Skip to contentSkip to conversation

For-3.10: CPUFreq: Move drivers to drivers/cpufreq

PATCH In review Viresh Kumar 6 participants 58 messages Apr 4, 2013 – Jun 7, 2013

Subsystems (14)
lore
Share & tools
lore

Viresh Kumar

author maintainer
#0 lore raw

cover For-3.10: CPUFreq: Move drivers to drivers/cpufreq

Hi Rafael,

These are all the remaining patches i have for 3.10. All of them have received Acks from their maintainers leaving powerpc ones. I have got an additional patch for powerpc (18) this time, it was the only driver left out of drivers/cpufreq.

Please consider them for applying to your bleeding-edge or linux-next.

-------------x--------------x-------------

This patchset targets towards moving all platform specific cpufreq drivers to drivers/cpufreq. This will lead to better consolidation code in future too.

All ARM and powerpc patches are compile tested by me.

Changes since earlier version:
- Additional patch 18/18

Viresh Kumar (18):
cpufreq: ARM: Arrange drivers in alphabetical order
cpufreq: tegra: Move driver to drivers/cpufreq
cpufreq: davinci: move cpufreq driver to drivers/cpufreq
cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq
cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreq
cpufreq: integrator: move cpufreq driver to drivers/cpufreq
cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq
cpufreq: AVR32: move cpufreq driver to drivers/cpufreq
cpufreq: blackfin: move cpufreq driver to drivers/cpufreq
cpufreq: cris: move cpufreq driver to drivers/cpufreq
cpufreq: ia64: move cpufreq driver to drivers/cpufreq
cpufreq: mips: move cpufreq driver to drivers/cpufreq
cpufreq: sh: move cpufreq driver to drivers/cpufreq
cpufreq: unicore2: move cpufreq driver to drivers/cpufreq
cpufreq: sparc: move cpufreq driver to drivers/cpufreq
cpufreq: powerpc: move cpufreq driver to drivers/cpufreq
cpufreq: powerpc/platforms/cell: move cpufreq driver to
drivers/cpufreq

 arch/arm/Kconfig                                   |  72 --------
 arch/arm/mach-davinci/Makefile                     |   1 -
 arch/arm/mach-integrator/Makefile                  |   1 -
 arch/arm/mach-pxa/Makefile                         |   6 -
 arch/arm/mach-pxa/include/mach/generic.h           |   1 +
 arch/arm/mach-s3c24xx/Kconfig                      |  66 +++-----
 arch/arm/mach-s3c24xx/Makefile                     |   6 -
 arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |   0
 arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |   2 +-
 arch/arm/mach-sa1100/Kconfig                       |  26 +--
 arch/arm/mach-sa1100/Makefile                      |   3 -
 arch/arm/mach-sa1100/include/mach/generic.h        |   1 +
 arch/arm/mach-tegra/Makefile                       |   1 -
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h |  10 +-
 arch/arm/plat-samsung/include/plat/cpu-freq.h      |   6 +-
 arch/avr32/Kconfig                                 |  13 --
 arch/avr32/configs/atngw100_defconfig              |   2 +-
 arch/avr32/configs/atngw100_evklcd100_defconfig    |   2 +-
 arch/avr32/configs/atngw100_evklcd101_defconfig    |   2 +-
 arch/avr32/configs/atngw100_mrmt_defconfig         |   2 +-
 arch/avr32/configs/atngw100mkii_defconfig          |   2 +-
 .../avr32/configs/atngw100mkii_evklcd100_defconfig |   2 +-
 .../avr32/configs/atngw100mkii_evklcd101_defconfig |   2 +-
 arch/avr32/configs/atstk1002_defconfig             |   2 +-
 arch/avr32/configs/atstk1003_defconfig             |   2 +-
 arch/avr32/configs/atstk1004_defconfig             |   2 +-
 arch/avr32/configs/atstk1006_defconfig             |   2 +-
 arch/avr32/configs/favr-32_defconfig               |   2 +-
 arch/avr32/configs/hammerhead_defconfig            |   2 +-
 arch/avr32/configs/mimc200_defconfig               |   2 +-
 arch/avr32/mach-at32ap/Makefile                    |   1 -
 arch/blackfin/mach-common/Makefile                 |   1 -
 arch/cris/arch-v32/mach-a3/Makefile                |   1 -
 arch/cris/arch-v32/mach-fs/Makefile                |   1 -
 arch/ia64/Kconfig                                  |   6 +-
 arch/ia64/kernel/Makefile                          |   1 -
 arch/ia64/kernel/cpufreq/Kconfig                   |  29 ----
 arch/ia64/kernel/cpufreq/Makefile                  |   2 -
 arch/mips/Kconfig                                  |   9 +-
 arch/mips/kernel/Makefile                          |   2 -
 arch/mips/kernel/cpufreq/Kconfig                   |  41 -----
 arch/mips/kernel/cpufreq/Makefile                  |   5 -
 arch/powerpc/platforms/Kconfig                     |  31 ----
 arch/powerpc/platforms/cell/Kconfig                |  26 +--
 arch/powerpc/platforms/cell/Makefile               |   3 -
 arch/powerpc/platforms/pasemi/Makefile             |   1 -
 arch/powerpc/platforms/powermac/Makefile           |   2 -
 arch/sh/Kconfig                                    |  18 --
 arch/sh/kernel/Makefile                            |   1 -
 arch/sparc/Kconfig                                 |  23 ---
 arch/sparc/kernel/Makefile                         |   3 -
 arch/unicore32/kernel/Makefile                     |   1 -
 drivers/cpufreq/Kconfig                            |  89 ++++++++++
 drivers/cpufreq/Kconfig.arm                        | 184 ++++++++++++++-------
 drivers/cpufreq/Kconfig.powerpc                    |  44 +++++
 drivers/cpufreq/Makefile                           |  42 ++++-
 .../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c  |   0
 .../cpufreq/blackfin-cpufreq.c                     |   0
 .../cpufreq/cris-artpec3-cpufreq.c                 |   0
 .../cpufreq/cris-etraxfs-cpufreq.c                 |   0
 .../cpufreq.c => drivers/cpufreq/davinci-cpufreq.c |   2 -
 .../cpufreq/ia64-acpi-cpufreq.c                    |   1 -
 .../cpu.c => drivers/cpufreq/integrator-cpufreq.c  |   2 -
 .../kernel => drivers}/cpufreq/loongson2_cpufreq.c |   0
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |   0
 .../cpufreq/pmac32-cpufreq.c                       |   0
 .../cpufreq/pmac64-cpufreq.c                       |   0
 .../cpufreq/ppc_cbe_cpufreq.c                      |   2 +-
 .../cpufreq/ppc_cbe_cpufreq_pervasive.c            |   3 +-
 .../cpufreq/ppc_cbe_cpufreq_pmi.c                  |   3 +-
 .../cpufreq/pxa2xx-cpufreq.c                       |   2 -
 .../cpufreq/pxa3xx-cpufreq.c                       |   5 +-
 .../cpufreq/s3c2410-cpufreq.c                      |   0
 .../cpufreq/s3c2412-cpufreq.c                      |   3 +-
 .../cpufreq/s3c2440-cpufreq.c                      |   0
 .../cpufreq/s3c24xx-cpufreq-debugfs.c              |   0
 .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |   0
 .../cpufreq/sa1100-cpufreq.c                       |   3 +-
 .../cpufreq/sa1110-cpufreq.c                       |   3 +-
 .../cpufreq.c => drivers/cpufreq/sh-cpufreq.c      |   2 -
 .../cpufreq/sparc-us2e-cpufreq.c                   |   0
 .../cpufreq/sparc-us3-cpufreq.c                    |   0
 .../cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c |   2 -
 .../cpufreq/unicore2-cpufreq.c                     |   2 +-
 .../linux/ppc_cbe_cpufreq.h                        |   4 +-
 85 files changed, 385 insertions(+), 464 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
 rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
 create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h
 delete mode 100644 arch/ia64/kernel/cpufreq/Kconfig
 delete mode 100644 arch/ia64/kernel/cpufreq/Makefile
 delete mode 100644 arch/mips/kernel/cpufreq/Kconfig
 delete mode 100644 arch/mips/kernel/cpufreq/Makefile
 rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)
 rename arch/blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c (100%)
 rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%)
 rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%)
 rename arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c (99%)
 rename arch/ia64/kernel/cpufreq/acpi-cpufreq.c => drivers/cpufreq/ia64-acpi-cpufreq.c (99%)
 rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)
 rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq.c => drivers/cpufreq/ppc_cbe_cpufreq.c (99%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c => drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c (98%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c => drivers/cpufreq/ppc_cbe_cpufreq_pmi.c (99%)
 rename arch/arm/mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c (99%)
 rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
 rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%)
 rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%)
 rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
 rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%)
 rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/sparc-us3-cpufreq.c (100%)
 rename arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c (99%)
 rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq.h => include/linux/ppc_cbe_cpufreq.h (82%)
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#1 lore raw

PATCH 1/18 cpufreq: ARM: Arrange drivers in alphabetical order

Normally we keep drivers in alphabetical inside Kconfig and Makefile and over time this was broken for ARM cpufreq drivers. Fix it.

---
 drivers/cpufreq/Kconfig.arm | 116 ++++++++++++++++++++++----------------------
 drivers/cpufreq/Makefile    |  10 ++--
 2 files changed, 63 insertions(+), 63 deletions(-)
drivers/cpufreq/Kconfig.arm +58 -58
index 87b7e48..25d866a 100644
@@ -14,6 +14,64 @@ config ARM_DT_BL_CPUFREQ
 	  This enables the Generic CPUfreq driver for ARM big.LITTLE platform.
 	  This gets frequency tables from DT.
 
+config ARM_EXYNOS_CPUFREQ
+	bool "SAMSUNG EXYNOS SoCs"
+	depends on ARCH_EXYNOS
+	default y
+	help
+	  This adds the CPUFreq driver common part for Samsung
+	  EXYNOS SoCs.
+
+	  If in doubt, say N.
+
+config ARM_EXYNOS4210_CPUFREQ
+	def_bool CPU_EXYNOS4210
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4210
+	  SoC (S5PV310 or S5PC210).
+
+config ARM_EXYNOS4X12_CPUFREQ
+	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4X12
+	  SoC (EXYNOS4212 or EXYNOS4412).
+
+config ARM_EXYNOS5250_CPUFREQ
+	def_bool SOC_EXYNOS5250
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS5250
+	  SoC.
+
+config ARM_HIGHBANK_CPUFREQ
+	tristate "Calxeda Highbank-based"
+	depends on ARCH_HIGHBANK
+	select CPU_FREQ_TABLE
+	select GENERIC_CPUFREQ_CPU0
+	select PM_OPP
+	select REGULATOR
+
+	default m
+	help
+	  This adds the CPUFreq driver for Calxeda Highbank SoC
+	  based boards.
+
+	  If in doubt, say N.
+
+config ARM_IMX6Q_CPUFREQ
+	tristate "Freescale i.MX6Q cpufreq support"
+	depends on SOC_IMX6Q
+	depends on REGULATOR_ANATOP
+	help
+	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
+
+	  If in doubt, say N.
+
+config ARM_KIRKWOOD_CPUFREQ
+	def_bool ARCH_KIRKWOOD && OF
+	help
+	  This adds the CPUFreq driver for Marvell Kirkwood
+	  SoCs.
+
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
 	depends on ARCH_OMAP2PLUS
@@ -61,67 +119,9 @@ config ARM_S5PV210_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_EXYNOS_CPUFREQ
-	bool "SAMSUNG EXYNOS SoCs"
-	depends on ARCH_EXYNOS
-	default y
-	help
-	  This adds the CPUFreq driver common part for Samsung
-	  EXYNOS SoCs.
-
-	  If in doubt, say N.
-
-config ARM_EXYNOS4210_CPUFREQ
-	def_bool CPU_EXYNOS4210
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS4210
-	  SoC (S5PV310 or S5PC210).
-
-config ARM_EXYNOS4X12_CPUFREQ
-	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS4X12
-	  SoC (EXYNOS4212 or EXYNOS4412).
-
-config ARM_EXYNOS5250_CPUFREQ
-	def_bool SOC_EXYNOS5250
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS5250
-	  SoC.
-
-config ARM_KIRKWOOD_CPUFREQ
-	def_bool ARCH_KIRKWOOD && OF
-	help
-	  This adds the CPUFreq driver for Marvell Kirkwood
-	  SoCs.
-
-config ARM_IMX6Q_CPUFREQ
-	tristate "Freescale i.MX6Q cpufreq support"
-	depends on SOC_IMX6Q
-	depends on REGULATOR_ANATOP
-	help
-	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
-
-	  If in doubt, say N.
-
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR
 	default y
 	help
 	  This adds the CPUFreq driver support for SPEAr SOCs.
-
-config ARM_HIGHBANK_CPUFREQ
-	tristate "Calxeda Highbank-based"
-	depends on ARCH_HIGHBANK
-	select CPU_FREQ_TABLE
-	select GENERIC_CPUFREQ_CPU0
-	select PM_OPP
-	select REGULATOR
-
-	default m
-	help
-	  This adds the CPUFreq driver for Calxeda Highbank SoC
-	  based boards.
-
-	  If in doubt, say N.
drivers/cpufreq/Makefile +5 -5
index ba9a3e1..2c25504 100644
@@ -50,18 +50,18 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+= arm_big_little.o
 obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
 
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
-obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
-obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
-obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
+obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
-obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
-obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#2 lore raw

PATCH 2/18 cpufreq: tegra: Move driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of ARM based tegra platform to drivers/cpufreq.

---
 arch/arm/mach-tegra/Makefile                                       | 1 -
 drivers/cpufreq/Makefile                                           | 1 +
 arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c | 2 --
 3 files changed, 1 insertion(+), 3 deletions(-)
 rename arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c (99%)
arch/arm/mach-tegra/Makefile +0 -1
index f6b46ae..09b578f 100644
@@ -24,7 +24,6 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= cpuidle-tegra30.o
 endif
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
-obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-dt-tegra20.o
drivers/cpufreq/Makefile +1 -0
index 2c25504..c34094b 100644
@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
+obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
drivers/cpufreq/tegra-cpufreq.c renamed from arch/arm/mach-tegra/cpu-tegra.c +0 -2
similarity index 99%
rename from arch/arm/mach-tegra/cpu-tegra.c
rename to drivers/cpufreq/tegra-cpufreq.c
index 11ca730..c74c0e1 100644
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-tegra/cpu-tegra.c
- *
  * Copyright (C) 2010 Google, Inc.
  *
  * Author:
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#3 lore raw

PATCH 3/18 cpufreq: davinci: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of ARM based davinci platform to drivers/cpufreq.

---
 arch/arm/mach-davinci/Makefile                                       | 1 -
 drivers/cpufreq/Makefile                                             | 1 +
 arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c | 2 --
 3 files changed, 1 insertion(+), 3 deletions(-)
 rename arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c (99%)
arch/arm/mach-davinci/Makefile +0 -1
index fb5c1aa..dd1ffcc 100644
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o
drivers/cpufreq/Makefile +1 -0
index c34094b..c0e8921 100644
@@ -49,6 +49,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+= arm_big_little.o
 # LITTLE drivers, so that it is probed last.
 obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
 
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= davinci-cpufreq.o
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
drivers/cpufreq/davinci-cpufreq.c renamed from arch/arm/mach-davinci/cpufreq.c +0 -2
similarity index 99%
rename from arch/arm/mach-davinci/cpufreq.c
rename to drivers/cpufreq/davinci-cpufreq.c
index 7c2e943..c33c76c 100644
@@ -30,8 +30,6 @@
 #include <mach/cpufreq.h>
 #include <mach/common.h>
 
-#include "clock.h"
-
 struct davinci_cpufreq {
 	struct device *dev;
 	struct clk *armclk;
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#4 lore raw

PATCH 4/18 cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of ARM based pxa3xx platform to drivers/cpufreq.

---
 arch/arm/mach-pxa/Makefile                                           | 1 -
 arch/arm/mach-pxa/include/mach/generic.h                             | 1 +
 drivers/cpufreq/Makefile                                             | 1 +
 .../mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c    | 5 +----
 4 files changed, 3 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
 rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
arch/arm/mach-pxa/Makefile +0 -1
index 12c5005..929e700 100644
@@ -10,7 +10,6 @@ obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 ifeq ($(CONFIG_CPU_FREQ),y)
 obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
 obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
 endif
 
 # Generic drivers that other drivers may depend upon
arch/arm/mach-pxa/include/mach/generic.h new file +1 -0
new file mode 100644
index 0000000..665542e
@@ -0,0 +1 @@
+#include "../../generic.h"
drivers/cpufreq/Makefile +1 -0
index c0e8921..3458bf2 100644
@@ -59,6 +59,7 @@ obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
drivers/cpufreq/pxa3xx-cpufreq.c renamed from arch/arm/mach-pxa/cpufreq-pxa3xx.c +1 -4
similarity index 98%
rename from arch/arm/mach-pxa/cpufreq-pxa3xx.c
rename to drivers/cpufreq/pxa3xx-cpufreq.c
index 8c45b2b..15d60f8 100644
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
- *
  * Copyright (C) 2008 Marvell International Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -17,10 +15,9 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 
+#include <mach/generic.h>
 #include <mach/pxa3xx-regs.h>
 
-#include "generic.h"
-
 #define HSS_104M	(0)
 #define HSS_156M	(1)
 #define HSS_208M	(2)
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#5 lore raw

PATCH 5/18 cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of ARM based pxa2xx platform to drivers/cpufreq.

---
 arch/arm/Kconfig                                                   | 7 -------
 arch/arm/mach-pxa/Makefile                                         | 5 -----
 drivers/cpufreq/Makefile                                           | 2 ++
 .../mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c  | 2 --
 4 files changed, 2 insertions(+), 14 deletions(-)
 rename arch/arm/mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c (99%)
arch/arm/Kconfig +0 -7
index 13b7394..76eb836 100644
@@ -2177,13 +2177,6 @@ config CPU_FREQ_INTEGRATOR
 
 	  If in doubt, say Y.
 
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-	select CPU_FREQ_TABLE
-
 config CPU_FREQ_S3C
 	bool
 	help
arch/arm/mach-pxa/Makefile +0 -5
index 929e700..648867a 100644
@@ -7,11 +7,6 @@ obj-y				+= clock.o devices.o generic.o irq.o \
 				   time.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
-ifeq ($(CONFIG_CPU_FREQ),y)
-obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
-endif
-
 # Generic drivers that other drivers may depend upon
 
 # SoC-specific code
drivers/cpufreq/Makefile +2 -0
index 3458bf2..aa766fb 100644
@@ -59,6 +59,8 @@ obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
+obj-$(CONFIG_PXA27x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
drivers/cpufreq/pxa2xx-cpufreq.c renamed from arch/arm/mach-pxa/cpufreq-pxa2xx.c +0 -2
similarity index 99%
rename from arch/arm/mach-pxa/cpufreq-pxa2xx.c
rename to drivers/cpufreq/pxa2xx-cpufreq.c
index f1ca4da..fe4c55b 100644
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
- *
  *  Copyright (C) 2002,2003 Intrinsyc Software
  *
  * This program is free software; you can redistribute it and/or modify
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#6 lore raw

PATCH 6/18 cpufreq: integrator: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of ARM based integrator platform to drivers/cpufreq.

---
 arch/arm/Kconfig                                              | 11 -----------
 arch/arm/mach-integrator/Makefile                             |  1 -
 drivers/cpufreq/Kconfig.arm                                   |  8 ++++++++
 drivers/cpufreq/Makefile                                      |  1 +
 .../cpu.c => drivers/cpufreq/integrator-cpufreq.c             |  2 --
 5 files changed, 9 insertions(+), 14 deletions(-)
 rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)
arch/arm/Kconfig +0 -11
index 76eb836..c3563f6 100644
@@ -2166,17 +2166,6 @@ config CPU_FREQ_SA1100
 config CPU_FREQ_SA1110
 	bool
 
-config CPU_FREQ_INTEGRATOR
-	tristate "CPUfreq driver for ARM Integrator CPUs"
-	depends on ARCH_INTEGRATOR && CPU_FREQ
-	default y
-	help
-	  This enables the CPUfreq driver for ARM Integrator CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say Y.
-
 config CPU_FREQ_S3C
 	bool
 	help
arch/arm/mach-integrator/Makefile +0 -1
index 5521d18..d14d6b7 100644
@@ -9,5 +9,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
-obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
drivers/cpufreq/Kconfig.arm +8 -0
index 25d866a..97f208d 100644
@@ -66,6 +66,14 @@ config ARM_IMX6Q_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_INTEGRATOR
+	tristate "CPUfreq driver for ARM Integrator CPUs"
+	depends on ARCH_INTEGRATOR
+	default y
+	help
+	  This enables the CPUfreq driver for ARM Integrator CPUs.
+	  If in doubt, say Y.
+
 config ARM_KIRKWOOD_CPUFREQ
 	def_bool ARCH_KIRKWOOD && OF
 	help
drivers/cpufreq/Makefile +1 -0
index aa766fb..8d58016 100644
@@ -57,6 +57,7 @@ obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
+obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
drivers/cpufreq/integrator-cpufreq.c renamed from arch/arm/mach-integrator/cpu.c +0 -2
similarity index 99%
rename from arch/arm/mach-integrator/cpu.c
rename to drivers/cpufreq/integrator-cpufreq.c
index df863c3..f7c99df 100644
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-integrator/cpu.c
- *
  *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#7 lore raw

PATCH 7/18 cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to drivers/cpufreq.

---
 arch/arm/Kconfig                                   | 46 ---------------
 arch/arm/mach-s3c24xx/Kconfig                      | 66 +++++++++-------------
 arch/arm/mach-s3c24xx/Makefile                     |  6 --
 arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |  0
 arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |  2 +-
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 ++--
 arch/arm/plat-samsung/include/plat/cpu-freq.h      |  6 +-
 drivers/cpufreq/Kconfig.arm                        | 58 +++++++++++++++++++
 drivers/cpufreq/Makefile                           |  5 ++
 .../cpufreq/s3c2410-cpufreq.c                      |  0
 .../cpufreq/s3c2412-cpufreq.c                      |  3 +-
 .../cpufreq/s3c2440-cpufreq.c                      |  0
 .../cpufreq/s3c24xx-cpufreq-debugfs.c              |  0
 .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |  0
 14 files changed, 100 insertions(+), 102 deletions(-)
 rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
arch/arm/Kconfig +0 -46
index c3563f6..70366b7 100644
@@ -2166,52 +2166,6 @@ config CPU_FREQ_SA1100
 config CPU_FREQ_SA1110
 	bool
 
-config CPU_FREQ_S3C
-	bool
-	help
-	  Internal configuration node for common cpufreq on Samsung SoC
-
-config CPU_FREQ_S3C24XX
-	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C24XX && CPU_FREQ
-	select CPU_FREQ_S3C
-	help
-	  This enables the CPUfreq driver for the Samsung S3C24XX family
-	  of CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
-config CPU_FREQ_S3C24XX_PLL
-	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Compile in support for changing the PLL frequency from the
-	  S3C24XX series CPUfreq driver. The PLL takes time to settle
-	  after a frequency change, so by default it is not enabled.
-
-	  This also means that the PLL tables for the selected CPU(s) will
-	  be built which may increase the size of the kernel image.
-
-config CPU_FREQ_S3C24XX_DEBUG
-	bool "Debug CPUfreq Samsung driver core"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_IODEBUG
-	bool "Debug CPUfreq Samsung driver IO timing"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_DEBUGFS
-	bool "Export debugfs for CPUFreq"
-	depends on CPU_FREQ_S3C24XX && DEBUG_FS
-	help
-	  Export status information via debugfs.
-
 endif
 
 source "drivers/cpuidle/Kconfig"
arch/arm/mach-s3c24xx/Kconfig +27 -39

141 lines not on this page · raw message

arch/arm/mach-s3c24xx/Makefile +0 -6
index af53d27..15ce13c 100644
@@ -17,13 +17,11 @@ obj-				:=
 obj-y				+= common.o irq.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o irq-s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpufreq-s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
@@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o irq-s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
@@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
-obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpufreq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
-
 #
 # machine support
 # following is ordered alphabetically by option text.
arch/arm/mach-s3c24xx/include/mach/s3c2412.h renamed from arch/arm/mach-s3c24xx/s3c2412.h +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/s3c2412.h
rename to arch/arm/mach-s3c24xx/include/mach/s3c2412.h
arch/arm/mach-s3c24xx/iotiming-s3c2412.c +1 -1
index 663436d..bd064c0 100644
@@ -31,7 +31,7 @@
 #include <plat/cpu-freq-core.h>
 #include <plat/clock.h>
 
-#include "s3c2412.h"
+#include <mach/s3c2412.h>
 
 #define print_ns(x) ((x) / 10), ((x) % 10)
 
arch/arm/plat-samsung/include/plat/cpu-freq-core.h +5 -5
index 95509d8..d7e1715 100644
@@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
 extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
 extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
 #define s3c_cpufreq_debugfs_call(x) x
 #else
 #define s3c_cpufreq_debugfs_call(x) NULL
@@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
 #define s3c2412_iotiming_set NULL
 #endif /* CONFIG_S3C2412_IOTIMING */
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
 #else
 #define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG
 #define s3c_freq_iodbg(x...) printk(KERN_INFO x)
 #else
 #define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */
 
 static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
 				      int index, size_t table_size,
arch/arm/plat-samsung/include/plat/cpu-freq.h +3 -3
index 80c4a80..85517ab 100644
@@ -126,7 +126,7 @@ struct s3c_cpufreq_board {
 };
 
 /* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
 #define __init_or_cpufreq
 #else
 #define __init_or_cpufreq __init
@@ -134,7 +134,7 @@ struct s3c_cpufreq_board {
 
 /* Board functions */
 
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
 extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
 #else
 
@@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
 {
 	return 0;
 }
-#endif  /* CONFIG_CPU_FREQ_S3C */
+#endif  /* CONFIG_ARM_S3C_CPUFREQ */
drivers/cpufreq/Kconfig.arm +58 -0

70 lines not on this page · raw message

drivers/cpufreq/Makefile +5 -0
index 8d58016..a55e3e8 100644
@@ -63,7 +63,12 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA27x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
+obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
+obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
drivers/cpufreq/s3c2410-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2410.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
rename to drivers/cpufreq/s3c2410-cpufreq.c
drivers/cpufreq/s3c2412-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2412.c +1 -2
similarity index 99%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
rename to drivers/cpufreq/s3c2412-cpufreq.c
index 8bf0f3a..4645b48 100644
@@ -25,13 +25,12 @@
 #include <asm/mach/map.h>
 
 #include <mach/regs-clock.h>
+#include <mach/s3c2412.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/cpu-freq-core.h>
 
-#include "s3c2412.h"
-
 /* our clock resources. */
 static struct clk *xtal;
 static struct clk *fclk;
drivers/cpufreq/s3c2440-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2440.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
rename to drivers/cpufreq/s3c2440-cpufreq.c
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c renamed from arch/arm/mach-s3c24xx/cpufreq-debugfs.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-debugfs.c
rename to drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
drivers/cpufreq/s3c24xx-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq.c
rename to drivers/cpufreq/s3c24xx-cpufreq.c
Signature · 1 line
1.7.12.rc2.18.g61b472e
#8 lore raw

RE: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 10 lines · Viresh Kumar

This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to drivers/cpufreq.

Quoted 3 lines
---
 arch/arm/Kconfig                                   | 46 ---------------
 arch/arm/mach-s3c24xx/Kconfig                      | 66

+++++++++-------------

Quoted 6 lines
 arch/arm/mach-s3c24xx/Makefile                     |  6 --
 arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |  0
 arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |  2 +-
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 ++--
 arch/arm/plat-samsung/include/plat/cpu-freq.h      |  6 +-
 drivers/cpufreq/Kconfig.arm                        | 58

+++++++++++++++++++

Quoted 17 lines
 drivers/cpufreq/Makefile                           |  5 ++
 .../cpufreq/s3c2410-cpufreq.c                      |  0
 .../cpufreq/s3c2412-cpufreq.c                      |  3 +-
 .../cpufreq/s3c2440-cpufreq.c                      |  0
 .../cpufreq/s3c24xx-cpufreq-debugfs.c              |  0
 .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |  0
 14 files changed, 100 insertions(+), 102 deletions(-)
 rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c =>
drivers/cpufreq/s3c2410-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c =>
drivers/cpufreq/s3c2412-cpufreq.c (99%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c =>
drivers/cpufreq/s3c2440-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c =>
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-
Quoted 2 lines

cpufreq.c (100%)

Basically, this moving looks good to me, but should be re-worked based on for-next of samsung tree because this touches too many samsung stuff so this should be sent to upstream via samsung tree.

See below,

Applying: cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
error: patch failed: arch/arm/Kconfig:2166
error: arch/arm/Kconfig: patch does not apply
error: patch failed: arch/arm/mach-s3c24xx/Kconfig:28
error: arch/arm/mach-s3c24xx/Kconfig: patch does not apply
error: patch failed: arch/arm/mach-s3c24xx/Makefile:17
error: arch/arm/mach-s3c24xx/Makefile: patch does not apply
error: patch failed: drivers/cpufreq/Makefile:63
error: drivers/cpufreq/Makefile: patch does not apply
error: drivers/cpufreq/s3c2412-cpufreq.c: does not exist in index Patch failed at 0001 cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Thanks.

- Kukjin

author maintainer Acked-by Arnd Bergmann
#9 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 3 lines · Kukjin Kim

Basically, this moving looks good to me, but should be re-worked based on for-next of samsung tree because this touches too many samsung stuff so this should be sent to upstream via samsung tree.

Hmm... Its already applied in Rafael's tree. But it doesn't mean that it can't be
moved to your tree if there is a issue.

What tree/branch? I used:

git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git for-next

Quoted 3 lines

Applying: cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
error: patch failed: arch/arm/Kconfig:2166
error: arch/arm/Kconfig: patch does not apply

above two are obvious as you haven't applied other patches in this series.

Quoted 6 lines

error: patch failed: arch/arm/mach-s3c24xx/Kconfig:28
error: arch/arm/mach-s3c24xx/Kconfig: patch does not apply
error: patch failed: arch/arm/mach-s3c24xx/Makefile:17
error: arch/arm/mach-s3c24xx/Makefile: patch does not apply
error: patch failed: drivers/cpufreq/Makefile:63
error: drivers/cpufreq/Makefile: patch does not apply

Same here.

Quoted 1 line

error: drivers/cpufreq/s3c2412-cpufreq.c: does not exist in index

I can still see it in for-next.

Attached is my patch based of your for-next

From 82f51a4ba40eb7d0af8dd49abcbece5d49467408 Mon Sep 17 00:00:00 2001
Message-Id: <82f51a4ba40eb7d0af8dd49abcbece5d49467408.1365145398.git.viresh.kumar@linaro.org>
From: Viresh Kumar <[email protected]>
Date: Thu, 4 Apr 2013 12:54:15 +0000
Subject: [PATCH] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to drivers/cpufreq.

Conflicts:
arch/arm/Kconfig
arch/arm/mach-s3c24xx/Kconfig
arch/arm/mach-s3c24xx/Makefile
drivers/cpufreq/Makefile

---
 arch/arm/Kconfig                                   | 47 ---------------
 arch/arm/mach-s3c24xx/Kconfig                      | 66 +++++++++-------------
 arch/arm/mach-s3c24xx/Makefile                     |  6 --
 arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |  0
 arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |  2 +-
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 ++--
 arch/arm/plat-samsung/include/plat/cpu-freq.h      |  6 +-
 drivers/cpufreq/Kconfig.arm                        | 58 +++++++++++++++++++
 drivers/cpufreq/Makefile                           |  9 ++-
 .../cpufreq/s3c2410-cpufreq.c                      |  0
 .../cpufreq/s3c2412-cpufreq.c                      |  3 +-
 .../cpufreq/s3c2440-cpufreq.c                      |  0
 .../cpufreq/s3c24xx-cpufreq-debugfs.c              |  0
 .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |  0
 14 files changed, 102 insertions(+), 105 deletions(-)
 rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
arch/arm/Kconfig +0 -47
index dd68dec..d2946131 100644
@@ -2189,53 +2189,6 @@ config CPU_FREQ_PXA
 	default y
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 	select CPU_FREQ_TABLE
-
-config CPU_FREQ_S3C
-	bool
-	help
-	  Internal configuration node for common cpufreq on Samsung SoC
-
-config CPU_FREQ_S3C24XX
-	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C24XX && CPU_FREQ
-	select CPU_FREQ_S3C
-	help
-	  This enables the CPUfreq driver for the Samsung S3C24XX family
-	  of CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
-config CPU_FREQ_S3C24XX_PLL
-	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Compile in support for changing the PLL frequency from the
-	  S3C24XX series CPUfreq driver. The PLL takes time to settle
-	  after a frequency change, so by default it is not enabled.
-
-	  This also means that the PLL tables for the selected CPU(s) will
-	  be built which may increase the size of the kernel image.
-
-config CPU_FREQ_S3C24XX_DEBUG
-	bool "Debug CPUfreq Samsung driver core"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_IODEBUG
-	bool "Debug CPUfreq Samsung driver IO timing"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_DEBUGFS
-	bool "Export debugfs for CPUFreq"
-	depends on CPU_FREQ_S3C24XX && DEBUG_FS
-	help
-	  Export status information via debugfs.
-
 endif
 
 source "drivers/cpuidle/Kconfig"
arch/arm/mach-s3c24xx/Kconfig +27 -39

141 lines not on this page · raw message

arch/arm/mach-s3c24xx/Makefile +0 -6
index 6f46ecf..a3b495a 100644
@@ -17,13 +17,11 @@ obj-				:=
 obj-y				+= common.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpufreq-s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
@@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
@@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
-obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpufreq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
-
 #
 # machine support
 # following is ordered alphabetically by option text.
arch/arm/mach-s3c24xx/include/mach/s3c2412.h renamed from arch/arm/mach-s3c24xx/s3c2412.h +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/s3c2412.h
rename to arch/arm/mach-s3c24xx/include/mach/s3c2412.h
arch/arm/mach-s3c24xx/iotiming-s3c2412.c +1 -1
index 663436d..bd064c0 100644
@@ -31,7 +31,7 @@
 #include <plat/cpu-freq-core.h>
 #include <plat/clock.h>
 
-#include "s3c2412.h"
+#include <mach/s3c2412.h>
 
 #define print_ns(x) ((x) / 10), ((x) % 10)
 
arch/arm/plat-samsung/include/plat/cpu-freq-core.h +5 -5
index 95509d8..d7e1715 100644
@@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
 extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
 extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
 #define s3c_cpufreq_debugfs_call(x) x
 #else
 #define s3c_cpufreq_debugfs_call(x) NULL
@@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
 #define s3c2412_iotiming_set NULL
 #endif /* CONFIG_S3C2412_IOTIMING */
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
 #else
 #define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG
 #define s3c_freq_iodbg(x...) printk(KERN_INFO x)
 #else
 #define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */
 
 static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
 				      int index, size_t table_size,
arch/arm/plat-samsung/include/plat/cpu-freq.h +3 -3
index 80c4a80..85517ab 100644
@@ -126,7 +126,7 @@ struct s3c_cpufreq_board {
 };
 
 /* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
 #define __init_or_cpufreq
 #else
 #define __init_or_cpufreq __init
@@ -134,7 +134,7 @@ struct s3c_cpufreq_board {
 
 /* Board functions */
 
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
 extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
 #else
 
@@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
 {
 	return 0;
 }
-#endif  /* CONFIG_CPU_FREQ_S3C */
+#endif  /* CONFIG_ARM_S3C_CPUFREQ */
drivers/cpufreq/Kconfig.arm +58 -0

70 lines not on this page · raw message

drivers/cpufreq/Makefile +7 -2
index 863fd18..40280db 100644
@@ -45,8 +45,6 @@ obj-$(CONFIG_X86_INTEL_PSTATE)		+= intel_pstate.o
 ##################################################################################
 # ARM SoC drivers
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
-obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
-obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
@@ -54,6 +52,13 @@ obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
+obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
+obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
drivers/cpufreq/s3c2410-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2410.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
rename to drivers/cpufreq/s3c2410-cpufreq.c
drivers/cpufreq/s3c2412-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2412.c +1 -2
similarity index 99%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
rename to drivers/cpufreq/s3c2412-cpufreq.c
index 8bf0f3a..4645b48 100644
@@ -25,13 +25,12 @@
 #include <asm/mach/map.h>
 
 #include <mach/regs-clock.h>
+#include <mach/s3c2412.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/cpu-freq-core.h>
 
-#include "s3c2412.h"
-
 /* our clock resources. */
 static struct clk *xtal;
 static struct clk *fclk;
drivers/cpufreq/s3c2440-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2440.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
rename to drivers/cpufreq/s3c2440-cpufreq.c
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c renamed from arch/arm/mach-s3c24xx/cpufreq-debugfs.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-debugfs.c
rename to drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
drivers/cpufreq/s3c24xx-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq.c
rename to drivers/cpufreq/s3c24xx-cpufreq.c
Signature · 1 line
1.7.12.rc2.18.g61b472e
#10 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 8 lines · Viresh Kumar
Quoted 3 lines · Kukjin Kim

Basically, this moving looks good to me, but should be re-worked based on for-next of samsung tree because this touches too many samsung stuff so this should be sent to upstream via samsung tree.

Hmm... Its already applied in Rafael's tree. But it doesn't mean that it can't be
moved to your tree if there is a issue.

Well, I'm dropping it. Please merge via the Samsung tree.

Thanks,
Rafael

Signature · 2 lines
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
#11 lore raw

RE: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 6 lines · Rafael J. Wysocki
Quoted 2 lines · Viresh Kumar
Quoted 1 line · Kukjin Kim

Basically, this moving looks good to me, but should be re-worked based

on

Quoted 1 line
Quoted 1 line

for-next of samsung tree because this touches too many samsung stuff

Quoted 9 lines

so this

Quoted 5 lines
Quoted 1 line

should be sent to upstream via samsung tree.

Hmm... Its already applied in Rafael's tree. But it doesn't mean that it can't be
moved to your tree if there is a issue.

Well, I'm dropping it. Please merge via the Samsung tree.

OK, I will.

I got patch file from Viresh, and there is a sign from Rafael, but it should be ack. So Rafael, let me use your ack on this patch when I apply. If any problems, please let me know.

Thanks.

- Kukjin

author maintainer
#12 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 6 lines · Kukjin Kim
Quoted 2 lines · Rafael J. Wysocki

Well, I'm dropping it. Please merge via the Samsung tree.

OK, I will.

I got patch file from Viresh, and there is a sign from Rafael, but it should be ack. So Rafael, let me use your ack on this patch when I apply. If any problems, please let me know.

Ahh.. I forgot to remove it. I picked the initial patch from Rafael's tree. But yes, you need it anyway :)

#13 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

In reply to Kukjin Kim
Quoted 14 lines · Kukjin Kim
Quoted 13 lines · Rafael J. Wysocki
Quoted 2 lines · Viresh Kumar
Quoted 1 line · Kukjin Kim

Basically, this moving looks good to me, but should be re-worked based

on

Quoted 1 line
Quoted 1 line

for-next of samsung tree because this touches too many samsung stuff

so this

Quoted 5 lines
Quoted 1 line

should be sent to upstream via samsung tree.

Hmm... Its already applied in Rafael's tree. But it doesn't mean that it can't be
moved to your tree if there is a issue.

Quoted 7 lines
Quoted 2 lines

Well, I'm dropping it. Please merge via the Samsung tree.

OK, I will.

I got patch file from Viresh, and there is a sign from Rafael, but it should be ack. So Rafael, let me use your ack on this patch when I apply. If any problems, please let me know.

Since it was signed-off by me before, you can assume it's been ACKed as well.

Thanks,
Rafael

Signature · 2 lines
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
#14 lore raw

RE: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Rafael J. Wysocki wrote:

[...]

Quoted 12 lines
Quoted 8 lines
Quoted 3 lines

Well, I'm dropping it. Please merge via the Samsung tree.

OK, I will.

I got patch file from Viresh, and there is a sign from Rafael, but it should be ack. So Rafael, let me use your ack on this patch when I apply. If any problems, please let me know.

Since it was signed-off by me before, you can assume it's been ACKed as well.

Thanks.

- Kukjin

Acked-by
#15 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

In reply to Rafael J. Wysocki
Quoted 6 lines · Rafael J. Wysocki
Quoted 5 lines · Viresh Kumar
Quoted 3 lines · Kukjin Kim

Basically, this moving looks good to me, but should be re-worked based on for-next of samsung tree because this touches too many samsung stuff so this should be sent to upstream via samsung tree.

Quoted 6 lines
Quoted 3 lines

Hmm... Its already applied in Rafael's tree. But it doesn't mean that it can't be
moved to your tree if there is a issue.

Well, I'm dropping it. Please merge via the Samsung tree.

Oops, I missed, maybe I have no more chance to send this to upstream for upcoming merge window :-(

Rafael, please take this patch with my ack in your tree, sorry for noise.

If any problems, please kindly let me know.

Thanks.

- Kukjin

#16 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 14 lines · Kukjin Kim
Quoted 6 lines · Rafael J. Wysocki
Quoted 5 lines · Viresh Kumar
Quoted 3 lines · Kukjin Kim

Basically, this moving looks good to me, but should be re-worked based on for-next of samsung tree because this touches too many samsung stuff so this should be sent to upstream via samsung tree.

Quoted 6 lines
Quoted 3 lines

Hmm... Its already applied in Rafael's tree. But it doesn't mean that it can't be
moved to your tree if there is a issue.

Well, I'm dropping it. Please merge via the Samsung tree.

Quoted 8 lines

Oops, I missed, maybe I have no more chance to send this to upstream for upcoming merge window :-(

Rafael, please take this patch with my ack in your tree, sorry for noise.

If any problems, please kindly let me know.

Well, I suppose I can take the original patch, but then it will conflict with your tree during merge. Is that not a problem?

Rafael

Signature · 2 lines
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
#17 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

On 04/24/13 07:59, Rafael J. Wysocki wrote:

[...]

Quoted 9 lines
Quoted 5 lines

Rafael, please take this patch with my ack in your tree, sorry for noise.

If any problems, please kindly let me know.

Well, I suppose I can take the original patch, but then it will conflict with your tree during merge. Is that not a problem?

I think, some conflicts can be occurred but if so, we can fix it before merge window.

- Kukjin

#18 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 8 lines · Kukjin Kim

On 04/24/13 07:59, Rafael J. Wysocki wrote:

[...]

Quoted 4 lines
Quoted 4 lines

Rafael, please take this patch with my ack in your tree, sorry for noise.

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

If any problems, please kindly let me know.

Well, I suppose I can take the original patch, but then it will conflict with your tree during merge. Is that not a problem?

I think, some conflicts can be occurred but if so, we can fix it before merge window.

Well, how exactly would you like to address them?

Rafael

Signature · 2 lines
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
author maintainer
#19 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

In reply to Kukjin Kim
Quoted 21 lines · Kukjin Kim
Quoted 12 lines · Rafael J. Wysocki
Quoted 10 lines · Viresh Kumar
Quoted 6 lines · Kukjin Kim

Basically, this moving looks good to me, but should be re-worked based on
for-next of samsung tree because this touches too many samsung stuff so this
should be sent to upstream via samsung tree.

Quoted 7 lines
Quoted 3 lines

Hmm... Its already applied in Rafael's tree. But it doesn't mean that it can't be
moved to your tree if there is a issue.

Well, I'm dropping it. Please merge via the Samsung tree.

Quoted 8 lines

Oops, I missed, maybe I have no more chance to send this to upstream for upcoming merge window :-(

Rafael, please take this patch with my ack in your tree, sorry for noise.

If any problems, please kindly let me know.

Who is going to pick this patch now for next merge window?

#20 lore raw

Why rpm_idle called in rpm_resume ?

Hi, All,

Recently, I'm reviewing the runtime implementation, there is one logical puzzle me a lot, can you help to explain ?

See below, if rpm_callback called with successful return in rpm_resume, rpm_idle will be called, what's the purpose on it ? The device just comeback to active, why call rpm_idle to try to suspend it ? static int rpm_resume(struct device *dev, int rpmflags)

{
    ...
    retval = rpm_callback(callback, dev);
    if (retval) {
        ...
    } else {
        __update_runtime_status(dev, RPM_ACTIVE)
        ...
    }
    if (!retval)
        rpm_idle(dev, RPM_ASYNC);
    ....
}
#21 lore raw

Re: Why rpm_idle called in rpm_resume ?

Quoted 4 lines · Feng Hong

Hi, All,

Recently, I'm reviewing the runtime implementation, there is one logical puzzle me a lot, can you help to explain ?

That's because the resume may be spurious and in fact it may be possible to suspend the device again, which we want to happen if so.

Thanks,
Rafael

Quoted 19 lines

See below, if rpm_callback called with successful return in rpm_resume, rpm_idle will be called, what's the purpose on it ? The device just comeback to active, why call rpm_idle to try to suspend it ? static int rpm_resume(struct device *dev, int rpmflags)

{
    ...
    retval = rpm_callback(callback, dev);
    if (retval) {
        ...
    } else {
        __update_runtime_status(dev, RPM_ACTIVE)
        ...
    }
    if (!retval)
        rpm_idle(dev, RPM_ASYNC);
    ....
}

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 2 lines
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
#22 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar
Quoted 25 lines · Viresh Kumar
Quoted 24 lines · Kukjin Kim
Quoted 12 lines · Rafael J. Wysocki
Quoted 10 lines · Viresh Kumar
Quoted 6 lines · Kukjin Kim

Basically, this moving looks good to me, but should be re-worked based on
for-next of samsung tree because this touches too many samsung stuff so this
should be sent to upstream via samsung tree.

Quoted 7 lines
Quoted 3 lines

Hmm... Its already applied in Rafael's tree. But it doesn't mean that it can't be
moved to your tree if there is a issue.

Well, I'm dropping it. Please merge via the Samsung tree.

Oops, I missed, maybe I have no more chance to send this to upstream for upcoming merge window :-(

Quoted 7 lines
Quoted 5 lines

Rafael, please take this patch with my ack in your tree, sorry for noise.

If any problems, please kindly let me know.

Who is going to pick this patch now for next merge window?

That doesn't matter I suppose. I can take it, but please rebase it on top of current linux-next.

Thanks,
Rafael

Signature · 2 lines
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
author maintainer Acked-by Arnd Bergmann
#23 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 2 lines · Rafael J. Wysocki

That doesn't matter I suppose. I can take it, but please rebase it on top of current linux-next.

I have already done that (attached). But i wasn't sure what Kukjin wants as he may report conflicts again and i will ask the same question for 3.12 :)

--
viresh

From 462f8b87e9fc617dad1d1d8daad2602952ef141a Mon Sep 17 00:00:00 2001
Message-Id: <462f8b87e9fc617dad1d1d8daad2602952ef141a.1368441897.git.viresh.kumar@linaro.org>
From: Viresh Kumar <[email protected]>
Date: Thu, 4 Apr 2013 12:54:15 +0000
Subject: [PATCH] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to drivers/cpufreq.

---
 arch/arm/Kconfig                                   | 47 ---------------
 arch/arm/mach-s3c24xx/Kconfig                      | 66 +++++++++-------------
 arch/arm/mach-s3c24xx/Makefile                     |  6 --
 arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |  0
 arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |  2 +-
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 ++--
 arch/arm/plat-samsung/include/plat/cpu-freq.h      |  6 +-
 drivers/cpufreq/Kconfig.arm                        | 58 +++++++++++++++++++
 drivers/cpufreq/Makefile                           |  5 ++
 .../cpufreq/s3c2410-cpufreq.c                      |  0
 .../cpufreq/s3c2412-cpufreq.c                      |  3 +-
 .../cpufreq/s3c2440-cpufreq.c                      |  0
 .../cpufreq/s3c24xx-cpufreq-debugfs.c              |  0
 .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |  0
 14 files changed, 100 insertions(+), 103 deletions(-)
 rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
arch/arm/Kconfig +0 -47
index f95674a..b5afdf6 100644
@@ -2055,53 +2055,6 @@ menu "CPU Power Management"
 
 if ARCH_HAS_CPUFREQ
 source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_S3C
-	bool
-	help
-	  Internal configuration node for common cpufreq on Samsung SoC
-
-config CPU_FREQ_S3C24XX
-	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C24XX && CPU_FREQ
-	select CPU_FREQ_S3C
-	help
-	  This enables the CPUfreq driver for the Samsung S3C24XX family
-	  of CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
-config CPU_FREQ_S3C24XX_PLL
-	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Compile in support for changing the PLL frequency from the
-	  S3C24XX series CPUfreq driver. The PLL takes time to settle
-	  after a frequency change, so by default it is not enabled.
-
-	  This also means that the PLL tables for the selected CPU(s) will
-	  be built which may increase the size of the kernel image.
-
-config CPU_FREQ_S3C24XX_DEBUG
-	bool "Debug CPUfreq Samsung driver core"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_IODEBUG
-	bool "Debug CPUfreq Samsung driver IO timing"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_DEBUGFS
-	bool "Export debugfs for CPUFreq"
-	depends on CPU_FREQ_S3C24XX && DEBUG_FS
-	help
-	  Export status information via debugfs.
-
 endif
 
 source "drivers/cpuidle/Kconfig"
arch/arm/mach-s3c24xx/Kconfig +27 -39

141 lines not on this page · raw message

arch/arm/mach-s3c24xx/Makefile +0 -6
index 6f46ecf..a3b495a 100644
@@ -17,13 +17,11 @@ obj-				:=
 obj-y				+= common.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpufreq-s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
@@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
@@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
-obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpufreq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
-
 #
 # machine support
 # following is ordered alphabetically by option text.
arch/arm/mach-s3c24xx/include/mach/s3c2412.h renamed from arch/arm/mach-s3c24xx/s3c2412.h +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/s3c2412.h
rename to arch/arm/mach-s3c24xx/include/mach/s3c2412.h
arch/arm/mach-s3c24xx/iotiming-s3c2412.c +1 -1
index 663436d..bd064c0 100644
@@ -31,7 +31,7 @@
 #include <plat/cpu-freq-core.h>
 #include <plat/clock.h>
 
-#include "s3c2412.h"
+#include <mach/s3c2412.h>
 
 #define print_ns(x) ((x) / 10), ((x) % 10)
 
arch/arm/plat-samsung/include/plat/cpu-freq-core.h +5 -5
index a0eac6f8..126fce4 100644
@@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
 extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
 extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
 #define s3c_cpufreq_debugfs_call(x) x
 #else
 #define s3c_cpufreq_debugfs_call(x) NULL
@@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
 #define s3c2412_iotiming_set NULL
 #endif /* CONFIG_S3C2412_IOTIMING */
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
 #else
 #define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG
 #define s3c_freq_iodbg(x...) printk(KERN_INFO x)
 #else
 #define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */
 
 static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
 				      int index, size_t table_size,
arch/arm/plat-samsung/include/plat/cpu-freq.h +3 -3
index 80c4a80..85517ab 100644
@@ -126,7 +126,7 @@ struct s3c_cpufreq_board {
 };
 
 /* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
 #define __init_or_cpufreq
 #else
 #define __init_or_cpufreq __init
@@ -134,7 +134,7 @@ struct s3c_cpufreq_board {
 
 /* Board functions */
 
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
 extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
 #else
 
@@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
 {
 	return 0;
 }
-#endif  /* CONFIG_CPU_FREQ_S3C */
+#endif  /* CONFIG_ARM_S3C_CPUFREQ */
drivers/cpufreq/Kconfig.arm +58 -0

70 lines not on this page · raw message

drivers/cpufreq/Makefile +5 -0
index db280b2..e6bd181 100644
@@ -65,7 +65,12 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA27x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
+obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
+obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
drivers/cpufreq/s3c2410-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2410.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
rename to drivers/cpufreq/s3c2410-cpufreq.c
drivers/cpufreq/s3c2412-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2412.c +1 -2
similarity index 99%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
rename to drivers/cpufreq/s3c2412-cpufreq.c
index 8bf0f3a..4645b48 100644
@@ -25,13 +25,12 @@
 #include <asm/mach/map.h>
 
 #include <mach/regs-clock.h>
+#include <mach/s3c2412.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/cpu-freq-core.h>
 
-#include "s3c2412.h"
-
 /* our clock resources. */
 static struct clk *xtal;
 static struct clk *fclk;
drivers/cpufreq/s3c2440-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2440.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
rename to drivers/cpufreq/s3c2440-cpufreq.c
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c renamed from arch/arm/mach-s3c24xx/cpufreq-debugfs.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-debugfs.c
rename to drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
drivers/cpufreq/s3c24xx-cpufreq.c renamed from arch/arm/mach-s3c24xx/cpufreq.c +0 -0
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq.c
rename to drivers/cpufreq/s3c24xx-cpufreq.c
Signature · 1 line
1.7.12.rc2.18.g61b472e
#24 lore raw

RE: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 10 lines · Viresh Kumar
Quoted 1 line · Rafael J. Wysocki

That doesn't matter I suppose. I can take it, but please rebase it on

top

Quoted 1 line

of current linux-next.

I have already done that (attached). But i wasn't sure what Kukjin wants as
he may report conflicts again and i will ask the same question for 3.12 :)

Since this missed last time, this would be sent to upstream via samsung tree again. It means the conflicts should be handled by myself.

Rafael, if you don't mind, let me take this into Samsung tree for v3.11.

- Kukjin

#25 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 7 lines · Kukjin Kim
Quoted 6 lines · Viresh Kumar
Quoted 1 line · Rafael J. Wysocki

That doesn't matter I suppose. I can take it, but please rebase it on

top

Quoted 1 line

of current linux-next.

Quoted 8 lines
Quoted 4 lines

I have already done that (attached). But i wasn't sure what Kukjin wants as
he may report conflicts again and i will ask the same question for 3.12 :)

Since this missed last time, this would be sent to upstream via samsung tree again. It means the conflicts should be handled by myself.

Rafael, if you don't mind, let me take this into Samsung tree for v3.11.

Sure, please go ahead.

Thanks,
Rafael

Signature · 2 lines
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
author maintainer
#26 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

Quoted 12 lines · Rafael J. Wysocki
Quoted 11 lines · Kukjin Kim
Quoted 10 lines · Viresh Kumar
Quoted 1 line · Rafael J. Wysocki

That doesn't matter I suppose. I can take it, but please rebase it on

top

Quoted 1 line

of current linux-next.

I have already done that (attached). But i wasn't sure what Kukjin wants as
he may report conflicts again and i will ask the same question for 3.12 :)

Quoted 6 lines
Quoted 4 lines

Since this missed last time, this would be sent to upstream via samsung tree again. It means the conflicts should be handled by myself.

Rafael, if you don't mind, let me take this into Samsung tree for v3.11.

Sure, please go ahead.

Kukjin,

I hope you have already applied this for linux-next?

#27 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

On 05/20/13 14:29, Viresh Kumar wrote:

[...]

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Rafael, if you don't mind, let me take this into Samsung tree for v3.11.

Sure, please go ahead.

Kukjin,

I hope you have already applied this for linux-next?

Yeah, already done in my local and you can see it in my public tree in a couple of hours :-)

Thanks.

- Kukjin

author maintainer
#28 lore raw

Re: [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar
Quoted 26 lines · Viresh Kumar
Quoted 3 lines · Kukjin Kim

Basically, this moving looks good to me, but should be re-worked based on for-next of samsung tree because this touches too many samsung stuff so this should be sent to upstream via samsung tree.

Hmm... Its already applied in Rafael's tree. But it doesn't mean that it can't be
moved to your tree if there is a issue.

What tree/branch? I used:

git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git for-next

Quoted 3 lines

Applying: cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
error: patch failed: arch/arm/Kconfig:2166
error: arch/arm/Kconfig: patch does not apply

above two are obvious as you haven't applied other patches in this series.

Quoted 6 lines

error: patch failed: arch/arm/mach-s3c24xx/Kconfig:28
error: arch/arm/mach-s3c24xx/Kconfig: patch does not apply
error: patch failed: arch/arm/mach-s3c24xx/Makefile:17
error: arch/arm/mach-s3c24xx/Makefile: patch does not apply
error: patch failed: drivers/cpufreq/Makefile:63
error: drivers/cpufreq/Makefile: patch does not apply

Quoted 7 lines

Same here.

Quoted 1 line

error: drivers/cpufreq/s3c2412-cpufreq.c: does not exist in index

I can still see it in for-next.

Attached is my patch based of your for-next

Kukjin,

As Rafael has already dropped it, can you apply it at your end and make sure it doesn't miss the merge cycle?

author maintainer
#29 lore raw

PATCH 8/18 cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq.

---
 arch/arm/Kconfig                                   |  8 -------
 arch/arm/mach-sa1100/Kconfig                       | 26 +++++++++++-----------
 arch/arm/mach-sa1100/Makefile                      |  3 ---
 arch/arm/mach-sa1100/include/mach/generic.h        |  1 +
 drivers/cpufreq/Kconfig.arm                        |  6 +++++
 drivers/cpufreq/Makefile                           |  2 ++
 .../cpufreq/sa1100-cpufreq.c                       |  3 +--
 .../cpufreq/sa1110-cpufreq.c                       |  3 +--
 8 files changed, 24 insertions(+), 28 deletions(-)
 create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h
 rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%)
 rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%)
arch/arm/Kconfig +0 -8
index 70366b7..bbc8953 100644
@@ -2150,7 +2150,6 @@ endmenu
 menu "CPU Power Management"
 
 if ARCH_HAS_CPUFREQ
-
 source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_IMX
@@ -2159,13 +2158,6 @@ config CPU_FREQ_IMX
 	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
-
-config CPU_FREQ_SA1100
-	bool
-
-config CPU_FREQ_SA1110
-	bool
-
 endif
 
 source "drivers/cpuidle/Kconfig"
arch/arm/mach-sa1100/Kconfig +13 -13
index ca14dbd..04f9784 100644
@@ -4,7 +4,7 @@ menu "SA11x0 Implementations"
 
 config SA1100_ASSABET
 	bool "Assabet"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
 	  Microprocessor Development Board (also known as the Assabet).
@@ -20,7 +20,7 @@ config ASSABET_NEPONSET
 
 config SA1100_CERF
 	bool "CerfBoard"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
 	  More information is available at:
@@ -47,7 +47,7 @@ endchoice
 
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SHARP_LOCOMO
 	select SHARP_PARAM
 	select SHARP_SCOOP
@@ -56,7 +56,7 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -67,7 +67,7 @@ config SA1100_H3100
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -78,7 +78,7 @@ config SA1100_H3600
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Laboratories
@@ -86,7 +86,7 @@ config SA1100_BADGE4
 
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
@@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP
 
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here to support the HackKit Core CPU Board
 	  <http://hackkit.eletztrick.de>;
 
 config SA1100_LART
 	bool "LART"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
 	  (also known as the LART).  See <http://www.lartmaker.nl/> for
@@ -120,7 +120,7 @@ config SA1100_LART
 
 config SA1100_NANOENGINE
 	bool "nanoEngine"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select PCI
 	select PCI_NANOENGINE
 	help
@@ -130,7 +130,7 @@ config SA1100_NANOENGINE
 
 config SA1100_PLEB
 	bool "PLEB"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using version 1 of the Portable Linux
 	  Embedded Board (also known as PLEB).
@@ -139,7 +139,7 @@ config SA1100_PLEB
 
 config SA1100_SHANNON
 	bool "Shannon"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
 	  limited edition webphone produced by Philips. The Shannon is a SA1100
@@ -148,7 +148,7 @@ config SA1100_SHANNON
 
 config SA1100_SIMPAD
 	bool "Simpad"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
 	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
arch/arm/mach-sa1100/Makefile +0 -3
index 1aed9e7..2732eef 100644
@@ -8,9 +8,6 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-obj-$(CONFIG_CPU_FREQ_SA1100)		+= cpu-sa1100.o
-obj-$(CONFIG_CPU_FREQ_SA1110)		+= cpu-sa1110.o
-
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
arch/arm/mach-sa1100/include/mach/generic.h new file +1 -0
new file mode 100644
index 0000000..665542e
@@ -0,0 +1 @@
+#include "../../generic.h"
drivers/cpufreq/Kconfig.arm +6 -0
index 1ce61ba..f3f3b14 100644
@@ -185,6 +185,12 @@ config ARM_S5PV210_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_SA1100_CPUFREQ
+	bool
+
+config ARM_SA1110_CPUFREQ
+	bool
+
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR
drivers/cpufreq/Makefile +2 -0
index a55e3e8..7356e0a 100644
@@ -71,6 +71,8 @@ obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
+obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
+obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 
drivers/cpufreq/sa1100-cpufreq.c renamed from arch/arm/mach-sa1100/cpu-sa1100.c +1 -2
similarity index 99%
rename from arch/arm/mach-sa1100/cpu-sa1100.c
rename to drivers/cpufreq/sa1100-cpufreq.c
index 3268761..cff18e8 100644
@@ -91,10 +91,9 @@
 
 #include <asm/cputype.h>
 
+#include <mach/generic.h>
 #include <mach/hardware.h>
 
-#include "generic.h"
-
 struct sa1100_dram_regs {
 	int speed;
 	u32 mdcnfg;
drivers/cpufreq/sa1110-cpufreq.c renamed from arch/arm/mach-sa1100/cpu-sa1110.c +1 -2
similarity index 99%
rename from arch/arm/mach-sa1100/cpu-sa1110.c
rename to drivers/cpufreq/sa1110-cpufreq.c
index 38a7733..39c90b6 100644
@@ -27,10 +27,9 @@
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
 
+#include <mach/generic.h>
 #include <mach/hardware.h>
 
-#include "generic.h"
-
 #undef DEBUG
 
 struct sdram_params {
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#30 lore raw

PATCH 9/18 cpufreq: AVR32: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of AVR32 based at32ap platform to drivers/cpufreq.

---
 arch/avr32/Kconfig                                          | 13 -------------
 arch/avr32/configs/atngw100_defconfig                       |  2 +-
 arch/avr32/configs/atngw100_evklcd100_defconfig             |  2 +-
 arch/avr32/configs/atngw100_evklcd101_defconfig             |  2 +-
 arch/avr32/configs/atngw100_mrmt_defconfig                  |  2 +-
 arch/avr32/configs/atngw100mkii_defconfig                   |  2 +-
 arch/avr32/configs/atngw100mkii_evklcd100_defconfig         |  2 +-
 arch/avr32/configs/atngw100mkii_evklcd101_defconfig         |  2 +-
 arch/avr32/configs/atstk1002_defconfig                      |  2 +-
 arch/avr32/configs/atstk1003_defconfig                      |  2 +-
 arch/avr32/configs/atstk1004_defconfig                      |  2 +-
 arch/avr32/configs/atstk1006_defconfig                      |  2 +-
 arch/avr32/configs/favr-32_defconfig                        |  2 +-
 arch/avr32/configs/hammerhead_defconfig                     |  2 +-
 arch/avr32/configs/mimc200_defconfig                        |  2 +-
 arch/avr32/mach-at32ap/Makefile                             |  1 -
 drivers/cpufreq/Kconfig                                     | 13 +++++++++++++
 drivers/cpufreq/Makefile                                    |  4 ++++
 .../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c           |  0
 19 files changed, 31 insertions(+), 28 deletions(-)
 rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)
arch/avr32/Kconfig +0 -13
index c1a868d..22c4030 100644
@@ -250,20 +250,7 @@ config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 
 menu "CPU Frequency scaling"
-
 source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_AT32AP
-	bool "CPU frequency driver for AT32AP"
-	depends on CPU_FREQ && PLATFORM_AT32AP
-	default n
-	help
-	  This enables the CPU frequency driver for AT32AP processors.
-
-	  For details, take a look in <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
 endmenu
 
 endmenu
arch/avr32/configs/atngw100_defconfig +1 -1
index f4025db..d5aff36 100644
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/atngw100_evklcd100_defconfig +1 -1
index c76a49b..4abcf43 100644
@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/atngw100_evklcd101_defconfig +1 -1
index 2d8ab08..18f3fa0 100644
@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/atngw100_mrmt_defconfig +1 -1
index b189e0c..06e389c 100644
@@ -23,7 +23,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
arch/avr32/configs/atngw100mkii_defconfig +1 -1
index 2e4de42..2518a13 100644
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/atngw100mkii_evklcd100_defconfig +1 -1
index fad3cd2..245ef6b 100644
@@ -29,7 +29,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/atngw100mkii_evklcd101_defconfig +1 -1
index 2998623..fa6cbac 100644
@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/atstk1002_defconfig +1 -1
index a582465..bbd5131 100644
@@ -25,7 +25,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/atstk1003_defconfig +1 -1
index 57a79df..c1cd726 100644
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/atstk1004_defconfig +1 -1
index 1a49bd8..754ae56 100644
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/atstk1006_defconfig +1 -1
index 206a1b6..58589d8 100644
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
arch/avr32/configs/favr-32_defconfig +1 -1
index 0421498..57788a4 100644
@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
arch/avr32/configs/hammerhead_defconfig +1 -1
index 82f24eb..ba7c31e 100644
@@ -31,7 +31,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
arch/avr32/configs/mimc200_defconfig +1 -1
index 1bee51f..0a8bfdc 100644
@@ -24,7 +24,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
arch/avr32/mach-at32ap/Makefile +0 -1
index 514c9a9..fc09ec4 100644
@@ -1,7 +1,6 @@
 obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
 obj-y				+= hmatrix.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
-obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
 obj-$(CONFIG_PM)		+= pm.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
drivers/cpufreq/Kconfig +13 -0
index cbcb21e..d7ce6cc 100644
@@ -205,6 +205,19 @@ depends on ARM
 source "drivers/cpufreq/Kconfig.arm"
 endmenu
 
+menu "AVR32 CPU frequency scaling drivers"
+depends on AVR32
+
+config AVR32_AT32AP_CPUFREQ
+	bool "CPU frequency driver for AT32AP"
+	depends on PLATFORM_AT32AP
+	default n
+	help
+	  This enables the CPU frequency driver for AT32AP processors.
+	  If in doubt, say N.
+
+endmenu
+
 menu "PowerPC CPU frequency scaling drivers"
 depends on PPC32 || PPC64
 source "drivers/cpufreq/Kconfig.powerpc"
drivers/cpufreq/Makefile +4 -0
index 7356e0a..36a93a6 100644
@@ -79,3 +79,7 @@ obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 ##################################################################################
 # PowerPC platform drivers
 obj-$(CONFIG_CPU_FREQ_MAPLE)		+= maple-cpufreq.o
+
+##################################################################################
+# Other platform drivers
+obj-$(CONFIG_AVR32_AT32AP_CPUFREQ)	+= at32ap-cpufreq.o
drivers/cpufreq/at32ap-cpufreq.c renamed from arch/avr32/mach-at32ap/cpufreq.c +0 -0
similarity index 100%
rename from arch/avr32/mach-at32ap/cpufreq.c
rename to drivers/cpufreq/at32ap-cpufreq.c
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#31 lore raw

PATCH 10/18 cpufreq: blackfin: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of BLACKFIN architecture to drivers/cpufreq.

Cc Mike Frysinger <[email protected]>
Cc uclinux-dist-devel-ZG0+EudsQA8dtHy/[email protected]
---
 arch/blackfin/mach-common/Makefile                                       | 1 -
 drivers/cpufreq/Makefile                                                 | 1 +
 .../blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c | 0
 3 files changed, 1 insertion(+), 1 deletion(-)
 rename arch/blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c (100%)
arch/blackfin/mach-common/Makefile +0 -1
index 75f0ba2..675466d 100644
@@ -10,7 +10,6 @@ obj-$(CONFIG_PM)          += pm.o
 ifneq ($(CONFIG_BF60x),y)
 obj-$(CONFIG_PM)	  += dpmc_modes.o
 endif
-obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
 obj-$(CONFIG_SMP)         += smp.o
 obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
drivers/cpufreq/Makefile +1 -0
index 36a93a6..19de776 100644
@@ -83,3 +83,4 @@ obj-$(CONFIG_CPU_FREQ_MAPLE)		+= maple-cpufreq.o
 ##################################################################################
 # Other platform drivers
 obj-$(CONFIG_AVR32_AT32AP_CPUFREQ)	+= at32ap-cpufreq.o
+obj-$(CONFIG_BLACKFIN)			+= blackfin-cpufreq.o
drivers/cpufreq/blackfin-cpufreq.c renamed from arch/blackfin/mach-common/cpufreq.c +0 -0
similarity index 100%
rename from arch/blackfin/mach-common/cpufreq.c
rename to drivers/cpufreq/blackfin-cpufreq.c
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#32 lore raw

PATCH 11/18 cpufreq: cris: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq drivers of CRIS architecture to drivers/cpufreq.

---
 arch/cris/arch-v32/mach-a3/Makefile                                     | 1 -
 arch/cris/arch-v32/mach-fs/Makefile                                     | 1 -
 drivers/cpufreq/Makefile                                                | 2 ++
 .../mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c         | 0
 .../mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c         | 0
 5 files changed, 2 insertions(+), 2 deletions(-)
 rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%)
 rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%)
arch/cris/arch-v32/mach-a3/Makefile +0 -1
index d366e08..18a2271 100644
@@ -3,7 +3,6 @@
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
 
arch/cris/arch-v32/mach-fs/Makefile +0 -1
index d366e08..18a2271 100644
@@ -3,7 +3,6 @@
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
 
drivers/cpufreq/Makefile +2 -0
index 19de776..751815d 100644
@@ -84,3 +84,5 @@ obj-$(CONFIG_CPU_FREQ_MAPLE)		+= maple-cpufreq.o
 # Other platform drivers
 obj-$(CONFIG_AVR32_AT32AP_CPUFREQ)	+= at32ap-cpufreq.o
 obj-$(CONFIG_BLACKFIN)			+= blackfin-cpufreq.o
+obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
+obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
drivers/cpufreq/cris-artpec3-cpufreq.c renamed from arch/cris/arch-v32/mach-a3/cpufreq.c +0 -0
similarity index 100%
rename from arch/cris/arch-v32/mach-a3/cpufreq.c
rename to drivers/cpufreq/cris-artpec3-cpufreq.c
drivers/cpufreq/cris-etraxfs-cpufreq.c renamed from arch/cris/arch-v32/mach-fs/cpufreq.c +0 -0
similarity index 100%
rename from arch/cris/arch-v32/mach-fs/cpufreq.c
rename to drivers/cpufreq/cris-etraxfs-cpufreq.c
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#33 lore raw

PATCH 12/18 cpufreq: ia64: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of IA64 architecture to drivers/cpufreq.

---
 arch/ia64/Kconfig                                  |  6 ++---
 arch/ia64/kernel/Makefile                          |  1 -
 arch/ia64/kernel/cpufreq/Kconfig                   | 29 ----------------------
 arch/ia64/kernel/cpufreq/Makefile                  |  2 --
 drivers/cpufreq/Kconfig                            | 17 +++++++++++++
 drivers/cpufreq/Makefile                           |  1 +
 .../cpufreq/ia64-acpi-cpufreq.c                    |  1 -
 7 files changed, 21 insertions(+), 36 deletions(-)
 delete mode 100644 arch/ia64/kernel/cpufreq/Kconfig
 delete mode 100644 arch/ia64/kernel/cpufreq/Makefile
 rename arch/ia64/kernel/cpufreq/acpi-cpufreq.c => drivers/cpufreq/ia64-acpi-cpufreq.c (99%)
arch/ia64/Kconfig +3 -3
index 9a02f71..152b5f2 100644
@@ -591,9 +591,9 @@ source "kernel/power/Kconfig"
 source "drivers/acpi/Kconfig"
 
 if PM
-
-source "arch/ia64/kernel/cpufreq/Kconfig"
-
+menu "CPU Frequency scaling"
+source "drivers/cpufreq/Kconfig"
+endmenu
 endif
 
 endmenu
arch/ia64/kernel/Makefile +0 -1
index d959c84..20678a9 100644
@@ -23,7 +23,6 @@ obj-$(CONFIG_SMP)		+= smp.o smpboot.o
 obj-$(CONFIG_NUMA)		+= numa.o
 obj-$(CONFIG_PERFMON)		+= perfmon_default_smpl.o
 obj-$(CONFIG_IA64_CYCLONE)	+= cyclone.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_IA64_MCA_RECOVERY)	+= mca_recovery.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o jprobes.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
arch/ia64/kernel/cpufreq/Kconfig deleted +0 -29
deleted file mode 100644
index 2d9d527..0000000
@@ -1,29 +0,0 @@
-
-#
-# CPU Frequency scaling
-#
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config IA64_ACPI_CPUFREQ
-	tristate "ACPI Processor P-States driver"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	This driver adds a CPUFreq driver which utilizes the ACPI
-	Processor Performance States.
-
-	For details, take a look at <file:Documentation/cpu-freq/>.
-
-	If in doubt, say N.
-
-endif   # CPU_FREQ
-
-endmenu
-
arch/ia64/kernel/cpufreq/Makefile deleted +0 -2
deleted file mode 100644
index 4838f2a..0000000
@@ -1,2 +0,0 @@
-obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= acpi-cpufreq.o
-
drivers/cpufreq/Kconfig +17 -0
index d7ce6cc..a2f1600 100644
@@ -218,6 +218,23 @@ config AVR32_AT32AP_CPUFREQ
 
 endmenu
 
+menu "CPUFreq processor drivers"
+depends on IA64
+
+config IA64_ACPI_CPUFREQ
+	tristate "ACPI Processor P-States driver"
+	select CPU_FREQ_TABLE
+	depends on ACPI_PROCESSOR
+	help
+	This driver adds a CPUFreq driver which utilizes the ACPI
+	Processor Performance States.
+
+	For details, take a look at <file:Documentation/cpu-freq/>.
+
+	If in doubt, say N.
+
+endmenu
+
 menu "PowerPC CPU frequency scaling drivers"
 depends on PPC32 || PPC64
 source "drivers/cpufreq/Kconfig.powerpc"
drivers/cpufreq/Makefile +1 -0
index 751815d..aaa018c 100644
@@ -86,3 +86,4 @@ obj-$(CONFIG_AVR32_AT32AP_CPUFREQ)	+= at32ap-cpufreq.o
 obj-$(CONFIG_BLACKFIN)			+= blackfin-cpufreq.o
 obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
+obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
drivers/cpufreq/ia64-acpi-cpufreq.c renamed from arch/ia64/kernel/cpufreq/acpi-cpufreq.c +0 -1
similarity index 99%
rename from arch/ia64/kernel/cpufreq/acpi-cpufreq.c
rename to drivers/cpufreq/ia64-acpi-cpufreq.c
index 4700fef..c0075db 100644
@@ -1,5 +1,4 @@
 /*
- * arch/ia64/kernel/cpufreq/acpi-cpufreq.c
  * This file provides the ACPI based P-state support. This
  * module works with generic cpufreq infrastructure. Most of
  * the code is based on i386 version
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#34 lore raw

PATCH 13/18 cpufreq: mips: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of MIPS architecture to drivers/cpufreq.

---
 arch/mips/Kconfig                                  |  9 ++++-
 arch/mips/kernel/Makefile                          |  2 --
 arch/mips/kernel/cpufreq/Kconfig                   | 41 ----------------------
 arch/mips/kernel/cpufreq/Makefile                  |  5 ---
 drivers/cpufreq/Kconfig                            | 18 ++++++++++
 drivers/cpufreq/Makefile                           |  1 +
 .../kernel => drivers}/cpufreq/loongson2_cpufreq.c |  0
 7 files changed, 27 insertions(+), 49 deletions(-)
 delete mode 100644 arch/mips/kernel/cpufreq/Kconfig
 delete mode 100644 arch/mips/kernel/cpufreq/Makefile
 rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)
arch/mips/Kconfig +8 -1
index cd2e21f..22e8417 100644
@@ -2539,7 +2539,14 @@ source "kernel/power/Kconfig"
 
 endmenu
 
-source "arch/mips/kernel/cpufreq/Kconfig"
+config MIPS_EXTERNAL_TIMER
+	bool
+
+if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
+menu "CPU Power Management"
+source "drivers/cpufreq/Kconfig"
+endmenu
+endif
 
 source "net/Kconfig"
 
arch/mips/kernel/Makefile +0 -2
index f81d98f..c69ca65 100644
@@ -92,8 +92,6 @@ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n
 
 obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o
 
-obj-$(CONFIG_MIPS_CPUFREQ)	+= cpufreq/
-
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 
arch/mips/kernel/cpufreq/Kconfig deleted +0 -41

41 lines not on this page · raw message

arch/mips/kernel/cpufreq/Makefile deleted +0 -5
deleted file mode 100644
index 05a5715..0000000
@@ -1,5 +0,0 @@
-#
-# Makefile for the Linux/MIPS cpufreq.
-#
-
-obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
drivers/cpufreq/Kconfig +18 -0
index a2f1600..5030df5 100644
@@ -235,6 +235,24 @@ config IA64_ACPI_CPUFREQ
 
 endmenu
 
+menu "MIPS CPUFreq processor drivers"
+depends on MIPS
+
+config LOONGSON2_CPUFREQ
+	tristate "Loongson2 CPUFreq Driver"
+	select CPU_FREQ_TABLE
+	help
+	  This option adds a CPUFreq driver for loongson processors which
+	  support software configurable cpu frequency.
+
+	  Loongson2F and it's successors support this feature.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+endmenu
+
 menu "PowerPC CPU frequency scaling drivers"
 depends on PPC32 || PPC64
 source "drivers/cpufreq/Kconfig.powerpc"
drivers/cpufreq/Makefile +1 -0
index aaa018c..f6226d1 100644
@@ -87,3 +87,4 @@ obj-$(CONFIG_BLACKFIN)			+= blackfin-cpufreq.o
 obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
+obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
drivers/cpufreq/loongson2_cpufreq.c renamed from arch/mips/kernel/cpufreq/loongson2_cpufreq.c +0 -0
similarity index 100%
rename from arch/mips/kernel/cpufreq/loongson2_cpufreq.c
rename to drivers/cpufreq/loongson2_cpufreq.c
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#35 lore raw

PATCH 14/18 cpufreq: sh: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.

---
 arch/sh/Kconfig                                        | 18 ------------------
 arch/sh/kernel/Makefile                                |  1 -
 drivers/cpufreq/Kconfig                                | 18 ++++++++++++++++++
 drivers/cpufreq/Makefile                               |  1 +
 .../kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c   |  2 --
 5 files changed, 19 insertions(+), 21 deletions(-)
 rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
arch/sh/Kconfig +0 -18
index 5e85963..06e3163 100644
@@ -624,25 +624,7 @@ config SH_CLK_CPG_LEGACY
 endmenu
 
 menu "CPU Frequency scaling"
-
 source "drivers/cpufreq/Kconfig"
-
-config SH_CPU_FREQ
-	tristate "SuperH CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the cpufreq driver for SuperH. Any CPU that supports
-	  clock rate rounding through the clock framework can use this
-	  driver. While it will make the kernel slightly larger, this is
-	  harmless for CPUs that don't support rate rounding. The driver
-	  will also generate a notice in the boot log before disabling
-	  itself if the CPU in question is not capable of rate rounding.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If unsure, say N.
-
 endmenu
 
 source "arch/sh/drivers/Kconfig"
arch/sh/kernel/Makefile +0 -1
index f259b37..261c8bf 100644
@@ -31,7 +31,6 @@ obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
-obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
 obj-$(CONFIG_MODULES)		+= sh_ksyms_$(BITS).o module.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
drivers/cpufreq/Kconfig +18 -0
index 5030df5..602d5db 100644
@@ -258,5 +258,23 @@ depends on PPC32 || PPC64
 source "drivers/cpufreq/Kconfig.powerpc"
 endmenu
 
+menu "SH CPU Frequency scaling"
+depends on SUPERH
+config SH_CPU_FREQ
+	tristate "SuperH CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the cpufreq driver for SuperH. Any CPU that supports
+	  clock rate rounding through the clock framework can use this
+	  driver. While it will make the kernel slightly larger, this is
+	  harmless for CPUs that don't support rate rounding. The driver
+	  will also generate a notice in the boot log before disabling
+	  itself if the CPU in question is not capable of rate rounding.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If unsure, say N.
+endmenu
+
 endif
 endmenu
drivers/cpufreq/Makefile +1 -0
index f6226d1..12607d9 100644
@@ -88,3 +88,4 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
+obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
drivers/cpufreq/sh-cpufreq.c renamed from arch/sh/kernel/cpufreq.c +0 -2
similarity index 99%
rename from arch/sh/kernel/cpufreq.c
rename to drivers/cpufreq/sh-cpufreq.c
index 88c8fee..73adb64 100644
@@ -1,6 +1,4 @@
 /*
- * arch/sh/kernel/cpufreq.c
- *
  * cpufreq driver for the SuperH processors.
  *
  * Copyright (C) 2002 - 2012 Paul Mundt
Signature · 1 line
1.7.12.rc2.18.g61b472e
#36 lore raw

Re: [PATCH 14/18] cpufreq: sh: move cpufreq driver to drivers/cpufreq

Quoted 1 line · Viresh Kumar

This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.

Why?

I am missing the cover email where I assume the explanation lies.

Quoted 115 lines
---
 arch/sh/Kconfig                                        | 18 ------------------
 arch/sh/kernel/Makefile                                |  1 -
 drivers/cpufreq/Kconfig                                | 18 ++++++++++++++++++
 drivers/cpufreq/Makefile                               |  1 +
 .../kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c   |  2 --
 5 files changed, 19 insertions(+), 21 deletions(-)
 rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
arch/sh/Kconfig +0 -18
index 5e85963..06e3163 100644
@@ -624,25 +624,7 @@ config SH_CLK_CPG_LEGACY
 endmenu
 
 menu "CPU Frequency scaling"
-
 source "drivers/cpufreq/Kconfig"
-
-config SH_CPU_FREQ
-	tristate "SuperH CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the cpufreq driver for SuperH. Any CPU that supports
-	  clock rate rounding through the clock framework can use this
-	  driver. While it will make the kernel slightly larger, this is
-	  harmless for CPUs that don't support rate rounding. The driver
-	  will also generate a notice in the boot log before disabling
-	  itself if the CPU in question is not capable of rate rounding.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If unsure, say N.
-
 endmenu
 
 source "arch/sh/drivers/Kconfig"
arch/sh/kernel/Makefile +0 -1
index f259b37..261c8bf 100644
@@ -31,7 +31,6 @@ obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
-obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
 obj-$(CONFIG_MODULES)		+= sh_ksyms_$(BITS).o module.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
drivers/cpufreq/Kconfig +18 -0
index 5030df5..602d5db 100644
@@ -258,5 +258,23 @@ depends on PPC32 || PPC64
 source "drivers/cpufreq/Kconfig.powerpc"
 endmenu
 
+menu "SH CPU Frequency scaling"
+depends on SUPERH
+config SH_CPU_FREQ
+	tristate "SuperH CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the cpufreq driver for SuperH. Any CPU that supports
+	  clock rate rounding through the clock framework can use this
+	  driver. While it will make the kernel slightly larger, this is
+	  harmless for CPUs that don't support rate rounding. The driver
+	  will also generate a notice in the boot log before disabling
+	  itself if the CPU in question is not capable of rate rounding.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If unsure, say N.
+endmenu
+
 endif
 endmenu
drivers/cpufreq/Makefile +1 -0
index f6226d1..12607d9 100644
@@ -88,3 +88,4 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
+obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
drivers/cpufreq/sh-cpufreq.c renamed from arch/sh/kernel/cpufreq.c +0 -2
similarity index 99%
rename from arch/sh/kernel/cpufreq.c
rename to drivers/cpufreq/sh-cpufreq.c
index 88c8fee..73adb64 100644
@@ -1,6 +1,4 @@
 /*
- * arch/sh/kernel/cpufreq.c
- *
  * cpufreq driver for the SuperH processors.
  *
  * Copyright (C) 2002 - 2012 Paul Mundt
Signature · 6 lines
1.7.12.rc2.18.g61b472e

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
author maintainer
#37 lore raw

Re: [PATCH 14/18] cpufreq: sh: move cpufreq driver to drivers/cpufreq

Quoted 6 lines · Simon Horman
Quoted 1 line · Viresh Kumar

This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.

Why?

I am missing the cover email where I assume the explanation lies.

Hi Simon,

The idea was to keep all cpufreq drivers at a common and most suitable place, so that future consolidation work can be done easily and efficiently.

So, functionally this patch shouldn't change anything.

#38 lore raw

Re: [PATCH 14/18] cpufreq: sh: move cpufreq driver to drivers/cpufreq

Quoted 6 lines · Viresh Kumar
Quoted 5 lines · Simon Horman
Quoted 1 line · Viresh Kumar

This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.

Why?

Quoted 8 lines
Quoted 1 line

I am missing the cover email where I assume the explanation lies.

Hi Simon,

The idea was to keep all cpufreq drivers at a common and most suitable place, so that future consolidation work can be done easily and efficiently.

So, functionally this patch shouldn't change anything.

Thanks, I understand.

I have no objections to this, but Paul should probably review it.

author maintainer
#39 lore raw

Re: [PATCH 14/18] cpufreq: sh: move cpufreq driver to drivers/cpufreq

Quoted 3 lines · Simon Horman

Thanks, I understand.

I have no objections to this, but Paul should probably review it.

It is already Acked by him and applied by Rafael.

#40 lore raw

Re: [PATCH 14/18] cpufreq: sh: move cpufreq driver to drivers/cpufreq

Quoted 6 lines · Viresh Kumar
Quoted 3 lines · Simon Horman

Thanks, I understand.

I have no objections to this, but Paul should probably review it.

It is already Acked by him and applied by Rafael.

:)

author maintainer
#41 lore raw

PATCH 15/18 cpufreq: unicore2: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of UNICORE-2 architecture to drivers/cpufreq.

---
 arch/unicore32/kernel/Makefile                                         | 1 -
 drivers/cpufreq/Makefile                                               | 1 +
 arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c | 2 +-
 3 files changed, 2 insertions(+), 2 deletions(-)
 rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%)
arch/unicore32/kernel/Makefile +0 -1
index fa497e0..607a72f 100644
@@ -9,7 +9,6 @@ obj-y				+= setup.o signal.o sys.o stacktrace.o traps.o
 obj-$(CONFIG_MODULES)		+= ksyms.o module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
-obj-$(CONFIG_CPU_FREQ)		+= cpu-ucv2.o
 obj-$(CONFIG_UNICORE_FPU_F64)	+= fpu-ucf64.o
 
 # obj-y for architecture PKUnity v3
drivers/cpufreq/Makefile +1 -0
index 12607d9..e47acff 100644
@@ -89,3 +89,4 @@ obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
 obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
+obj-$(CONFIG_UNICORE32)			+= unicore2-cpufreq.o
drivers/cpufreq/unicore2-cpufreq.c renamed from arch/unicore32/kernel/cpu-ucv2.c +1 -1
similarity index 96%
rename from arch/unicore32/kernel/cpu-ucv2.c
rename to drivers/cpufreq/unicore2-cpufreq.c
index ba5a71c..12fc904 100644
@@ -1,5 +1,5 @@
 /*
- * linux/arch/unicore32/kernel/cpu-ucv2.c: clock scaling for the UniCore-II
+ * clock scaling for the UniCore-II
  *
  * Code specific to PKUnity SoC and UniCore ISA
  *
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#42 lore raw

PATCH 16/18 cpufreq: sparc: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of SPARC architecture to drivers/cpufreq.

---
 arch/sparc/Kconfig                                 | 23 ----------------------
 arch/sparc/kernel/Makefile                         |  3 ---
 drivers/cpufreq/Kconfig                            | 23 ++++++++++++++++++++++
 drivers/cpufreq/Makefile                           |  2 ++
 .../cpufreq/sparc-us2e-cpufreq.c                   |  0
 .../cpufreq/sparc-us3-cpufreq.c                    |  0
 6 files changed, 25 insertions(+), 26 deletions(-)
 rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%)
 rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/sparc-us3-cpufreq.c (100%)
arch/sparc/Kconfig +0 -23
index 3d361f2..c85b761 100644
@@ -254,29 +254,6 @@ config HOTPLUG_CPU
 
 if SPARC64
 source "drivers/cpufreq/Kconfig"
-
-config US3_FREQ
-	tristate "UltraSPARC-III CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for UltraSPARC-III processors.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
-config US2E_FREQ
-	tristate "UltraSPARC-IIe CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
 endif
 
 config US3_MC
arch/sparc/kernel/Makefile +0 -3
index 6cf591b..5276fd4 100644
@@ -102,9 +102,6 @@ obj-$(CONFIG_PCI_MSI)        += pci_msi.o
 
 obj-$(CONFIG_COMPAT)         += sys32.o sys_sparc32.o signal32.o
 
-# sparc64 cpufreq
-obj-$(CONFIG_US3_FREQ)  += us3_cpufreq.o
-obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
 obj-$(CONFIG_US3_MC)    += chmc.o
 
 obj-$(CONFIG_KPROBES)   += kprobes.o
drivers/cpufreq/Kconfig +23 -0
index 602d5db..a1488f5 100644
@@ -258,6 +258,29 @@ depends on PPC32 || PPC64
 source "drivers/cpufreq/Kconfig.powerpc"
 endmenu
 
+menu "SPARC CPU frequency scaling drivers"
+depends on SPARC64
+config SPARC_US3_CPUFREQ
+	tristate "UltraSPARC-III CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for UltraSPARC-III processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config SPARC_US2E_CPUFREQ
+	tristate "UltraSPARC-IIe CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+endmenu
+
 menu "SH CPU Frequency scaling"
 depends on SUPERH
 config SH_CPU_FREQ
drivers/cpufreq/Makefile +2 -0
index e47acff..db96d74 100644
@@ -89,4 +89,6 @@ obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
 obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
+obj-$(CONFIG_SPARC_US2E_CPUFREQ)	+= sparc-us2e-cpufreq.o
+obj-$(CONFIG_SPARC_US3_CPUFREQ)		+= sparc-us3-cpufreq.o
 obj-$(CONFIG_UNICORE32)			+= unicore2-cpufreq.o
drivers/cpufreq/sparc-us2e-cpufreq.c renamed from arch/sparc/kernel/us2e_cpufreq.c +0 -0
similarity index 100%
rename from arch/sparc/kernel/us2e_cpufreq.c
rename to drivers/cpufreq/sparc-us2e-cpufreq.c
drivers/cpufreq/sparc-us3-cpufreq.c renamed from arch/sparc/kernel/us3_cpufreq.c +0 -0
similarity index 100%
rename from arch/sparc/kernel/us3_cpufreq.c
rename to drivers/cpufreq/sparc-us3-cpufreq.c
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#43 lore raw

PATCH 17/18 cpufreq: powerpc: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Olof Johansson <[email protected]>

---
Compile Tested only.

 arch/powerpc/platforms/Kconfig                     | 31 ----------------------
 arch/powerpc/platforms/pasemi/Makefile             |  1 -
 arch/powerpc/platforms/powermac/Makefile           |  2 --
 drivers/cpufreq/Kconfig.powerpc                    | 26 ++++++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |  0
 .../cpufreq/pmac32-cpufreq.c                       |  0
 .../cpufreq/pmac64-cpufreq.c                       |  0
 8 files changed, 29 insertions(+), 34 deletions(-)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
arch/powerpc/platforms/Kconfig +0 -31
index 52de8bc..46a223f 100644
@@ -194,37 +194,6 @@ config PPC_IO_WORKAROUNDS
 
 source "drivers/cpufreq/Kconfig"
 
-menu "CPU Frequency drivers"
-	depends on CPU_FREQ
-
-config CPU_FREQ_PMAC
-	bool "Support for Apple PowerBooks"
-	depends on ADB_PMU && PPC32
-	select CPU_FREQ_TABLE
-	help
-	  This adds support for frequency switching on Apple PowerBooks,
-	  this currently includes some models of iBook & Titanium
-	  PowerBook.
-
-config CPU_FREQ_PMAC64
-	bool "Support for some Apple G5s"
-	depends on PPC_PMAC && PPC64
-	select CPU_FREQ_TABLE
-	help
-	  This adds support for frequency switching on Apple iMac G5,
-	  and some of the more recent desktop G5 machines as well.
-
-config PPC_PASEMI_CPUFREQ
-	bool "Support for PA Semi PWRficient"
-	depends on PPC_PASEMI
-	default y
-	select CPU_FREQ_TABLE
-	help
-	  This adds the support for frequency switching on PA Semi
-	  PWRficient processors.
-
-endmenu
-
 menu "CPUIdle driver"
 
 source "drivers/cpuidle/Kconfig"
arch/powerpc/platforms/pasemi/Makefile +0 -1
index ce6d789..8e8d4ca 100644
@@ -1,3 +1,2 @@
 obj-y	+= setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o
 obj-$(CONFIG_PPC_PASEMI_MDIO)	+= gpio_mdio.o
-obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
arch/powerpc/platforms/powermac/Makefile +0 -2
index ea47df6..52c6ce1 100644
@@ -9,8 +9,6 @@ obj-y				+= pic.o setup.o time.o feature.o pci.o \
 				   sleep.o low_i2c.o cache.o pfunc_core.o \
 				   pfunc_base.o udbg_scc.o udbg_adb.o
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
-obj-$(CONFIG_CPU_FREQ_PMAC)	+= cpufreq_32.o
-obj-$(CONFIG_CPU_FREQ_PMAC64)	+= cpufreq_64.o
 # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really
 # need this to be a bool.  Cheat here and pretend CONFIG_NVRAM=m is really
 # CONFIG_NVRAM=y
drivers/cpufreq/Kconfig.powerpc +26 -0
index e76992f..2e5a007 100644
@@ -5,3 +5,29 @@ config CPU_FREQ_MAPLE
 	help
 	  This adds support for frequency switching on Maple 970FX
 	  Evaluation Board and compatible boards (IBM JS2x blades).
+
+config CPU_FREQ_PMAC
+	bool "Support for Apple PowerBooks"
+	depends on ADB_PMU && PPC32
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for frequency switching on Apple PowerBooks,
+	  this currently includes some models of iBook & Titanium
+	  PowerBook.
+
+config CPU_FREQ_PMAC64
+	bool "Support for some Apple G5s"
+	depends on PPC_PMAC && PPC64
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for frequency switching on Apple iMac G5,
+	  and some of the more recent desktop G5 machines as well.
+
+config PPC_PASEMI_CPUFREQ
+	bool "Support for PA Semi PWRficient"
+	depends on PPC_PASEMI
+	select CPU_FREQ_TABLE
+	default y
+	help
+	  This adds the support for frequency switching on PA Semi
+	  PWRficient processors.
drivers/cpufreq/Makefile +3 -0
index db96d74..7b16092f 100644
@@ -79,6 +79,9 @@ obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 ##################################################################################
 # PowerPC platform drivers
 obj-$(CONFIG_CPU_FREQ_MAPLE)		+= maple-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC)		+= pmac32-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC64)		+= pmac64-cpufreq.o
+obj-$(CONFIG_PPC_PASEMI_CPUFREQ)	+= pasemi-cpufreq.o
 
 ##################################################################################
 # Other platform drivers
drivers/cpufreq/pasemi-cpufreq.c renamed from arch/powerpc/platforms/pasemi/cpufreq.c +0 -0
similarity index 100%
rename from arch/powerpc/platforms/pasemi/cpufreq.c
rename to drivers/cpufreq/pasemi-cpufreq.c
drivers/cpufreq/pmac32-cpufreq.c renamed from arch/powerpc/platforms/powermac/cpufreq_32.c +0 -0
similarity index 100%
rename from arch/powerpc/platforms/powermac/cpufreq_32.c
rename to drivers/cpufreq/pmac32-cpufreq.c
drivers/cpufreq/pmac64-cpufreq.c renamed from arch/powerpc/platforms/powermac/cpufreq_64.c +0 -0
similarity index 100%
rename from arch/powerpc/platforms/powermac/cpufreq_64.c
rename to drivers/cpufreq/pmac64-cpufreq.c
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#44 lore raw

Re: [PATCH 17/18] cpufreq: powerpc: move cpufreq driver to drivers/cpufreq

Quoted 10 lines · Viresh Kumar

This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Olof Johansson <[email protected]>

---
Compile Tested only.

Quoted 12 lines
 arch/powerpc/platforms/Kconfig                     | 31 ----------------------
 arch/powerpc/platforms/pasemi/Makefile             |  1 -
 arch/powerpc/platforms/powermac/Makefile           |  2 --
 drivers/cpufreq/Kconfig.powerpc                    | 26 ++++++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |  0
 .../cpufreq/pmac32-cpufreq.c                       |  0
 .../cpufreq/pmac64-cpufreq.c                       |  0
 8 files changed, 29 insertions(+), 34 deletions(-)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)

Hi Deepthi,

Can you help testing this please?

author maintainer
#45 lore raw

Re: [PATCH 17/18] cpufreq: powerpc: move cpufreq driver to drivers/cpufreq

Quoted 24 lines · Viresh Kumar
Quoted 10 lines · Viresh Kumar

This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Olof Johansson <[email protected]>

---
Compile Tested only.

Quoted 12 lines
 arch/powerpc/platforms/Kconfig                     | 31 ----------------------
 arch/powerpc/platforms/pasemi/Makefile             |  1 -
 arch/powerpc/platforms/powermac/Makefile           |  2 --
 drivers/cpufreq/Kconfig.powerpc                    | 26 ++++++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |  0
 .../cpufreq/pmac32-cpufreq.c                       |  0
 .../cpufreq/pmac64-cpufreq.c                       |  0
 8 files changed, 29 insertions(+), 34 deletions(-)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Quoted 3 lines

Hi Deepthi,

Can you help testing this please?

Ping!!

author maintainer
#46 lore raw

Re: [PATCH 17/18] cpufreq: powerpc: move cpufreq driver to drivers/cpufreq

Quoted 25 lines · Viresh Kumar
Quoted 24 lines · Viresh Kumar
Quoted 22 lines · Viresh Kumar

This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Olof Johansson <[email protected]>

---
Compile Tested only.

 arch/powerpc/platforms/Kconfig                     | 31 ----------------------
 arch/powerpc/platforms/pasemi/Makefile             |  1 -
 arch/powerpc/platforms/powermac/Makefile           |  2 --
 drivers/cpufreq/Kconfig.powerpc                    | 26 ++++++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |  0
 .../cpufreq/pmac32-cpufreq.c                       |  0
 .../cpufreq/pmac64-cpufreq.c                       |  0
 8 files changed, 29 insertions(+), 34 deletions(-)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Quoted 5 lines
Quoted 3 lines

Hi Deepthi,

Can you help testing this please?

Ping!!

Ping!!

author maintainer
#47 lore raw

Re: [PATCH 17/18] cpufreq: powerpc: move cpufreq driver to drivers/cpufreq

Quoted 26 lines · Viresh Kumar
Quoted 25 lines · Viresh Kumar
Quoted 24 lines · Viresh Kumar
Quoted 22 lines · Viresh Kumar

This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Olof Johansson <[email protected]>

---
Compile Tested only.

 arch/powerpc/platforms/Kconfig                     | 31 ----------------------
 arch/powerpc/platforms/pasemi/Makefile             |  1 -
 arch/powerpc/platforms/powermac/Makefile           |  2 --
 drivers/cpufreq/Kconfig.powerpc                    | 26 ++++++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |  0
 .../cpufreq/pmac32-cpufreq.c                       |  0
 .../cpufreq/pmac64-cpufreq.c                       |  0
 8 files changed, 29 insertions(+), 34 deletions(-)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

Hi Deepthi,

Can you help testing this please?

Ping!!

Ping!!

Hi Benjamin,

Hope you are back from your vacations. Can you give it a try now?

author maintainer
#48 lore raw

Re: [PATCH 17/18] cpufreq: powerpc: move cpufreq driver to drivers/cpufreq

Quoted 31 lines · Viresh Kumar
Quoted 30 lines · Viresh Kumar
Quoted 29 lines · Viresh Kumar
Quoted 27 lines · Viresh Kumar
Quoted 10 lines · Viresh Kumar

This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Olof Johansson <[email protected]>

---
Compile Tested only.

Quoted 12 lines
 arch/powerpc/platforms/Kconfig                     | 31 ----------------------
 arch/powerpc/platforms/pasemi/Makefile             |  1 -
 arch/powerpc/platforms/powermac/Makefile           |  2 --
 drivers/cpufreq/Kconfig.powerpc                    | 26 ++++++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |  0
 .../cpufreq/pmac32-cpufreq.c                       |  0
 .../cpufreq/pmac64-cpufreq.c                       |  0
 8 files changed, 29 insertions(+), 34 deletions(-)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)

Hi Deepthi,

Can you help testing this please?

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Ping!!

Ping!!

Hi Benjamin,

Hope you are back from your vacations. Can you give it a try now?

Ping!!

author maintainer
#49 lore raw

Re: [PATCH 17/18] cpufreq: powerpc: move cpufreq driver to drivers/cpufreq

Quoted 34 lines · Viresh Kumar
Quoted 33 lines · Viresh Kumar
Quoted 32 lines · Viresh Kumar
Quoted 30 lines · Viresh Kumar
Quoted 24 lines · Viresh Kumar
Quoted 10 lines · Viresh Kumar

This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Olof Johansson <[email protected]>

---
Compile Tested only.

Quoted 12 lines
 arch/powerpc/platforms/Kconfig                     | 31 ----------------------
 arch/powerpc/platforms/pasemi/Makefile             |  1 -
 arch/powerpc/platforms/powermac/Makefile           |  2 --
 drivers/cpufreq/Kconfig.powerpc                    | 26 ++++++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |  0
 .../cpufreq/pmac32-cpufreq.c                       |  0
 .../cpufreq/pmac64-cpufreq.c                       |  0
 8 files changed, 29 insertions(+), 34 deletions(-)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Quoted 3 lines

Hi Deepthi,

Can you help testing this please?

Ping!!

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Ping!!

Hi Benjamin,

Hope you are back from your vacations. Can you give it a try now?

Ping!!

Ping!!

author maintainer
#50 lore raw

Re: [PATCH 17/18] cpufreq: powerpc: move cpufreq driver to drivers/cpufreq

Quoted 37 lines · Viresh Kumar
Quoted 36 lines · Viresh Kumar
Quoted 35 lines · Viresh Kumar
Quoted 33 lines · Viresh Kumar
Quoted 25 lines · Viresh Kumar
Quoted 24 lines · Viresh Kumar
Quoted 22 lines · Viresh Kumar

This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Olof Johansson <[email protected]>

---
Compile Tested only.

 arch/powerpc/platforms/Kconfig                     | 31 ----------------------
 arch/powerpc/platforms/pasemi/Makefile             |  1 -
 arch/powerpc/platforms/powermac/Makefile           |  2 --
 drivers/cpufreq/Kconfig.powerpc                    | 26 ++++++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |  0
 .../cpufreq/pmac32-cpufreq.c                       |  0
 .../cpufreq/pmac64-cpufreq.c                       |  0
 8 files changed, 29 insertions(+), 34 deletions(-)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Quoted 5 lines
Quoted 3 lines

Hi Deepthi,

Can you help testing this please?

Ping!!

Ping!!

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

Hi Benjamin,

Hope you are back from your vacations. Can you give it a try now?

Ping!!

Ping!!

Hi Rafael,

Its been more than 2 months now that this patch was first posted. And the response from Maintainers isn't so great, irrespective of how many times I pinged them.

This is what I think:
- It looked functionally correct to Benjamin but he wanted somebody to actually test it.
- Arnd gave his Ack (So it looked functionally correct to him too)
- We can probably push this into linux-next now and see if somebody complains of any breakage it has done. If not we can get it pushed for 3.11.

--
viresh

#51 lore raw

Re: [PATCH 17/18] cpufreq: powerpc: move cpufreq driver to drivers/cpufreq

Quoted 52 lines · Viresh Kumar
Quoted 37 lines · Viresh Kumar
Quoted 36 lines · Viresh Kumar
Quoted 35 lines · Viresh Kumar
Quoted 33 lines · Viresh Kumar
Quoted 25 lines · Viresh Kumar
Quoted 24 lines · Viresh Kumar
Quoted 22 lines · Viresh Kumar

This patch moves cpufreq driver of powerpc platform to drivers/cpufreq.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Olof Johansson <[email protected]>

---
Compile Tested only.

 arch/powerpc/platforms/Kconfig                     | 31 ----------------------
 arch/powerpc/platforms/pasemi/Makefile             |  1 -
 arch/powerpc/platforms/powermac/Makefile           |  2 --
 drivers/cpufreq/Kconfig.powerpc                    | 26 ++++++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |  0
 .../cpufreq/pmac32-cpufreq.c                       |  0
 .../cpufreq/pmac64-cpufreq.c                       |  0
 8 files changed, 29 insertions(+), 34 deletions(-)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Quoted 5 lines
Quoted 3 lines

Hi Deepthi,

Can you help testing this please?

Ping!!

Ping!!

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

Hi Benjamin,

Hope you are back from your vacations. Can you give it a try now?

Ping!!

Ping!!

Hi Rafael,

Its been more than 2 months now that this patch was first posted. And the response from Maintainers isn't so great, irrespective of how many times I pinged them.

Quoted 7 lines

This is what I think:
- It looked functionally correct to Benjamin but he wanted somebody to actually test it.
- Arnd gave his Ack (So it looked functionally correct to him too)
- We can probably push this into linux-next now and see if somebody complains of any breakage it has done. If not we can get it pushed for 3.11.

I agree, applied to bleeding-edge.

Thanks,
Rafael

Signature · 2 lines
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
author maintainer
#52 lore raw

PATCH 18/18 cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq

In reply to Viresh Kumar

This patch moves cpufreq driver of powerpc platforms/cell to drivers/cpufreq.

Cc Arnd Bergmann <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>

---
Compile Tested only.

 arch/powerpc/platforms/cell/Kconfig                | 26 +---------------------
 arch/powerpc/platforms/cell/Makefile               |  3 ---
 drivers/cpufreq/Kconfig.powerpc                    | 18 +++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq/ppc_cbe_cpufreq.c                      |  2 +-
 .../cpufreq/ppc_cbe_cpufreq_pervasive.c            |  3 +--
 .../cpufreq/ppc_cbe_cpufreq_pmi.c                  |  3 +--
 .../linux/ppc_cbe_cpufreq.h                        |  4 ++--
 8 files changed, 27 insertions(+), 35 deletions(-)
 rename arch/powerpc/platforms/cell/cbe_cpufreq.c => drivers/cpufreq/ppc_cbe_cpufreq.c (99%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c => drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c (98%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c => drivers/cpufreq/ppc_cbe_cpufreq_pmi.c (99%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq.h => include/linux/ppc_cbe_cpufreq.h (82%)
arch/powerpc/platforms/cell/Kconfig +1 -25
index 53aaefe..9978f59 100644
@@ -113,34 +113,10 @@ config CBE_THERM
 	default m
 	depends on CBE_RAS && SPU_BASE
 
-config CBE_CPUFREQ
-	tristate "CBE frequency scaling"
-	depends on CBE_RAS && CPU_FREQ
-	default m
-	help
-	  This adds the cpufreq driver for Cell BE processors.
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-	  If you don't have such processor, say N
-
-config CBE_CPUFREQ_PMI_ENABLE
-	bool "CBE frequency scaling using PMI interface"
-	depends on CBE_CPUFREQ
-	default n
-	help
-	  Select this, if you want to use the PMI interface
-	  to switch frequencies. Using PMI, the
-	  processor will not only be able to run at lower speed,
-	  but also at lower core voltage.
-
-config CBE_CPUFREQ_PMI
-	tristate
-	depends on CBE_CPUFREQ_PMI_ENABLE
-	default CBE_CPUFREQ
-
 config PPC_PMI
 	tristate
 	default y
-	depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON
+	depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON
 	help
 	  PMI (Platform Management Interrupt) is a way to
 	  communicate with the BMC (Baseboard Management Controller).
arch/powerpc/platforms/cell/Makefile +0 -3
index a4a8935..fe053e7 100644
@@ -5,9 +5,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE)		+= iommu.o setup.o spider-pic.o \
 obj-$(CONFIG_CBE_RAS)			+= ras.o
 
 obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
-obj-$(CONFIG_CBE_CPUFREQ_PMI)		+= cbe_cpufreq_pmi.o
-obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
-cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
 obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
 
 obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o
drivers/cpufreq/Kconfig.powerpc +18 -0
index 2e5a007..9e1ae94 100644
@@ -1,3 +1,21 @@
+config CPU_FREQ_CBE
+	tristate "CBE frequency scaling"
+	depends on CBE_RAS && PPC_CELL
+	default m
+	help
+	  This adds the cpufreq driver for Cell BE processors.
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+	  If you don't have such processor, say N
+
+config CPU_FREQ_CBE_PMI
+	bool "CBE frequency scaling using PMI interface"
+	depends on CPU_FREQ_CBE
+	default n
+	help
+	  Select this, if you want to use the PMI interface to switch
+	  frequencies. Using PMI, the processor will not only be able to run at
+	  lower speed, but also at lower core voltage.
+
 config CPU_FREQ_MAPLE
 	bool "Support for Maple 970FX Evaluation Board"
 	depends on PPC_MAPLE
drivers/cpufreq/Makefile +3 -0
index 7b16092f..bfefa22 100644
@@ -78,6 +78,9 @@ obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
+obj-$(CONFIG_CPU_FREQ_CBE)		+= ppc-cbe-cpufreq.o
+ppc-cbe-cpufreq-y			+= ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
+obj-$(CONFIG_CPU_FREQ_CBE_PMI)		+= ppc_cbe_cpufreq_pmi.o
 obj-$(CONFIG_CPU_FREQ_MAPLE)		+= maple-cpufreq.o
 obj-$(CONFIG_CPU_FREQ_PMAC)		+= pmac32-cpufreq.o
 obj-$(CONFIG_CPU_FREQ_PMAC64)		+= pmac64-cpufreq.o
drivers/cpufreq/ppc_cbe_cpufreq.c renamed from arch/powerpc/platforms/cell/cbe_cpufreq.c +1 -1
similarity index 99%
rename from arch/powerpc/platforms/cell/cbe_cpufreq.c
rename to drivers/cpufreq/ppc_cbe_cpufreq.c
index 718c6a3..6d7a51d 100644
@@ -23,11 +23,11 @@
 #include <linux/cpufreq.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
+#include <linux/ppc_cbe_cpufreq.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/cell-regs.h>
-#include "cbe_cpufreq.h"
 
 static DEFINE_MUTEX(cbe_switch_mutex);
 
drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c renamed from arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c +1 -2
similarity index 98%
rename from arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
rename to drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
index 20472e4..6708710 100644
@@ -25,13 +25,12 @@
 
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/ppc_cbe_cpufreq.h>
 #include <linux/time.h>
 #include <asm/machdep.h>
 #include <asm/hw_irq.h>
 #include <asm/cell-regs.h>
 
-#include "cbe_cpufreq.h"
-
 /* to write to MIC register */
 static u64 MIC_Slow_Fast_Timer_table[] = {
 	[0 ... 7] = 0x007fc00000000000ull,
drivers/cpufreq/ppc_cbe_cpufreq_pmi.c renamed from arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c +1 -2
similarity index 99%
rename from arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
rename to drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 60a07a4..448b888 100644
@@ -25,6 +25,7 @@
 #include <linux/timer.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
+#include <linux/ppc_cbe_cpufreq.h>
 
 #include <asm/processor.h>
 #include <asm/prom.h>
@@ -35,8 +36,6 @@
 #include <asm/time.h>
 #endif
 
-#include "cbe_cpufreq.h"
-
 static u8 pmi_slow_mode_limit[MAX_CBE];
 
 bool cbe_cpufreq_has_pmi = false;
include/linux/ppc_cbe_cpufreq.h renamed from arch/powerpc/platforms/cell/cbe_cpufreq.h +2 -2
similarity index 82%
rename from arch/powerpc/platforms/cell/cbe_cpufreq.h
rename to include/linux/ppc_cbe_cpufreq.h
index c1d86bf..b4c00a5 100644
@@ -1,5 +1,5 @@
 /*
- * cbe_cpufreq.h
+ * ppc_cbe_cpufreq.h
  *
  * This file contains the definitions used by the cbe_cpufreq driver.
  *
@@ -17,7 +17,7 @@ int cbe_cpufreq_get_pmode(int cpu);
 
 int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
 
-#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE)
+#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE)
 extern bool cbe_cpufreq_has_pmi;
 #else
 #define cbe_cpufreq_has_pmi (0)
Signature · 1 line
1.7.12.rc2.18.g61b472e
#53 lore raw

Re: [PATCH 18/18] cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq

Quoted 9 lines · Viresh Kumar

This patch moves cpufreq driver of powerpc platforms/cell to drivers/cpufreq.

Cc Arnd Bergmann <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>

---
Compile Tested only.

Quoted 8 lines
 arch/powerpc/platforms/cell/Kconfig                | 26 +---------------------
 arch/powerpc/platforms/cell/Makefile               |  3 ---
 drivers/cpufreq/Kconfig.powerpc                    | 18 +++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq/ppc_cbe_cpufreq.c                      |  2 +-
 .../cpufreq/ppc_cbe_cpufreq_pervasive.c            |  3 +--
 .../cpufreq/ppc_cbe_cpufreq_pmi.c                  |  3 +--
 .../linux/ppc_cbe_cpufreq.h                        |  4 ++--

Moving the files is good, but I don't see a reason to make the cbe_cpufreq.h header globally visible in include/linux/. Isn't it just used by as the interface between ppc_cbe_cpufreq_pmi.c and ppc_cbe_cpufreq.c?

Arnd

author maintainer
#54 lore raw

Re: [PATCH 18/18] cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq

Quoted 3 lines · Arnd Bergmann

Moving the files is good, but I don't see a reason to make the cbe_cpufreq.h header globally visible in include/linux/. Isn't it just used by as the interface between ppc_cbe_cpufreq_pmi.c and ppc_cbe_cpufreq.c?

When i moved it initially i thought it is also used by arch/powerpc/platforms/cell/cpufreq_spudemand.c and hence moved it to include/linux and never realized i am wrong..

Here is the fixup (And attached complete patch: original+fixup for Rafael to apply):

Compile tested only.

---
 drivers/cpufreq/ppc_cbe_cpufreq.c                    | 3 ++-
 {include/linux => drivers/cpufreq}/ppc_cbe_cpufreq.h | 0
 drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c          | 3 ++-
 drivers/cpufreq/ppc_cbe_cpufreq_pmi.c                | 3 ++-
 4 files changed, 6 insertions(+), 3 deletions(-)
 rename {include/linux => drivers/cpufreq}/ppc_cbe_cpufreq.h (100%)
(quoted diff) +0 -0

b/drivers/cpufreq/ppc_cbe_cpufreq.c
index 138d88c..56e0c17 100644

drivers/cpufreq/ppc_cbe_cpufreq.c +2 -1
@@ -23,12 +23,13 @@
 #include <linux/cpufreq.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
-#include <linux/ppc_cbe_cpufreq.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/cell-regs.h>
 
+#include "ppc_cbe_cpufreq.h"
+
 static DEFINE_MUTEX(cbe_switch_mutex);
 
 
drivers/cpufreq/ppc_cbe_cpufreq.h renamed from include/linux/ppc_cbe_cpufreq.h +0 -0
similarity index 100%
rename from include/linux/ppc_cbe_cpufreq.h
rename to drivers/cpufreq/ppc_cbe_cpufreq.h
(quoted diff) +0 -0

b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
index 6708710..84d2f2c 100644

drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c +2 -1
@@ -25,12 +25,13 @@
 
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/ppc_cbe_cpufreq.h>
 #include <linux/time.h>
 #include <asm/machdep.h>
 #include <asm/hw_irq.h>
 #include <asm/cell-regs.h>
 
+#include "ppc_cbe_cpufreq.h"
+
 /* to write to MIC register */
 static u64 MIC_Slow_Fast_Timer_table[] = {
 	[0 ... 7] = 0x007fc00000000000ull,
(quoted diff) +0 -0

b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 448b888..d29e8da 100644

drivers/cpufreq/ppc_cbe_cpufreq_pmi.c +2 -1
@@ -25,7 +25,6 @@
 #include <linux/timer.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
-#include <linux/ppc_cbe_cpufreq.h>
 
 #include <asm/processor.h>
 #include <asm/prom.h>
@@ -36,6 +35,8 @@
 #include <asm/time.h>
 #endif
 
+#include "ppc_cbe_cpufreq.h"
+
 static u8 pmi_slow_mode_limit[MAX_CBE];
 
 bool cbe_cpufreq_has_pmi = false;

From 47275a6b874359f1b42fbea3e9d10372049ee6c6 Mon Sep 17 00:00:00 2001
Message-Id: <47275a6b874359f1b42fbea3e9d10372049ee6c6.1365083336.git.viresh.kumar@linaro.org>
From: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 11:20:23 +0530
Subject: [PATCH] cpufreq: powerpc/platforms/cell: move cpufreq driver to
drivers/cpufreq

This patch moves cpufreq driver of powerpc platforms/cell to drivers/cpufreq.

Cc Arnd Bergmann <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>
---
 arch/powerpc/platforms/cell/Kconfig                | 26 +---------------------
 arch/powerpc/platforms/cell/Makefile               |  3 ---
 drivers/cpufreq/Kconfig.powerpc                    | 18 +++++++++++++++
 drivers/cpufreq/Makefile                           |  3 +++
 .../cpufreq/ppc_cbe_cpufreq.c                      |  3 ++-
 .../cpufreq/ppc_cbe_cpufreq.h                      |  4 ++--
 .../cpufreq/ppc_cbe_cpufreq_pervasive.c            |  2 +-
 .../cpufreq/ppc_cbe_cpufreq_pmi.c                  |  2 +-
 8 files changed, 28 insertions(+), 33 deletions(-)
 rename arch/powerpc/platforms/cell/cbe_cpufreq.c => drivers/cpufreq/ppc_cbe_cpufreq.c (99%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq.h => drivers/cpufreq/ppc_cbe_cpufreq.h (82%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c => drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c (99%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c => drivers/cpufreq/ppc_cbe_cpufreq_pmi.c (99%)
arch/powerpc/platforms/cell/Kconfig +1 -25
index 53aaefe..9978f59 100644
@@ -113,34 +113,10 @@ config CBE_THERM
 	default m
 	depends on CBE_RAS && SPU_BASE
 
-config CBE_CPUFREQ
-	tristate "CBE frequency scaling"
-	depends on CBE_RAS && CPU_FREQ
-	default m
-	help
-	  This adds the cpufreq driver for Cell BE processors.
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-	  If you don't have such processor, say N
-
-config CBE_CPUFREQ_PMI_ENABLE
-	bool "CBE frequency scaling using PMI interface"
-	depends on CBE_CPUFREQ
-	default n
-	help
-	  Select this, if you want to use the PMI interface
-	  to switch frequencies. Using PMI, the
-	  processor will not only be able to run at lower speed,
-	  but also at lower core voltage.
-
-config CBE_CPUFREQ_PMI
-	tristate
-	depends on CBE_CPUFREQ_PMI_ENABLE
-	default CBE_CPUFREQ
-
 config PPC_PMI
 	tristate
 	default y
-	depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON
+	depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON
 	help
 	  PMI (Platform Management Interrupt) is a way to
 	  communicate with the BMC (Baseboard Management Controller).
arch/powerpc/platforms/cell/Makefile +0 -3
index a4a8935..fe053e7 100644
@@ -5,9 +5,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE)		+= iommu.o setup.o spider-pic.o \
 obj-$(CONFIG_CBE_RAS)			+= ras.o
 
 obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
-obj-$(CONFIG_CBE_CPUFREQ_PMI)		+= cbe_cpufreq_pmi.o
-obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
-cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
 obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
 
 obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o
drivers/cpufreq/Kconfig.powerpc +18 -0
index 2e5a007..9e1ae94 100644
@@ -1,3 +1,21 @@
+config CPU_FREQ_CBE
+	tristate "CBE frequency scaling"
+	depends on CBE_RAS && PPC_CELL
+	default m
+	help
+	  This adds the cpufreq driver for Cell BE processors.
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+	  If you don't have such processor, say N
+
+config CPU_FREQ_CBE_PMI
+	bool "CBE frequency scaling using PMI interface"
+	depends on CPU_FREQ_CBE
+	default n
+	help
+	  Select this, if you want to use the PMI interface to switch
+	  frequencies. Using PMI, the processor will not only be able to run at
+	  lower speed, but also at lower core voltage.
+
 config CPU_FREQ_MAPLE
 	bool "Support for Maple 970FX Evaluation Board"
 	depends on PPC_MAPLE
drivers/cpufreq/Makefile +3 -0
index 7b16092f..bfefa22 100644
@@ -78,6 +78,9 @@ obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
+obj-$(CONFIG_CPU_FREQ_CBE)		+= ppc-cbe-cpufreq.o
+ppc-cbe-cpufreq-y			+= ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
+obj-$(CONFIG_CPU_FREQ_CBE_PMI)		+= ppc_cbe_cpufreq_pmi.o
 obj-$(CONFIG_CPU_FREQ_MAPLE)		+= maple-cpufreq.o
 obj-$(CONFIG_CPU_FREQ_PMAC)		+= pmac32-cpufreq.o
 obj-$(CONFIG_CPU_FREQ_PMAC64)		+= pmac64-cpufreq.o
drivers/cpufreq/ppc_cbe_cpufreq.c renamed from arch/powerpc/platforms/cell/cbe_cpufreq.c +2 -1
similarity index 99%
rename from arch/powerpc/platforms/cell/cbe_cpufreq.c
rename to drivers/cpufreq/ppc_cbe_cpufreq.c
index 718c6a3..e577a1d 100644
@@ -27,7 +27,8 @@
 #include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/cell-regs.h>
-#include "cbe_cpufreq.h"
+
+#include "ppc_cbe_cpufreq.h"
 
 static DEFINE_MUTEX(cbe_switch_mutex);
 
drivers/cpufreq/ppc_cbe_cpufreq.h renamed from arch/powerpc/platforms/cell/cbe_cpufreq.h +2 -2
similarity index 82%
rename from arch/powerpc/platforms/cell/cbe_cpufreq.h
rename to drivers/cpufreq/ppc_cbe_cpufreq.h
index c1d86bf..b4c00a5 100644
@@ -1,5 +1,5 @@
 /*
- * cbe_cpufreq.h
+ * ppc_cbe_cpufreq.h
  *
  * This file contains the definitions used by the cbe_cpufreq driver.
  *
@@ -17,7 +17,7 @@ int cbe_cpufreq_get_pmode(int cpu);
 
 int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
 
-#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE)
+#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE)
 extern bool cbe_cpufreq_has_pmi;
 #else
 #define cbe_cpufreq_has_pmi (0)
drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c renamed from arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c +1 -1
similarity index 99%
rename from arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
rename to drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
index 20472e4..84d2f2c 100644
@@ -30,7 +30,7 @@
 #include <asm/hw_irq.h>
 #include <asm/cell-regs.h>
 
-#include "cbe_cpufreq.h"
+#include "ppc_cbe_cpufreq.h"
 
 /* to write to MIC register */
 static u64 MIC_Slow_Fast_Timer_table[] = {
drivers/cpufreq/ppc_cbe_cpufreq_pmi.c renamed from arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c +1 -1
similarity index 99%
rename from arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
rename to drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 60a07a4..d29e8da 100644
@@ -35,7 +35,7 @@
 #include <asm/time.h>
 #endif
 
-#include "cbe_cpufreq.h"
+#include "ppc_cbe_cpufreq.h"
 
 static u8 pmi_slow_mode_limit[MAX_CBE];
 
Signature · 1 line
1.7.12.rc2.18.g61b472e
Acked-by
#55 lore raw

Re: [PATCH 18/18] cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq

Quoted 6 lines · Viresh Kumar
Quoted 3 lines · Arnd Bergmann

Moving the files is good, but I don't see a reason to make the cbe_cpufreq.h header globally visible in include/linux/. Isn't it just used by as the interface between ppc_cbe_cpufreq_pmi.c and ppc_cbe_cpufreq.c?

Quoted 6 lines

When i moved it initially i thought it is also used by arch/powerpc/platforms/cell/cpufreq_spudemand.c and hence moved it to include/linux and never realized i am wrong..

Here is the fixup (And attached complete patch: original+fixup for Rafael to apply):

#56 lore raw
In reply to Viresh Kumar
Quoted 7 lines · Viresh Kumar

Hi Rafael,

These are all the remaining patches i have for 3.10. All of them have received Acks from their maintainers leaving powerpc ones. I have got an additional patch for powerpc (18) this time, it was the only driver left out of drivers/cpufreq.

Please consider them for applying to your bleeding-edge or linux-next.

Patches [1-16/18] plus the fixed-up [18/18] (slightly modified due to the ordering change) applied to bleeding-edge. For [17/18] I need an ACK from the powerpc side.

Thanks,
Rafael

Quoted 155 lines

-------------x--------------x-------------

This patchset targets towards moving all platform specific cpufreq drivers to drivers/cpufreq. This will lead to better consolidation code in future too.

All ARM and powerpc patches are compile tested by me.

Changes since earlier version:
- Additional patch 18/18

Viresh Kumar (18):
cpufreq: ARM: Arrange drivers in alphabetical order
cpufreq: tegra: Move driver to drivers/cpufreq
cpufreq: davinci: move cpufreq driver to drivers/cpufreq
cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq
cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreq
cpufreq: integrator: move cpufreq driver to drivers/cpufreq
cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq
cpufreq: AVR32: move cpufreq driver to drivers/cpufreq
cpufreq: blackfin: move cpufreq driver to drivers/cpufreq
cpufreq: cris: move cpufreq driver to drivers/cpufreq
cpufreq: ia64: move cpufreq driver to drivers/cpufreq
cpufreq: mips: move cpufreq driver to drivers/cpufreq
cpufreq: sh: move cpufreq driver to drivers/cpufreq
cpufreq: unicore2: move cpufreq driver to drivers/cpufreq
cpufreq: sparc: move cpufreq driver to drivers/cpufreq
cpufreq: powerpc: move cpufreq driver to drivers/cpufreq
cpufreq: powerpc/platforms/cell: move cpufreq driver to
drivers/cpufreq

 arch/arm/Kconfig                                   |  72 --------
 arch/arm/mach-davinci/Makefile                     |   1 -
 arch/arm/mach-integrator/Makefile                  |   1 -
 arch/arm/mach-pxa/Makefile                         |   6 -
 arch/arm/mach-pxa/include/mach/generic.h           |   1 +
 arch/arm/mach-s3c24xx/Kconfig                      |  66 +++-----
 arch/arm/mach-s3c24xx/Makefile                     |   6 -
 arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |   0
 arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |   2 +-
 arch/arm/mach-sa1100/Kconfig                       |  26 +--
 arch/arm/mach-sa1100/Makefile                      |   3 -
 arch/arm/mach-sa1100/include/mach/generic.h        |   1 +
 arch/arm/mach-tegra/Makefile                       |   1 -
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h |  10 +-
 arch/arm/plat-samsung/include/plat/cpu-freq.h      |   6 +-
 arch/avr32/Kconfig                                 |  13 --
 arch/avr32/configs/atngw100_defconfig              |   2 +-
 arch/avr32/configs/atngw100_evklcd100_defconfig    |   2 +-
 arch/avr32/configs/atngw100_evklcd101_defconfig    |   2 +-
 arch/avr32/configs/atngw100_mrmt_defconfig         |   2 +-
 arch/avr32/configs/atngw100mkii_defconfig          |   2 +-
 .../avr32/configs/atngw100mkii_evklcd100_defconfig |   2 +-
 .../avr32/configs/atngw100mkii_evklcd101_defconfig |   2 +-
 arch/avr32/configs/atstk1002_defconfig             |   2 +-
 arch/avr32/configs/atstk1003_defconfig             |   2 +-
 arch/avr32/configs/atstk1004_defconfig             |   2 +-
 arch/avr32/configs/atstk1006_defconfig             |   2 +-
 arch/avr32/configs/favr-32_defconfig               |   2 +-
 arch/avr32/configs/hammerhead_defconfig            |   2 +-
 arch/avr32/configs/mimc200_defconfig               |   2 +-
 arch/avr32/mach-at32ap/Makefile                    |   1 -
 arch/blackfin/mach-common/Makefile                 |   1 -
 arch/cris/arch-v32/mach-a3/Makefile                |   1 -
 arch/cris/arch-v32/mach-fs/Makefile                |   1 -
 arch/ia64/Kconfig                                  |   6 +-
 arch/ia64/kernel/Makefile                          |   1 -
 arch/ia64/kernel/cpufreq/Kconfig                   |  29 ----
 arch/ia64/kernel/cpufreq/Makefile                  |   2 -
 arch/mips/Kconfig                                  |   9 +-
 arch/mips/kernel/Makefile                          |   2 -
 arch/mips/kernel/cpufreq/Kconfig                   |  41 -----
 arch/mips/kernel/cpufreq/Makefile                  |   5 -
 arch/powerpc/platforms/Kconfig                     |  31 ----
 arch/powerpc/platforms/cell/Kconfig                |  26 +--
 arch/powerpc/platforms/cell/Makefile               |   3 -
 arch/powerpc/platforms/pasemi/Makefile             |   1 -
 arch/powerpc/platforms/powermac/Makefile           |   2 -
 arch/sh/Kconfig                                    |  18 --
 arch/sh/kernel/Makefile                            |   1 -
 arch/sparc/Kconfig                                 |  23 ---
 arch/sparc/kernel/Makefile                         |   3 -
 arch/unicore32/kernel/Makefile                     |   1 -
 drivers/cpufreq/Kconfig                            |  89 ++++++++++
 drivers/cpufreq/Kconfig.arm                        | 184 ++++++++++++++-------
 drivers/cpufreq/Kconfig.powerpc                    |  44 +++++
 drivers/cpufreq/Makefile                           |  42 ++++-
 .../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c  |   0
 .../cpufreq/blackfin-cpufreq.c                     |   0
 .../cpufreq/cris-artpec3-cpufreq.c                 |   0
 .../cpufreq/cris-etraxfs-cpufreq.c                 |   0
 .../cpufreq.c => drivers/cpufreq/davinci-cpufreq.c |   2 -
 .../cpufreq/ia64-acpi-cpufreq.c                    |   1 -
 .../cpu.c => drivers/cpufreq/integrator-cpufreq.c  |   2 -
 .../kernel => drivers}/cpufreq/loongson2_cpufreq.c |   0
 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c  |   0
 .../cpufreq/pmac32-cpufreq.c                       |   0
 .../cpufreq/pmac64-cpufreq.c                       |   0
 .../cpufreq/ppc_cbe_cpufreq.c                      |   2 +-
 .../cpufreq/ppc_cbe_cpufreq_pervasive.c            |   3 +-
 .../cpufreq/ppc_cbe_cpufreq_pmi.c                  |   3 +-
 .../cpufreq/pxa2xx-cpufreq.c                       |   2 -
 .../cpufreq/pxa3xx-cpufreq.c                       |   5 +-
 .../cpufreq/s3c2410-cpufreq.c                      |   0
 .../cpufreq/s3c2412-cpufreq.c                      |   3 +-
 .../cpufreq/s3c2440-cpufreq.c                      |   0
 .../cpufreq/s3c24xx-cpufreq-debugfs.c              |   0
 .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |   0
 .../cpufreq/sa1100-cpufreq.c                       |   3 +-
 .../cpufreq/sa1110-cpufreq.c                       |   3 +-
 .../cpufreq.c => drivers/cpufreq/sh-cpufreq.c      |   2 -
 .../cpufreq/sparc-us2e-cpufreq.c                   |   0
 .../cpufreq/sparc-us3-cpufreq.c                    |   0
 .../cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c |   2 -
 .../cpufreq/unicore2-cpufreq.c                     |   2 +-
 .../linux/ppc_cbe_cpufreq.h                        |   4 +-
 85 files changed, 385 insertions(+), 464 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
 rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
 create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h
 delete mode 100644 arch/ia64/kernel/cpufreq/Kconfig
 delete mode 100644 arch/ia64/kernel/cpufreq/Makefile
 delete mode 100644 arch/mips/kernel/cpufreq/Kconfig
 delete mode 100644 arch/mips/kernel/cpufreq/Makefile
 rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)
 rename arch/blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c (100%)
 rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%)
 rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%)
 rename arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c (99%)
 rename arch/ia64/kernel/cpufreq/acpi-cpufreq.c => drivers/cpufreq/ia64-acpi-cpufreq.c (99%)
 rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)
 rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)
 rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
 rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq.c => drivers/cpufreq/ppc_cbe_cpufreq.c (99%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c => drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c (98%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c => drivers/cpufreq/ppc_cbe_cpufreq_pmi.c (99%)
 rename arch/arm/mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c (99%)
 rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
 rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%)
 rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%)
 rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
 rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%)
 rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/sparc-us3-cpufreq.c (100%)
 rename arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c (99%)
 rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%)
 rename arch/powerpc/platforms/cell/cbe_cpufreq.h => include/linux/ppc_cbe_cpufreq.h (82%)
Signature · 2 lines
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
author maintainer
#57 lore raw
Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Viresh Kumar

Hi Rafael,

These are all the remaining patches i have for 3.10. All of them have received Acks from their maintainers leaving powerpc ones. I have got an additional patch for powerpc (18) this time, it was the only driver left out of drivers/cpufreq.

Quoted 5 lines
Quoted 1 line

Please consider them for applying to your bleeding-edge or linux-next.

Patches [1-16/18] plus the fixed-up [18/18] (slightly modified due to the ordering change) applied to bleeding-edge. For [17/18] I need an ACK from the powerpc side.

Thanks.