clk: si5351: Add gapless tuning for SI5351 PLL
Subsystems (2)
PATCH 1/1 clk: si5351: Add gapless tuning for SI5351 PLL
For gapless tuning, there is no need for PLL reset and clkout power-down when tuning output. "silabs,gapless-tuning" parameter enables gapless tuning for specific clock output.
--- .../devicetree/bindings/clock/silabs,si5351.txt | 2 ++ drivers/clk/clk-si5351.c | 27 +++++++++++++++++--- 2 files changed, 25 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/clock/silabs,si5351.txt +2 -0
@@ -44,6 +44,8 @@ Optional child node properties: - silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth divider. - silabs,pll-master: boolean, multisynth can change pll frequency. +- silabs,gapless-tuning: boolean, enable gapless (glitch-free) tuning. Depends on + "silabs,multisynth-source" parameter. ==Example==
drivers/clk/clk-si5351.c +23 -4
@@ -54,6 +54,7 @@ struct si5351_hw_data {struct si5351_driver_data *drvdata;struct si5351_parameters params;unsigned char num; +unsigned char gapless_tuning; };struct si5351_driver_data {
@@ -526,8 +527,10 @@ static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate, (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0);/* reset pll */ - val = (hwdata->num ==0 ) ?SI5351_PLL_RESET_A :SI5351_PLL_RESET_B ; -si5351_set_bits (hwdata->drvdata,SI5351_PLL_RESET , val, val); +if (!hwdata->gapless_tuning) { + val = (hwdata->num ==0 ) ?SI5351_PLL_RESET_A :SI5351_PLL_RESET_B ; +si5351_set_bits (hwdata->drvdata,SI5351_PLL_RESET , val, val); + } dev_dbg(&hwdata->drvdata->client->dev, "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
@@ -1064,8 +1067,9 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate, }while (1 );/* powerdown clkout */ -si5351_set_bits (hwdata->drvdata,SI5351_CLK0_CTRL + hwdata->num, -SI5351_CLK_POWERDOWN ,SI5351_CLK_POWERDOWN ); +if (!hwdata->gapless_tuning) +si5351_set_bits (hwdata->drvdata,SI5351_CLK0_CTRL + hwdata->num, +SI5351_CLK_POWERDOWN ,SI5351_CLK_POWERDOWN );/* write output divider */ switch (hwdata->num) {
@@ -1117,6 +1121,7 @@ static void si5351_dt_setup(struct property *prop;const __be32 *p;unsigned int num, val; +int pll =-1 ;if (np ==NULL )return ;
@@ -1167,6 +1172,8 @@ static void si5351_dt_setup(dev_warn (&client->dev,"unable to reparent multisynth %d to %d\n" , num, val); + else + pll = val; }if (!of_property_read_u32 (np,"silabs,clock-source" , &val)) {
@@ -1178,6 +1185,15 @@ static void si5351_dt_setup(if (!of_property_read_u32 (np,"clock-frequency" , &val))clk_set_rate (drvdata->onecell.clks[num], val); + +if (of_property_read_bool (np,"silabs,gapless-tuning" )) { +if (pll >=0 ) { + drvdata->clkout[num].gapless_tuning =1 ; + drvdata->pll[pll].gapless_tuning =1 ; + }else +dev_warn (&client->dev, +"unable to set gapless tuning" ); + } } }
@@ -1294,6 +1310,7 @@ static int si5351_i2c_probe(struct i2c_client *client, drvdata->pll[0 ].num =0 ; drvdata->pll[0 ].drvdata = drvdata; drvdata->pll[0 ].hw.init = &init; + drvdata->pll[0 ].gapless_tuning =0 ;memset (&init,0 ,sizeof (init)); init.name = si5351_pll_names[0 ]; init.ops = &si5351_pll_ops;
@@ -1310,6 +1327,7 @@ static int si5351_i2c_probe(struct i2c_client *client, drvdata->pll[1 ].num =1 ; drvdata->pll[1 ].drvdata = drvdata; drvdata->pll[1 ].hw.init = &init; + drvdata->pll[1 ].gapless_tuning =0 ;memset (&init,0 ,sizeof (init));if (drvdata->variant ==SI5351_VARIANT_B ) { init.name = si5351_pll_names[2 ];
@@ -1380,6 +1398,7 @@ static int si5351_i2c_probe(struct i2c_client *client, drvdata->clkout[n].num = n; drvdata->clkout[n].drvdata = drvdata; drvdata->clkout[n].hw.init = &init; + drvdata->clkout[n].gapless_tuning =0 ;memset (&init,0 ,sizeof (init)); init.name = si5351_clkout_names[n]; init.ops = &si5351_clkout_ops;
Signature · 1 line
1.7.9.5
Quoted 3 lines · Michal Bachraty
For gapless tuning, there is no need for PLL reset and clkout power-down when tuning output. "silabs,gapless-tuning" parameter enables gapless tuning for specific clock output.
Michal,
does gapless tuning have any constraints? Can we use it for all rate changes or determine the
need for pll reset by rate offset?
Sebastian
Hi Sebastian,
Quoted 3 lines
does gapless tuning have any constraints? Can we use it for all rate changes or determine the
need for pll reset by rate offset?
Today I made some test measurements ( switching from 22.5MHz to 32kHz, then to 50MHz, then to 1MHz) with good results: without any gaps and any side frequences. So there are no constrains, and we can use it for any frequences.
Best,
Michal
Quoting Michal Bachraty (2013-04-09 01:26:15)
Quoted 5 lines
For gapless tuning, there is no need for PLL reset and clkout power-down when tuning output. "silabs,gapless-tuning" parameter enables gapless tuning for specific clock output.
Signed-off-by Michal Bachraty <[email protected]>
Hi Michal,
This did not apply cleanly on the latest (v8) si5351 clk driver. Can you refresh it? I do not plan on taking any more patches for 3.10 after 3.9-rc7 drops (likely on Sunday or Monday). So this patch may need to wait until after the merge window.
Regards,
Mike
Quoted 114 lines
--- .../devicetree/bindings/clock/silabs,si5351.txt | 2 ++ drivers/clk/clk-si5351.c | 27 +++++++++++++++++--- 2 files changed, 25 insertions(+), 4 deletions(-)Documentation/devicetree/bindings/clock/silabs,si5351.txt +2
-0@@ -44,6 +44,8 @@ Optional child node properties: - silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth divider. - silabs,pll-master: boolean, multisynth can change pll frequency. +- silabs,gapless-tuning: boolean, enable gapless (glitch-free) tuning. Depends on + "silabs,multisynth-source" parameter. ==Example==drivers/clk/clk-si5351.c +23
-4@@ -54,6 +54,7 @@ struct si5351_hw_data {struct si5351_driver_data *drvdata;struct si5351_parameters params;unsigned char num; +unsigned char gapless_tuning; };struct si5351_driver_data {@@ -526,8 +527,10 @@ static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate, (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0);/* reset pll */ - val = (hwdata->num ==0 ) ?SI5351_PLL_RESET_A :SI5351_PLL_RESET_B ; -si5351_set_bits (hwdata->drvdata,SI5351_PLL_RESET , val, val); +if (!hwdata->gapless_tuning) { + val = (hwdata->num ==0 ) ?SI5351_PLL_RESET_A :SI5351_PLL_RESET_B ; +si5351_set_bits (hwdata->drvdata,SI5351_PLL_RESET , val, val); + } dev_dbg(&hwdata->drvdata->client->dev, "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",@@ -1064,8 +1067,9 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate, }while (1 );/* powerdown clkout */ -si5351_set_bits (hwdata->drvdata,SI5351_CLK0_CTRL + hwdata->num, -SI5351_CLK_POWERDOWN ,SI5351_CLK_POWERDOWN ); +if (!hwdata->gapless_tuning) +si5351_set_bits (hwdata->drvdata,SI5351_CLK0_CTRL + hwdata->num, +SI5351_CLK_POWERDOWN ,SI5351_CLK_POWERDOWN );/* write output divider */ switch (hwdata->num) {@@ -1117,6 +1121,7 @@ static void si5351_dt_setup(struct property *prop;const __be32 *p;unsigned int num, val; +int pll =-1 ;if (np ==NULL )return ;@@ -1167,6 +1172,8 @@ static void si5351_dt_setup(dev_warn (&client->dev,"unable to reparent multisynth %d to %d\n" , num, val); + else + pll = val; }if (!of_property_read_u32 (np,"silabs,clock-source" , &val)) {@@ -1178,6 +1185,15 @@ static void si5351_dt_setup(if (!of_property_read_u32 (np,"clock-frequency" , &val))clk_set_rate (drvdata->onecell.clks[num], val); + +if (of_property_read_bool (np,"silabs,gapless-tuning" )) { +if (pll >=0 ) { + drvdata->clkout[num].gapless_tuning =1 ; + drvdata->pll[pll].gapless_tuning =1 ; + }else +dev_warn (&client->dev, +"unable to set gapless tuning" ); + } } }@@ -1294,6 +1310,7 @@ static int si5351_i2c_probe(struct i2c_client *client, drvdata->pll[0 ].num =0 ; drvdata->pll[0 ].drvdata = drvdata; drvdata->pll[0 ].hw.init = &init; + drvdata->pll[0 ].gapless_tuning =0 ;memset (&init,0 ,sizeof (init)); init.name = si5351_pll_names[0 ]; init.ops = &si5351_pll_ops;@@ -1310,6 +1327,7 @@ static int si5351_i2c_probe(struct i2c_client *client, drvdata->pll[1 ].num =1 ; drvdata->pll[1 ].drvdata = drvdata; drvdata->pll[1 ].hw.init = &init; + drvdata->pll[1 ].gapless_tuning =0 ;memset (&init,0 ,sizeof (init));if (drvdata->variant ==SI5351_VARIANT_B ) { init.name = si5351_pll_names[2 ];@@ -1380,6 +1398,7 @@ static int si5351_i2c_probe(struct i2c_client *client, drvdata->clkout[n].num = n; drvdata->clkout[n].drvdata = drvdata; drvdata->clkout[n].hw.init = &init; + drvdata->clkout[n].gapless_tuning =0 ;memset (&init,0 ,sizeof (init)); init.name = si5351_clkout_names[n]; init.ops = &si5351_clkout_ops;Signature · 1 line
1.7.9.5
Quoted 5 lines · Mike Turquette
Quoting Michal Bachraty (2013-04-09 01:26:15)
Quoted 4 lines
For gapless tuning, there is no need for PLL reset and clkout power-down when tuning output. "silabs,gapless-tuning" parameter enables gapless tuning for specific clock output.
Quoted 8 lines
Quoted 1 line
Signed-off-by Michal Bachraty<[email protected]>Hi Michal,
This did not apply cleanly on the latest (v8) si5351 clk driver. Can you refresh it? I do not plan on taking any more patches for 3.10 after 3.9-rc7 drops (likely on Sunday or Monday). So this patch may need to wait until after the merge window.
Mike,
I have integrated the above function into clk-si5351 during development (see clk-si5351 changelog from v6->v7). I think we can drop this patch, as Michal added his Tested-by to clk-si5351.
Regards,
Sebastian
PATCH 1/1 clk: si5351: Add gapless tuning for SI5351 PLL
Quoting Sebastian Hesselbarth (2013-04-12 12:24:16)
Quoted 15 lines · Mike Turquette
Quoted 5 lines
Quoting Michal Bachraty (2013-04-09 01:26:15)
Quoted 4 lines
For gapless tuning, there is no need for PLL reset and clkout power-down when tuning output. "silabs,gapless-tuning" parameter enables gapless tuning for specific clock output.
Quoted 8 lines
Quoted 1 line
Signed-off-by Michal Bachraty<[email protected]>Hi Michal,
This did not apply cleanly on the latest (v8) si5351 clk driver. Can you refresh it? I do not plan on taking any more patches for 3.10 after 3.9-rc7 drops (likely on Sunday or Monday). So this patch may need to wait until after the merge window.
Quoted 6 lines
Mike,
I have integrated the above function into clk-si5351 during development (see clk-si5351 changelog from
v6->v7). I think we can drop this patch, as Michal added his Tested-by to clk-si5351.
Great.
Thanks,
Mike
Quoted 2 lines
Regards,
Sebastian