Skip to contentSkip to conversation

pinctrl: Add pinctrl-s3c24xx driver

PATCH Superseded Heiko Stübner 2 participants 5 messages Apr 10, 2013 – Apr 11, 2013

Subsystems (4)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 pinctrl: Add pinctrl-s3c24xx driver

The s3c24xx pins follow a similar pattern as the other Samsung SoCs and can therefore reuse the already introduced infrastructure.

The s3c24xx SoCs have one design oddity in that the first 4 external interrupts do not reside in the eint pending register but in the main interrupt controller instead. We solve this by forwarding the external interrupt from the main controller into the irq domain of the pin bank. The masking/acking of these interrupts is handled in the same way.

Furthermore the S3C2412/2413 SoCs contain another oddity in that they keep the same 4 eints in the main interrupt controller and eintpend register and requiring ack operations to happen in both. To solve this a ctrl_type enum is introduced which can keep the type of controller in the samsung_pin_ctrl struct for later retrieval.

The ctrl_type enum contains only S3C24XX and S3C2412 types, as the eint-speciality is currently the only use-case. But it can be expaned if other SoCs gain special handling requirements later on.

---
changes since v1:
- address comments from Tomasz Figa:
* split handling functions for eints 0-3 for s3c2412 and all others
* change the handling for s3c2412 eints 0-3 in that they now use chained_irq_* for the outer parent interrupt

 .../bindings/pinctrl/samsung-pinctrl.txt           |    8 +
 drivers/gpio/gpio-samsung.c                        |    4 +
 drivers/pinctrl/Kconfig                            |    5 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-s3c24xx.c                  |  664 ++++++++++++++++++++
 drivers/pinctrl/pinctrl-samsung.c                  |   10 +
 drivers/pinctrl/pinctrl-samsung.h                  |   16 +
 7 files changed, 708 insertions(+), 0 deletions(-)
 create mode 100644 drivers/pinctrl/pinctrl-s3c24xx.c
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +8 -0
index c70fca1..e4443e3 100644
@@ -7,6 +7,10 @@ on-chip controllers onto these pads.
 
 Required Properties:
 - compatible: should be one of the following.
+  - "samsung,s3c2413-pinctrl": for S3C64xx-compatible pin-controller,
+  - "samsung,s3c2416-pinctrl": for S3C64xx-compatible pin-controller,
+  - "samsung,s3c2440-pinctrl": for S3C64xx-compatible pin-controller,
+  - "samsung,s3c2450-pinctrl": for S3C64xx-compatible pin-controller,
   - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
   - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
   - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
@@ -106,6 +110,10 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
 
    - compatible: identifies the type of the external wakeup interrupt controller
      The possible values are:
+     - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
+     - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung S3C2412 and S3C2413 SoCs,
      - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
        found on Samsung S3C64xx SoCs,
      - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
drivers/gpio/gpio-samsung.c +4 -0
index dc06a6f..73017b9 100644
@@ -3026,6 +3026,10 @@ static __init int samsung_gpiolib_init(void)
 	*/
 	struct device_node *pctrl_np;
 	static const struct of_device_id exynos_pinctrl_ids[] = {
+		{ .compatible = "samsung,s3c2413-pinctrl", },
+		{ .compatible = "samsung,s3c2416-pinctrl", },
+		{ .compatible = "samsung,s3c2440-pinctrl", },
+		{ .compatible = "samsung,s3c2450-pinctrl", },
 		{ .compatible = "samsung,s3c64xx-pinctrl", },
 		{ .compatible = "samsung,exynos4210-pinctrl", },
 		{ .compatible = "samsung,exynos4x12-pinctrl", },
drivers/pinctrl/Kconfig +5 -0
index 7402ac9..58d73ac 100644
@@ -226,6 +226,11 @@ config PINCTRL_EXYNOS5440
 	select PINMUX
 	select PINCONF
 
+config PINCTRL_S3C24XX
+	bool "Samsung S3C24XX SoC pinctrl driver"
+	depends on ARCH_S3C24XX
+	select PINCTRL_SAMSUNG
+
 config PINCTRL_S3C64XX
 	bool "Samsung S3C64XX SoC pinctrl driver"
 	depends on ARCH_S3C64XX
drivers/pinctrl/Makefile +1 -0
index 21d34c2..1ccdfd8 100644
@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
 obj-$(CONFIG_PINCTRL_EXYNOS)	+= pinctrl-exynos.o
 obj-$(CONFIG_PINCTRL_EXYNOS5440)	+= pinctrl-exynos5440.o
+obj-$(CONFIG_PINCTRL_S3C24XX)	+= pinctrl-s3c24xx.o
 obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
drivers/pinctrl/pinctrl-s3c24xx.c new file +664 -0

664 lines not on this page · raw message

drivers/pinctrl/pinctrl-samsung.c +10 -0
index e836135..234c32f 100644
@@ -977,6 +977,16 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 	{ .compatible = "samsung,s3c64xx-pinctrl",
 		.data = s3c64xx_pin_ctrl },
 #endif
+#ifdef CONFIG_PINCTRL_S3C24XX
+	{ .compatible = "samsung,s3c2413-pinctrl",
+		.data = s3c2413_pin_ctrl },
+	{ .compatible = "samsung,s3c2416-pinctrl",
+		.data = s3c2416_pin_ctrl },
+	{ .compatible = "samsung,s3c2440-pinctrl",
+		.data = s3c2440_pin_ctrl },
+	{ .compatible = "samsung,s3c2450-pinctrl",
+		.data = s3c2450_pin_ctrl },
+#endif
 	{},
 };
 MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
drivers/pinctrl/pinctrl-samsung.h +16 -0
index 7c7f9eb..8bd317c 100644
@@ -81,6 +81,16 @@ enum eint_type {
 	EINT_TYPE_WKUP_MUX,
 };
 
+/**
+ * enum ctrl_type - variances of a pin controller type
+ * @S3C24XX: generic s3c24xx pin handling
+ * @S3C2412: s3c2412-type eints, existing in the main and eint controllers
+ */
+enum ctrl_type {
+	S3C24XX,
+	S3C2412,
+};
+
 /* maximum length of a pin in pin descriptor (example: "gpa0-0") */
 #define PIN_NAME_LENGTH	10
 
@@ -164,6 +174,7 @@ struct samsung_pin_bank {
  * @eint_wkup_init: platform specific callback to setup the external wakeup
  *	interrupts for the controller.
  * @label: for debug information.
+ * @type: type of pin-controller
  */
 struct samsung_pin_ctrl {
 	struct samsung_pin_bank	*pin_banks;
@@ -185,6 +196,7 @@ struct samsung_pin_ctrl {
 	int		(*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
 	int		(*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
 	char		*label;
+	enum ctrl_type	type;
 };
 
 /**
@@ -246,5 +258,9 @@ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2413_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2440_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2450_pin_ctrl[];
 
 #endif /* __PINCTRL_SAMSUNG_H */
Signature · 1 line
1.7.2.3
#1 lore raw

PATCH v2 1/1 pinctrl: Add pinctrl-s3c24xx driver

Hi Heiko,

As previously, generally looks good to me, but see my comments inline.

Quoted 9 lines · On Thursday 11 of April 2013 01:16:41 Heiko St?bner wrote:

The s3c24xx pins follow a similar pattern as the other Samsung SoCs and can therefore reuse the already introduced infrastructure.

The s3c24xx SoCs have one design oddity in that the first 4 external interrupts do not reside in the eint pending register but in the main interrupt controller instead. We solve this by forwarding the external interrupt from the main controller into the irq domain of the pin bank. The masking/acking of these interrupts is handled in the same way.

Quoted 4 lines

Furthermore the S3C2412/2413 SoCs contain another oddity in that they keep the same 4 eints in the main interrupt controller and eintpend register and requiring ack operations to happen in both. To solve this a ctrl_type enum is introduced which can keep the type of controller

Hmm, I think you forgot to edit the commit message, since we decided to replace ctrl_type with another compatible string.

Quoted 6 lines

in the samsung_pin_ctrl struct for later retrieval.

The ctrl_type enum contains only S3C24XX and S3C2412 types, as the eint-speciality is currently the only use-case. But it can be expaned if other SoCs gain special handling requirements later on.

Quoted 7 lines

---
changes since v1:
- address comments from Tomasz Figa:
* split handling functions for eints 0-3 for s3c2412 and all others
* change the handling for s3c2412 eints 0-3 in that they now use chained_irq_* for the outer parent interrupt

OK, so you finally decided to use the way I suggested. Have you managed to do some testing on a S3C2412?

Quoted 170 lines
 .../bindings/pinctrl/samsung-pinctrl.txt           |    8 +
 drivers/gpio/gpio-samsung.c                        |    4 +
 drivers/pinctrl/Kconfig                            |    5 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-s3c24xx.c                  |  664
++++++++++++++++++++ drivers/pinctrl/pinctrl-samsung.c                  |  
10 +
 drivers/pinctrl/pinctrl-samsung.h                  |   16 +
 7 files changed, 708 insertions(+), 0 deletions(-)
 create mode 100644 drivers/pinctrl/pinctrl-s3c24xx.c
(quoted diff) +0 -0

b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index c70fca1..e4443e3 100644

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +4 -1
@@ -7,6 +7,10 @@ on-chip controllers onto these pads.
 
 Required Properties:
 - compatible: should be one of the following.
+  - "samsung,s3c2413-pinctrl": for S3C64xx-compatible pin-controller,
+  - "samsung,s3c2416-pinctrl": for S3C64xx-compatible pin-controller,
+  - "samsung,s3c2440-pinctrl": for S3C64xx-compatible pin-controller,
+  - "samsung,s3c2450-pinctrl": for S3C64xx-compatible pin-controller,
   - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
   - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
- "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
@@ -106,6 +110,10 @@ B. External Wakeup Interrupts: For supporting external

wakeup interrupts, a

- compatible: identifies the type of the external wakeup interrupt
controller The possible values are:

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +4 -0
+     - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
+     - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung S3C2412 and S3C2413 SoCs,
      - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
        found on Samsung S3C64xx SoCs,
      - samsung,exynos4210-wakeup-eint: represents wakeup interrupt

controller diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index dc06a6f..73017b9 100644

drivers/gpio/gpio-samsung.c +4 -0
@@ -3026,6 +3026,10 @@ static __init int samsung_gpiolib_init(void)
 	*/
 	struct device_node *pctrl_np;
 	static const struct of_device_id exynos_pinctrl_ids[] = {
+		{ .compatible = "samsung,s3c2413-pinctrl", },
+		{ .compatible = "samsung,s3c2416-pinctrl", },
+		{ .compatible = "samsung,s3c2440-pinctrl", },
+		{ .compatible = "samsung,s3c2450-pinctrl", },
 		{ .compatible = "samsung,s3c64xx-pinctrl", },
 		{ .compatible = "samsung,exynos4210-pinctrl", },
 		{ .compatible = "samsung,exynos4x12-pinctrl", },
drivers/pinctrl/Kconfig +5 -0
index 7402ac9..58d73ac 100644
@@ -226,6 +226,11 @@ config PINCTRL_EXYNOS5440
 	select PINMUX
 	select PINCONF
 
+config PINCTRL_S3C24XX
+	bool "Samsung S3C24XX SoC pinctrl driver"
+	depends on ARCH_S3C24XX
+	select PINCTRL_SAMSUNG
+
 config PINCTRL_S3C64XX
 	bool "Samsung S3C64XX SoC pinctrl driver"
 	depends on ARCH_S3C64XX
drivers/pinctrl/Makefile +1 -0
index 21d34c2..1ccdfd8 100644
@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
 obj-$(CONFIG_PINCTRL_EXYNOS)	+= pinctrl-exynos.o
 obj-$(CONFIG_PINCTRL_EXYNOS5440)	+= pinctrl-exynos5440.o
+obj-$(CONFIG_PINCTRL_S3C24XX)	+= pinctrl-s3c24xx.o
 obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
(quoted diff) +0 -0

b/drivers/pinctrl/pinctrl-s3c24xx.c new file mode 100644 index 0000000..8dffa2a

drivers/pinctrl/pinctrl-s3c24xx.c new file +11 -0
@@ -0,0 +1,664 @@
+/*
+ * S3C24XX specific support for Samsung pinctrl/gpiolib driver.
+ *
+ * Copyright (c) 2013 Heiko Stuebner <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file contains the SamsungS3C24XX specific information required by

the + * the Samsung pinctrl/gpiolib driver. It also includes the implementation of + * external gpio and wakeup interrupt support.
+ */

drivers/pinctrl/pinctrl-s3c24xx.c new file +67 -0
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/mach/irq.h>
+
+#include "pinctrl-samsung.h"
+
+#define NUM_EINT	24
+#define NUM_EINT_IRQ	6
+#define EINT_MAX_PER_GROUP	8
+
+#define EINTPEND_REG	0xa8
+#define EINTMASK_REG	0xa4
+
+#define EINT_GROUP(i)		((int)((i) / EINT_MAX_PER_GROUP))
+#define EINT_REG(i)		((EINT_GROUP(i) * 4) + 0x88)
+#define EINT_OFFS(i)		((i) % EINT_MAX_PER_GROUP * 4)
+
+#define EINT_LEVEL_LOW		0
+#define EINT_LEVEL_HIGH		1
+#define EINT_EDGE_FALLING	2
+#define EINT_EDGE_RISING	4
+#define EINT_EDGE_BOTH		6
+#define EINT_MASK		0xf
+
+static struct samsung_pin_bank_type bank_type_1bit = {
+	.fld_width = { 1, 1, },
+	.reg_offset = { 0x00, 0x04, },
+};
+
+static struct samsung_pin_bank_type bank_type_2bit = {
+	.fld_width = { 2, 1, 2, },
+	.reg_offset = { 0x00, 0x04, 0x08, },
+};
+
+#define PIN_BANK_A(pins, reg, id)		\
+	{						\
+		.type		= &bank_type_1bit,	\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.eint_type	= EINT_TYPE_NONE,	\
+		.name		= id			\
+	}
+
+#define PIN_BANK_2BIT(pins, reg, id)		\
+	{						\
+		.type		= &bank_type_2bit,	\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.eint_type	= EINT_TYPE_NONE,	\
+		.name		= id			\
+	}
+
+#define PIN_BANK_2BIT_EINTW(pins, reg, id, eoffs, emask)\
+	{						\
+		.type		= &bank_type_2bit,	\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.eint_type	= EINT_TYPE_WKUP,	\

drivers/pinctrl/pinctrl-s3c24xx.c line 91

Quoted 10 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +10 -0
+		.eint_func	= 2,			\
+		.eint_mask	= emask,		\
+		.eint_offset	= eoffs,		\
+		.name		= id			\
+	}
+
+/**
+ * struct s3c24xx_eint_data: EINT common data
+ * @drvdata: pin controller driver data
+ * @domains: IRQ domains of particular EINT interrupts

@parents:

drivers/pinctrl/pinctrl-s3c24xx.c line 98

Quoted 7 lines

+ */

drivers/pinctrl/pinctrl-s3c24xx.c new file +6 -0
+struct s3c24xx_eint_data {
+	struct samsung_pinctrl_drv_data *drvdata;
+	struct irq_domain *domains[NUM_EINT];
+	int parents[NUM_EINT_IRQ];
+};
+

I wonder if this struct should be documented as well.

Quoted 100 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +100 -0
+struct s3c24xx_eint_domain_data {
+	struct samsung_pin_bank *bank;
+	struct s3c24xx_eint_data *eint_data;
+	bool eint0_3_parent_only;
+};
+
+static int s3c24xx_eint_get_trigger(unsigned int type)
+{
+	int trigger;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		trigger = EINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		trigger = EINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		trigger = EINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		trigger = EINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		trigger = EINT_LEVEL_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return trigger;
+}
+
+static void s3c24xx_eint_set_handler(unsigned int irq, unsigned int type)
+{
+	/* Edge- and level-triggered interrupts need different handlers */
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		__irq_set_handler_locked(irq, handle_edge_irq);
+	else
+		__irq_set_handler_locked(irq, handle_level_irq);
+}
+
+static void s3c24xx_eint_set_function(struct samsung_pinctrl_drv_data *d,
+					struct samsung_pin_bank *bank, int pin)
+{
+	struct samsung_pin_bank_type *bank_type = bank->type;
+	unsigned long flags;
+	void __iomem *reg;
+	u8 shift;
+	u32 mask;
+	u32 val;
+
+	/* Make sure that pin is configured as interrupt */
+	reg = d->virt_base + bank->pctl_offset;
+	shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
+	mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
+
+	spin_lock_irqsave(&bank->slock, flags);
+
+	val = readl(reg);
+	val &= ~(mask << shift);
+	val |= bank->eint_func << shift;
+	writel(val, reg);
+
+	spin_unlock_irqrestore(&bank->slock, flags);
+}
+
+static int s3c24xx_eint_type(struct irq_data *data, unsigned int type)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	int index = bank->eint_offset + data->hwirq;
+	void __iomem *reg;
+	int trigger;
+	u8 shift;
+	u32 val;
+
+	trigger = s3c24xx_eint_get_trigger(type);
+	if (trigger < 0) {
+		dev_err(d->dev, "unsupported external interrupt type\n");
+		return -EINVAL;
+	}
+
+	s3c24xx_eint_set_handler(data->irq, type);
+
+	/* Set up interrupt trigger */
+	reg = d->virt_base + EINT_REG(index);
+	shift = EINT_OFFS(index);
+
+	val = readl(reg);
+	val &= ~(EINT_MASK << shift);
+	val |= trigger << shift;
+	writel(val, reg);
+
+	s3c24xx_eint_set_function(d, bank, data->hwirq);
+
+	return 0;
+}
+
+/* handling of EINTs 0-3 on all except S3C2412 and S3C2413 */

drivers/pinctrl/pinctrl-s3c24xx.c line 208

Quoted 10 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +10 -0
+
+static void s3c2410_eint0_3_ack(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+	struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+	int parent_irq = eint_data->parents[data->hwirq];
+	struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+	if (likely(parent_chip))

Hmm, is it possible that there is no parent chip here?

drivers/pinctrl/pinctrl-s3c24xx.c line 220

Quoted 12 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +12 -0
+		parent_chip->irq_ack(irq_get_irq_data(parent_irq));
+}
+
+static void s3c2410_eint0_3_mask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+	struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+	int parent_irq = eint_data->parents[data->hwirq];
+	struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+	if (likely(parent_chip))

Ditto.

drivers/pinctrl/pinctrl-s3c24xx.c line 232

Quoted 12 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +12 -0
+		parent_chip->irq_mask(irq_get_irq_data(parent_irq));
+}
+
+static void s3c2410_eint0_3_unmask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+	struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+	int parent_irq = eint_data->parents[data->hwirq];
+	struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+	if (likely(parent_chip))

Ditto.

Quoted 349 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +133 -0
+		parent_chip->irq_unmask(irq_get_irq_data(parent_irq));
+}
+
+static struct irq_chip s3c2410_eint0_3_chip = {
+	.name		= "s3c2410-eint0_3",
+	.irq_ack	= s3c2410_eint0_3_ack,
+	.irq_mask	= s3c2410_eint0_3_mask,
+	.irq_unmask	= s3c2410_eint0_3_unmask,
+	.irq_set_type	= s3c24xx_eint_type,
+};
+
+static void s3c2410_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
+	unsigned int virq;
+
+	/* the first 4 eints have a simple 1 to 1 mapping */
+	virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq);
+	/* Something must be really wrong if an unmapped EINT
+	 * was unmasked...
+	 */
+	BUG_ON(!virq);
+
+	generic_handle_irq(virq);
+}
+
+/* handling of EINTs 0-3 on S3C2412 and S3C2413 */
+
+static void s3c2412_eint0_3_ack(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+
+	unsigned long bitval = 1UL << data->hwirq;
+	writel(bitval, d->virt_base + EINTPEND_REG);
+}
+
+static void s3c2412_eint0_3_mask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask |= (1UL << data->hwirq);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static void s3c2412_eint0_3_unmask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask &= ~(1UL << data->hwirq);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static struct irq_chip s3c2412_eint0_3_chip = {
+	.name		= "s3c2412-eint0_3",
+	.irq_ack	= s3c2412_eint0_3_ack,
+	.irq_mask	= s3c2412_eint0_3_mask,
+	.irq_unmask	= s3c2412_eint0_3_unmask,
+	.irq_set_type	= s3c24xx_eint_type,
+};
+
+static void s3c2412_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
+	unsigned int virq;
+
+	chained_irq_enter(chip, desc);
+
+	/* the first 4 eints have a simple 1 to 1 mapping */
+	virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq);
+	/* Something must be really wrong if an unmapped EINT
+	 * was unmasked...
+	 */
+	BUG_ON(!virq);
+
+	generic_handle_irq(virq);
+
+	chained_irq_exit(chip, desc);
+}
+
+/* handling of all other eints */
+
+static void s3c24xx_eint_ack(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned char index = bank->eint_offset + data->hwirq;
+
+	writel(1UL << index, d->virt_base + EINTPEND_REG);
+}
+
+static void s3c24xx_eint_mask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned char index = bank->eint_offset + data->hwirq;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask |= (1UL << index);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static void s3c24xx_eint_unmask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned char index = bank->eint_offset + data->hwirq;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask &= ~(1UL << index);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static struct irq_chip s3c24xx_eint_chip = {
+	.name		= "s3c-eint",
+	.irq_ack	= s3c24xx_eint_ack,
+	.irq_mask	= s3c24xx_eint_mask,
+	.irq_unmask	= s3c24xx_eint_unmask,
+	.irq_set_type	= s3c24xx_eint_type,
+};
+
+static inline void s3c24xx_demux_eint(unsigned int irq, struct irq_desc

*desc, + u32 offset, u32 range)

drivers/pinctrl/pinctrl-s3c24xx.c new file +215 -0
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	struct s3c24xx_eint_data *data = irq_get_handler_data(irq);
+	struct samsung_pinctrl_drv_data *d = data->drvdata;
+	unsigned int pend, mask;
+
+	chained_irq_enter(chip, desc);
+
+	pend = readl(d->virt_base + EINTPEND_REG);
+	mask = readl(d->virt_base + EINTMASK_REG);
+
+	pend &= ~mask;
+	pend &= range;
+
+	while (pend) {
+		unsigned int virq;
+
+		irq = __ffs(pend);
+		pend &= ~(1 << irq);
+		virq = irq_linear_revmap(data->domains[irq], irq - offset);
+		/* Something must be really wrong if an unmapped EINT
+		 * was unmasked...
+		 */
+		BUG_ON(!virq);
+
+		generic_handle_irq(virq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void s3c24xx_demux_eint4_7(unsigned int irq, struct irq_desc *desc)
+{
+	s3c24xx_demux_eint(irq, desc, 0, 0xf0);
+}
+
+static void s3c24xx_demux_eint8_23(unsigned int irq, struct irq_desc *desc)
+{
+	s3c24xx_demux_eint(irq, desc, 8, 0xffff00);
+}
+
+static irq_flow_handler_t s3c2410_eint_handlers[NUM_EINT_IRQ] = {
+	s3c2410_demux_eint0_3,
+	s3c2410_demux_eint0_3,
+	s3c2410_demux_eint0_3,
+	s3c2410_demux_eint0_3,
+	s3c24xx_demux_eint4_7,
+	s3c24xx_demux_eint8_23,
+};
+
+static irq_flow_handler_t s3c2412_eint_handlers[NUM_EINT_IRQ] = {
+	s3c2412_demux_eint0_3,
+	s3c2412_demux_eint0_3,
+	s3c2412_demux_eint0_3,
+	s3c2412_demux_eint0_3,
+	s3c24xx_demux_eint4_7,
+	s3c24xx_demux_eint8_23,
+};
+
+static int s3c24xx_gpf_irq_map(struct irq_domain *h, unsigned int virq,
+					irq_hw_number_t hw)
+{
+	struct s3c24xx_eint_domain_data *ddata = h->host_data;
+	struct samsung_pin_bank *bank = ddata->bank;
+
+	if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
+		return -EINVAL;
+
+	if (hw <= 3) {
+		if (ddata->eint0_3_parent_only)
+			irq_set_chip_and_handler(virq, &s3c2410_eint0_3_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c2412_eint0_3_chip,
+						 handle_edge_irq);
+	} else {
+		irq_set_chip_and_handler(virq, &s3c24xx_eint_chip,
+					 handle_edge_irq);
+	}
+	irq_set_chip_data(virq, bank);
+	set_irq_flags(virq, IRQF_VALID);
+	return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_gpf_irq_ops = {
+	.map	= s3c24xx_gpf_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static int s3c24xx_gpg_irq_map(struct irq_domain *h, unsigned int virq,
+					irq_hw_number_t hw)
+{
+	struct s3c24xx_eint_domain_data *ddata = h->host_data;
+	struct samsung_pin_bank *bank = ddata->bank;
+
+	if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
+		return -EINVAL;
+
+	irq_set_chip_and_handler(virq, &s3c24xx_eint_chip, handle_edge_irq);
+	irq_set_chip_data(virq, bank);
+	set_irq_flags(virq, IRQF_VALID);
+	return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_gpg_irq_ops = {
+	.map	= s3c24xx_gpg_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static const struct of_device_id s3c24xx_eint_irq_ids[] = {
+	{ .compatible = "samsung,s3c2410-wakeup-eint", .data = (void *)1 },
+	{ .compatible = "samsung,s3c2412-wakeup-eint", .data = (void *)0 },
+	{ }
+};
+
+static int s3c24xx_eint_init(struct samsung_pinctrl_drv_data *d)
+{
+	struct device *dev = d->dev;
+	const struct of_device_id *match;
+	struct device_node *eint_np = NULL;
+	struct device_node *np;
+	struct samsung_pin_bank *bank;
+	struct s3c24xx_eint_data *eint_data;
+	const struct irq_domain_ops *ops;
+	unsigned int i;
+	bool eint0_3_parent_only;
+	irq_flow_handler_t *handlers;
+
+	for_each_child_of_node(dev->of_node, np) {
+		match = of_match_node(s3c24xx_eint_irq_ids, np);
+		if (match) {
+			eint_np = np;
+			eint0_3_parent_only = (bool)match->data;
+			break;
+		}
+	}
+	if (!eint_np)
+		return -ENODEV;
+
+	eint_data = devm_kzalloc(dev, sizeof(*eint_data), GFP_KERNEL);
+	if (!eint_data) {
+		dev_err(dev, "could not allocate memory for wkup eint data\n");
+		return -ENOMEM;
+	}
+	eint_data->drvdata = d;
+
+	handlers = eint0_3_parent_only ? s3c2410_eint_handlers
+				       : s3c2412_eint_handlers;
+	for (i = 0; i < NUM_EINT_IRQ; ++i) {
+		unsigned int irq;
+
+		irq = irq_of_parse_and_map(eint_np, i);
+		if (!irq) {
+			dev_err(dev, "failed to get wakeup EINT IRQ %d\n", i);
+			return -ENXIO;
+		}
+
+		eint_data->parents[i] = irq;
+		irq_set_chained_handler(irq, handlers[i]);
+		irq_set_handler_data(irq, eint_data);
+	}
+
+	bank = d->ctrl->pin_banks;
+	for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
+		struct s3c24xx_eint_domain_data *ddata;
+		unsigned int mask;
+		unsigned int irq;
+		unsigned int pin;
+
+		if (bank->eint_type != EINT_TYPE_WKUP)
+			continue;
+
+		ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+		if (!ddata) {
+			dev_err(dev, "failed to allocate domain data\n");
+			return -ENOMEM;
+		}
+		ddata->bank = bank;
+		ddata->eint_data = eint_data;
+		ddata->eint0_3_parent_only = eint0_3_parent_only;
+
+		ops = (bank->eint_offset == 0) ? &s3c24xx_gpf_irq_ops
+					       : &s3c24xx_gpg_irq_ops;
+
+		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+				bank->nr_pins, ops, ddata);
+		if (!bank->irq_domain) {
+			dev_err(dev, "wkup irq domain add failed\n");
+			return -ENXIO;
+		}
+
+		irq = bank->eint_offset;
+		mask = bank->eint_mask;
+		for (pin = 0; mask; ++pin, mask >>= 1) {
+			if (irq > NUM_EINT)
+				break;
+			if (!(mask & 1))
+				continue;
+			eint_data->domains[irq] = bank->irq_domain;
+			++irq;
+		}
+	}
+
+	return 0;
+}
+
+static struct samsung_pin_bank s3c2413_pin_banks[] = {
+	PIN_BANK_A(23, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+	PIN_BANK_2BIT(11, 0x070, "gph"),

drivers/pinctrl/pinctrl-s3c24xx.c line 591

Quoted 10 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +10 -0
+	PIN_BANK_2BIT(13, 0x080, "gpj"),
+};
+
+struct samsung_pin_ctrl s3c2413_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2413_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2413_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2413-GPIO",
+		.type		= S3C2412,

This should be removed as well, shouldn't it?

Quoted 14 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +14 -0
+	},
+};
+
+static struct samsung_pin_bank s3c2416_pin_banks[] = {
+	PIN_BANK_A(27, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(8, 0x060, "gpg", 8, 0xff00),
+	PIN_BANK_2BIT(15, 0x070, "gph"),
+	PIN_BANK_2BIT(16, 0x0e0, "gpk"),
+	PIN_BANK_2BIT(14, 0x0f0, "gpl"),

drivers/pinctrl/pinctrl-s3c24xx.c line 615

Quoted 10 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +10 -0
+	PIN_BANK_2BIT(2, 0x100, "gpm"),
+};
+
+struct samsung_pin_ctrl s3c2416_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2416_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2416_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2416-GPIO",
+		.type		= S3C24XX,

Ditto.

Quoted 12 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +12 -0
+	},
+};
+
+static struct samsung_pin_bank s3c2440_pin_banks[] = {
+	PIN_BANK_A(25, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+	PIN_BANK_2BIT(11, 0x070, "gph"),

drivers/pinctrl/pinctrl-s3c24xx.c line 637

Quoted 10 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +10 -0
+	PIN_BANK_2BIT(13, 0x0d0, "gpj"),
+};
+
+struct samsung_pin_ctrl s3c2440_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2440_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2440_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2440-GPIO",
+		.type		= S3C24XX,

Ditto.

Quoted 15 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +15 -0
+	},
+};
+
+static struct samsung_pin_bank s3c2450_pin_banks[] = {
+	PIN_BANK_A(28, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+	PIN_BANK_2BIT(15, 0x070, "gph"),
+	PIN_BANK_2BIT(16, 0x0d0, "gpj"),
+	PIN_BANK_2BIT(16, 0x0e0, "gpk"),
+	PIN_BANK_2BIT(15, 0x0f0, "gpl"),

drivers/pinctrl/pinctrl-s3c24xx.c line 662

Quoted 10 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +10 -0
+	PIN_BANK_2BIT(2, 0x100, "gpm"),
+};
+
+struct samsung_pin_ctrl s3c2450_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2450_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2450_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2450-GPIO",
+		.type		= S3C24XX,

Ditto.

Quoted 30 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +2 -0
+	},
+};
(quoted diff) +0 -0

b/drivers/pinctrl/pinctrl-samsung.c index e836135..234c32f 100644

drivers/pinctrl/pinctrl-samsung.c +10 -0
@@ -977,6 +977,16 @@ static const struct of_device_id
 samsung_pinctrl_dt_match[] = { { .compatible = "samsung,s3c64xx-pinctrl",
 		.data = s3c64xx_pin_ctrl },
 #endif
+#ifdef CONFIG_PINCTRL_S3C24XX
+	{ .compatible = "samsung,s3c2413-pinctrl",
+		.data = s3c2413_pin_ctrl },
+	{ .compatible = "samsung,s3c2416-pinctrl",
+		.data = s3c2416_pin_ctrl },
+	{ .compatible = "samsung,s3c2440-pinctrl",
+		.data = s3c2440_pin_ctrl },
+	{ .compatible = "samsung,s3c2450-pinctrl",
+		.data = s3c2450_pin_ctrl },
+#endif
 	{},
 };
 MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
(quoted diff) +0 -0

b/drivers/pinctrl/pinctrl-samsung.h index 7c7f9eb..8bd317c 100644

drivers/pinctrl/pinctrl-samsung.h +0 -0
@@ -81,6 +81,16 @@ enum eint_type {
 	EINT_TYPE_WKUP_MUX,
 };

drivers/pinctrl/pinctrl-samsung.h enum eint_type { · line 92

Quoted 10 lines
drivers/pinctrl/pinctrl-samsung.h +9 -0
 
+/**
+ * enum ctrl_type - variances of a pin controller type
+ * @S3C24XX: generic s3c24xx pin handling
+ * @S3C2412: s3c2412-type eints, existing in the main and eint controllers
+ */
+enum ctrl_type {
+	S3C24XX,
+	S3C2412,
+};

Diito.

Quoted 13 lines
drivers/pinctrl/pinctrl-samsung.h +2 -0
+
 /* maximum length of a pin in pin descriptor (example: "gpa0-0") */
 #define PIN_NAME_LENGTH	10
 
@@ -164,6 +174,7 @@ struct samsung_pin_bank {
  * @eint_wkup_init: platform specific callback to setup the external wakeup
 *	interrupts for the controller.
  * @label: for debug information.
+ * @type: type of pin-controller
  */
 struct samsung_pin_ctrl {
 	struct samsung_pin_bank	*pin_banks;

drivers/pinctrl/pinctrl-samsung.h struct samsung_pin_ctrl { · line 199

Quoted 4 lines
drivers/pinctrl/pinctrl-samsung.h +1 -0
@@ -185,6 +196,7 @@ struct samsung_pin_ctrl {
 	int		(*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
 	int		(*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
 	char		*label;
+	enum ctrl_type	type;

Ditto.

Best regards,
--
Tomasz Figa
Samsung Poland R&D Center
SW Solution Development, Kernel and System Framework

Quoted 13 lines
drivers/pinctrl/pinctrl-samsung.h +4 -0
 };
 
 /**
@@ -246,5 +258,9 @@ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2413_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2440_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2450_pin_ctrl[];
 
 #endif /* __PINCTRL_SAMSUNG_H */
#2 lore raw

PATCH v2 1/1 pinctrl: Add pinctrl-s3c24xx driver

Am Donnerstag, 11. April 2013, 10:54:45 schrieb Tomasz Figa:

Quoted 14 lines

Hi Heiko,

As previously, generally looks good to me, but see my comments inline.

Quoted 9 lines · On Thursday 11 of April 2013 01:16:41 Heiko St?bner wrote:

The s3c24xx pins follow a similar pattern as the other Samsung SoCs and can therefore reuse the already introduced infrastructure.

The s3c24xx SoCs have one design oddity in that the first 4 external interrupts do not reside in the eint pending register but in the main interrupt controller instead. We solve this by forwarding the external interrupt from the main controller into the irq domain of the pin bank. The masking/acking of these interrupts is handled in the same way.

Quoted 7 lines
Quoted 4 lines

Furthermore the S3C2412/2413 SoCs contain another oddity in that they keep the same 4 eints in the main interrupt controller and eintpend register and requiring ack operations to happen in both. To solve this a ctrl_type enum is introduced which can keep the type of controller

Hmm, I think you forgot to edit the commit message, since we decided to replace ctrl_type with another compatible string.

One should not do these things after midnight :-) [true for most of the other mistakes below too].

Quoted 10 lines
Quoted 10 lines

in the samsung_pin_ctrl struct for later retrieval.

The ctrl_type enum contains only S3C24XX and S3C2412 types, as the eint-speciality is currently the only use-case. But it can be expaned if other SoCs gain special handling requirements later on.

---
changes since v1:

Quoted 8 lines
Quoted 5 lines

- address comments from Tomasz Figa:
* split handling functions for eints 0-3 for s3c2412 and all others
* change the handling for s3c2412 eints 0-3 in that they now use

chained_irq_* for the outer parent interrupt

OK, so you finally decided to use the way I suggested. Have you managed to do some testing on a S3C2412?

Nope, after pondering everything a bit more ... your description just sounded more plausible :-) . I only have access to s3c2416 and s3c2450 boards, so everything else is just done according to datasheets and in the hope of it being correct. S3C2412 is really the only familiy member having the 4 eints in both registers.

Also the (reworked) legacy eint code also uses this scheme ... so at least now both are either correct or wrong. We will only know if someone with a s3c2412 comes along at some point :-) .

Quoted 197 lines
Quoted 197 lines
 .../bindings/pinctrl/samsung-pinctrl.txt           |    8 +
 drivers/gpio/gpio-samsung.c                        |    4 +
 drivers/pinctrl/Kconfig                            |    5 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-s3c24xx.c                  |  664

++++++++++++++++++++ drivers/pinctrl/pinctrl-samsung.c |
10 +

 drivers/pinctrl/pinctrl-samsung.h                  |   16 +
 7 files changed, 708 insertions(+), 0 deletions(-)
 create mode 100644 drivers/pinctrl/pinctrl-s3c24xx.c

diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index c70fca1..e4443e3 100644

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +4 -0
@@ -7,6 +7,10 @@ on-chip controllers onto these pads.
 
 Required Properties:
 - compatible: should be one of the following.
 
+  - "samsung,s3c2413-pinctrl": for S3C64xx-compatible pin-controller,
+  - "samsung,s3c2416-pinctrl": for S3C64xx-compatible pin-controller,
+  - "samsung,s3c2440-pinctrl": for S3C64xx-compatible pin-controller,
+  - "samsung,s3c2450-pinctrl": for S3C64xx-compatible pin-controller,
 
   - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,

- "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.

- "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +0 -0
@@ -106,6 +110,10 @@ B. External Wakeup Interrupts: For supporting

external wakeup interrupts, a

- compatible: identifies the type of the external wakeup interrupt

controller The possible values are:
+ - samsung,s3c2410-wakeup-eint: represents wakeup interrupt
controller + found on Samsung S3C24xx SoCs except S3C2412 and
S3C2413, + - samsung,s3c2412-wakeup-eint: represents wakeup
interrupt controller + found on Samsung S3C2412 and S3C2413 SoCs,

- samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller

found on Samsung S3C64xx SoCs,

- samsung,exynos4210-wakeup-eint: represents wakeup interrupt

controller diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index dc06a6f..73017b9 100644

drivers/gpio/gpio-samsung.c +4 -0
@@ -3026,6 +3026,10 @@ static __init int samsung_gpiolib_init(void)
 
 	*/
 	struct device_node *pctrl_np;
 	static const struct of_device_id exynos_pinctrl_ids[] = {
 
+		{ .compatible = "samsung,s3c2413-pinctrl", },
+		{ .compatible = "samsung,s3c2416-pinctrl", },
+		{ .compatible = "samsung,s3c2440-pinctrl", },
+		{ .compatible = "samsung,s3c2450-pinctrl", },
 
drivers/gpio/gpio-samsung.c +0 -0
 		{ .compatible = "samsung,s3c64xx-pinctrl", },
 		{ .compatible = "samsung,exynos4210-pinctrl", },
 		{ .compatible = "samsung,exynos4x12-pinctrl", },
drivers/pinctrl/Kconfig +5 -0
index 7402ac9..58d73ac 100644
@@ -226,6 +226,11 @@ config PINCTRL_EXYNOS5440
 
 	select PINMUX
 	select PINCONF
 
+config PINCTRL_S3C24XX
+	bool "Samsung S3C24XX SoC pinctrl driver"
+	depends on ARCH_S3C24XX
+	select PINCTRL_SAMSUNG
+
 
 config PINCTRL_S3C64XX
drivers/pinctrl/Kconfig +0 -0
 	bool "Samsung S3C64XX SoC pinctrl driver"
 	depends on ARCH_S3C64XX
drivers/pinctrl/Makefile +1 -0
index 21d34c2..1ccdfd8 100644
@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
 obj-$(CONFIG_PINCTRL_EXYNOS)	+= pinctrl-exynos.o
 obj-$(CONFIG_PINCTRL_EXYNOS5440)	+= pinctrl-exynos5440.o
 
+obj-$(CONFIG_PINCTRL_S3C24XX)	+= pinctrl-s3c24xx.o
 

obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o

(quoted diff) +0 -0

b/drivers/pinctrl/pinctrl-s3c24xx.c new file mode 100644 index 0000000..8dffa2a

drivers/pinctrl/pinctrl-s3c24xx.c new file +11 -0
@@ -0,0 +1,664 @@
+/*
+ * S3C24XX specific support for Samsung pinctrl/gpiolib driver.
+ *
+ * Copyright (c) 2013 Heiko Stuebner <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file contains the SamsungS3C24XX specific information required

by the + * the Samsung pinctrl/gpiolib driver. It also includes the implementation of + * external gpio and wakeup interrupt support. + */

drivers/pinctrl/pinctrl-s3c24xx.c new file +71 -0
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/mach/irq.h>
+
+#include "pinctrl-samsung.h"
+
+#define NUM_EINT	24
+#define NUM_EINT_IRQ	6
+#define EINT_MAX_PER_GROUP	8
+
+#define EINTPEND_REG	0xa8
+#define EINTMASK_REG	0xa4
+
+#define EINT_GROUP(i)		((int)((i) / EINT_MAX_PER_GROUP))
+#define EINT_REG(i)		((EINT_GROUP(i) * 4) + 0x88)
+#define EINT_OFFS(i)		((i) % EINT_MAX_PER_GROUP * 4)
+
+#define EINT_LEVEL_LOW		0
+#define EINT_LEVEL_HIGH		1
+#define EINT_EDGE_FALLING	2
+#define EINT_EDGE_RISING	4
+#define EINT_EDGE_BOTH		6
+#define EINT_MASK		0xf
+
+static struct samsung_pin_bank_type bank_type_1bit = {
+	.fld_width = { 1, 1, },
+	.reg_offset = { 0x00, 0x04, },
+};
+
+static struct samsung_pin_bank_type bank_type_2bit = {
+	.fld_width = { 2, 1, 2, },
+	.reg_offset = { 0x00, 0x04, 0x08, },
+};
+
+#define PIN_BANK_A(pins, reg, id)		\
+	{						\
+		.type		= &bank_type_1bit,	\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.eint_type	= EINT_TYPE_NONE,	\
+		.name		= id			\
+	}
+
+#define PIN_BANK_2BIT(pins, reg, id)		\
+	{						\
+		.type		= &bank_type_2bit,	\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.eint_type	= EINT_TYPE_NONE,	\
+		.name		= id			\
+	}
+
+#define PIN_BANK_2BIT_EINTW(pins, reg, id, eoffs, emask)\
+	{						\
+		.type		= &bank_type_2bit,	\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.eint_type	= EINT_TYPE_WKUP,	\
+		.eint_func	= 2,			\
+		.eint_mask	= emask,		\
+		.eint_offset	= eoffs,		\
+		.name		= id			\
Quoted 8 lines

drivers/pinctrl/pinctrl-s3c24xx.c line 91

Quoted 6 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +6 -0
+	}
+
+/**
+ * struct s3c24xx_eint_data: EINT common data
+ * @drvdata: pin controller driver data
+ * @domains: IRQ domains of particular EINT interrupts

@parents:

ok

Quoted 9 lines

drivers/pinctrl/pinctrl-s3c24xx.c line 98

Quoted 7 lines

+ */

drivers/pinctrl/pinctrl-s3c24xx.c new file +6 -0
+struct s3c24xx_eint_data {
+	struct samsung_pinctrl_drv_data *drvdata;
+	struct irq_domain *domains[NUM_EINT];
+	int parents[NUM_EINT_IRQ];
+};
+

I wonder if this struct should be documented as well.

ok

Quoted 104 lines
Quoted 104 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +34 -0
+struct s3c24xx_eint_domain_data {
+	struct samsung_pin_bank *bank;
+	struct s3c24xx_eint_data *eint_data;
+	bool eint0_3_parent_only;
+};
+
+static int s3c24xx_eint_get_trigger(unsigned int type)
+{
+	int trigger;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		trigger = EINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		trigger = EINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		trigger = EINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		trigger = EINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		trigger = EINT_LEVEL_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return trigger;
+}
+
+static void s3c24xx_eint_set_handler(unsigned int irq, unsigned int

type) +{

drivers/pinctrl/pinctrl-s3c24xx.c new file +8 -0
+	/* Edge- and level-triggered interrupts need different handlers */
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		__irq_set_handler_locked(irq, handle_edge_irq);
+	else
+		__irq_set_handler_locked(irq, handle_level_irq);
+}
+
+static void s3c24xx_eint_set_function(struct samsung_pinctrl_drv_data

*d, + struct samsung_pin_bank *bank, int pin)

drivers/pinctrl/pinctrl-s3c24xx.c new file +60 -0
+{
+	struct samsung_pin_bank_type *bank_type = bank->type;
+	unsigned long flags;
+	void __iomem *reg;
+	u8 shift;
+	u32 mask;
+	u32 val;
+
+	/* Make sure that pin is configured as interrupt */
+	reg = d->virt_base + bank->pctl_offset;
+	shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
+	mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
+
+	spin_lock_irqsave(&bank->slock, flags);
+
+	val = readl(reg);
+	val &= ~(mask << shift);
+	val |= bank->eint_func << shift;
+	writel(val, reg);
+
+	spin_unlock_irqrestore(&bank->slock, flags);
+}
+
+static int s3c24xx_eint_type(struct irq_data *data, unsigned int type)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	int index = bank->eint_offset + data->hwirq;
+	void __iomem *reg;
+	int trigger;
+	u8 shift;
+	u32 val;
+
+	trigger = s3c24xx_eint_get_trigger(type);
+	if (trigger < 0) {
+		dev_err(d->dev, "unsupported external interrupt type\n");
+		return -EINVAL;
+	}
+
+	s3c24xx_eint_set_handler(data->irq, type);
+
+	/* Set up interrupt trigger */
+	reg = d->virt_base + EINT_REG(index);
+	shift = EINT_OFFS(index);
+
+	val = readl(reg);
+	val &= ~(EINT_MASK << shift);
+	val |= trigger << shift;
+	writel(val, reg);
+
+	s3c24xx_eint_set_function(d, bank, data->hwirq);
+
+	return 0;
+}
+
+/* handling of EINTs 0-3 on all except S3C2412 and S3C2413 */
+
+static void s3c2410_eint0_3_ack(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
Quoted 8 lines

drivers/pinctrl/pinctrl-s3c24xx.c line 208

Quoted 6 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +6 -0
+	struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+	struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+	int parent_irq = eint_data->parents[data->hwirq];
+	struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+	if (likely(parent_chip))

Hmm, is it possible that there is no parent chip here?

hmm ... irq_get_chip is null when irq_get_data fails. But when we reach these ack/mask/unmask functions, the demux of the parent irq already has retrieved the irq_data sucessfully once ... so they can go away

Quoted 385 lines

drivers/pinctrl/pinctrl-s3c24xx.c line 220

Quoted 12 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +12 -0
+		parent_chip->irq_ack(irq_get_irq_data(parent_irq));
+}
+
+static void s3c2410_eint0_3_mask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+	struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+	int parent_irq = eint_data->parents[data->hwirq];
+	struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+	if (likely(parent_chip))

Ditto.

drivers/pinctrl/pinctrl-s3c24xx.c line 232

Quoted 12 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +12 -0
+		parent_chip->irq_mask(irq_get_irq_data(parent_irq));
+}
+
+static void s3c2410_eint0_3_unmask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+	struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+	int parent_irq = eint_data->parents[data->hwirq];
+	struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+	if (likely(parent_chip))

Ditto.

Quoted 13 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +12 -0
+		parent_chip->irq_unmask(irq_get_irq_data(parent_irq));
+}
+
+static struct irq_chip s3c2410_eint0_3_chip = {
+	.name		= "s3c2410-eint0_3",
+	.irq_ack	= s3c2410_eint0_3_ack,
+	.irq_mask	= s3c2410_eint0_3_mask,
+	.irq_unmask	= s3c2410_eint0_3_unmask,
+	.irq_set_type	= s3c24xx_eint_type,
+};
+
+static void s3c2410_demux_eint0_3(unsigned int irq, struct irq_desc

*desc) +{

drivers/pinctrl/pinctrl-s3c24xx.c

Quoted 6 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +6 -0
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
+	unsigned int virq;
+
+	/* the first 4 eints have a simple 1 to 1 mapping */
+	virq = irq_linear_revmap(eint_data->domains[data->hwirq], data-

hwirq);

Quoted 51 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +50 -0
+	/* Something must be really wrong if an unmapped EINT
+	 * was unmasked...
+	 */
+	BUG_ON(!virq);
+
+	generic_handle_irq(virq);
+}
+
+/* handling of EINTs 0-3 on S3C2412 and S3C2413 */
+
+static void s3c2412_eint0_3_ack(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+
+	unsigned long bitval = 1UL << data->hwirq;
+	writel(bitval, d->virt_base + EINTPEND_REG);
+}
+
+static void s3c2412_eint0_3_mask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask |= (1UL << data->hwirq);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static void s3c2412_eint0_3_unmask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask &= ~(1UL << data->hwirq);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static struct irq_chip s3c2412_eint0_3_chip = {
+	.name		= "s3c2412-eint0_3",
+	.irq_ack	= s3c2412_eint0_3_ack,
+	.irq_mask	= s3c2412_eint0_3_mask,
+	.irq_unmask	= s3c2412_eint0_3_unmask,
+	.irq_set_type	= s3c24xx_eint_type,
+};
+
+static void s3c2412_demux_eint0_3(unsigned int irq, struct irq_desc

*desc) +{

drivers/pinctrl/pinctrl-s3c24xx.c

Quoted 9 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +9 -0
+	struct irq_chip *chip = irq_get_chip(irq);
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
+	unsigned int virq;
+
+	chained_irq_enter(chip, desc);
+
+	/* the first 4 eints have a simple 1 to 1 mapping */
+	virq = irq_linear_revmap(eint_data->domains[data->hwirq], data-

hwirq);

Quoted 274 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +54 -0
+	/* Something must be really wrong if an unmapped EINT
+	 * was unmasked...
+	 */
+	BUG_ON(!virq);
+
+	generic_handle_irq(virq);
+
+	chained_irq_exit(chip, desc);
+}
+
+/* handling of all other eints */
+
+static void s3c24xx_eint_ack(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned char index = bank->eint_offset + data->hwirq;
+
+	writel(1UL << index, d->virt_base + EINTPEND_REG);
+}
+
+static void s3c24xx_eint_mask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned char index = bank->eint_offset + data->hwirq;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask |= (1UL << index);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static void s3c24xx_eint_unmask(struct irq_data *data)
+{
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned char index = bank->eint_offset + data->hwirq;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + EINTMASK_REG);
+	mask &= ~(1UL << index);
+	writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static struct irq_chip s3c24xx_eint_chip = {
+	.name		= "s3c-eint",
+	.irq_ack	= s3c24xx_eint_ack,
+	.irq_mask	= s3c24xx_eint_mask,
+	.irq_unmask	= s3c24xx_eint_unmask,
+	.irq_set_type	= s3c24xx_eint_type,
+};
+
+static inline void s3c24xx_demux_eint(unsigned int irq, struct irq_desc

*desc, + u32 offset, u32 range)

drivers/pinctrl/pinctrl-s3c24xx.c new file +32 -0
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	struct s3c24xx_eint_data *data = irq_get_handler_data(irq);
+	struct samsung_pinctrl_drv_data *d = data->drvdata;
+	unsigned int pend, mask;
+
+	chained_irq_enter(chip, desc);
+
+	pend = readl(d->virt_base + EINTPEND_REG);
+	mask = readl(d->virt_base + EINTMASK_REG);
+
+	pend &= ~mask;
+	pend &= range;
+
+	while (pend) {
+		unsigned int virq;
+
+		irq = __ffs(pend);
+		pend &= ~(1 << irq);
+		virq = irq_linear_revmap(data->domains[irq], irq - offset);
+		/* Something must be really wrong if an unmapped EINT
+		 * was unmasked...
+		 */
+		BUG_ON(!virq);
+
+		generic_handle_irq(virq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void s3c24xx_demux_eint4_7(unsigned int irq, struct irq_desc

*desc) +{

drivers/pinctrl/pinctrl-s3c24xx.c new file +4 -0
+	s3c24xx_demux_eint(irq, desc, 0, 0xf0);
+}
+
+static void s3c24xx_demux_eint8_23(unsigned int irq, struct irq_desc

*desc) +{

drivers/pinctrl/pinctrl-s3c24xx.c new file +181 -0
+	s3c24xx_demux_eint(irq, desc, 8, 0xffff00);
+}
+
+static irq_flow_handler_t s3c2410_eint_handlers[NUM_EINT_IRQ] = {
+	s3c2410_demux_eint0_3,
+	s3c2410_demux_eint0_3,
+	s3c2410_demux_eint0_3,
+	s3c2410_demux_eint0_3,
+	s3c24xx_demux_eint4_7,
+	s3c24xx_demux_eint8_23,
+};
+
+static irq_flow_handler_t s3c2412_eint_handlers[NUM_EINT_IRQ] = {
+	s3c2412_demux_eint0_3,
+	s3c2412_demux_eint0_3,
+	s3c2412_demux_eint0_3,
+	s3c2412_demux_eint0_3,
+	s3c24xx_demux_eint4_7,
+	s3c24xx_demux_eint8_23,
+};
+
+static int s3c24xx_gpf_irq_map(struct irq_domain *h, unsigned int virq,
+					irq_hw_number_t hw)
+{
+	struct s3c24xx_eint_domain_data *ddata = h->host_data;
+	struct samsung_pin_bank *bank = ddata->bank;
+
+	if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
+		return -EINVAL;
+
+	if (hw <= 3) {
+		if (ddata->eint0_3_parent_only)
+			irq_set_chip_and_handler(virq, &s3c2410_eint0_3_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c2412_eint0_3_chip,
+						 handle_edge_irq);
+	} else {
+		irq_set_chip_and_handler(virq, &s3c24xx_eint_chip,
+					 handle_edge_irq);
+	}
+	irq_set_chip_data(virq, bank);
+	set_irq_flags(virq, IRQF_VALID);
+	return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_gpf_irq_ops = {
+	.map	= s3c24xx_gpf_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static int s3c24xx_gpg_irq_map(struct irq_domain *h, unsigned int virq,
+					irq_hw_number_t hw)
+{
+	struct s3c24xx_eint_domain_data *ddata = h->host_data;
+	struct samsung_pin_bank *bank = ddata->bank;
+
+	if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
+		return -EINVAL;
+
+	irq_set_chip_and_handler(virq, &s3c24xx_eint_chip, handle_edge_irq);
+	irq_set_chip_data(virq, bank);
+	set_irq_flags(virq, IRQF_VALID);
+	return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_gpg_irq_ops = {
+	.map	= s3c24xx_gpg_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static const struct of_device_id s3c24xx_eint_irq_ids[] = {
+	{ .compatible = "samsung,s3c2410-wakeup-eint", .data = (void *)1 },
+	{ .compatible = "samsung,s3c2412-wakeup-eint", .data = (void *)0 },
+	{ }
+};
+
+static int s3c24xx_eint_init(struct samsung_pinctrl_drv_data *d)
+{
+	struct device *dev = d->dev;
+	const struct of_device_id *match;
+	struct device_node *eint_np = NULL;
+	struct device_node *np;
+	struct samsung_pin_bank *bank;
+	struct s3c24xx_eint_data *eint_data;
+	const struct irq_domain_ops *ops;
+	unsigned int i;
+	bool eint0_3_parent_only;
+	irq_flow_handler_t *handlers;
+
+	for_each_child_of_node(dev->of_node, np) {
+		match = of_match_node(s3c24xx_eint_irq_ids, np);
+		if (match) {
+			eint_np = np;
+			eint0_3_parent_only = (bool)match->data;
+			break;
+		}
+	}
+	if (!eint_np)
+		return -ENODEV;
+
+	eint_data = devm_kzalloc(dev, sizeof(*eint_data), GFP_KERNEL);
+	if (!eint_data) {
+		dev_err(dev, "could not allocate memory for wkup eint data\n");
+		return -ENOMEM;
+	}
+	eint_data->drvdata = d;
+
+	handlers = eint0_3_parent_only ? s3c2410_eint_handlers
+				       : s3c2412_eint_handlers;
+	for (i = 0; i < NUM_EINT_IRQ; ++i) {
+		unsigned int irq;
+
+		irq = irq_of_parse_and_map(eint_np, i);
+		if (!irq) {
+			dev_err(dev, "failed to get wakeup EINT IRQ %d\n", i);
+			return -ENXIO;
+		}
+
+		eint_data->parents[i] = irq;
+		irq_set_chained_handler(irq, handlers[i]);
+		irq_set_handler_data(irq, eint_data);
+	}
+
+	bank = d->ctrl->pin_banks;
+	for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
+		struct s3c24xx_eint_domain_data *ddata;
+		unsigned int mask;
+		unsigned int irq;
+		unsigned int pin;
+
+		if (bank->eint_type != EINT_TYPE_WKUP)
+			continue;
+
+		ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+		if (!ddata) {
+			dev_err(dev, "failed to allocate domain data\n");
+			return -ENOMEM;
+		}
+		ddata->bank = bank;
+		ddata->eint_data = eint_data;
+		ddata->eint0_3_parent_only = eint0_3_parent_only;
+
+		ops = (bank->eint_offset == 0) ? &s3c24xx_gpf_irq_ops
+					       : &s3c24xx_gpg_irq_ops;
+
+		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+				bank->nr_pins, ops, ddata);
+		if (!bank->irq_domain) {
+			dev_err(dev, "wkup irq domain add failed\n");
+			return -ENXIO;
+		}
+
+		irq = bank->eint_offset;
+		mask = bank->eint_mask;
+		for (pin = 0; mask; ++pin, mask >>= 1) {
+			if (irq > NUM_EINT)
+				break;
+			if (!(mask & 1))
+				continue;
+			eint_data->domains[irq] = bank->irq_domain;
+			++irq;
+		}
+	}
+
+	return 0;
+}
+
+static struct samsung_pin_bank s3c2413_pin_banks[] = {
+	PIN_BANK_A(23, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+	PIN_BANK_2BIT(11, 0x070, "gph"),
+	PIN_BANK_2BIT(13, 0x080, "gpj"),
+};
+
+struct samsung_pin_ctrl s3c2413_pin_ctrl[] = {
Quoted 8 lines

drivers/pinctrl/pinctrl-s3c24xx.c line 591

Quoted 6 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +6 -0
+	{
+		.pin_banks	= s3c2413_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2413_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2413-GPIO",
+		.type		= S3C2412,

This should be removed as well, shouldn't it?

yes of course

Quoted 185 lines
Quoted 14 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +14 -0
+	},
+};
+
+static struct samsung_pin_bank s3c2416_pin_banks[] = {
+	PIN_BANK_A(27, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(8, 0x060, "gpg", 8, 0xff00),
+	PIN_BANK_2BIT(15, 0x070, "gph"),
+	PIN_BANK_2BIT(16, 0x0e0, "gpk"),
+	PIN_BANK_2BIT(14, 0x0f0, "gpl"),

drivers/pinctrl/pinctrl-s3c24xx.c line 615

Quoted 10 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +10 -0
+	PIN_BANK_2BIT(2, 0x100, "gpm"),
+};
+
+struct samsung_pin_ctrl s3c2416_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2416_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2416_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2416-GPIO",
+		.type		= S3C24XX,

Ditto.

Quoted 12 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +12 -0
+	},
+};
+
+static struct samsung_pin_bank s3c2440_pin_banks[] = {
+	PIN_BANK_A(25, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+	PIN_BANK_2BIT(11, 0x070, "gph"),

drivers/pinctrl/pinctrl-s3c24xx.c line 637

Quoted 10 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +10 -0
+	PIN_BANK_2BIT(13, 0x0d0, "gpj"),
+};
+
+struct samsung_pin_ctrl s3c2440_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2440_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2440_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2440-GPIO",
+		.type		= S3C24XX,

Ditto.

Quoted 15 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +15 -0
+	},
+};
+
+static struct samsung_pin_bank s3c2450_pin_banks[] = {
+	PIN_BANK_A(28, 0x000, "gpa"),
+	PIN_BANK_2BIT(11, 0x010, "gpb"),
+	PIN_BANK_2BIT(16, 0x020, "gpc"),
+	PIN_BANK_2BIT(16, 0x030, "gpd"),
+	PIN_BANK_2BIT(16, 0x040, "gpe"),
+	PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+	PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+	PIN_BANK_2BIT(15, 0x070, "gph"),
+	PIN_BANK_2BIT(16, 0x0d0, "gpj"),
+	PIN_BANK_2BIT(16, 0x0e0, "gpk"),
+	PIN_BANK_2BIT(15, 0x0f0, "gpl"),

drivers/pinctrl/pinctrl-s3c24xx.c line 662

Quoted 10 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +10 -0
+	PIN_BANK_2BIT(2, 0x100, "gpm"),
+};
+
+struct samsung_pin_ctrl s3c2450_pin_ctrl[] = {
+	{
+		.pin_banks	= s3c2450_pin_banks,
+		.nr_banks	= ARRAY_SIZE(s3c2450_pin_banks),
+		.eint_wkup_init = s3c24xx_eint_init,
+		.label		= "S3C2450-GPIO",
+		.type		= S3C24XX,

Ditto.

Quoted 44 lines
drivers/pinctrl/pinctrl-s3c24xx.c new file +2 -0
+	},
+};
(quoted diff) +0 -0

b/drivers/pinctrl/pinctrl-samsung.c index e836135..234c32f 100644

drivers/pinctrl/pinctrl-samsung.c +10 -0
@@ -977,6 +977,16 @@ static const struct of_device_id
 samsung_pinctrl_dt_match[] = { { .compatible = "samsung,s3c64xx-pinctrl",
 
 		.data = s3c64xx_pin_ctrl },
 
 #endif
 
+#ifdef CONFIG_PINCTRL_S3C24XX
+	{ .compatible = "samsung,s3c2413-pinctrl",
+		.data = s3c2413_pin_ctrl },
+	{ .compatible = "samsung,s3c2416-pinctrl",
+		.data = s3c2416_pin_ctrl },
+	{ .compatible = "samsung,s3c2440-pinctrl",
+		.data = s3c2440_pin_ctrl },
+	{ .compatible = "samsung,s3c2450-pinctrl",
+		.data = s3c2450_pin_ctrl },
+#endif
drivers/pinctrl/pinctrl-samsung.c +0 -0
 	{},
 
 };
 MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
(quoted diff) +0 -0

b/drivers/pinctrl/pinctrl-samsung.h index 7c7f9eb..8bd317c 100644

drivers/pinctrl/pinctrl-samsung.h +4 -0
@@ -81,6 +81,16 @@ enum eint_type {
 
 	EINT_TYPE_WKUP_MUX,
 
 };
 
+/**
+ * enum ctrl_type - variances of a pin controller type
+ * @S3C24XX: generic s3c24xx pin handling
+ * @S3C2412: s3c2412-type eints, existing in the main and eint

controllers + */

drivers/pinctrl/pinctrl-samsung.h enum eint_type { · line 92

Quoted 4 lines
drivers/pinctrl/pinctrl-samsung.h +4 -0
+enum ctrl_type {
+	S3C24XX,
+	S3C2412,
+};

Diito.

Quoted 23 lines
drivers/pinctrl/pinctrl-samsung.h +2 -0
+
 
 /* maximum length of a pin in pin descriptor (example: "gpa0-0") */
 #define PIN_NAME_LENGTH	10
@@ -164,6 +174,7 @@ struct samsung_pin_bank {
 
  * @eint_wkup_init: platform specific callback to setup the external
  wakeup
 
 *	interrupts for the controller.
 
  * @label: for debug information.
 
+ * @type: type of pin-controller
 
  */
 
 struct samsung_pin_ctrl {
 
 	struct samsung_pin_bank	*pin_banks;

drivers/pinctrl/pinctrl-samsung.h struct samsung_pin_ctrl { · line 201

Quoted 6 lines
drivers/pinctrl/pinctrl-samsung.h +1 -0
@@ -185,6 +196,7 @@ struct samsung_pin_ctrl {
 
 	int		(*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
 	int		(*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
 	char		*label;
 
+	enum ctrl_type	type;

Ditto.

Best regards,
--
Tomasz Figa
Samsung Poland R&D Center
SW Solution Development, Kernel and System Framework

Quoted 16 lines
drivers/pinctrl/pinctrl-samsung.h +0 -0
 };

/**

drivers/pinctrl/pinctrl-samsung.h +4 -0
@@ -246,5 +258,9 @@ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 
 extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
 
+extern struct samsung_pin_ctrl s3c2413_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2440_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2450_pin_ctrl[];

#endif /* __PINCTRL_SAMSUNG_H */

#3 lore raw

PATCH v2 1/1 pinctrl: Add pinctrl-s3c24xx driver

Quoted 51 lines · On Thursday 11 of April 2013 11:32:03 Heiko St?bner wrote:

Am Donnerstag, 11. April 2013, 10:54:45 schrieb Tomasz Figa:

Quoted 14 lines

Hi Heiko,

As previously, generally looks good to me, but see my comments inline.

Quoted 9 lines · On Thursday 11 of April 2013 01:16:41 Heiko St?bner wrote:

The s3c24xx pins follow a similar pattern as the other Samsung SoCs and can therefore reuse the already introduced infrastructure.

The s3c24xx SoCs have one design oddity in that the first 4 external interrupts do not reside in the eint pending register but in the main interrupt controller instead. We solve this by forwarding the external interrupt from the main controller into the irq domain of the pin bank. The masking/acking of these interrupts is handled in the same way.

Quoted 7 lines
Quoted 4 lines

Furthermore the S3C2412/2413 SoCs contain another oddity in that they keep the same 4 eints in the main interrupt controller and eintpend register and requiring ack operations to happen in both. To solve this a ctrl_type enum is introduced which can keep the type of controller

Hmm, I think you forgot to edit the commit message, since we decided to replace ctrl_type with another compatible string.

One should not do these things after midnight :-) [true for most of the other mistakes below too].

Quoted 10 lines
Quoted 10 lines

in the samsung_pin_ctrl struct for later retrieval.

The ctrl_type enum contains only S3C24XX and S3C2412 types, as the eint-speciality is currently the only use-case. But it can be expaned if other SoCs gain special handling requirements later on.

---
changes since v1:

Quoted 8 lines
Quoted 5 lines

- address comments from Tomasz Figa:
* split handling functions for eints 0-3 for s3c2412 and all others
* change the handling for s3c2412 eints 0-3 in that they now use

chained_irq_* for the outer parent interrupt

OK, so you finally decided to use the way I suggested. Have you managed to do some testing on a S3C2412?

Nope, after pondering everything a bit more ... your description just sounded more plausible :-) . I only have access to s3c2416 and s3c2450 boards, so everything else is just done according to datasheets and in the hope of it being correct. S3C2412 is really the only familiy member having the 4 eints in both registers.

Quoted 3 lines

Also the (reworked) legacy eint code also uses this scheme ... so at least now both are either correct or wrong. We will only know if someone with a s3c2412 comes along at some point :-) .

That's why I was wondering whether it is possible to get a board with S3C2412 or 13 somewhere. The Logitech controller would be pretty interesting, but is it still possible to get it? (Btw. Is it mach-jive in the kernel?)

Best regards,

Signature · 3 lines
Tomasz Figa
Samsung Poland R&D Center
SW Solution Development, Kernel and System Framework
#4 lore raw

PATCH v2 1/1 pinctrl: Add pinctrl-s3c24xx driver

Am Donnerstag, 11. April 2013, 11:43:19 schrieb Tomasz Figa:

Quoted 54 lines · On Thursday 11 of April 2013 11:32:03 Heiko St?bner wrote:
Quoted 53 lines

Am Donnerstag, 11. April 2013, 10:54:45 schrieb Tomasz Figa:

Quoted 15 lines

Hi Heiko,

As previously, generally looks good to me, but see my comments inline.

Quoted 10 lines · On Thursday 11 of April 2013 01:16:41 Heiko St?bner wrote:

The s3c24xx pins follow a similar pattern as the other Samsung SoCs and can therefore reuse the already introduced infrastructure.

The s3c24xx SoCs have one design oddity in that the first 4 external interrupts do not reside in the eint pending register but in the main interrupt controller instead. We solve this by forwarding the external interrupt from the main controller into the irq domain of the pin bank. The masking/acking of these interrupts is handled in the same way.

Quoted 8 lines
Quoted 5 lines

Furthermore the S3C2412/2413 SoCs contain another oddity in that they keep the same 4 eints in the main interrupt controller and eintpend register and requiring ack operations to happen in both. To solve this a ctrl_type enum is introduced which can keep the type of controller

Hmm, I think you forgot to edit the commit message, since we decided to replace ctrl_type with another compatible string.

One should not do these things after midnight :-) [true for most of the other mistakes below too].

Quoted 10 lines
Quoted 10 lines

in the samsung_pin_ctrl struct for later retrieval.

The ctrl_type enum contains only S3C24XX and S3C2412 types, as the eint-speciality is currently the only use-case. But it can be expaned if other SoCs gain special handling requirements later on.

---
changes since v1:

Quoted 8 lines
Quoted 5 lines

- address comments from Tomasz Figa:
* split handling functions for eints 0-3 for s3c2412 and all others
* change the handling for s3c2412 eints 0-3 in that they now use

chained_irq_* for the outer parent interrupt

OK, so you finally decided to use the way I suggested. Have you managed to do some testing on a S3C2412?

Nope, after pondering everything a bit more ... your description just sounded more plausible :-) . I only have access to s3c2416 and s3c2450 boards, so everything else is just done according to datasheets and in the hope of it being correct. S3C2412 is really the only familiy member having the 4 eints in both registers.

Quoted 8 lines
Quoted 3 lines

Also the (reworked) legacy eint code also uses this scheme ... so at least now both are either correct or wrong. We will only know if someone with a s3c2412 comes along at some point :-) .

That's why I was wondering whether it is possible to get a board with S3C2412 or 13 somewhere. The Logitech controller would be pretty interesting, but is it still possible to get it? (Btw. Is it mach-jive in the kernel?)

The squeezebox controller is still available in some shops, but the prices their asking (>=160 EUR for the controller alone) are in no relation to the age and "power" of the hardware. And yes they're the jive mach.