pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration
Subsystems (2)
PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration
The IOMUXC_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT must be configured as 1 instead of 0 to have AUD4 muxed on SD2 pins working.
--- arch/arm/boot/dts/imx53-pinfunc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx53-pinfunc.h +1 -1
@@ -1073,7 +1073,7 @@#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x30c 0x698 0x000 0x0 0x0#define MX53_PAD_SD2_DATA1__GPIO1_14 0x30c 0x698 0x000 0x1 0x0#define MX53_PAD_SD2_DATA1__KPP_COL_7 0x30c 0x698 0x848 0x2 0x1 -#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x30c 0x698 0x744 0x3 0x0 +#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x30c 0x698 0x744 0x3 0x1#define MX53_PAD_SD2_DATA1__CSPI_SS0 0x30c 0x698 0x78c 0x5 0x4#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO 0x30c 0x698 0x000 0x7 0x0#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x310 0x69c 0x000 0x0 0x0
Signature · 1 line
1.7.10.4
PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration
Quoted 4 lines · Marek Vasut
The
IOMUXC_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUTmust be configured as 1 instead of 0 to have AUD4 muxed on SD2 pins working.Signed-off-by Marek Vasut <[email protected]>
Changed the prefix to "ARM: dts: imx53: " and applied the patch.
Shawn
PATCH 1/1 pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration
Dear Shawn Guo,
Quoted 7 lines · Marek Vasut
Quoted 4 lines
The
IOMUXC_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUTmust be configured as 1 instead of 0 to have AUD4 muxed on SD2 pins working.Signed-off-by Marek Vasut <[email protected]>Changed the prefix to "ARM: dts: imx53: " and applied the patch.
I followed the pattern this time ... oh well, this again. Sorry.
Best regards,
Marek Vasut