_lookup lookups[] = {/* MSTP32 clocks */ +CLKDEV_DEV_ID ("sh-sci.0" , &mstp_clks[MSTP026 ]),/* SCIF0 */ +CLKDEV_DEV_ID ("sh-sci.1" , &mstp_clks[MSTP025 ]),/* SCIF1 */ +CLKDEV_DEV_ID ("sh-sci.2" , &mstp_clks[MSTP024 ]),/* SCIF2 */ +CLKDEV_DEV_ID ("sh-sci.3" , &mstp_clks[MSTP023 ]),/* SCIF3 */ +CLKDEV_DEV_ID ("sh-sci.4" , &mstp_clks[MSTP022 ]),/* SCIF4 */ +CLKDEV_DEV_ID ("sh-sci.5" , &mstp_clks[MSTP021 ]),/* SCIF6 */ CLKDEV_DEV_ID ("sh_tmu.0" , &mstp_clks[MSTP016 ]),/* TMU00 */ CLKDEV_DEV_ID ("sh_tmu.1" , &mstp_clks[MSTP015 ]),/* TMU01 */ };
arch/arm/mach-shmobile/setup-r8a7778.c +26 -0
@@ -25,6 +25,7 @@#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/irqchip.h> +#include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <mach/irqs.h> #include <mach/r8a7778.h>
@@ -32,6 +33,26 @@#include <asm/mach/arch.h> #include <asm/hardware/cache-l2x0.h> +/* SCIF */ +#define SCIF_INFO (baseaddr, irq) \ +{ \ + .mapbase = baseaddr, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \ + .scbrr_algo_id = SCBRR_ALGO_2, \ + .type = PORT_SCIF, \ + .irqs = SCIx_IRQ_MUXED(irq), \ +} + +static struct plat_sci_port scif_platform_data[] = { +SCIF_INFO (0xffe40000 ,gic_iid (0x66 )), +SCIF_INFO (0xffe41000 ,gic_iid (0x67 )), +SCIF_INFO (0xffe42000 ,gic_iid (0x68 )), +SCIF_INFO (0xffe43000 ,gic_iid (0x69 )), +SCIF_INFO (0xffe44000 ,gic_iid (0x6a )), +SCIF_INFO (0xffe45000 ,gic_iid (0x6b )), +}; +/* TMU */ static struct resource sh_tmu0_resources[] = {DEFINE_RES_MEM (0xffd80008 ,12 ),
@@ -88,6 +109,11 @@ void __init r8a7778_add_standard_devices(void) }#endif +for (i =0 ; i <ARRAY_SIZE (scif_platform_data); i++) +platform_device_register_data (&platform_bus,"sh-sci" , i, + &scif_platform_data[i], +sizeof (struct plat_sci_port )); +for (i =0 ; i <ARRAY_SIZE (platform_devinfo); i++)platform_device_register_full (&platform_devinfo[i]); }
Signature · 1 line
1.7.10.4
PATCH 8/30 ARM: shmobile: sh73a0: add irqpin DT nodes
In reply to Simon HormanFrom: Guennadi Liakhovetski <[email protected]>
Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree.
--- arch/arm/boot/dts/sh73a0.dtsi | 81 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)
arch/arm/boot/dts/sh73a0.dtsi +81 -0
@@ -38,6 +38,87 @@ <0xf0000100 0x100>; }; + irqpin0: irqpin at e6900000 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900000 4>, + <0xe6900010 4>, + <0xe6900020 1>, + <0xe6900040 1>, + <0xe6900060 1>; + interrupt-parent = <&gic>; + interrupts = <0 1 0x4 + 0 2 0x4 + 0 3 0x4 + 0 4 0x4 + 0 5 0x4 + 0 6 0x4 + 0 7 0x4 + 0 8 0x4>; + }; + + irqpin1: irqpin at e6900004 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupt-parent = <&gic>; + interrupts = <0 9 0x4 + 0 10 0x4 + 0 11 0x4 + 0 12 0x4 + 0 13 0x4 + 0 14 0x4 + 0 15 0x4 + 0 16 0x4>; + control-parent; + }; + + irqpin2: irqpin at e6900008 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900008 4>, + <0xe6900018 4>, + <0xe6900028 1>, + <0xe6900048 1>, + <0xe6900068 1>; + interrupt-parent = <&gic>; + interrupts = <0 17 0x4 + 0 18 0x4 + 0 19 0x4 + 0 20 0x4 + 0 21 0x4 + 0 22 0x4 + 0 23 0x4 + 0 24 0x4>; + }; + + irqpin3: irqpin at e690000c { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe690000c 4>, + <0xe690001c 4>, + <0xe690002c 1>, + <0xe690004c 1>, + <0xe690006c 1>; + interrupt-parent = <&gic>; + interrupts = <0 25 0x4 + 0 26 0x4 + 0 27 0x4 + 0 28 0x4 + 0 29 0x4 + 0 30 0x4 + 0 31 0x4 + 0 32 0x4>; + }; + i2c0: i2c at 0xe6820000 { #address-cells = <1>; #size-cells = <0>;
Signature · 1 line
1.7.10.4
PATCH 9/30 ARM: shmobile: Disallow PINCTRL without GPIOLIB
In reply to Simon HormanFrom: Magnus Damm <[email protected]>
Modify mach-shmobile to only select PINCTRL in case of ARCH_WANT_OPTIONAL_GPIOLIB is set.
This fixes a build error triggered when adding a new SoC lacking GPIO software support (ARCH_WANT_OPTIONAL_GPIOLIB=n):
CC drivers/tty/vt/keyboard.o
In file included from drivers/pinctrl/core.c:30:0:include/asm-generic/gpio.h: In function 'gpio_get_value_cansleep':include/asm-generic/gpio.h:270:2: error: implicit declaration of function '__gpio_get_value' include/asm-generic/gpio.h: In function 'gpio_set_value_cansleep':include/asm-generic/gpio.h:276:2: error: implicit declaration of function '__gpio_set_value' drivers/pinctrl/core.c: In function 'pinctrl_ready_for_gpio_range':drivers/pinctrl/core.c:297:9: error: implicit declaration of function 'gpio_to_chip' drivers/pinctrl/core.c:297:27: warning: initialization makes pointer from integer without a cast drivers/pinctrl/core.c:304:45: error: dereferencing pointer to incomplete type drivers/pinctrl/core.c:305:26: error: dereferencing pointer to incomplete type drivers/pinctrl/core.c:305:39: error: dereferencing pointer to incomplete type make[2]: *** [drivers/pinctrl/core.o] Error 1
make[1]: *** [drivers/pinctrl] Error 2
make[1]: *** Waiting for unfinished jobs....
LD drivers/sh/built-in.o
--- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/Kconfig +1 -1
@@ -725,7 +725,7 @@ config ARCH_SHMOBILE select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select NO_IOPORT - select PINCTRL + select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ help
Signature · 1 line
1.7.10.4
PATCH 10/30 ARM: shmobile: r8a73a4: add thermal driver support
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
You can get current thermal by
Quoted 1 line
cat /sys/class/thermal/thermal_zone?/temp
--- arch/arm/boot/dts/r8a73a4.dtsi | 7 +++++++ arch/arm/mach-shmobile/clock-r8a73a4.c | 13 ++++++++++++- arch/arm/mach-shmobile/setup-r8a73a4.c | 15 +++++++++++++++ 3 files changed, 34 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r8a73a4.dtsi +7 -0
@@ -84,4 +84,11 @@ <0 56 4>, <0 57 4>; }; + thermal at e61f0000 { + compatible = "renesas,rcar-thermal"; + reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>, + <0xe61f0200 0x38>, <0xe61f0300 0x38>; + interrupt-parent = <&gic>; + interrupts = <0 69 4>; + }; };
arch/arm/mach-shmobile/clock-r8a73a4.c +12 -1
@@ -29,6 +29,7 @@#define MPCKCR 0xe6150080#define SMSTPCR2 0xe6150138 +#define SMSTPCR5 0xe6150144static struct clk_mapping cpg_mapping = { .phys =CPG_BASE ,
@@ -56,7 +57,12 @@ static struct clk *main_clks[] = { &extal2_clk, }; -enum {MSTP217 ,MSTP216 ,MSTP207 ,MSTP206 ,MSTP204 ,MSTP203 ,MSTP_NR }; +enum { +MSTP217 ,MSTP216 ,MSTP207 ,MSTP206 ,MSTP204 ,MSTP203 , +MSTP522 , +MSTP_NR +}; +static struct clk mstp_clks[MSTP_NR ] = { [MSTP204 ] =SH_CLK_MSTP32 (&extal2_clk,SMSTPCR2 ,4 ,0 ),/* SCIFA0 */ [MSTP203 ] =SH_CLK_MSTP32 (&extal2_clk,SMSTPCR2 ,3 ,0 ),/* SCIFA1 */
@@ -64,6 +70,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */ [MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */ [MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */ + [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */ };static struct clk_lookup lookups[] = {
@@ -73,6 +80,10 @@ static struct clk_lookup lookups[] = {CLKDEV_DEV_ID ("sh-sci.3" , &mstp_clks[MSTP207 ]),CLKDEV_DEV_ID ("sh-sci.4" , &mstp_clks[MSTP216 ]),CLKDEV_DEV_ID ("sh-sci.5" , &mstp_clks[MSTP217 ]), +CLKDEV_DEV_ID ("rcar_thermal" , &mstp_clks[MSTP522 ]), + +/* for DT */ + CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), };void __init r8a73a4_clock_init (void )
arch/arm/mach-shmobile/setup-r8a73a4.c +15 -0
@@ -155,6 +155,20 @@ static const struct resource irqc1_resources[] = { &irqc##idx##_data, \ sizeof(struct renesas_irqc_config)) +/* Thermal0 -> Thermal2 */ +static const struct resource thermal0_resources[] = { +DEFINE_RES_MEM (0xe61f0000 ,0x14 ), +DEFINE_RES_MEM (0xe61f0100 ,0x38 ), +DEFINE_RES_MEM (0xe61f0200 ,0x38 ), +DEFINE_RES_MEM (0xe61f0300 ,0x38 ), +DEFINE_RES_IRQ (gic_spi (69 )), +}; + +#define r8a73a4_register_thermal () \ + platform_device_register_simple("rcar_thermal", -1, \ + thermal0_resources, \ + ARRAY_SIZE(thermal0_resources)) +void __init r8a73a4_add_standard_devices (void ) {r8a73a4_register_scif (SCIFA0 );
@@ -165,6 +179,7 @@ void __init r8a73a4_add_standard_devices(void)r8a73a4_register_scif (SCIFB3 );r8a73a4_register_irqc (0 );r8a73a4_register_irqc (1 ); +r8a73a4_register_thermal (); }#ifdef CONFIG_USE_OF
Signature · 1 line
1.7.10.4
PATCH 11/30 ARM: shmobile: r8a7740: Migrate from INTC to GIC
In reply to Simon HormanFrom: Bastian Hecht <[email protected]>
With the added capabilty of the intc_irqpin driver to handle shared external IRQs, all prerequisites are fulfilled and we are ready to migrate completely to GIC. This includes the following steps:
- Kconfig: select ARM_GIC and RENESAS_INTC_IRQPIN
- intc-r8a7740: Throw out all legacy INTC code and init the GIC. We need to mask out all shared IRQs as it is needed by the shared intc_irqpin driver.
- setup-r8a7740: Add 4 irqpin devices to handle external IRQs and update all IRQ numbers to point to the GIC SPI.
- board-armadillo: Update all IRQ numbers to point to the GIC SPI.
- pfc-r8a7740: Update all IRQ numbers of the GPIOs to point to the GIC
SPI.
--- arch/arm/mach-shmobile/Kconfig | 2 + arch/arm/mach-shmobile/board-armadillo800eva.c | 35 +- arch/arm/mach-shmobile/intc-r8a7740.c | 641 ++---------------------- arch/arm/mach-shmobile/setup-r8a7740.c | 192 +++++-- drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 64 +-- 5 files changed, 239 insertions(+), 695 deletions(-)
arch/arm/mach-shmobile/Kconfig +2 -0
@@ -30,8 +30,10 @@ config ARCH_R8A73A4 config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC select CPU_V7 select SH_CLK_CPG + select RENESAS_INTC_IRQPIN config ARCH_R8A7778 bool "R-Car M1 (R8A77780)"
arch/arm/mach-shmobile/board-armadillo800eva.c +17 -18
@@ -145,7 +145,7 @@* see * usbhsf_power_ctrl() */ -#define IRQ7 evt2irq(0x02e0) +#define IRQ7 irq_pin(7)#define USBCR1 IOMEM(0xe605810a)#define USBH 0xC6700000#define USBH_USBCTR 0x10834
@@ -330,7 +330,7 @@ static struct resource usbhsf_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = evt2irq(0x0A20), + .start = gic_spi(51), .flags = IORESOURCE_IRQ, }, };
@@ -363,7 +363,7 @@ static struct resource sh_eth_resources[] = { .end = 0xe9a02000 - 1, .flags = IORESOURCE_MEM, }, { - .start = evt2irq(0x0500), + .start = gic_spi(110), .flags = IORESOURCE_IRQ, }, };
@@ -417,7 +417,7 @@ static struct resource lcdc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x580), + .start = gic_spi(177), .flags = IORESOURCE_IRQ, }, };
@@ -452,7 +452,7 @@ static struct resource hdmi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x1700), + .start = gic_spi(131), .flags = IORESOURCE_IRQ, }, [2] = {
@@ -514,7 +514,7 @@ static struct resource hdmi_lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x1780), + .start = gic_spi(178), .flags = IORESOURCE_IRQ, }, };
@@ -574,7 +574,7 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] =* We can use IRQ31 as card detect irq, * but it needs chattering removal operation */ -#define IRQ31 evt2irq(0x33E0) +#define IRQ31 irq_pin(31)static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx =SHDMA_SLAVE_SDHI0_TX , .dma_slave_rx =SHDMA_SLAVE_SDHI0_RX ,
@@ -596,12 +596,12 @@ static struct resource sdhi0_resources[] = {*/ { .name = SH_MOBILE_SDHI_IRQ_SDCARD, - .start = evt2irq(0x0E20), + .start = gic_spi(118), .flags = IORESOURCE_IRQ, }, { .name = SH_MOBILE_SDHI_IRQ_SDIO, - .start = evt2irq(0x0E40), + .start = gic_spi(119), .flags = IORESOURCE_IRQ, }, };
@@ -633,15 +633,15 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0E80), + .start = gic_spi(121), .flags = IORESOURCE_IRQ, }, [2] = { - .start = evt2irq(0x0EA0), + .start = gic_spi(122), .flags = IORESOURCE_IRQ, }, [3] = { - .start = evt2irq(0x0EC0), + .start = gic_spi(123), .flags = IORESOURCE_IRQ, }, };
@@ -674,12 +674,12 @@ static struct resource sh_mmcif_resources[] = { }, [1 ] = {/* MMC ERR */ - .start =evt2irq (0x1AC0 ), + .start =gic_spi (56 ), .flags =IORESOURCE_IRQ , }, [2 ] = {/* MMC NOR */ - .start =evt2irq (0x1AE0 ), + .start =gic_spi (57 ), .flags =IORESOURCE_IRQ , }, };
@@ -756,7 +756,7 @@ static struct resource ceu0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x0500), + .start = gic_spi(160), .flags = IORESOURCE_IRQ, }, [2] = {
@@ -798,7 +798,7 @@ static struct resource fsi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x1840), + .start = gic_spi(9), .flags = IORESOURCE_IRQ, }, };
@@ -881,7 +881,7 @@ static struct platform_device i2c_gpio_device = {static struct i2c_board_info i2c0_devices[] = { {I2C_BOARD_INFO ("st1232-ts" ,0x55 ), - .irq =evt2irq (0x0340 ), + .irq =irq_pin (10 ), }, {I2C_BOARD_INFO ("wm8978" ,0x1a ),
@@ -1207,7 +1207,6 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .map_io = r8a7740_map_io, .init_early = eva_add_early_devices, .init_irq = r8a7740_init_irq, - .handle_irq = shmobile_handle_irq_intc, .init_machine = eva_init, .init_late = shmobile_init_late, .init_time = eva_earlytimer_init,
arch/arm/mach-shmobile/intc-r8a7740.c +30 -611
650 lines not on this page · raw message
arch/arm/mach-shmobile/setup-r8a7740.c +158 -34
348 lines not on this page · raw message
drivers/pinctrl/sh-pfc/pfc-r8a7740.c +32 -32
70 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 12/30 ARM: shmobile: sh73a0: add a TWD clock
In reply to Simon HormanFrom: Guennadi Liakhovetski <[email protected]>
Add a TWD clock on sh73a0 for the smp_twd driver to properly update the clock's frequency upon cpufreq events.
--- arch/arm/mach-shmobile/clock-sh73a0.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm/mach-shmobile/clock-sh73a0.c +16 -0
@@ -288,6 +288,20 @@ static struct clk div4_clks[DIV4_NR] = { [DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0), }; +static unsigned long twd_recalc (struct clk *clk) +{ +return clk_get_rate (clk->parent) /4 ; +} + +static struct sh_clk_ops twd_clk_ops = { + .recalc = twd_recalc, +}; + +static struct clk twd_clk = { + .parent = &div4_clks[DIV4_Z ], + .ops = &twd_clk_ops, +}; +enum {DIV6_VCK1 ,DIV6_VCK2 ,DIV6_VCK3 ,DIV6_ZB1 ,DIV6_FLCTL ,DIV6_SDHI0 ,DIV6_SDHI1 ,DIV6_SDHI2 ,DIV6_FSIA ,DIV6_FSIB ,DIV6_SUB ,
@@ -482,6 +496,7 @@ static struct clk dsi1phy_clk = {static struct clk *late_main_clks[] = { &dsi0phy_clk, &dsi1phy_clk, + &twd_clk, };enum {MSTP001 ,
@@ -546,6 +561,7 @@ static struct clk mstp_clks[MSTP_NR] = {static struct clk_lookup lookups[] = {/* main clocks */ CLKDEV_CON_ID ("r_clk" , &r_clk), +CLKDEV_DEV_ID ("smp_twd" , &twd_clk),/* smp_twd */ /* DIV6 clocks */ CLKDEV_CON_ID ("vck1_clk" , &div6_clks[DIV6_VCK1 ]),
Signature · 1 line
1.7.10.4
PATCH 13/30 ARM: shmobile: sh73a0: remove DIV4_ZT* clocks
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
DIV4_ZT* clocks are for debugging and trace bus clock. It is not necessary to control it from Linux/Software.
--- arch/arm/mach-shmobile/clock-sh73a0.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
arch/arm/mach-shmobile/clock-sh73a0.c +1 -3
@@ -269,7 +269,7 @@ static struct clk_div4_table div4_table = { };enum {DIV4_I ,DIV4_ZG ,DIV4_M3 ,DIV4_B ,DIV4_M1 ,DIV4_M2 , -DIV4_Z ,DIV4_ZTR ,DIV4_ZT ,DIV4_ZX ,DIV4_HP ,DIV4_NR }; +DIV4_Z ,DIV4_ZX ,DIV4_HP ,DIV4_NR };#define DIV4 (_reg, _bit, _mask, _flags) \ SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
@@ -282,8 +282,6 @@ static struct clk div4_clks[DIV4_NR] = { [DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0), [DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0), [DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0), - [DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0), - [DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0), [DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0), [DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0), };
Signature · 1 line
1.7.10.4
PATCH 14/30 ARM: shmobile: sh7372: remove DIV4_ZT* clocks
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
DIV4_ZT* clocks are for debugging and trace bus clock. It is not necessary to control it from Linux/Software.
--- arch/arm/mach-shmobile/clock-sh7372.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
arch/arm/mach-shmobile/clock-sh7372.c +1 -5
@@ -342,7 +342,7 @@ static struct clk_div4_table div4_table = { };enum {DIV4_I ,DIV4_ZG ,DIV4_B ,DIV4_M1 ,DIV4_CSIR , -DIV4_ZTR ,DIV4_ZT ,DIV4_ZX ,DIV4_HP , +DIV4_ZX ,DIV4_HP ,DIV4_ISPB ,DIV4_S ,DIV4_ZB ,DIV4_ZB3 ,DIV4_CP ,DIV4_DDRP ,DIV4_NR };
@@ -355,8 +355,6 @@ static struct clk div4_clks[DIV4_NR] = { [DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT), [DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT), [DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0), - [DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0), - [DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0), [DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0), [DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0), [DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
@@ -516,8 +514,6 @@ static struct clk_lookup lookups[] = {CLKDEV_CON_ID ("b_clk" , &div4_clks[DIV4_B ]),CLKDEV_CON_ID ("m1_clk" , &div4_clks[DIV4_M1 ]),CLKDEV_CON_ID ("csir_clk" , &div4_clks[DIV4_CSIR ]), -CLKDEV_CON_ID ("ztr_clk" , &div4_clks[DIV4_ZTR ]), -CLKDEV_CON_ID ("zt_clk" , &div4_clks[DIV4_ZT ]),CLKDEV_CON_ID ("zx_clk" , &div4_clks[DIV4_ZX ]),CLKDEV_CON_ID ("hp_clk" , &div4_clks[DIV4_HP ]), CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
Signature · 1 line
1.7.10.4
PATCH 15/30 ARM: shmobile: add struct clk_ratio and fixed ratio clock macro
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
Renesas chip has many clocks inside,
and some of them are using fixed ratio via parent clock. Current shmobile clock code is using own divX_recalc function and divX_clk_ops.
This patch can reduce these code
--- arch/arm/mach-shmobile/clock.c | 13 +++++++++ arch/arm/mach-shmobile/include/mach/clock.h | 39 +++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) create mode 100644 arch/arm/mach-shmobile/include/mach/clock.h
arch/arm/mach-shmobile/clock.c +13 -0
@@ -23,6 +23,19 @@#include <linux/init.h> #include <linux/sh_clk.h> #include <linux/export.h> +#include <mach/clock.h> +#include <mach/common.h> + +unsigned long shmobile_fixed_ratio_clk_recalc (struct clk *clk) +{ +struct clk_ratio *p = clk->priv; + +return clk->parent->rate / p->div * p->mul; +}; + +struct sh_clk_ops shmobile_fixed_ratio_clk_ops = { + .recalc = shmobile_fixed_ratio_clk_recalc, +};int __init shmobile_clk_init (void ) {
arch/arm/mach-shmobile/include/mach/clock.h new file +39 -0
@@ -0,0 +1,39 @@ +#ifndef CLOCK_H +#define CLOCK_H + +unsigned long shmobile_fixed_ratio_clk_recalc (struct clk *clk); +extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops; + +/* clock ratio */ +struct clk_ratio { +int mul; +int div; +}; + +#define SH_CLK_RATIO (name, m, d) \ +static struct clk_ratio name ##_ratio = { \ + .mul = m, \ + .div = d, \ +} + +#define SH_FIXED_RATIO_CLKg (name, p, r) \ +struct clk name = { \ + .parent = &p, \ + .ops = &shmobile_fixed_ratio_clk_ops,\ + .priv = &r ## _ratio, \ +} + +#define SH_FIXED_RATIO_CLK (name, p, r) \ +static SH_FIXED_RATIO_CLKg(name, p, r); + +#define SH_FIXED_RATIO_CLK_SET (name, p, m, d) \ + SH_CLK_RATIO(name, m, d); \ + SH_FIXED_RATIO_CLK(name, p, name); + +#define SH_CLK_SET_RATIO (p, m, d) \ +{ \ + (p)->mul = m; \ + (p)->div = d; \ +} + +#endif
Signature · 1 line
1.7.10.4
PATCH 16/30 ARM: shmobile: sh7372: use fixed ratio clock
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
Current clock-sh7372 is using own implement
for each divX clocks.
This patch switches to use fixed ratio clock,
and was tesed on mackerel board.
--- arch/arm/mach-shmobile/clock-sh7372.c | 44 ++++++--------------------------- 1 file changed, 7 insertions(+), 37 deletions(-)
arch/arm/mach-shmobile/clock-sh7372.c +7 -37
@@ -21,6 +21,7 @@#include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <mach/clock.h> #include <mach/common.h> /* SH7372 registers */
@@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = { .rate = 48000000, }; -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc (struct clk *clk) -{ -return clk->parent->rate /2 ; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; +SH_CLK_RATIO (div2,1 ,2 ); -/* Divide dv_clki by two */ -struct clk sh7372_dv_clki_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7372_dv_clki_clk, -}; - -/* Divide extal1 by two */ -static struct clk extal1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7372_extal1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7372_extal2_clk, -}; - -/* Divide extal2 by four */ -static struct clk extal2_div4_clk = { - .ops = &div2_clk_ops, - .parent = &extal2_div2_clk, -}; +SH_FIXED_RATIO_CLKg (sh7372_dv_clki_div2_clk, sh7372_dv_clki_clk, div2); +SH_FIXED_RATIO_CLK (extal1_div2_clk, sh7372_extal1_clk, div2); +SH_FIXED_RATIO_CLK (extal2_div2_clk, sh7372_extal2_clk, div2); +SH_FIXED_RATIO_CLK (extal2_div4_clk, extal2_div2_clk, div2);/* PLLC0 and PLLC1 */ static unsigned long pllc01_recalc (struct clk *clk)
@@ -147,10 +121,7 @@ static struct clk pllc1_clk = { };/* Divide PLLC1 by two */ -static struct clk pllc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pllc1_clk, -}; +SH_FIXED_RATIO_CLK (pllc1_div2_clk, pllc1_clk, div2);/* PLLC2 */
@@ -650,5 +621,4 @@ void __init sh7372_clock_init(void)shmobile_clk_init (); else panic("failed to setup sh7372 clocks\n"); - }
Signature · 1 line
1.7.10.4
PATCH 16/30 ARM: shmobile: sh7372: use fixed ratio clock
Hello.
Quoted 18 lines · Simon Horman
From: Kuninori Morimoto <[email protected]>
Current clock-sh7372 is using own implement
for each divX clocks.
This patch switches to use fixed ratio clock,
and was tesed on mackerel board.Signed-off-by Kuninori Morimoto <[email protected]>Acked-by Magnus Damm <[email protected]>Signed-off-by Simon Horman <[email protected]>--- arch/arm/mach-shmobile/clock-sh7372.c | 44 ++++++--------------------------- 1 file changed, 7 insertions(+), 37 deletions(-)arch/arm/mach-shmobile/clock-sh7372.c +0
-0
[...]
Quoted 1 line
arch/arm/mach-shmobile/clock-sh7372.c +0
-0@@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = {
[...]
arch/arm/mach-shmobile/clock-sh7372.c struct clk sh7372_extal2_clk = { · line 92
Quoted 4 lines
arch/arm/mach-shmobile/clock-sh7372.c +4
-0+SH_FIXED_RATIO_CLKg (sh7372_dv_clki_div2_clk, sh7372_dv_clki_clk, div2); +SH_FIXED_RATIO_CLK (extal1_div2_clk, sh7372_extal1_clk, div2); +SH_FIXED_RATIO_CLK (extal2_div2_clk, sh7372_extal2_clk, div2); +SH_FIXED_RATIO_CLK (extal2_div4_clk, extal2_div2_clk, div2);
Note that SH_FIXED_RATIO_CLK() definition already includes ; -- it
probably should be removed from there.
WBR, Sergei
PATCH 16/30 ARM: shmobile: sh7372: use fixed ratio clock
Quoted 9 lines · Sergei Shtylyov
Quoted 1 line
(quoted diff) +0
-0@@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = {[...]
arch/arm/mach-shmobile/clock-sh7372.c struct clk sh7372_extal2_clk = { · line 92
Quoted 4 lines
arch/arm/mach-shmobile/clock-sh7372.c +4
-0+SH_FIXED_RATIO_CLKg (sh7372_dv_clki_div2_clk, sh7372_dv_clki_clk, div2); +SH_FIXED_RATIO_CLK (extal1_div2_clk, sh7372_extal1_clk, div2); +SH_FIXED_RATIO_CLK (extal2_div2_clk, sh7372_extal2_clk, div2); +SH_FIXED_RATIO_CLK (extal2_div4_clk, extal2_div2_clk, div2);Note that
SH_FIXED_RATIO_CLK()definition already includes ; -- it
probably should be removed from there.
Most macros that we have in the kernel like this don't include the semicolon, which seems better since it is harder to misuse (the compiler will complain about a missing semicolon but not always about an extranous one) and gives a more consistent syntax overall.
It's probably not worth changing it now for the shmobile clock code, since that is getting changed over to common clock in the future, but you may want to remember this for future macro definitions.
Arnd
PATCH 17/30 ARM: shmobile: sh73a0: use fixed ratio clock
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
Current clock-sh73a0 is using own implement
for each divX clocks.
This patch switches to use fixed ratio clock,
and was tesed on kzm9g board.
--- arch/arm/mach-shmobile/clock-sh73a0.c | 72 ++++++--------------------------- 1 file changed, 12 insertions(+), 60 deletions(-)
arch/arm/mach-shmobile/clock-sh73a0.c +12 -60
@@ -22,6 +22,7 @@#include <linux/sh_clk.h> #include <linux/clkdev.h> #include <asm/processor.h> +#include <mach/clock.h> #include <mach/common.h> #define FRQCRA IOMEM(0xe6150000)
@@ -83,61 +84,16 @@ struct clk sh73a0_extal2_clk = { .rate = 48000000, }; -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc (struct clk *clk) -{ -return clk->parent->rate /2 ; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; - -static unsigned long div7_recalc (struct clk *clk) -{ -return clk->parent->rate /7 ; -} - -static struct sh_clk_ops div7_clk_ops = { - .recalc = div7_recalc, -}; - -static unsigned long div13_recalc (struct clk *clk) -{ -return clk->parent->rate /13 ; -} - -static struct sh_clk_ops div13_clk_ops = { - .recalc = div13_recalc, -}; - -/* Divide extal1 by two */ -static struct clk extal1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh73a0_extal1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh73a0_extal2_clk, -}; -static struct sh_clk_ops main_clk_ops = { .recalc = followparent_recalc, };/* Main clock */ static struct clk main_clk = { +/* .parent wll be set on sh73a0_clock_init() */ .ops = &main_clk_ops, }; -/* Divide Main clock by two */ -static struct clk main_div2_clk = { - .ops = &div2_clk_ops, - .parent = &main_clk, -}; -/* PLL0, PLL1, PLL2, PLL3 */ static unsigned long pll_recalc (struct clk *clk) {
@@ -193,21 +149,17 @@ static struct clk pll3_clk = { .enable_bit = 3, }; -/* Divide PLL */ -static struct clk pll1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pll1_clk, -}; - -static struct clk pll1_div7_clk = { - .ops = &div7_clk_ops, - .parent = &pll1_clk, -}; +/* A fixed divide block */ +SH_CLK_RATIO (div2,1 ,2 ); +SH_CLK_RATIO (div7,1 ,7 ); +SH_CLK_RATIO (div13,1 ,13 ); -static struct clk pll1_div13_clk = { - .ops = &div13_clk_ops, - .parent = &pll1_clk, -}; +SH_FIXED_RATIO_CLK (extal1_div2_clk, sh73a0_extal1_clk, div2); +SH_FIXED_RATIO_CLK (extal2_div2_clk, sh73a0_extal2_clk, div2); +SH_FIXED_RATIO_CLK (main_div2_clk, main_clk, div2); +SH_FIXED_RATIO_CLK (pll1_div2_clk, pll1_clk, div2); +SH_FIXED_RATIO_CLK (pll1_div7_clk, pll1_clk, div7); +SH_FIXED_RATIO_CLK (pll1_div13_clk, pll1_clk, div13);/* External input clock */ struct clk sh73a0_extcki_clk = {
Signature · 1 line
1.7.10.4
PATCH 18/30 ARM: shmobile: r8a7740: tidyup comment/implementation mismatch
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
Current clock-r8a7740's DIV4/DIV6/MSTP implemented area and its comment are mismatching.
This patch tidyup its comment/implementation area.
--- arch/arm/mach-shmobile/clock-r8a7740.c | 60 +++++++++++++++++--------------- 1 file changed, 31 insertions(+), 29 deletions(-)
arch/arm/mach-shmobile/clock-r8a7740.c +31 -29
@@ -323,6 +323,7 @@ struct clk *main_clks[] = { &fsibck_clk, }; +/* DIV4 clocks */ static void div4_kick (struct clk *clk) {unsigned long value;
@@ -346,6 +347,26 @@ static struct clk_div4_table div4_table = { .kick = div4_kick, }; +enum { +DIV4_I ,DIV4_ZG ,DIV4_B ,DIV4_M1 ,DIV4_HP , +DIV4_HPP ,DIV4_USBP ,DIV4_S ,DIV4_ZB ,DIV4_M3 ,DIV4_CP , +DIV4_NR +}; + +struct clk div4_clks[DIV4_NR ] = { + [DIV4_I ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRA ,20 ,0x6fff ,CLK_ENABLE_ON_INIT ), + [DIV4_ZG ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRA ,16 ,0x6fff ,CLK_ENABLE_ON_INIT ), + [DIV4_B ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRA ,8 ,0x6fff ,CLK_ENABLE_ON_INIT ), + [DIV4_M1 ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRA ,4 ,0x6fff ,CLK_ENABLE_ON_INIT ), + [DIV4_HP ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRB ,4 ,0x6fff ,0 ), + [DIV4_HPP ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,20 ,0x6fff ,0 ), + [DIV4_USBP ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,16 ,0x6fff ,0 ), + [DIV4_S ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,12 ,0x6fff ,0 ), + [DIV4_ZB ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,8 ,0x6fff ,0 ), + [DIV4_M3 ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,4 ,0x6fff ,0 ), + [DIV4_CP ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,0 ,0x6fff ,0 ), +}; +/* DIV6 reparent */ enum {DIV6_HDMI ,
@@ -391,6 +412,16 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2), }; +/* DIV6 clocks */ +enum { +DIV6_SUB , +DIV6_NR +}; + +static struct clk div6_clks[DIV6_NR ] = { + [DIV6_SUB ] =SH_CLK_DIV6 (&pllc1_div2_clk,SUBCKCR ,0 ), +}; +/* HDMI1/2 clock */ static unsigned long hdmi12_recalc (struct clk *clk) {
@@ -456,35 +487,6 @@ static struct clk fsidivs[] = {/* MSTP */ enum { -DIV4_I ,DIV4_ZG ,DIV4_B ,DIV4_M1 ,DIV4_HP , -DIV4_HPP ,DIV4_USBP ,DIV4_S ,DIV4_ZB ,DIV4_M3 ,DIV4_CP , -DIV4_NR -}; - -struct clk div4_clks[DIV4_NR ] = { - [DIV4_I ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRA ,20 ,0x6fff ,CLK_ENABLE_ON_INIT ), - [DIV4_ZG ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRA ,16 ,0x6fff ,CLK_ENABLE_ON_INIT ), - [DIV4_B ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRA ,8 ,0x6fff ,CLK_ENABLE_ON_INIT ), - [DIV4_M1 ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRA ,4 ,0x6fff ,CLK_ENABLE_ON_INIT ), - [DIV4_HP ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRB ,4 ,0x6fff ,0 ), - [DIV4_HPP ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,20 ,0x6fff ,0 ), - [DIV4_USBP ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,16 ,0x6fff ,0 ), - [DIV4_S ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,12 ,0x6fff ,0 ), - [DIV4_ZB ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,8 ,0x6fff ,0 ), - [DIV4_M3 ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,4 ,0x6fff ,0 ), - [DIV4_CP ] =SH_CLK_DIV4 (&pllc1_clk,FRQCRC ,0 ,0x6fff ,0 ), -}; - -enum { -DIV6_SUB , -DIV6_NR -}; - -static struct clk div6_clks[DIV6_NR ] = { - [DIV6_SUB ] =SH_CLK_DIV6 (&pllc1_div2_clk,SUBCKCR ,0 ), -}; - -enum {MSTP128 ,MSTP127 ,MSTP125 ,MSTP116 ,MSTP111 ,MSTP100 ,MSTP117 ,
Signature · 1 line
1.7.10.4
PATCH 19/30 ARM: shmobile: r8a7740: use fixed ratio clock
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
Current clock-r8a7740 is using own implement
for each divX clocks.
This patch switches to use fixed ratio clock,
and was tesed on armadillo board.
--- arch/arm/mach-shmobile/clock-r8a7740.c | 54 ++++++-------------------------- 1 file changed, 9 insertions(+), 45 deletions(-)
arch/arm/mach-shmobile/clock-r8a7740.c +9 -45
@@ -22,6 +22,7 @@#include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <mach/clock.h> #include <mach/common.h> #include <mach/r8a7740.h>
@@ -97,42 +98,13 @@ static struct clk dv_clk = { .rate = 27000000, }; -static unsigned long div_recalc (struct clk *clk) -{ -return clk->parent->rate / (int )(clk->priv); -} - -static struct sh_clk_ops div_clk_ops = { - .recalc = div_recalc, -}; +SH_CLK_RATIO (div2,1 ,2 ); +SH_CLK_RATIO (div1k,1 ,1024 ); -/* extal1 / 2 */ -static struct clk extal1_div2_clk = { - .ops = &div_clk_ops, - .priv = (void *)2 , - .parent = &extal1_clk, -}; - -/* extal1 / 1024 */ -static struct clk extal1_div1024_clk = { - .ops = &div_clk_ops, - .priv = (void *)1024 , - .parent = &extal1_clk, -}; - -/* extal1 / 2 / 1024 */ -static struct clk extal1_div2048_clk = { - .ops = &div_clk_ops, - .priv = (void *)1024 , - .parent = &extal1_div2_clk, -}; - -/* extal2 / 2 */ -static struct clk extal2_div2_clk = { - .ops = &div_clk_ops, - .priv = (void *)2 , - .parent = &extal2_clk, -}; +SH_FIXED_RATIO_CLK (extal1_div2_clk, extal1_clk, div2); +SH_FIXED_RATIO_CLK (extal1_div1024_clk, extal1_clk, div1k); +SH_FIXED_RATIO_CLK (extal1_div2048_clk, extal1_div2_clk, div1k); +SH_FIXED_RATIO_CLK (extal2_div2_clk, extal2_clk, div2);static struct sh_clk_ops followparent_clk_ops = { .recalc = followparent_recalc,
@@ -143,11 +115,7 @@ static struct clk system_clk = { .ops = &followparent_clk_ops, }; -static struct clk system_div2_clk = { - .ops = &div_clk_ops, - .priv = (void *)2 , - .parent = &system_clk, -}; +SH_FIXED_RATIO_CLK (system_div2_clk, system_clk, div2);/* r_clk */ static struct clk r_clk = {
@@ -184,11 +152,7 @@ static struct clk pllc1_clk = { };/* PLLC1 / 2 */ -static struct clk pllc1_div2_clk = { - .ops = &div_clk_ops, - .priv = (void *)2 , - .parent = &pllc1_clk, -}; +SH_FIXED_RATIO_CLK (pllc1_div2_clk, pllc1_clk, div2);/* USB clock */ /*
Signature · 1 line
1.7.10.4
PATCH 20/30 ARM: shmobile: r8a7779: remove DIV4 clocks and use fixed ratio clock
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
R-Car H1 has many clocks, and it is possible to read/use clock ratio of these clocks from FRQMRx as DIV4 clocks.
But, these ratio are fixed value and these are decided
by MD pin status.
This means that we can use fixed ratio clock via MD pin status, instead of DIV4 clocks.
This patch reads MD pin status, and sets PLLA clock (= root clock), and used fixed ratio clock for other clocks.
It was tesed on marzen board.
--- arch/arm/mach-shmobile/clock-r8a7779.c | 196 ++++++++++++++++++-------------- 1 file changed, 109 insertions(+), 87 deletions(-)
arch/arm/mach-shmobile/clock-r8a7779.c +109 -87
@@ -17,13 +17,17 @@* along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/bitops.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <mach/clock.h> #include <mach/common.h> +#define MD (nr) BIT(nr) +#define FRQMR IOMEM(0xffc80014)#define MSTPCR0 IOMEM(0xffc80030)#define MSTPCR1 IOMEM(0xffc80034)
@@ -36,6 +40,9 @@#define MSTPCR6 IOMEM(0xffc80058)#define MSTPCR7 IOMEM(0xffc80040) +#define MODEMR 0xffcc0020 + +/* ioremap() through clock mapping mandatory to avoid * collision with ARM coherent DMA virtual memory range. */
@@ -50,40 +57,39 @@ static struct clk_mapping cpg_mapping = {* from the platform code. */ static struct clk plla_clk = { - .rate =1500000000 , +/* .rate will be updated on r8a7779_clock_init() */ .mapping = &cpg_mapping, }; +/* +* clock ratio of these clock will be updated +* on r8a7779_clock_init() +*/ +SH_FIXED_RATIO_CLK_SET (clkz_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clkzs_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clki_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clks_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clks1_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clks3_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clks4_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clkb_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clkout_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clkp_clk, plla_clk,1 ,1 ); +SH_FIXED_RATIO_CLK_SET (clkg_clk, plla_clk,1 ,1 ); +static struct clk *main_clks[] = { &plla_clk, -}; - -static int divisors[] = {0 ,0 ,0 ,6 ,8 ,12 ,16 ,0 ,24 ,32 ,36 ,0 ,0 ,0 ,0 ,0 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors =ARRAY_SIZE (divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, -}; - -enum {DIV4_S ,DIV4_OUT ,DIV4_S4 ,DIV4_S3 ,DIV4_S1 ,DIV4_P ,DIV4_NR }; - -static struct clk div4_clks[DIV4_NR ] = { - [DIV4_S ] =SH_CLK_DIV4 (&plla_clk,FRQMR ,20 , -0x0018 ,CLK_ENABLE_ON_INIT ), - [DIV4_OUT ] =SH_CLK_DIV4 (&plla_clk,FRQMR ,16 , -0x0700 ,CLK_ENABLE_ON_INIT ), - [DIV4_S4 ] =SH_CLK_DIV4 (&plla_clk,FRQMR ,12 , -0x0040 ,CLK_ENABLE_ON_INIT ), - [DIV4_S3 ] =SH_CLK_DIV4 (&plla_clk,FRQMR ,8 , -0x0010 ,CLK_ENABLE_ON_INIT ), - [DIV4_S1 ] =SH_CLK_DIV4 (&plla_clk,FRQMR ,4 , -0x0060 ,CLK_ENABLE_ON_INIT ), - [DIV4_P ] =SH_CLK_DIV4 (&plla_clk,FRQMR ,0 , -0x0300 ,CLK_ENABLE_ON_INIT ), + &clkz_clk, + &clkzs_clk, + &clki_clk, + &clks_clk, + &clks1_clk, + &clks3_clk, + &clks4_clk, + &clkb_clk, + &clkout_clk, + &clkp_clk, + &clkg_clk, };enum {MSTP323 ,MSTP322 ,MSTP321 ,MSTP320 ,
@@ -96,52 +102,28 @@ enum { MSTP323, MSTP322, MSTP321, MSTP320, MSTP_NR };static struct clk mstp_clks[MSTP_NR ] = { - [MSTP323 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR3 ,23 ,0 ),/* SDHI0 */ - [MSTP322 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR3 ,22 ,0 ),/* SDHI1 */ - [MSTP321 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR3 ,21 ,0 ),/* SDHI2 */ - [MSTP320 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR3 ,20 ,0 ),/* SDHI3 */ - [MSTP115 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR1 ,15 ,0 ),/* SATA */ - [MSTP103 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_S ],MSTPCR1 ,3 ,0 ),/* DU */ - [MSTP101 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR1 ,1 ,0 ),/* USB2 */ - [MSTP100 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR1 ,0 ,0 ),/* USB0/1 */ - [MSTP030 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,30 ,0 ),/* I2C0 */ - [MSTP029 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,29 ,0 ),/* I2C1 */ - [MSTP028 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,28 ,0 ),/* I2C2 */ - [MSTP027 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,27 ,0 ),/* I2C3 */ - [MSTP026 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,26 ,0 ),/* SCIF0 */ - [MSTP025 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,25 ,0 ),/* SCIF1 */ - [MSTP024 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,24 ,0 ),/* SCIF2 */ - [MSTP023 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,23 ,0 ),/* SCIF3 */ - [MSTP022 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,22 ,0 ),/* SCIF4 */ - [MSTP021 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,21 ,0 ),/* SCIF5 */ - [MSTP016 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,16 ,0 ),/* TMU0 */ - [MSTP015 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,15 ,0 ),/* TMU1 */ - [MSTP014 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_P ],MSTPCR0 ,14 ,0 ),/* TMU2 */ - [MSTP007 ] =SH_CLK_MSTP32 (&div4_clks[DIV4_S ],MSTPCR0 ,7 ,0 ),/* HSPI */ -}; - -static unsigned long mul4_recalc (struct clk *clk) -{ -return clk->parent->rate *4 ; -} - -static struct sh_clk_ops mul4_clk_ops = { - .recalc = mul4_recalc, -}; - -struct clk clkz_clk = { - .ops = &mul4_clk_ops, - .parent = &div4_clks[DIV4_S ], -}; - -struct clk clkzs_clk = { -/* clks x 4 / 4 = clks */ - .parent = &div4_clks[DIV4_S ], -}; - -static struct clk *late_main_clks[] = { - &clkz_clk, - &clkzs_clk, + [MSTP323 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR3 ,23 ,0 ),/* SDHI0 */ + [MSTP322 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR3 ,22 ,0 ),/* SDHI1 */ + [MSTP321 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR3 ,21 ,0 ),/* SDHI2 */ + [MSTP320 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR3 ,20 ,0 ),/* SDHI3 */ + [MSTP115 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR1 ,15 ,0 ),/* SATA */ + [MSTP103 ] =SH_CLK_MSTP32 (&clks_clk,MSTPCR1 ,3 ,0 ),/* DU */ + [MSTP101 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR1 ,1 ,0 ),/* USB2 */ + [MSTP100 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR1 ,0 ,0 ),/* USB0/1 */ + [MSTP030 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,30 ,0 ),/* I2C0 */ + [MSTP029 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,29 ,0 ),/* I2C1 */ + [MSTP028 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,28 ,0 ),/* I2C2 */ + [MSTP027 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,27 ,0 ),/* I2C3 */ + [MSTP026 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,26 ,0 ),/* SCIF0 */ + [MSTP025 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,25 ,0 ),/* SCIF1 */ + [MSTP024 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,24 ,0 ),/* SCIF2 */ + [MSTP023 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,23 ,0 ),/* SCIF3 */ + [MSTP022 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,22 ,0 ),/* SCIF4 */ + [MSTP021 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,21 ,0 ),/* SCIF5 */ + [MSTP016 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,16 ,0 ),/* TMU0 */ + [MSTP015 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,15 ,0 ),/* TMU1 */ + [MSTP014 ] =SH_CLK_MSTP32 (&clkp_clk,MSTPCR0 ,14 ,0 ),/* TMU2 */ + [MSTP007 ] =SH_CLK_MSTP32 (&clks_clk,MSTPCR0 ,7 ,0 ),/* HSPI */ };static struct clk_lookup lookups[] = {
@@ -151,12 +133,12 @@ static struct clk_lookup lookups[] = {CLKDEV_CON_ID ("clkzs_clk" , &clkzs_clk),/* DIV4 clocks */ -CLKDEV_CON_ID ("shyway_clk" , &div4_clks[DIV4_S ]), -CLKDEV_CON_ID ("bus_clk" , &div4_clks[DIV4_OUT ]), -CLKDEV_CON_ID ("shyway4_clk" , &div4_clks[DIV4_S4 ]), -CLKDEV_CON_ID ("shyway3_clk" , &div4_clks[DIV4_S3 ]), -CLKDEV_CON_ID ("shyway1_clk" , &div4_clks[DIV4_S1 ]), -CLKDEV_CON_ID ("peripheral_clk" , &div4_clks[DIV4_P ]), +CLKDEV_CON_ID ("shyway_clk" , &clks_clk), +CLKDEV_CON_ID ("bus_clk" , &clkout_clk), +CLKDEV_CON_ID ("shyway4_clk" , &clks4_clk), +CLKDEV_CON_ID ("shyway3_clk" , &clks3_clk), +CLKDEV_CON_ID ("shyway1_clk" , &clks1_clk), +CLKDEV_CON_ID ("peripheral_clk" , &clkp_clk),/* MSTP32 clocks */ CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
@@ -190,20 +172,60 @@ static struct clk_lookup lookups[] = {void __init r8a7779_clock_init (void ) { +void __iomem *modemr =ioremap_nocache (MODEMR ,PAGE_SIZE ); +u32 mode;int k, ret =0 ; +BUG_ON (!modemr); + mode =ioread32 (modemr); +iounmap (modemr); + +if (mode &MD (1 )) { + plla_clk.rate =1500000000 ; + +SH_CLK_SET_RATIO (&clkz_clk_ratio,2 ,3 ); +SH_CLK_SET_RATIO (&clkzs_clk_ratio,1 ,6 ); +SH_CLK_SET_RATIO (&clki_clk_ratio,1 ,2 ); +SH_CLK_SET_RATIO (&clks_clk_ratio,1 ,6 ); +SH_CLK_SET_RATIO (&clks1_clk_ratio,1 ,12 ); +SH_CLK_SET_RATIO (&clks3_clk_ratio,1 ,8 ); +SH_CLK_SET_RATIO (&clks4_clk_ratio,1 ,16 ); +SH_CLK_SET_RATIO (&clkp_clk_ratio,1 ,24 ); +SH_CLK_SET_RATIO (&clkg_clk_ratio,1 ,24 ); +if (mode &MD (2 )) { +SH_CLK_SET_RATIO (&clkb_clk_ratio,1 ,36 ); +SH_CLK_SET_RATIO (&clkout_clk_ratio,1 ,36 ); + }else { +SH_CLK_SET_RATIO (&clkb_clk_ratio,1 ,24 ); +SH_CLK_SET_RATIO (&clkout_clk_ratio,1 ,24 ); + } + }else { + plla_clk.rate =1600000000 ; + +SH_CLK_SET_RATIO (&clkz_clk_ratio,1 ,2 ); +SH_CLK_SET_RATIO (&clkzs_clk_ratio,1 ,8 ); +SH_CLK_SET_RATIO (&clki_clk_ratio,1 ,2 ); +SH_CLK_SET_RATIO (&clks_clk_ratio,1 ,8 ); +SH_CLK_SET_RATIO (&clks1_clk_ratio,1 ,16 ); +SH_CLK_SET_RATIO (&clks3_clk_ratio,1 ,8 ); +SH_CLK_SET_RATIO (&clks4_clk_ratio,1 ,16 ); +SH_CLK_SET_RATIO (&clkp_clk_ratio,1 ,32 ); +SH_CLK_SET_RATIO (&clkg_clk_ratio,1 ,24 ); +if (mode &MD (2 )) { +SH_CLK_SET_RATIO (&clkb_clk_ratio,1 ,32 ); +SH_CLK_SET_RATIO (&clkout_clk_ratio,1 ,32 ); + }else { +SH_CLK_SET_RATIO (&clkb_clk_ratio,1 ,24 ); +SH_CLK_SET_RATIO (&clkout_clk_ratio,1 ,24 ); + } + } +for (k =0 ; !ret && (k <ARRAY_SIZE (main_clks)); k++) ret =clk_register (main_clks[k]);if (!ret) - ret =sh_clk_div4_register (div4_clks,DIV4_NR , &div4_table); - -if (!ret) ret =sh_clk_mstp_register (mstp_clks,MSTP_NR ); -for (k =0 ; !ret && (k <ARRAY_SIZE (late_main_clks)); k++) - ret =clk_register (late_main_clks[k]); -clkdev_add_table (lookups,ARRAY_SIZE (lookups));if (!ret)
Signature · 1 line
1.7.10.4
PATCH 21/30 ARM: shmobile: sh7372: move global functions to sh7372.h
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
There is no reason each CPU's own function has to exist in common.h. sh7372_xxx() go to sh7372.h
--- arch/arm/mach-shmobile/include/mach/common.h | 15 --------------- arch/arm/mach-shmobile/include/mach/sh7372.h | 12 ++++++++++++ 2 files changed, 12 insertions(+), 15 deletions(-)
arch/arm/mach-shmobile/include/mach/common.h +0 -15
@@ -19,21 +19,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index);extern void shmobile_cpuidle_set_driver (struct cpuidle_driver *drv); -extern void sh7372_init_irq (void ); -extern void sh7372_map_io (void ); -extern void sh7372_earlytimer_init (void ); -extern void sh7372_add_early_devices (void ); -extern void sh7372_add_standard_devices (void ); -extern void sh7372_add_early_devices_dt (void ); -extern void sh7372_add_standard_devices_dt (void ); -extern void sh7372_clock_init (void ); -extern void sh7372_pinmux_init (void ); -extern void sh7372_pm_init (void ); -extern void sh7372_resume_core_standby_sysc (void ); -extern int sh7372_do_idle_sysc (unsigned long sleep_mode); -extern struct clk sh7372_extal1_clk; -extern struct clk sh7372_extal2_clk; -extern void sh73a0_init_delay (void );extern void sh73a0_init_irq (void );extern void sh73a0_init_irq_dt (void );
arch/arm/mach-shmobile/include/mach/sh7372.h +12 -0
@@ -478,6 +478,18 @@ extern struct clk sh7372_dv_clki_clk;extern struct clk sh7372_dv_clki_div2_clk;extern struct clk sh7372_pllc2_clk; +extern void sh7372_init_irq (void ); +extern void sh7372_map_io (void ); +extern void sh7372_earlytimer_init (void ); +extern void sh7372_add_early_devices (void ); +extern void sh7372_add_standard_devices (void ); +extern void sh7372_add_early_devices_dt (void ); +extern void sh7372_add_standard_devices_dt (void ); +extern void sh7372_clock_init (void ); +extern void sh7372_pinmux_init (void ); +extern void sh7372_pm_init (void ); +extern void sh7372_resume_core_standby_sysc (void ); +extern int sh7372_do_idle_sysc (unsigned long sleep_mode);extern void sh7372_intcs_suspend (void );extern void sh7372_intcs_resume (void );extern void sh7372_intca_suspend (void );
Signature · 1 line
1.7.10.4
PATCH 22/30 ARM: shmobile: sh73a0: move global functions to sh73a0.h
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
There is no reason each CPU's own function has to exist in common.h. sh73a0_xxx() go to sh73a0.h
--- arch/arm/mach-shmobile/include/mach/common.h | 16 ---------------- arch/arm/mach-shmobile/include/mach/sh73a0.h | 15 +++++++++++++++ 2 files changed, 15 insertions(+), 16 deletions(-)
arch/arm/mach-shmobile/include/mach/common.h +0 -16
@@ -19,22 +19,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index);extern void shmobile_cpuidle_set_driver (struct cpuidle_driver *drv); -extern void sh73a0_init_delay (void ); -extern void sh73a0_init_irq (void ); -extern void sh73a0_init_irq_dt (void ); -extern void sh73a0_map_io (void ); -extern void sh73a0_earlytimer_init (void ); -extern void sh73a0_add_early_devices (void ); -extern void sh73a0_add_standard_devices (void ); -extern void sh73a0_add_standard_devices_dt (void ); -extern void sh73a0_clock_init (void ); -extern void sh73a0_pinmux_init (void ); -extern void sh73a0_pm_init (void ); -extern struct clk sh73a0_extal1_clk; -extern struct clk sh73a0_extal2_clk; -extern struct clk sh73a0_extcki_clk; -extern struct clk sh73a0_extalr_clk; -extern void r8a7740_meram_workaround (void );extern void r8a7740_init_irq (void );extern void r8a7740_map_io (void );
arch/arm/mach-shmobile/include/mach/sh73a0.h +15 -0
@@ -557,6 +557,21 @@ enum {#define SH73A0_PINT0_IRQ (irq) ((irq) + 700)#define SH73A0_PINT1_IRQ (irq) ((irq) + 732) +extern void sh73a0_init_delay (void ); +extern void sh73a0_init_irq (void ); +extern void sh73a0_init_irq_dt (void ); +extern void sh73a0_map_io (void ); +extern void sh73a0_earlytimer_init (void ); +extern void sh73a0_add_early_devices (void ); +extern void sh73a0_add_standard_devices (void ); +extern void sh73a0_add_standard_devices_dt (void ); +extern void sh73a0_clock_init (void ); +extern void sh73a0_pinmux_init (void ); +extern void sh73a0_pm_init (void ); +extern struct clk sh73a0_extal1_clk; +extern struct clk sh73a0_extal2_clk; +extern struct clk sh73a0_extcki_clk; +extern struct clk sh73a0_extalr_clk;extern struct smp_operations sh73a0_smp_ops;#endif /* __ASM_SH73A0_H__ */
Signature · 1 line
1.7.10.4
PATCH 23/30 ARM: shmobile: r8a7740: move global functions to r8a7740.h
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
There is no reason each CPU's own function has to exist in common.h. r8a7740_xxx() go to r8a7740.h
--- arch/arm/mach-shmobile/include/mach/common.h | 9 --------- arch/arm/mach-shmobile/include/mach/r8a7740.h | 9 +++++++++ 2 files changed, 9 insertions(+), 9 deletions(-)
arch/arm/mach-shmobile/include/mach/common.h +0 -9
@@ -19,15 +19,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index);extern void shmobile_cpuidle_set_driver (struct cpuidle_driver *drv); -extern void r8a7740_meram_workaround (void ); -extern void r8a7740_init_irq (void ); -extern void r8a7740_map_io (void ); -extern void r8a7740_add_early_devices (void ); -extern void r8a7740_add_standard_devices (void ); -extern void r8a7740_clock_init (u8 md_ck); -extern void r8a7740_pinmux_init (void ); -extern void r8a7740_pm_init (void ); -extern void r8a7779_init_delay (void );extern void r8a7779_init_irq (void );extern void r8a7779_init_irq_extpin (int irlm);
arch/arm/mach-shmobile/include/mach/r8a7740.h +9 -0
@@ -606,6 +606,15 @@ enum { SHDMA_SLAVE_USBHS_RX, }; +extern void r8a7740_meram_workaround (void ); +extern void r8a7740_init_irq (void ); +extern void r8a7740_map_io (void ); +extern void r8a7740_add_early_devices (void ); +extern void r8a7740_add_standard_devices (void ); +extern void r8a7740_clock_init (u8 md_ck); +extern void r8a7740_pinmux_init (void ); +extern void r8a7740_pm_init (void ); +#ifdef CONFIG_PM extern void __init r8a7740_init_pm_domains (void );#else
Signature · 1 line
1.7.10.4
PATCH 24/30 ARM: shmobile: r8a7779: move global functions to r8a7779.h
In reply to Simon HormanFrom: Kuninori Morimoto <[email protected]>
There is no reason each CPU's own function has to exist in common.h. r8a7779_xxx() go to r8a7779.h
--- arch/arm/mach-shmobile/include/mach/common.h | 14 -------------- arch/arm/mach-shmobile/include/mach/r8a7779.h | 13 +++++++++++++ 2 files changed, 13 insertions(+), 14 deletions(-)
arch/arm/mach-shmobile/include/mach/common.h +0 -14
@@ -19,20 +19,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index);extern void shmobile_cpuidle_set_driver (struct cpuidle_driver *drv); -extern void r8a7779_init_delay (void ); -extern void r8a7779_init_irq (void ); -extern void r8a7779_init_irq_extpin (int irlm); -extern void r8a7779_init_irq_dt (void ); -extern void r8a7779_map_io (void ); -extern void r8a7779_earlytimer_init (void ); -extern void r8a7779_add_early_devices (void ); -extern void r8a7779_add_standard_devices (void ); -extern void r8a7779_add_standard_devices_dt (void ); -extern void r8a7779_clock_init (void ); -extern void r8a7779_pinmux_init (void ); -extern void r8a7779_pm_init (void ); -extern void r8a7779_register_twd (void ); -#ifdef CONFIG_SUSPEND int shmobile_suspend_init (void );#else
arch/arm/mach-shmobile/include/mach/r8a7779.h +13 -0
@@ -343,6 +343,19 @@ static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d) return &container_of(d, struct r8a7779_pm_domain, genpd)->ch; } +extern void r8a7779_init_delay (void ); +extern void r8a7779_init_irq (void ); +extern void r8a7779_init_irq_extpin (int irlm); +extern void r8a7779_init_irq_dt (void ); +extern void r8a7779_map_io (void ); +extern void r8a7779_earlytimer_init (void ); +extern void r8a7779_add_early_devices (void ); +extern void r8a7779_add_standard_devices (void ); +extern void r8a7779_add_standard_devices_dt (void ); +extern void r8a7779_clock_init (void ); +extern void r8a7779_pinmux_init (void ); +extern void r8a7779_pm_init (void ); +extern void r8a7779_register_twd (void );extern int r8a7779_sysc_power_down (struct r8a7779_pm_ch *r8a7779_ch);extern int r8a7779_sysc_power_up (struct r8a7779_pm_ch *r8a7779_ch);
Signature · 1 line
1.7.10.4
PATCH 25/30 ARM: shmobile: Initial r8a7790 SoC support
In reply to Simon HormanFrom: Magnus Damm <[email protected]>
Add initial support for the r8a7790 SoC including:
- Single Cortex-A15 CPU Core
- GIC
- Architecture timer
No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code.
--- arch/arm/boot/dts/r8a7790.dtsi | 54 ++++++++++++++++++++++ arch/arm/mach-shmobile/Kconfig | 7 +++ arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/clock-r8a7790.c | 61 +++++++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/r8a7790.h | 7 +++ arch/arm/mach-shmobile/setup-r8a7790.c | 51 +++++++++++++++++++++ 6 files changed, 181 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7790.dtsi create mode 100644 arch/arm/mach-shmobile/clock-r8a7790.c create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7790.h create mode 100644 arch/arm/mach-shmobile/setup-r8a7790.c
arch/arm/boot/dts/r8a7790.dtsi new file +54 -0
@@ -0,0 +1,54 @@ +/* + * Device Tree Source for the r8a7790 SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,r8a7790"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1300000000>; + }; + }; + + gic: interrupt-controller at f1001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xf1001000 0x1000>, + <0xf1002000 0x1000>, + <0xf1004000 0x2000>, + <0xf1006000 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif at 4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu0>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; +};
arch/arm/mach-shmobile/Kconfig +7 -0
@@ -51,6 +51,13 @@ config ARCH_R8A7779 select USB_ARCH_HAS_OHCI select RENESAS_INTC_IRQPIN +config ARCH_R8A7790 + bool "R-Car H2 (R8A77900)" + select ARM_GIC + select CPU_V7 + select ARM_ARCH_TIMER + select SH_CLK_CPG + config ARCH_EMEV2 bool "Emma Mobile EV2" select ARCH_WANT_OPTIONAL_GPIOLIB
arch/arm/mach-shmobile/Makefile +1 -0
@@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o # SMP objects
arch/arm/mach-shmobile/clock-r8a7790.c new file +61 -0
61 lines not on this page · raw message
arch/arm/mach-shmobile/include/mach/r8a7790.h new file +7 -0
@@ -0,0 +1,7 @@ +#ifndef __ASM_R8A7790_H__ +#define __ASM_R8A7790_H__ + +void r8a7790_add_standard_devices (void ); +void r8a7790_clock_init (void ); + +#endif /* __ASM_R8A7790_H__ */
arch/arm/mach-shmobile/setup-r8a7790.c new file +51 -0
51 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 26/30 ARM: shmobile: r8a7790 SCIF support
In reply to Simon HormanFrom: Magnus Damm <[email protected]>
Add SCIF serial port support to the r8a7790 SoC by adding platform devices for SCIFA0 -> SCIFA2 as well as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF1 together with clock bindings. DT device description is excluded at this point since such bindings are still under development.
--- arch/arm/mach-shmobile/clock-r8a7790.c | 34 +++++++++++++++++++- arch/arm/mach-shmobile/setup-r8a7790.c | 55 ++++++++++++++++++++++++++++++++ 2 files changed, 88 insertions(+), 1 deletion(-)
arch/arm/mach-shmobile/clock-r8a7790.c +33 -1
@@ -27,19 +27,51 @@#define CPG_BASE 0xe6150000#define CPG_LEN 0x1000 +#define SMSTPCR2 0xe6150138 +#define SMSTPCR7 0xe615014c +static struct clk_mapping cpg_mapping = { .phys =CPG_BASE , .len =CPG_LEN , }; +static struct clk p_clk = { + .rate =65000000 ,/* shortcut for now */ + .mapping = &cpg_mapping, +}; + +static struct clk mp_clk = { + .rate =52000000 ,/* shortcut for now */ + .mapping = &cpg_mapping, +}; +static struct clk *main_clks[] = { + &p_clk, + &mp_clk, }; -enum {MSTP_NR }; +enum {MSTP721 ,MSTP720 , +MSTP216 ,MSTP207 ,MSTP206 ,MSTP204 ,MSTP203 ,MSTP202 ,MSTP_NR };static struct clk mstp_clks[MSTP_NR ] = { + [MSTP721 ] =SH_CLK_MSTP32 (&p_clk,SMSTPCR7 ,21 ,0 ),/* SCIF0 */ + [MSTP720 ] =SH_CLK_MSTP32 (&p_clk,SMSTPCR7 ,20 ,0 ),/* SCIF1 */ + [MSTP216 ] =SH_CLK_MSTP32 (&mp_clk,SMSTPCR2 ,16 ,0 ),/* SCIFB2 */ + [MSTP207 ] =SH_CLK_MSTP32 (&mp_clk,SMSTPCR2 ,7 ,0 ),/* SCIFB1 */ + [MSTP206 ] =SH_CLK_MSTP32 (&mp_clk,SMSTPCR2 ,6 ,0 ),/* SCIFB0 */ + [MSTP204 ] =SH_CLK_MSTP32 (&mp_clk,SMSTPCR2 ,4 ,0 ),/* SCIFA0 */ + [MSTP203 ] =SH_CLK_MSTP32 (&mp_clk,SMSTPCR2 ,3 ,0 ),/* SCIFA1 */ + [MSTP202 ] =SH_CLK_MSTP32 (&mp_clk,SMSTPCR2 ,2 ,0 ),/* SCIFA2 */ };static struct clk_lookup lookups[] = { +CLKDEV_DEV_ID ("sh-sci.0" , &mstp_clks[MSTP204 ]), +CLKDEV_DEV_ID ("sh-sci.1" , &mstp_clks[MSTP203 ]), +CLKDEV_DEV_ID ("sh-sci.2" , &mstp_clks[MSTP206 ]), +CLKDEV_DEV_ID ("sh-sci.3" , &mstp_clks[MSTP207 ]), +CLKDEV_DEV_ID ("sh-sci.4" , &mstp_clks[MSTP216 ]), +CLKDEV_DEV_ID ("sh-sci.5" , &mstp_clks[MSTP202 ]), +CLKDEV_DEV_ID ("sh-sci.6" , &mstp_clks[MSTP721 ]), +CLKDEV_DEV_ID ("sh-sci.7" , &mstp_clks[MSTP720 ]), };void __init r8a7790_clock_init (void )
arch/arm/mach-shmobile/setup-r8a7790.c +55 -0
68 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 27/30 ARM: shmobile: r8a7790 IRQC support
In reply to Simon HormanFrom: Magnus Damm <[email protected]>
Add IRQC interrupt controller support to r8a7790 by hooking up a single IRQC instances to handle 4 external IRQ signals. The IRQC controller is tied to SPIs of the GIC. On r8a7790 the external IRQ pins routing is handled by the PFC which is excluded from this patch.
Both platform devices and DT devices are added in this patch. The platform device versions are used to provide a static interrupt map configuration for board code written in C.
--- arch/arm/boot/dts/r8a7790.dtsi | 9 +++++++++ arch/arm/mach-shmobile/Kconfig | 1 + arch/arm/mach-shmobile/setup-r8a7790.c | 21 +++++++++++++++++++++ 3 files changed, 31 insertions(+)
arch/arm/boot/dts/r8a7790.dtsi +9 -0
@@ -51,4 +51,13 @@ <1 11 0xf08>, <1 10 0xf08>; }; + + irqc0: interrupt-controller at e61c0000 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe61c0000 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; + }; };
arch/arm/mach-shmobile/Kconfig +1 -0
@@ -57,6 +57,7 @@ config ARCH_R8A7790 select CPU_V7 select ARM_ARCH_TIMER select SH_CLK_CPG + select RENESAS_IRQC config ARCH_EMEV2 bool "Emma Mobile EV2"
arch/arm/mach-shmobile/setup-r8a7790.c +21 -0
@@ -23,6 +23,7 @@#include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/serial_sci.h> +#include <linux/platform_data/irq-renesas-irqc.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a7790.h>
@@ -74,6 +75,25 @@ static inline void r8a7790_register_scif(int idx) sizeof(struct plat_sci_port)); } +static struct renesas_irqc_config irqc0_data = { + .irq_base =irq_pin (0 ),/* IRQ0 -> IRQ3 */ +}; + +static struct resource irqc0_resources[] = { +DEFINE_RES_MEM (0xe61c0000 ,0x200 ),/* IRQC Event Detector Block_0 */ +DEFINE_RES_IRQ (gic_spi (0 )),/* IRQ0 */ +DEFINE_RES_IRQ (gic_spi (1 )),/* IRQ1 */ +DEFINE_RES_IRQ (gic_spi (2 )),/* IRQ2 */ +DEFINE_RES_IRQ (gic_spi (3 )),/* IRQ3 */ +}; + +#define r8a7790_register_irqc (idx) \ + platform_device_register_resndata(&platform_bus, "renesas_irqc", \ + idx, irqc##idx##_resources, \ + ARRAY_SIZE(irqc##idx##_resources), \ + &irqc##idx##_data, \ + sizeof(struct renesas_irqc_config)) +void __init r8a7790_add_standard_devices (void ) {r8a7790_register_scif (SCIFA0 );
@@ -84,6 +104,7 @@ void __init r8a7790_add_standard_devices(void)r8a7790_register_scif (SCIFA2 );r8a7790_register_scif (SCIF0 );r8a7790_register_scif (SCIF1 ); +r8a7790_register_irqc (0 ); }#ifdef CONFIG_USE_OF
Signature · 1 line
1.7.10.4
PATCH 28/30 ARM: shmobile: r8a7790 PFC support
In reply to Simon HormanFrom: Magnus Damm <[email protected]>
Add a platform device for the r8a7790 PFC.
--- arch/arm/mach-shmobile/Kconfig | 1 + arch/arm/mach-shmobile/include/mach/r8a7790.h | 1 + arch/arm/mach-shmobile/setup-r8a7790.c | 10 ++++++++++ 3 files changed, 12 insertions(+)
arch/arm/mach-shmobile/Kconfig +1 -0
@@ -53,6 +53,7 @@ config ARCH_R8A7779 config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" + select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 select ARM_ARCH_TIMER
arch/arm/mach-shmobile/include/mach/r8a7790.h +1 -0
@@ -3,5 +3,6 @@void r8a7790_add_standard_devices (void );void r8a7790_clock_init (void ); +void r8a7790_pinmux_init (void );#endif /* __ASM_R8A7790_H__ */
arch/arm/mach-shmobile/setup-r8a7790.c +10 -0
@@ -29,6 +29,16 @@#include <mach/r8a7790.h> #include <asm/mach/arch.h> +static const struct resource pfc_resources[] = { +DEFINE_RES_MEM (0xe6060000 ,0x250 ), +}; + +void __init r8a7790_pinmux_init (void ) +{ +platform_device_register_simple ("pfc-r8a7790" ,-1 , pfc_resources, +ARRAY_SIZE (pfc_resources)); +} +#define SCIF_COMMON (scif_type, baseaddr, irq) \ .type = scif_type, \ .mapbase = baseaddr, \
Signature · 1 line
1.7.10.4
PATCH 29/30 ARM: shmobile: r8a73a4 SoC 64-bit DT support
In reply to Simon HormanFrom: Takashi Yoshii <[email protected]>
The r8a73a4 SoC supports LPAE and has memory window up to 0x2ffffffff. Convert to 64-bit addresses by enlarging #addr-cells and #size-cells to 2.
--- arch/arm/boot/dts/r8a73a4.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
arch/arm/boot/dts/r8a73a4.dtsi +10 -10
@@ -9,11 +9,11 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - / { compatible = "renesas,r8a73a4"; interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; cpus { #address-cells = <1>;
@@ -32,10 +32,10 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0xf1001000 0x1000>, - <0xf1002000 0x1000>, - <0xf1004000 0x2000>, - <0xf1006000 0x2000>; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; interrupts = <1 9 0xf04>; gic-cpuif at 4 {
@@ -57,7 +57,7 @@ compatible = "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; - reg = <0xe61c0000 0x200>; + reg = <0 0xe61c0000 0 0x200>; interrupt-parent = <&gic>; interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>, <0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>,
@@ -73,7 +73,7 @@ compatible = "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; - reg = <0xe61c0200 0x200>; + reg = <0 0xe61c0200 0 0x200>; interrupt-parent = <&gic>; interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>, <0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>,
@@ -86,8 +86,8 @@ thermal at e61f0000 { compatible = "renesas,rcar-thermal"; - reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>, - <0xe61f0200 0x38>, <0xe61f0300 0x38>; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, + <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; interrupt-parent = <&gic>; interrupts = <0 69 4>; };
Signature · 1 line
1.7.10.4
PATCH 30/30 ARM: shmobile: r8a7790 SoC 64-bit DT support
In reply to Simon HormanFrom: Takashi Yoshii <[email protected]>
The r8a7790 SoC supports LPAE and has memory window up to 0x2ffffffff. Convert to 64-bit addresses by enlarging #addr-cells and #size-cells to 2.
--- arch/arm/boot/dts/r8a7790.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
arch/arm/boot/dts/r8a7790.dtsi +7 -7
@@ -8,11 +8,11 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - / { compatible = "renesas,r8a7790"; interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; cpus { #address-cells = <1>;
@@ -31,10 +31,10 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0xf1001000 0x1000>, - <0xf1002000 0x1000>, - <0xf1004000 0x2000>, - <0xf1006000 0x2000>; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; interrupts = <1 9 0xf04>; gic-cpuif at 4 {
@@ -56,7 +56,7 @@ compatible = "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; - reg = <0xe61c0000 0x200>; + reg = <0 0xe61c0000 0 0x200>; interrupt-parent = <&gic>; interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; };
Signature · 1 line
1.7.10.4
Quoted 27 lines · Simon Horman
Hi Arnd, Hi Olof,
The following changes since commit
4c82e452732784419fd616cf1acf2bc9b004aae1:Merge tag 'renesas-intc-external-irq2-for-v3.10' into soc-base (2013-04-02 10:55:57 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.gittags/renesas-soc2-for-v3.10for you to fetch changes up to
8585deb18580d04209a2986430aa0959ef38fce2:ARM: shmobile: r8a7790 SoC 64-bit DT support (2013-04-02 11:02:21 +0900)
----------------------------------------------------------------
Second round of Renesas ARM SoC updates for v3.10Some Highlights:
* Add r8a7790 SoC
* Add r8a73a4 SoC
* Migrate r8a7740 SoC from INTC to GIC
* Add thermal driver support to r8a73a4 SoC
* Add irqpin DT nodes to sh73a0 SoC
* Add SCIF support to r8a7778 SoC
Quoted 3 lines
This pull request is based on a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesasrenesas-soc-for-v3.10git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesasrenesas-intc-external-irq2-for-v3.10
Ugh. So, the irq branch depends on the old soc branch, and now this depends on the irq branch (and it is soc code). That's a circular dependency.
I'll add this as a next/soc2 branch in arm-soc, but please think about these kind of circular dependencies in the future, and try to avoid them if you can by splitting the branch contents in separate topics if possible.
Likewise, there's a bunch of patches in this branch such as the fixed divisor clock patches that could be considered cleanup. Not a big deal to group them with the soc code, but if you're already doing cleanup branches it'd be just as well to put them in those.
-Olof
Quoted 32 lines · Olof Johansson
Quoted 27 lines · Simon Horman
Hi Arnd, Hi Olof,
The following changes since commit
4c82e452732784419fd616cf1acf2bc9b004aae1:Merge tag 'renesas-intc-external-irq2-for-v3.10' into soc-base (2013-04-02 10:55:57 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.gittags/renesas-soc2-for-v3.10for you to fetch changes up to
8585deb18580d04209a2986430aa0959ef38fce2:ARM: shmobile: r8a7790 SoC 64-bit DT support (2013-04-02 11:02:21 +0900)
----------------------------------------------------------------
Second round of Renesas ARM SoC updates for v3.10Some Highlights:
* Add r8a7790 SoC
* Add r8a73a4 SoC
* Migrate r8a7740 SoC from INTC to GIC
* Add thermal driver support to r8a73a4 SoC
* Add irqpin DT nodes to sh73a0 SoC
* Add SCIF support to r8a7778 SoCQuoted 3 lines
This pull request is based on a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesasrenesas-soc-for-v3.10git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesasrenesas-intc-external-irq2-for-v3.10
Quoted 6 lines
Ugh. So, the irq branch depends on the old soc branch, and now this depends on the irq branch (and it is soc code). That's a circular dependency.
I'll add this as a next/soc2 branch in arm-soc, but please think about these kind of circular dependencies in the future, and try to avoid them if you can by splitting the branch contents in separate topics if possible.
Sorry about that. I have been having a bit of trouble managing the dependencies and some assumptions I made with earlier branches turned out to be invalid as new patches came in. I'll try to be more careful in future.
Quoted 4 lines
Likewise, there's a bunch of patches in this branch such as the fixed divisor clock patches that could be considered cleanup. Not a big deal to group them with the soc code, but if you're already doing cleanup branches it'd be just as well to put them in those.
I'm not carrying any cleanup branches at this time. I will keep in in mind for future patches of this nature.