Skip to contentSkip to conversation

xfstests: make install support common/ and tests/ dirs

PATCH Superseded Wang Sheng-Hui 3 participants 4 messages Apr 11, 2013 – Apr 12, 2013 Kbuild

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 xfstests: make install support common/ and tests/ dirs

xfstests have some change on the organization of the testcases and common* files:
* The common* scripts have been reorganized into the common/ dir.
* The testcases have been reorganized into sub test dirs under tests/.
* The run.* scripts have been removed.

This patch uses the simple way to make install support above changes:
Make up one Makefile for each newly created subdirs, which can control 'make install' separately.

---
 Makefile               | 11 +++++------
 common/Makefile        | 17 +++++++++++++++++
 tests/Makefile         | 23 +++++++++++++++++++++++
 tests/btrfs/Makefile   | 21 +++++++++++++++++++++
 tests/ext4/Makefile    | 21 +++++++++++++++++++++
 tests/generic/Makefile | 21 +++++++++++++++++++++
 tests/shared/Makefile  | 21 +++++++++++++++++++++
 tests/udf/Makefile     | 21 +++++++++++++++++++++
 tests/xfs/Makefile     | 21 +++++++++++++++++++++
 9 files changed, 171 insertions(+), 6 deletions(-)
 create mode 100644 common/Makefile
 create mode 100644 tests/Makefile
 create mode 100644 tests/btrfs/Makefile
 create mode 100644 tests/ext4/Makefile
 create mode 100644 tests/generic/Makefile
 create mode 100644 tests/shared/Makefile
 create mode 100644 tests/udf/Makefile
 create mode 100644 tests/xfs/Makefile
Makefile +5 -6
index 6edd55c..95e3e5d 100644
@@ -52,12 +52,15 @@ LDIRT += $(SRCTAR)
 endif
 
 LIB_SUBDIRS = include lib
-TOOL_SUBDIRS = ltp src m4
+TOOL_SUBDIRS = ltp src m4 common
 ifeq ($(HAVE_DMAPI), true)
 TOOL_SUBDIRS += dmapi
 endif
 
-SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
+# all the tests have been put into tests/
+TESTS_SUBDIR = tests
+
+SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS) $(TESTS_SUBDIR)
 
 default: include/builddefs $(DMAPI_MAKEFILE) $(TESTS)
 ifeq ($(HAVE_BUILDDEFS), no)
@@ -91,12 +94,8 @@ depend: include/builddefs $(addsuffix -depend,$(SUBDIRS))
 install: default $(addsuffix -install,$(SUBDIRS))
 	$(INSTALL) -m 755 -d $(PKG_LIB_DIR)
 	$(INSTALL) -m 755 check $(PKG_LIB_DIR)
-	$(INSTALL) -m 755 [0-9]?? $(PKG_LIB_DIR)
-	$(INSTALL) -m 755 run.* $(PKG_LIB_DIR)
 	$(INSTALL) -m 644 group $(PKG_LIB_DIR)
 	$(INSTALL) -m 644 randomize.awk $(PKG_LIB_DIR)
-	$(INSTALL) -m 644 [0-9]??.* $(PKG_LIB_DIR)
-	$(INSTALL) -m 644 common* $(PKG_LIB_DIR)
 
 # Nothing.
 install-dev install-lib:
common/Makefile new file +17 -0
new file mode 100644
index 0000000..649f55f
@@ -0,0 +1,17 @@
+#
+# Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ..
+include $(TOPDIR)/include/builddefs
+
+# current ../common dir
+COMMON_SUBDIR = common
+
+include $(BUILDRULES)
+
+install:
+	$(INSTALL) -m 755 -d $(PKG_LIB_DIR)/$(COMMON_SUBDIR)
+	$(INSTALL) -m 644 * $(PKG_LIB_DIR)/$(COMMON_SUBDIR)
+
+install-dev install-lib:
tests/Makefile new file +23 -0
new file mode 100644
index 0000000..50e6bb3
@@ -0,0 +1,23 @@
+#
+# Copyright (c) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ..
+include $(TOPDIR)/include/builddefs
+
+# current ../tests dir
+TESTS_SUBDIR = tests
+export TESTS_SUBDIR
+
+TESTS_SUBDIRS = btrfs ext4 generic shared udf xfs
+
+include $(BUILDRULES)
+
+install: $(addsuffix -install,$(TESTS_SUBDIRS))
+	$(INSTALL) -m 755 -d $(PKG_LIB_DIR)/$(TESTS_SUBDIR)
+
+# Nothing.
+install-dev install-lib:
+
+%-install:
+	$(MAKE) $(MAKEOPTS) -C $* install
tests/btrfs/Makefile new file +21 -0
new file mode 100644
index 0000000..35ec6ec
@@ -0,0 +1,21 @@
+#
+# Copyright (c) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ../..
+include $(TOPDIR)/include/builddefs
+
+# ../tests/btrfs dir
+BTRFS_SUBDIR = btrfs
+TARGET_SUBDIR = $(PKG_LIB_DIR)/$(TESTS_SUBDIR)/$(BTRFS_SUBDIR)
+
+include $(BUILDRULES)
+
+install:
+	$(INSTALL) -m 755 -d $(TARGET_SUBDIR)
+	$(INSTALL) -m 755 [0-9]?? $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 group $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 [0-9]??.* $(TARGET_SUBDIR)
+
+# Nothing.
+install-dev install-lib:
tests/ext4/Makefile new file +21 -0
new file mode 100644
index 0000000..94b683b
@@ -0,0 +1,21 @@
+#
+# Copyright (c) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ../..
+include $(TOPDIR)/include/builddefs
+
+# ../tests/ext4 dir
+EXT4_SUBDIR = ext4
+TARGET_SUBDIR = $(PKG_LIB_DIR)/$(TESTS_SUBDIR)/$(EXT4_SUBDIR)
+
+include $(BUILDRULES)
+
+install:
+	$(INSTALL) -m 755 -d $(TARGET_SUBDIR)
+	$(INSTALL) -m 755 [0-9]?? $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 group $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 [0-9]??.* $(TARGET_SUBDIR)
+
+# Nothing.
+install-dev install-lib:
tests/generic/Makefile new file +21 -0
new file mode 100644
index 0000000..4858b1d
@@ -0,0 +1,21 @@
+#
+# Copyright (c) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ../..
+include $(TOPDIR)/include/builddefs
+
+# ../tests/generic dir
+GENERIC_SUBDIR = generic
+TARGET_SUBDIR = $(PKG_LIB_DIR)/$(TESTS_SUBDIR)/$(GENERIC_SUBDIR)
+
+include $(BUILDRULES)
+
+install:
+	$(INSTALL) -m 755 -d $(TARGET_SUBDIR)
+	$(INSTALL) -m 755 [0-9]?? $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 group $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 [0-9]??.* $(TARGET_SUBDIR)
+
+# Nothing.
+install-dev install-lib:
tests/shared/Makefile new file +21 -0
new file mode 100644
index 0000000..d2d980e
@@ -0,0 +1,21 @@
+#
+# Copyright (c) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ../..
+include $(TOPDIR)/include/builddefs
+
+# ../tests/shared dir
+SHARED_SUBDIR = shared
+TARGET_SUBDIR = $(PKG_LIB_DIR)/$(TESTS_SUBDIR)/$(SHARED_SUBDIR)
+
+include $(BUILDRULES)
+
+install:
+	$(INSTALL) -m 755 -d $(TARGET_SUBDIR)
+	$(INSTALL) -m 755 [0-9]?? $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 group $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 [0-9]??.* $(TARGET_SUBDIR)
+
+# Nothing.
+install-dev install-lib:
tests/udf/Makefile new file +21 -0
new file mode 100644
index 0000000..bf01eef
@@ -0,0 +1,21 @@
+#
+# Copyright (c) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ../..
+include $(TOPDIR)/include/builddefs
+
+# ../tests/udf dir
+UDF_SUBDIR = udf
+TARGET_SUBDIR = $(PKG_LIB_DIR)/$(TESTS_SUBDIR)/$(UDF_SUBDIR)
+
+include $(BUILDRULES)
+
+install:
+	$(INSTALL) -m 755 -d $(TARGET_SUBDIR)
+	$(INSTALL) -m 755 [0-9]?? $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 group $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 [0-9]??.* $(TARGET_SUBDIR)
+
+# Nothing.
+install-dev install-lib:
tests/xfs/Makefile new file +21 -0
new file mode 100644
index 0000000..e6d1b32
@@ -0,0 +1,21 @@
+#
+# Copyright (c) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ../..
+include $(TOPDIR)/include/builddefs
+
+# ../tests/xfs dir
+XFS_SUBDIR = xfs
+TARGET_SUBDIR = $(PKG_LIB_DIR)/$(TESTS_SUBDIR)/$(XFS_SUBDIR)
+
+include $(BUILDRULES)
+
+install:
+	$(INSTALL) -m 755 -d $(TARGET_SUBDIR)
+	$(INSTALL) -m 755 [0-9]?? $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 group $(TARGET_SUBDIR)
+	$(INSTALL) -m 644 [0-9]??.* $(TARGET_SUBDIR)
+
+# Nothing.
+install-dev install-lib:
Signature · 6 lines
1.7.12.4

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
#1 lore raw

Wang Sheng-Hui,

The patch to Makefile would not apply. This is what I used to review.

Makefile +5 -7
index 6edd55c..73214ab 100644
@@ -52,12 +52,15 @@ LDIRT += $(SRCTAR)
 endif
 
 LIB_SUBDIRS = include lib
-TOOL_SUBDIRS = ltp src m4
+TOOL_SUBDIRS = ltp src m4 common
 ifeq ($(HAVE_DMAPI), true)
 TOOL_SUBDIRS += dmapi
 endif
 
-SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
+# all the tests have been put into tests/
+TESTS_SUBDIR = tests
+
+SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS) $(TESTS_SUBDIR)
 
 default: include/builddefs $(DMAPI_MAKEFILE) $(TESTS)
 ifeq ($(HAVE_BUILDDEFS), no)
@@ -91,12 +94,7 @@ depend: include/builddefs $(addsuffix -depend,$(SUBDIRS))
 install: default $(addsuffix -install,$(SUBDIRS))
        $(INSTALL) -m 755 -d $(PKG_LIB_DIR)
        $(INSTALL) -m 755 check $(PKG_LIB_DIR)
-       $(INSTALL) -m 755 [0-9]?? $(PKG_LIB_DIR)
-       $(INSTALL) -m 755 run.* $(PKG_LIB_DIR)
-       $(INSTALL) -m 644 group $(PKG_LIB_DIR)
        $(INSTALL) -m 644 randomize.awk $(PKG_LIB_DIR)
-       $(INSTALL) -m 644 [0-9]??.* $(PKG_LIB_DIR)
-       $(INSTALL) -m 644 common* $(PKG_LIB_DIR)
 
 # Nothing.
 install-dev install-lib:

Here is your original:

Quoted 23 lines
Makefile +5 -2
index 6edd55c..95e3e5d 100644
@@ -52,12 +52,15 @@ LDIRT += $(SRCTAR)
  endif
 
  LIB_SUBDIRS = include lib
-TOOL_SUBDIRS = ltp src m4
+TOOL_SUBDIRS = ltp src m4 common
  ifeq ($(HAVE_DMAPI), true)
  TOOL_SUBDIRS += dmapi
  endif
 
-SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
+# all the tests have been put into tests/
+TESTS_SUBDIR = tests
+
+SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS) $(TESTS_SUBDIR)
 
  default: include/builddefs $(DMAPI_MAKEFILE) $(TESTS)
  ifeq ($(HAVE_BUILDDEFS), no)

Makefile depend: include/builddefs $(addsuffix · line 97

Quoted 7 lines
Makefile +0 -3
@@ -91,12 +94,8 @@ depend: include/builddefs $(addsuffix
-depend,$(SUBDIRS))
  install: default $(addsuffix -install,$(SUBDIRS))
      $(INSTALL) -m 755 -d $(PKG_LIB_DIR)
      $(INSTALL) -m 755 check $(PKG_LIB_DIR)
-    $(INSTALL) -m 755 [0-9]?? $(PKG_LIB_DIR)
-    $(INSTALL) -m 755 run.* $(PKG_LIB_DIR)
      $(INSTALL) -m 644 group $(PKG_LIB_DIR)

oops somehow the above line was not deleted

Makefile depend: include/builddefs $(addsuffix

Quoted 6 lines
Makefile +0 -2
      $(INSTALL) -m 644 randomize.awk $(PKG_LIB_DIR)
-    $(INSTALL) -m 644 [0-9]??.* $(PKG_LIB_DIR)
-    $(INSTALL) -m 644 common* $(PKG_LIB_DIR)
 
  # Nothing.
  install-dev install-lib:

The rest of the patch looked good. If you agree with my slight mod then I will put my Reviewed-by and commit it.

Thanks
--Rich

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

#2 lore raw
Quoted 27 lines · Rich Johnston

Wang Sheng-Hui,

The patch to Makefile would not apply. This is what I used to review.

Makefile +5 -2
index 6edd55c..73214ab 100644
@@ -52,12 +52,15 @@ LDIRT += $(SRCTAR)
  endif
 
  LIB_SUBDIRS = include lib
-TOOL_SUBDIRS = ltp src m4
+TOOL_SUBDIRS = ltp src m4 common
  ifeq ($(HAVE_DMAPI), true)
  TOOL_SUBDIRS += dmapi
  endif
 
-SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
+# all the tests have been put into tests/
+TESTS_SUBDIR = tests
+
+SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS) $(TESTS_SUBDIR)
 
  default: include/builddefs $(DMAPI_MAKEFILE) $(TESTS)
  ifeq ($(HAVE_BUILDDEFS), no)

Makefile depend: include/builddefs $(addsuffix -depend,$(SUBDIRS)) · line 96

Quoted 6 lines
Makefile +0 -3
@@ -91,12 +94,7 @@ depend: include/builddefs $(addsuffix -depend,$(SUBDIRS))
  install: default $(addsuffix -install,$(SUBDIRS))
         $(INSTALL) -m 755 -d $(PKG_LIB_DIR)
         $(INSTALL) -m 755 check $(PKG_LIB_DIR)
-       $(INSTALL) -m 755 [0-9]?? $(PKG_LIB_DIR)
-       $(INSTALL) -m 755 run.* $(PKG_LIB_DIR)
-       $(INSTALL) -m 644 group $(PKG_LIB_DIR)

Hi Rich,

This is the different point.
When I scratched the patch against the xfstests( pulled from the git tree, should be the latest, I think), there is one file "group" under the topdir.

.../xfstests$ pwd
.../xfstests
.../xfstests$ ls | grep group
group
.../xfstests$ cat group
# QA groups control file
# Defines test groups and nominal group owners # - do not start group names with a digit
# - comment line before each group is "new" description #

The top "group" file is useless, I think.
Will you please help fixup the patch?

Thanks for your support!

Regards,
Sheng-Hui

Quoted 44 lines
Makefile +0 -2
         $(INSTALL) -m 644 randomize.awk $(PKG_LIB_DIR)
-       $(INSTALL) -m 644 [0-9]??.* $(PKG_LIB_DIR)
-       $(INSTALL) -m 644 common* $(PKG_LIB_DIR)
 
  # Nothing.
  install-dev install-lib:

Here is your original:

Quoted 23 lines
Makefile +5 -2
index 6edd55c..95e3e5d 100644
@@ -52,12 +52,15 @@ LDIRT += $(SRCTAR)
  endif
 
  LIB_SUBDIRS = include lib
-TOOL_SUBDIRS = ltp src m4
+TOOL_SUBDIRS = ltp src m4 common
  ifeq ($(HAVE_DMAPI), true)
  TOOL_SUBDIRS += dmapi
  endif
 
-SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
+# all the tests have been put into tests/
+TESTS_SUBDIR = tests
+
+SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS) $(TESTS_SUBDIR)
 
  default: include/builddefs $(DMAPI_MAKEFILE) $(TESTS)
  ifeq ($(HAVE_BUILDDEFS), no)

Makefile depend: include/builddefs $(addsuffix · line 97

Quoted 7 lines
Makefile +0 -3
@@ -91,12 +94,8 @@ depend: include/builddefs $(addsuffix
-depend,$(SUBDIRS))
  install: default $(addsuffix -install,$(SUBDIRS))
      $(INSTALL) -m 755 -d $(PKG_LIB_DIR)
      $(INSTALL) -m 755 check $(PKG_LIB_DIR)
-    $(INSTALL) -m 755 [0-9]?? $(PKG_LIB_DIR)
-    $(INSTALL) -m 755 run.* $(PKG_LIB_DIR)
      $(INSTALL) -m 644 group $(PKG_LIB_DIR)

oops somehow the above line was not deleted

Quoted 4 lines
Makefile +0 -2
      $(INSTALL) -m 644 randomize.awk $(PKG_LIB_DIR)
-    $(INSTALL) -m 644 [0-9]??.* $(PKG_LIB_DIR)
-    $(INSTALL) -m 644 common* $(PKG_LIB_DIR)
 
Quoted 7 lines

Makefile depend: include/builddefs $(addsuffix -depend,$(SUBDIRS)) · line 100

Quoted 2 lines
Makefile +0 -0
  # Nothing.
  install-dev install-lib:

The rest of the patch looked good. If you agree with my slight mod then I will put my Reviewed-by and commit it.

Thanks
--Rich

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

#3 lore raw
In reply to Wang Sheng-Hui
Quoted 9 lines · Wang Sheng-Hui

xfstests have some change on the organization of the testcases and common* files:
* The common* scripts have been reorganized into the common/ dir.
* The testcases have been reorganized into sub test dirs under tests/.
* The run.* scripts have been removed.

This patch uses the simple way to make install support above changes:
Make up one Makefile for each newly created subdirs, which can control 'make install' separately.

Thanks for doing this!

Comments below.

Quoted 28 lines
---
 Makefile               | 11 +++++------
 common/Makefile        | 17 +++++++++++++++++
 tests/Makefile         | 23 +++++++++++++++++++++++
 tests/btrfs/Makefile   | 21 +++++++++++++++++++++
 tests/ext4/Makefile    | 21 +++++++++++++++++++++
 tests/generic/Makefile | 21 +++++++++++++++++++++
 tests/shared/Makefile  | 21 +++++++++++++++++++++
 tests/udf/Makefile     | 21 +++++++++++++++++++++
 tests/xfs/Makefile     | 21 +++++++++++++++++++++
 9 files changed, 171 insertions(+), 6 deletions(-)
 create mode 100644 common/Makefile
 create mode 100644 tests/Makefile
 create mode 100644 tests/btrfs/Makefile
 create mode 100644 tests/ext4/Makefile
 create mode 100644 tests/generic/Makefile
 create mode 100644 tests/shared/Makefile
 create mode 100644 tests/udf/Makefile
 create mode 100644 tests/xfs/Makefile
Makefile +0 -0
index 6edd55c..95e3e5d 100644
@@ -52,12 +52,15 @@ LDIRT += $(SRCTAR)
 endif
 

Makefile LDIRT += $(SRCTAR) · line 61

Quoted 10 lines
Makefile +3 -2
 LIB_SUBDIRS = include lib
-TOOL_SUBDIRS = ltp src m4
+TOOL_SUBDIRS = ltp src m4 common
 ifeq ($(HAVE_DMAPI), true)
 TOOL_SUBDIRS += dmapi
 endif
 
-SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
+# all the tests have been put into tests/
+TESTS_SUBDIR = tests

No need for the comment - it's redundant....

Quoted 23 lines
Makefile +1 -4
+SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS) $(TESTS_SUBDIR)
 
 default: include/builddefs $(DMAPI_MAKEFILE) $(TESTS)
 ifeq ($(HAVE_BUILDDEFS), no)
@@ -91,12 +94,8 @@ depend: include/builddefs $(addsuffix -depend,$(SUBDIRS))
 install: default $(addsuffix -install,$(SUBDIRS))
 	$(INSTALL) -m 755 -d $(PKG_LIB_DIR)
 	$(INSTALL) -m 755 check $(PKG_LIB_DIR)
-	$(INSTALL) -m 755 [0-9]?? $(PKG_LIB_DIR)
-	$(INSTALL) -m 755 run.* $(PKG_LIB_DIR)
 	$(INSTALL) -m 644 group $(PKG_LIB_DIR)
 	$(INSTALL) -m 644 randomize.awk $(PKG_LIB_DIR)
-	$(INSTALL) -m 644 [0-9]??.* $(PKG_LIB_DIR)
-	$(INSTALL) -m 644 common* $(PKG_LIB_DIR)
 
 # Nothing.
 install-dev install-lib:
common/Makefile new file +0 -0
new file mode 100644
index 0000000..649f55f

common/Makefile line 9

Quoted 9 lines
common/Makefile new file +9 -0
@@ -0,0 +1,17 @@
+#
+# Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ..
+include $(TOPDIR)/include/builddefs
+
+# current ../common dir
+COMMON_SUBDIR = common

Same, the comment is redundant. Also, it's not a subdir, so:

COMMON_DIR = common

The same changes for all the other makefiles, too.

Quoted 14 lines
common/Makefile new file +8 -0
+
+include $(BUILDRULES)
+
+install:
+	$(INSTALL) -m 755 -d $(PKG_LIB_DIR)/$(COMMON_SUBDIR)
+	$(INSTALL) -m 644 * $(PKG_LIB_DIR)/$(COMMON_SUBDIR)
+
+install-dev install-lib:
tests/Makefile new file +0 -0
new file mode 100644
index 0000000..50e6bb3

tests/Makefile line 10

Quoted 10 lines
tests/Makefile new file +10 -0
@@ -0,0 +1,23 @@
+#
+# Copyright (c) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+TOPDIR = ..
+include $(TOPDIR)/include/builddefs
+
+# current ../tests dir
+TESTS_SUBDIR = tests
+export TESTS_SUBDIR

Why export that here? why not in the top level makefile?

tests/Makefile line 12

Quoted 2 lines
tests/Makefile new file +2 -0
+
+TESTS_SUBDIRS = btrfs ext4 generic shared udf xfs

TESTS_SUBDIR/TESTS_SUBDIRS are way too similar. TESTS_DIR and TESTS_SUBDIRS are fine, this I don't think you need to specify

Indeed, because this is just iterating sub directories, something like:

TESTS_SUBDIRS = $(dir $(wildcard $(PKG_LIB_DIR)/$(TESTS_DIR)))

means that we don't need to modify the makefile if we add more directories at a later date. Or if people want to add their own custom test directories...

Otherwise it looks ok.

Cheers,

Dave.

Signature · 7 lines
Dave Chinner
[email protected]

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs