Skip to contentSkip to conversation

ARM: kirkwood: extend the kirkwood i2s driver for DT usage

PATCH Superseded Jean-Francois Moine 2 participants 2 messages Apr 2, 2013

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ARM: kirkwood: extend the kirkwood i2s driver for DT usage

The kirkwood i2s driver is used without DT in the Kirkwood machine. This patch adds a DT compatible definition for use in other Marvell machines as the Armada 88AP510 (Dove).

---
v2
- this patch replaces the previous
[PATCH 2/2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage
- 2 possible clocks (Sebastian Hesselbarth)
- shorter io mapping (Andrew Lunn)
- less #ifdef's

---
 .../devicetree/bindings/sound/kirkwood-i2s.txt     |   26 +++++++++
 sound/soc/kirkwood/kirkwood-i2s.c                  |   58 +++++++++++++++-----
 2 files changed, 70 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/kirkwood-i2s.txt
Documentation/devicetree/bindings/sound/kirkwood-i2s.txt new file +26 -0
new file mode 100644
index 0000000..d1caa59
@@ -0,0 +1,26 @@
+* Kirkwood I2S controller
+
+Required properties:
+
+- compatible: "marvell,kirkwood-i2s"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: list of two irq numbers.
+  The first irq is used for data flow and the second one is used for errors.
+- clocks: one or two phandles.
+  The first one is mandatory and defines the internal clock.
+  The second one is optional and defines an external clock.
+
+Optional property:
+
+- marvell,burst-size: burst size which can be only 32 or 128.
+  Default value is 128.
+
+Example:
+
+i2s1: audio-controller at b4000 {
+	compatible = "marvell,kirkwood-i2s";
+	reg = <0xb4000 0x2210>;
+	interrupts = <21>, <22>;
+	clocks = <&gate_clk 13>;
+};
sound/soc/kirkwood/kirkwood-i2s.c +43 -13

121 lines not on this page · raw message

Signature · 7 lines
1.7.10.4



-- 
Ken ar c'henta?	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
#1 lore raw

PATCH v2 1/1 ARM: kirkwood: extend the kirkwood i2s driver for DT usage

Quoted 6 lines · Jean-Francois Moine

The kirkwood i2s driver is used without DT in the Kirkwood machine. This patch adds a DT compatible definition for use in other Marvell machines as the Armada 88AP510 (Dove).

---

[...]

Documentation/devicetree/bindings/sound/kirkwood-i2s.txt line 17

Quoted 4 lines
Documentation/devicetree/bindings/sound/kirkwood-i2s.txt new file +4 -0
+Optional property:
+
+- marvell,burst-size: burst size which can be only 32 or 128.
+  Default value is 128.

Jean-Francois,

I still think we don't need to expose burst-size at all. Is there any SoC using a different burst-size of 128?

Quoted 31 lines
Documentation/devicetree/bindings/sound/kirkwood-i2s.txt new file +9 -0
+
+Example:
+
+i2s1: audio-controller at b4000 {
+	compatible = "marvell,kirkwood-i2s";
+	reg =<0xb4000 0x2210>;
+	interrupts =<21>,<22>;
+	clocks =<&gate_clk 13>;
+};
sound/soc/kirkwood/kirkwood-i2s.c +2 -1
index c74c890..37370b3 100644
@@ -12,7 +12,6 @@
 
  #include<linux/init.h>
  #include<linux/module.h>
-#include<linux/platform_device.h>
  #include<linux/io.h>
  #include<linux/slab.h>
  #include<linux/mbus.h>
@@ -22,6 +21,8 @@
  #include<sound/pcm_params.h>
  #include<sound/soc.h>
  #include<linux/platform_data/asoc-kirkwood.h>
+#include<linux/of.h>
+
  #include "kirkwood.h"
 
  #define DRV_NAME	"kirkwood-i2s"

sound/soc/kirkwood/kirkwood-i2s.c static int kirkwood_i2s_dev_probe(struct platform_device *pdev) · line 461

Quoted 4 lines
sound/soc/kirkwood/kirkwood-i2s.c +1 -0
@@ -457,6 +458,7 @@ static int kirkwood_i2s_dev_probe(struct platform_device *pdev)
  	struct snd_soc_dai_driver *soc_dai =&kirkwood_i2s_dai;
  	struct kirkwood_dma_data *priv;
  	struct resource *mem;
+	struct device_node *np;

struct device_node *np = pdev->dev.of_node;

and remove the assignment below.

Quoted 86 lines
sound/soc/kirkwood/kirkwood-i2s.c +31 -12
  	int err;
 
  	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -482,24 +484,41 @@ static int kirkwood_i2s_dev_probe(struct platform_device *pdev)
  		return -ENXIO;
  	}
 
-	if (!data) {
-		dev_err(&pdev->dev, "no platform data ?!\n");
-		return -EINVAL;
-	}
+	/* get the DT or static parameters */
+	np = pdev->dev.of_node;
+	if (np) {
+		u32 val;
+
+		if (of_property_read_u32(np, "marvell,burst-size",&val)) {
+			val = 128;		/* default value */
+		} else if (val != 32&&  val != 128) {
+			dev_err(&pdev->dev,
+				"'marvell,burst-size' can be only 32 or 128\n");
+			return -EINVAL;
+		}
+		priv->burst = val;
+		priv->clk = of_clk_get(np, 0);		/* internal clock */
+		priv->extclk = of_clk_get(np, 1); /* optional external clock */
+	} else {
+		if (!data) {
+			dev_err(&pdev->dev, "no platform data ?!\n");
+			return -EINVAL;
+		}
+		priv->burst = data->burst;
 
-	priv->burst = data->burst;
+		priv->clk = clk_get(&pdev->dev, NULL);
+		priv->extclk = clk_get(&pdev->dev, "extclk");
+	}
 
-	priv->clk = devm_clk_get(&pdev->dev, NULL);
  	if (IS_ERR(priv->clk)) {
  		dev_err(&pdev->dev, "no clock\n");
-		return PTR_ERR(priv->clk);
+		err = PTR_ERR(priv->clk);
+		goto error;
  	}
-
  	err = clk_prepare_enable(priv->clk);
  	if (err<  0)
-		return err;
+		goto error;
 
-	priv->extclk = clk_get(&pdev->dev, "extclk");
  	if (!IS_ERR(priv->extclk)) {
  		if (priv->extclk == priv->clk) {
  			clk_put(priv->extclk);
@@ -516,7 +535,7 @@ static int kirkwood_i2s_dev_probe(struct platform_device *pdev)
  	priv->ctl_rec = KIRKWOOD_RECCTL_SIZE_24;
 
  	/* Select the burst size */
-	if (data->burst == 32) {
+	if (priv->burst == 32) {
  		priv->ctl_play |= KIRKWOOD_PLAYCTL_BURST_32;
  		priv->ctl_rec |= KIRKWOOD_RECCTL_BURST_32;
  	} else {
@@ -528,12 +547,13 @@ static int kirkwood_i2s_dev_probe(struct platform_device *pdev)
  	if (!err)
  		return 0;
  	dev_err(&pdev->dev, "snd_soc_register_dai failed\n");
-
+error:
  	if (!IS_ERR(priv->extclk)) {
  		clk_disable_unprepare(priv->extclk);
  		clk_put(priv->extclk);
  	}
  	clk_disable_unprepare(priv->clk);
+	clk_put(priv->clk);
 
  	return err;
  }
@@ -549,16 +569,26 @@ static int kirkwood_i2s_dev_remove(struct platform_device *pdev)
  		clk_put(priv->extclk);
  	}
  	clk_disable_unprepare(priv->clk);
+	clk_put(priv->clk);
 
  	return 0;

sound/soc/kirkwood/kirkwood-i2s.c static int kirkwood_i2s_dev_remove(struct platform_device *pdev) · line 584

Quoted 10 lines
sound/soc/kirkwood/kirkwood-i2s.c +8 -0
  }
 
+#ifdef CONFIG_OF
+static struct of_device_id kirkwood_i2s_of_match[] = {
+	{ .compatible = "marvell,kirkwood-i2s" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, kirkwood_i2s_of_match);
+#endif
+

What about kirkwood-dma? We don't want to have that as another DT node. IMHO both kirkwood-dma and kirkwood-i2s should be merged into one file, then dma can be initialized by a common probe function.

Sebastian

Quoted 10 lines
sound/soc/kirkwood/kirkwood-i2s.c +1 -0
  static struct platform_driver kirkwood_i2s_driver = {
  	.probe  = kirkwood_i2s_dev_probe,
  	.remove = kirkwood_i2s_dev_remove,
  	.driver = {
  		.name = DRV_NAME,
  		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(kirkwood_i2s_of_match),
  	},
  };