Skip to contentSkip to conversation

update earlyprintk documentation (and kill x86 copy)

PATCH New Dave Hansen 2 participants 2 messages Apr 10, 2013 – Apr 11, 2013 Documentation

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 update earlyprintk documentation (and kill x86 copy)

Documentation/kernel-parameters.txt and Documentation/x86/x86_64/boot-options.txt contain virtually identical text describing earlyprintk.

This consolidates the two copies and updates the documentation a bit. No one ever documented the:

	earlyprintk=serial,0x1008,115200

syntax, nor mentioned that ARM is now a supported earlyprintk arch.

---

 linux.git-davehans/Documentation/kernel-parameters.txt       |   16 +++++++++--
 linux.git-davehans/Documentation/x86/x86_64/boot-options.txt |   14 ---------
 2 files changed, 14 insertions(+), 16 deletions(-)
Documentation/kernel-parameters.txt renamed from Documentation/kernel-parameters.txt~early-printk-morettys +14 -2
diff -puN Documentation/kernel-parameters.txt~early-printk-morettys Documentation/kernel-parameters.txt
@@ -757,19 +757,31 @@ bytes respectively. Such letter suffixes
 			(mmio) or 32-bit (mmio32).
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86,SH,BLACKFIN]
+	earlyprintk=	[X86,SH,BLACKFIN,ARM]
 			earlyprintk=vga
 			earlyprintk=xen
 			earlyprintk=serial[,ttySn[,baudrate]]
+			earlyprintk=serial[,0x...[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
 
+			earlyprintk is useful when the kernel crashes before
+			the normal console is initialized. It is not enabled by
+			default because it has some cosmetic problems.
+
 			Append ",keep" to not disable it when the real console
 			takes over.
 
 			Only vga or serial or usb debug port at a time.
 
-			Currently only ttyS0 and ttyS1 are supported.
+			Currently only ttyS0 and ttyS1 may be specified by
+			name.  Other I/O ports may be explicitly specified
+			on some architectures (x86 and arm at least) by
+			replacing ttySn with an I/O port address, like this:
+				earlyprintk=serial,0x1008,115200
+			You can find the port for a given device in
+			/proc/tty/driver/serial:
+				2: uart:ST16650V2 port:00001008 irq:18 ...
 
 			Interaction with the standard serial driver is not
 			very good.
Documentation/x86/x86_64/boot-options.txt renamed from Documentation/x86/x86_64/boot-options.txt~early-printk-morettys +0 -14
diff -puN Documentation/x86/x86_64/boot-options.txt~early-printk-morettys Documentation/x86/x86_64/boot-options.txt
@@ -91,20 +91,6 @@ APICs
 		 apicmaintimer. Useful when your PIT timer is totally
 		 broken.
 
-Early Console
-
-   syntax: earlyprintk=vga
-           earlyprintk=serial[,ttySn[,baudrate]]
-
-   The early console is useful when the kernel crashes before the
-   normal console is initialized. It is not enabled by
-   default because it has some cosmetic problems.
-   Append ,keep to not disable it when the real console takes over.
-   Only vga or serial at a time, not both.
-   Currently only ttyS0 and ttyS1 are supported.
-   Interaction with the standard serial driver is not very good.
-   The VGA output is eventually overwritten by the real console.
-
 Timing
 
   notsc

_

#1 lore raw

[tip:x86/debug] x86, early-printk: Update earlyprintk documentation (and kill x86 copy)

x86, early-printk: Update earlyprintk documentation (and kill x86 copy)
Commit-ID:  147ea09119e45caf2e8bf57c9e54cc930ccfeda9
Gitweb:     http://git.kernel.org/tip/147ea09119e45caf2e8bf57c9e54cc930ccfeda9
Author:     Dave Hansen <[email protected]>
AuthorDate: Wed, 10 Apr 2013 14:03:38 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Thu, 11 Apr 2013 10:30:40 +0200

x86, early-printk: Update earlyprintk documentation (and kill x86 copy)

Documentation/kernel-parameters.txt and Documentation/x86/x86_64/boot-options.txt contain virtually identical text describing earlyprintk.

This consolidates the two copies and updates the documentation a bit. No one ever documented the:

	earlyprintk=serial,0x1008,115200

syntax, nor mentioned that ARM is now a supported earlyprintk arch.

---
 Documentation/kernel-parameters.txt       | 16 ++++++++++++++--
 Documentation/x86/x86_64/boot-options.txt | 14 --------------
 2 files changed, 14 insertions(+), 16 deletions(-)
Documentation/kernel-parameters.txt +14 -2
index 4609e81..b5cfd04 100644
@@ -757,19 +757,31 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			(mmio) or 32-bit (mmio32).
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86,SH,BLACKFIN]
+	earlyprintk=	[X86,SH,BLACKFIN,ARM]
 			earlyprintk=vga
 			earlyprintk=xen
 			earlyprintk=serial[,ttySn[,baudrate]]
+			earlyprintk=serial[,0x...[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
 
+			earlyprintk is useful when the kernel crashes before
+			the normal console is initialized. It is not enabled by
+			default because it has some cosmetic problems.
+
 			Append ",keep" to not disable it when the real console
 			takes over.
 
 			Only vga or serial or usb debug port at a time.
 
-			Currently only ttyS0 and ttyS1 are supported.
+			Currently only ttyS0 and ttyS1 may be specified by
+			name.  Other I/O ports may be explicitly specified
+			on some architectures (x86 and arm at least) by
+			replacing ttySn with an I/O port address, like this:
+				earlyprintk=serial,0x1008,115200
+			You can find the port for a given device in
+			/proc/tty/driver/serial:
+				2: uart:ST16650V2 port:00001008 irq:18 ...
 
 			Interaction with the standard serial driver is not
 			very good.
Documentation/x86/x86_64/boot-options.txt +0 -14
index e015a83..e9e8ddb 100644
@@ -91,20 +91,6 @@ APICs
 		 apicmaintimer. Useful when your PIT timer is totally
 		 broken.
 
-Early Console
-
-   syntax: earlyprintk=vga
-           earlyprintk=serial[,ttySn[,baudrate]]
-
-   The early console is useful when the kernel crashes before the
-   normal console is initialized. It is not enabled by
-   default because it has some cosmetic problems.
-   Append ,keep to not disable it when the real console takes over.
-   Only vga or serial at a time, not both.
-   Currently only ttyS0 and ttyS1 are supported.
-   Interaction with the standard serial driver is not very good.
-   The VGA output is eventually overwritten by the real console.
-
 Timing
 
   notsc