ARM: ux500: DT: Rename root node "soc-u9500" into "soc-ux500"
PATCH 1/1 ARM: ux500: DT: Rename root node "soc-u9500" into "soc-ux500"
From: Gabriel Fernandez <[email protected]>
This root node is used in the whole family of chips, the a9500 is just one particular instance.
--- arch/arm/boot/dts/ccu9540.dts | 2 +- arch/arm/boot/dts/dbx5x0.dtsi | 2 +- arch/arm/boot/dts/href.dtsi | 2 +- arch/arm/boot/dts/hrefprev60.dts | 2 +- arch/arm/boot/dts/hrefv60plus.dts | 2 +- arch/arm/boot/dts/snowball.dts | 2 +- arch/arm/boot/dts/stuib.dtsi | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-)
arch/arm/boot/dts/ccu9540.dts +1 -1
@@ -20,7 +20,7 @@ reg = <0x00000000 0x20000000>; }; - soc-u9500 { + soc-ux500 { uart at 80120000 { status = "okay"; };
arch/arm/boot/dts/dbx5x0.dtsi +1 -1
@@ -12,7 +12,7 @@ /include/ "skeleton.dtsi" / { - soc-u9500 { + soc-ux500 { #address-cells = <1>; #size-cells = <1>; compatible = "stericsson,db8500";
arch/arm/boot/dts/href.dtsi +1 -1
@@ -27,7 +27,7 @@ }; }; - soc-u9500 { + soc-ux500 { uart at 80120000 { status = "okay"; };
arch/arm/boot/dts/hrefprev60.dts +1 -1
@@ -24,7 +24,7 @@ }; }; - soc-u9500 { + soc-ux500 { prcmu at 80157000 { ab8500 at 5 { ab8500-gpio {
arch/arm/boot/dts/hrefv60plus.dts +1 -1
@@ -24,7 +24,7 @@ }; }; - soc-u9500 { + soc-ux500 { i2c at 80110000 { bu21013_tp at 0x5c { reset-gpio = <&gpio4 15 0x4>;
arch/arm/boot/dts/snowball.dts +1 -1
@@ -82,7 +82,7 @@ }; }; - soc-u9500 { + soc-ux500 { sound { compatible = "stericsson,snd-soc-mop500";
arch/arm/boot/dts/stuib.dtsi +1 -1
@@ -10,7 +10,7 @@ */ / { - soc-u9500 { + soc-ux500 { i2c at 80004000 { stmpe1601: stmpe1601 at 40 { compatible = "st,stmpe1601";
Signature · 1 line
1.7.11.3
PATCH 1/1 ARM: ux500: DT: Rename root node "soc-u9500" into "soc-ux500"
Quoted 9 lines · Linus Walleij
From: Gabriel Fernandez <[email protected]>
This root node is used in the whole family of chips, the a9500 is just one particular instance.
Cc Lee Jones <[email protected]>Signed-off-by Gabriel Fernandez <[email protected]>Reviewed-by Philippe Langlais <[email protected]>Signed-off-by Linus Walleij <[email protected]>
Looks good to me:
Quoted 100 lines
arch/arm/boot/dts/ccu9540.dts | 2 +- arch/arm/boot/dts/dbx5x0.dtsi | 2 +- arch/arm/boot/dts/href.dtsi | 2 +- arch/arm/boot/dts/hrefprev60.dts | 2 +- arch/arm/boot/dts/hrefv60plus.dts | 2 +- arch/arm/boot/dts/snowball.dts | 2 +- arch/arm/boot/dts/stuib.dtsi | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-)arch/arm/boot/dts/ccu9540.dts +1
-1@@ -20,7 +20,7 @@ reg = <0x00000000 0x20000000>; }; - soc-u9500 { + soc-ux500 { uart at 80120000 { status = "okay"; };arch/arm/boot/dts/dbx5x0.dtsi +1
-1@@ -12,7 +12,7 @@ /include/ "skeleton.dtsi" / { - soc-u9500 { + soc-ux500 { #address-cells = <1>; #size-cells = <1>; compatible = "stericsson,db8500";arch/arm/boot/dts/href.dtsi +1
-1@@ -27,7 +27,7 @@ }; }; - soc-u9500 { + soc-ux500 { uart at 80120000 { status = "okay"; };arch/arm/boot/dts/hrefprev60.dts +1
-1@@ -24,7 +24,7 @@ }; }; - soc-u9500 { + soc-ux500 { prcmu at 80157000 { ab8500 at 5 { ab8500-gpio {arch/arm/boot/dts/hrefv60plus.dts +1
-1@@ -24,7 +24,7 @@ }; }; - soc-u9500 { + soc-ux500 { i2c at 80110000 { bu21013_tp at 0x5c { reset-gpio = <&gpio4 15 0x4>;arch/arm/boot/dts/snowball.dts +1
-1@@ -82,7 +82,7 @@ }; }; - soc-u9500 { + soc-ux500 { sound { compatible = "stericsson,snd-soc-mop500";arch/arm/boot/dts/stuib.dtsi +1
-1@@ -10,7 +10,7 @@ */ / { - soc-u9500 { + soc-ux500 { i2c at 80004000 { stmpe1601: stmpe1601 at 40 { compatible = "st,stmpe1601";
Signature · 4 lines
Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
PATCH 1/1 ARM: ux500: DT: Rename root node "soc-u9500" into "soc-ux500"
In reply to Linus Walleijarch/arm/boot/dts/ccu9540.dts line 23
Quoted 9 lines · Linus Walleij
From: Gabriel Fernandez <[email protected]>
This root node is used in the whole family of chips, the a9500 is just one particular instance.
arch/arm/boot/dts/ccu9540.dts +1
-1- soc-u9500 { + soc-ux500 {
Shouldn't this just be "soc" then; nodes are usually named based on type of object rather than identity.