ARM: shmobile: marzen-reference: use irqpin for lan
Subsystems (2)
PATCH 1/1 ARM: shmobile: marzen-reference: use irqpin for lan
This corrects the configuration of the SMSC lan controller to use the newly added irqpin as its IRQ source.
Previously the lan controller did not work. Now it does.
---
This depends on "[PATCH/RFC 0/2] ARM: shmobile: DT irqpin for r8a7779 and marzen-reference".
--- arch/arm/boot/dts/r8a7779-marzen-reference.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/r8a7779-marzen-reference.dts +2 -2
@@ -38,8 +38,8 @@ compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x18000000 0x100>; phy-mode = "mii"; - interrupt-parent = <&gic>; - interrupts = <0 28 0x4>; + interrupt-parent = <&irqpin0>; + interrupts = <1 0>; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>;
Signature · 1 line
1.7.10.4
Simon Horman
AppliedPATCH 1/1 ARM: shmobile: marzen-reference: use irqpin for lan
Quoted 7 lines · Simon Horman
This corrects the configuration of the SMSC lan controller to use the newly added irqpin as its IRQ source.
Previously the lan controller did not work. Now it does.
Cc Guennadi Liakhovetski <[email protected]>Signed-off-by Simon Horman <[email protected]>
Queued up in the boards-marzen branch.
PATCH 1/1 ARM: shmobile: marzen-reference: use irqpin for lan
Quoted 10 lines · Simon Horman
Quoted 7 lines · Simon Horman
This corrects the configuration of the SMSC lan controller to use the newly added irqpin as its IRQ source.
Previously the lan controller did not work. Now it does.
Cc Guennadi Liakhovetski <[email protected]>Signed-off-by Simon Horman <[email protected]>Queued up in the boards-marzen branch.
Dropped as the pre-requisite irqpin dt code isn't queued-up yet.