Skip to contentSkip to conversation

pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

PATCH New Marek Vasut 3 participants 7 messages Apr 2, 2013 – Apr 3, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

The IOMUXC_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT must be configured as 1 instead of 0 to have AUD4 muxed on SD2 pins working.

Cc Fabio Estevam <[email protected]>
Cc Linus Walleij <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Shawn Guo <[email protected]>
---
 drivers/pinctrl/pinctrl-imx53.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

NOTE: Shawn, we might want this in -stable too ?

drivers/pinctrl/pinctrl-imx53.c +1 -1
index 2c9c8e2..85f401c 100644
@@ -1287,7 +1287,7 @@ static struct imx_pin_reg imx53_pin_regs[] = {
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 0, 0x000, 0), /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 1, 0x000, 0), /* MX53_PAD_SD2_DATA1__GPIO1_14 */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 2, 0x848, 1), /* MX53_PAD_SD2_DATA1__KPP_COL_7 */
-	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 3, 0x744, 0), /* MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS */
+	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 3, 0x744, 1), /* MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 5, 0x78C, 4), /* MX53_PAD_SD2_DATA1__CSPI_SS0 */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 7, 0x000, 0), /* MX53_PAD_SD2_DATA1__RTIC_SEC_VIO */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA0, 0x69C, 0x310, 0, 0x000, 0), /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

Marek,

Quoted 8 lines · Marek Vasut

The IOMUXC_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT must be configured as 1 instead of 0 to have AUD4 muxed on SD2 pins working.

Cc Fabio Estevam <[email protected]>
Cc Linus Walleij <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Shawn Guo <[email protected]>
Quoted 5 lines
---
 drivers/pinctrl/pinctrl-imx53.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

NOTE: Shawn, we might want this in -stable too ?

I have queued patch b466af3 (pinctrl: imx: move hard-coding data into device tree) on my imx/dt branch to remove these tables from pinctrl drivers.

Since there is no in-tree users for MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS, and we're moving away from it, can we just patch arch/arm/boot/dts/imx53-pinfunc.h instead?

Shawn

Quoted 17 lines
drivers/pinctrl/pinctrl-imx53.c +1 -1
index 2c9c8e2..85f401c 100644
@@ -1287,7 +1287,7 @@ static struct imx_pin_reg imx53_pin_regs[] = {
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 0, 0x000, 0), /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 1, 0x000, 0), /* MX53_PAD_SD2_DATA1__GPIO1_14 */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 2, 0x848, 1), /* MX53_PAD_SD2_DATA1__KPP_COL_7 */
-	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 3, 0x744, 0), /* MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS */
+	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 3, 0x744, 1), /* MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 5, 0x78C, 4), /* MX53_PAD_SD2_DATA1__CSPI_SS0 */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 7, 0x000, 0), /* MX53_PAD_SD2_DATA1__RTIC_SEC_VIO */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA0, 0x69C, 0x310, 0, 0x000, 0), /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

Dear Shawn Guo,

Quoted 22 lines

Marek,

Quoted 8 lines · Marek Vasut

The IOMUXC_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT must be configured as 1 instead of 0 to have AUD4 muxed on SD2 pins working.

Cc Fabio Estevam <[email protected]>
Cc Linus Walleij <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Shawn Guo <[email protected]>
Quoted 6 lines

---

 drivers/pinctrl/pinctrl-imx53.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

NOTE: Shawn, we might want this in -stable too ?

I have queued patch b466af3 (pinctrl: imx: move hard-coding data into device tree) on my imx/dt branch to remove these tables from pinctrl drivers.

Quoted 5 lines

Since there is no in-tree users for MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS, and we're moving away from it, can we just patch arch/arm/boot/dts/imx53-pinfunc.h instead?

Shawn

One serving of such patch, coming right up ;-)

btw. do you want to apply this one for -stable or do we just leave it as is ?

Best regards,
Marek Vasut

#3 lore raw

PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

Quoted 4 lines · Marek Vasut

One serving of such patch, coming right up ;-)

btw. do you want to apply this one for -stable or do we just leave it as is ?

If you do not insist, I would say let's leave it as it is, as we encourage people to upgrade device tree to adopt the new pinctrl binding.

Shawn

#4 lore raw

PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

Dear Shawn Guo,

Quoted 9 lines · Marek Vasut
Quoted 4 lines

One serving of such patch, coming right up ;-)

btw. do you want to apply this one for -stable or do we just leave it as is ?

If you do not insist, I would say let's leave it as it is, as we encourage people to upgrade device tree to adopt the new pinctrl binding.

Actually, I have a bad feeling about having an open bug in stable tree. Someone might use that tree and might try to use AUDMUX4 on his (out-of-tree) device and might run into the same problem. Three times 'might' in one sentence doesn't make it sound too likely, but if you have not much trouble with getting it in - stable, please try to.

Best regards,
Marek Vasut

#5 lore raw

PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

Quoted 12 lines · Marek Vasut

Dear Shawn Guo,

Quoted 9 lines · Marek Vasut
Quoted 4 lines

One serving of such patch, coming right up ;-)

btw. do you want to apply this one for -stable or do we just leave it as is ?

If you do not insist, I would say let's leave it as it is, as we encourage people to upgrade device tree to adopt the new pinctrl binding.

Quoted 5 lines

Actually, I have a bad feeling about having an open bug in stable tree. Someone might use that tree and might try to use AUDMUX4 on his (out-of-tree) device and might run into the same problem. Three times 'might' in one sentence doesn't make it sound too likely, but if you have not much trouble with getting it in - stable, please try to.

Ok, it's Linus' call then, since it's a fix that should go via pinctrl tree. Since I will not be able to rebase my 3.10 stuff on -rc7, if the patch does not catch up with -rc6, we run into a annoying merge conflict during the merge window.

Shawn

#6 lore raw

PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

Quoted 19 lines · Shawn Guo
Quoted 12 lines · Marek Vasut

Dear Shawn Guo,

Quoted 9 lines · Marek Vasut
Quoted 4 lines

One serving of such patch, coming right up ;-)

btw. do you want to apply this one for -stable or do we just leave it as is ?

If you do not insist, I would say let's leave it as it is, as we encourage people to upgrade device tree to adopt the new pinctrl binding.

Quoted 5 lines

Actually, I have a bad feeling about having an open bug in stable tree. Someone might use that tree and might try to use AUDMUX4 on his (out-of-tree) device and might run into the same problem. Three times 'might' in one sentence doesn't make it sound too likely, but if you have not much trouble with getting it in - stable, please try to.

Quoted 4 lines

Ok, it's Linus' call then, since it's a fix that should go via pinctrl tree. Since I will not be able to rebase my 3.10 stuff on -rc7, if the patch does not catch up with -rc6, we run into a annoying merge conflict during the merge window.

Basically I'm not keen on sending any DT patches as fixes, DT is at one time supposed to be moved out of the kernel even. I don't think it qualifies for fixes this late in the merge window.

Besides it's not in a part of the file hierarchy I maintain so I strongly prefer pure DT patches to go in from the platform trees. (Subject should be ARM: imx ...)

Please carry this patch in the Freescale tree.

Yours,
Linus Walleij