mx28evk: add NAND commands
PATCH 1/1 mx28evk: add NAND commands
the mx28evk has a socket which can contains a TSOP48 NAND flash. So enable the nand command and it's trimffs option.
Tested on MX28EVK with NAND :
NAND: 128 MiB
MX28EVK U-Boot > nand info
Device 0: nand0, sector size 16 KiB
Page size 2048 b
OOB size 64 b
Erase size 16384 b
and without NAND :
NAND: No NAND device found!!!
0 MiB
MX28EVK U-Boot > nand info
MX28EVK U-Boot >
--- include/configs/mx28evk.h | 2 ++ 1 file changed, 2 insertions(+)
include/configs/mx28evk.h +2 -0
@@ -69,6 +69,8 @@#define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_I2C +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS /* * Memory configurations
Signature · 1 line
1.7.11.7
PATCH 1/1 mx28evk: add NAND commands
Hi Eric,
include/configs/mx28evk.h line 72
Quoted 9 lines · Eric B?nard
include/configs/mx28evk.h +1
-0@@ -69,6 +69,8 @@#define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_I2C +#define CONFIG_CMD_NAND
Please check include/configs/mx28evk_nand.h in u-boot.imx. It has this define already.
include/configs/mx28evk.h line 73
Quoted 1 line
include/configs/mx28evk.h +1
-0+#define CONFIG_CMD_NAND_TRIMFFS
Then you could add this command there, if you like.
Regards,
Fabio Estevam
PATCH 1/1 mx28evk: add NAND commands
Hi Fabio,
Le Mon, 8 Apr 2013 10:24:45 -0300,
Fabio Estevam <[email protected]> a ?crit :
Quoted 15 lines · Eric B?nard
include/configs/mx28evk.h line 72
Quoted 10 lines
include/configs/mx28evk.h +1
-0@@ -69,6 +69,8 @@#define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_I2C +#define CONFIG_CMD_NAND Please check
include/configs/mx28evk_nand.hin u-boot.imx. It has this define already.
OK I was on master :-(
Eric
PATCH 1/1 mx28evk: add NAND commands
In reply to Fabio EstevamQuoted 17 lines · Fabio Estevam
Hi Eric,
include/configs/mx28evk.h line 72
Quoted 9 lines · Eric B??nard
include/configs/mx28evk.h +1
-0@@ -69,6 +69,8 @@#define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_I2C +#define CONFIG_CMD_NAND Please check
include/configs/mx28evk_nand.hin u-boot.imx. It has this define already.
Quoted 3 lines
include/configs/mx28evk.h line 73
Quoted 1 line
include/configs/mx28evk.h +1
-0+#define CONFIG_CMD_NAND_TRIMFFS Then you could add this command there, if you like.
And check for UBI related things being on too.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130408/0f1a050f/attachment.pgp>
PATCH 1/1 mx28evk: add NAND commands
Hi Tom,
Le Mon, 8 Apr 2013 09:27:29 -0400,
Tom Rini <[email protected]> a ?crit :
Quoted 18 lines · Fabio Estevam
Quoted 17 lines
Hi Eric,
include/configs/mx28evk.h line 72
Quoted 9 lines · Eric B??nard
include/configs/mx28evk.h +1
-0@@ -69,6 +69,8 @@#define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_I2C +#define CONFIG_CMD_NAND Please check
include/configs/mx28evk_nand.hin u-boot.imx. It has this define already.
Quoted 6 lines
Quoted 3 lines
include/configs/mx28evk.h line 73
Quoted 1 line
include/configs/mx28evk.h +1
-0+#define CONFIG_CMD_NAND_TRIMFFS Then you could add this command there, if you like.
And check for UBI related things being on too.
that's what I'm actually testing ;-)
Eric