ARM: imx27: Add PWM0 to device tree
Subsystems (2)
PATCH v2 1/1 ARM: imx27: Add PWM0 to device tree
Signed-off-by Gwenhael Goavec-Merou <[email protected]>
---
v2:
- Suppress status, now PWM is always enabled;
- Suppress platform patch.
arch/arm/boot/dts/imx27.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/imx27.dtsi +8 -0
@@ -89,6 +89,14 @@ clock-names = "ipg", "per"; }; + pwm0: pwm at 10006000 { + compatible = "fsl,imx27-pwm"; + reg = <0x10006000 0x1000>; + interrupts = <23>; + clocks = <&clks 34>, <&clks 61>; + clock-names = "ipg", "per"; + }; + uart1: serial at 1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>;
Signature · 1 line
1.8.1.5
Sascha Hauer
maintainerPATCH v2 1/1 ARM: imx27: Add PWM0 to device tree
Quoted 2 lines · Gwenhael Goavec-Merou
Signed-off-by Gwenhael Goavec-Merou <[email protected]>
Acked-by Sascha Hauer <[email protected]>
Sascha
Quoted 31 lines
---
v2:
- Suppress status, now PWM is always enabled;
- Suppress platform patch.arch/arm/boot/dts/imx27.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)arch/arm/boot/dts/imx27.dtsi +8
-0@@ -89,6 +89,14 @@ clock-names = "ipg", "per"; }; + pwm0: pwm at 10006000 { + compatible = "fsl,imx27-pwm"; + reg = <0x10006000 0x1000>; + interrupts = <23>; + clocks = <&clks 34>, <&clks 61>; + clock-names = "ipg", "per"; + }; + uart1: serial at 1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>;Signature · 1 line
1.8.1.5
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Shawn Guo
AppliedPATCH v2 1/1 ARM: imx27: Add PWM0 to device tree
In reply to Gwenhael Goavec-MerouQuoted 2 lines · Gwenhael Goavec-Merou
Signed-off-by Gwenhael Goavec-Merou <[email protected]>
Applied, thanks.
Quoted 30 lines
---
v2:
- Suppress status, now PWM is always enabled;
- Suppress platform patch.arch/arm/boot/dts/imx27.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)arch/arm/boot/dts/imx27.dtsi +8
-0@@ -89,6 +89,14 @@ clock-names = "ipg", "per"; }; + pwm0: pwm at 10006000 { + compatible = "fsl,imx27-pwm"; + reg = <0x10006000 0x1000>; + interrupts = <23>; + clocks = <&clks 34>, <&clks 61>; + clock-names = "ipg", "per"; + }; + uart1: serial at 1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>;Signature · 1 line
1.8.1.5