Shutdown from reboot_cpuid without stopping other cpus.
Subsystems (2)
cover Shutdown from reboot_cpuid without stopping other cpus.
We recently noticed that reboot of a 1024 cpu machine takes approx 16 minutes of just stopping the cpus. The slowdown was tracked to commit f96972f.
The current implementation does all the work of hot removing the cpus before halting the system. We are switching to just migrating to the reboot_cpuid and then continuing with shutdown/reboot.
The patch set is broken into four parts. The first is planned for the stable release. The others move the halt/shutdown/reboot related files to their own kernel/reboot.c file and then introduce the kernel boot parameter.
PATCH 1/4 Migrate shutdown/reboot to boot cpu.
We recently noticed that reboot of a 1024 cpu machine takes approx 16 minutes of just stopping the cpus. The slowdown was tracked to commit f96972f.
The current implementation does all the work of hot removing the cpus before halting the system. We are switching to just migrating to the boot cpu and then continuing with shutdown/reboot.
This also has the effect of not breaking x86's command line parameter for specifying the reboot cpu. Note, this code was shamelessly copied from arch/x86/kernel/reboot.c with bits removed pertaining to the reboot_cpu command line parameter.
To: Shawn Guo <[email protected]>
To: Ingo Molnar <[email protected]>
To: Russ Anderson <[email protected]>
To: Oleg Nesterov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux Kernel Mailing List <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: the arch/x86 maintainers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: <[email protected]>
---
Changes since -v1.
- Set PF_THREAD_BOUND before migrating to eliminate potential race.
- Modified kernel_power_off to also migrate instead of using disable_nonboot_cpus().
--- kernel/sys.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
kernel/sys.c +19 -3
@@ -357,6 +357,22 @@ int unregister_reboot_notifier(struct notifier_block *nb) }EXPORT_SYMBOL (unregister_reboot_notifier); +void migrate_to_reboot_cpu (void ) +{ +/* The boot cpu is always logical cpu 0 */ +int reboot_cpu_id =0 ; + +/* Make certain the cpu I'm about to reboot on is online */ +if (!cpu_online (reboot_cpu_id)) + reboot_cpu_id =smp_processor_id (); + +/* Prevent races with other tasks migrating this task. */ + current->flags |=PF_THREAD_BOUND ; + +/* Make certain I only run on the appropriate processor */ +set_cpus_allowed_ptr (current,cpumask_of (reboot_cpu_id)); +} +/** * kernel_restart - reboot the system * @cmd: pointer to buffer containing command to execute for restart
@@ -368,7 +384,7 @@ EXPORT_SYMBOL(unregister_reboot_notifier);void kernel_restart (char *cmd) {kernel_restart_prepare (cmd); -disable_nonboot_cpus (); +migrate_to_reboot_cpu ();syscore_shutdown ();if (!cmd)printk (KERN_EMERG "Restarting system.\n" );
@@ -395,7 +411,7 @@ static void kernel_shutdown_prepare(enum system_states state)void kernel_halt (void ) {kernel_shutdown_prepare (SYSTEM_HALT ); -disable_nonboot_cpus (); +migrate_to_reboot_cpu ();syscore_shutdown ();printk (KERN_EMERG "System halted.\n" );kmsg_dump (KMSG_DUMP_HALT );
@@ -414,7 +430,7 @@ void kernel_power_off(void)kernel_shutdown_prepare (SYSTEM_POWER_OFF );if (pm_power_off_prepare)pm_power_off_prepare (); -disable_nonboot_cpus (); +migrate_to_reboot_cpu ();syscore_shutdown ();printk (KERN_EMERG "Power down.\n" );kmsg_dump (KMSG_DUMP_POWEROFF );
Signature · 1 line
1.8.1.2
Re: [Patch -v3 1/4] Migrate shutdown/reboot to boot cpu.
Quoted 8 lines · Robin Holt
We recently noticed that reboot of a 1024 cpu machine takes approx 16 minutes of just stopping the cpus. The slowdown was tracked to commit f96972f.
The current implementation does all the work of hot removing the cpus before halting the system. We are switching to just migrating to the boot cpu and then continuing with shutdown/reboot.
Quoted 7 lines
This also has the effect of not breaking x86's command line parameter for specifying the reboot cpu. Note, this code was shamelessly copied from
arch/x86/kernel/reboot.cwith bits removed pertaining to thereboot_cpucommand line parameter.Signed-off-by Robin Holt <[email protected]>To: Shawn Guo <[email protected]>
It works on my hardware - i.MX6 Quad.
PATCH 2/4 Move shutdown/reboot related functions to kernel/reboot.c
In reply to Robin HoltThis patch is preparatory. It moves reboot related syscall, etc functions from kernel/sys.c to kernel/reboot.c.
To: Ingo Molnar <[email protected]>
To: Russ Anderson <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux Kernel Mailing List <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: the arch/x86 maintainers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
--- kernel/Makefile | 2 +- kernel/reboot.c | 328 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ kernel/sys.c | 315 ----------------------------------------------------- 3 files changed, 329 insertions(+), 316 deletions(-) create mode 100644 kernel/reboot.c
kernel/Makefile +1 -1
@@ -9,7 +9,7 @@ obj-y = fork.o exec_domain.o panic.o printk.o \ rcupdate.o extable.o params.o posix-timers.o \ kthread.o wait.o sys_ni.o posix-cpu-timers.o mutex.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ - notifier.o ksysfs.o cred.o \ + notifier.o ksysfs.o cred.o reboot.o \ async.o range.o groups.o lglock.o smpboot.o ifdef CONFIG_FUNCTION_TRACER
kernel/reboot.c new file +328 -0
328 lines not on this page · raw message
kernel/sys.c +0 -315
324 lines not on this page · raw message
Signature · 1 line
1.8.1.2
Re: [Patch -v3 2/4] Move shutdown/reboot related functions to kernel/reboot.c
Quoted 2 lines · Robin Holt
This patch is preparatory. It moves reboot related syscall, etc functions from
kernel/sys.ctokernel/reboot.c.
[]
kernel/reboot.c
Quoted 1 line
kernel/reboot.c +0
-0
[]
kernel/reboot.c line 238
Quoted 5 lines
kernel/reboot.c +5
-0+#ifdef CONFIG_HIBERNATION +case LINUX_REBOOT_CMD_SW_SUSPEND : + ret =hibernate (); +break ; +#endif
Doesn't compile. needs suspend.h
PATCH 3/4 checkpatch.pl the new kernel/reboot.c file.
In reply to Robin HoltI did allow the remaining 81 character line behind. It did not seem like it was worth changing. Otherwise, it now passes checkpatch.pl.
To: Ingo Molnar <[email protected]>
To: Russ Anderson <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux Kernel Mailing List <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: the arch/x86 maintainers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
--- kernel/reboot.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-)
kernel/reboot.c +10 -12
@@ -96,9 +96,9 @@ void kernel_restart(char *cmd)migrate_to_reboot_cpu ();syscore_shutdown ();if (!cmd) -printk (KERN_EMERG "Restarting system.\n" ); +pr_emerg ("Restarting system.\n" );else -printk (KERN_EMERG "Restarting system with command '%s'.\n" , cmd); +pr_emerg ("Restarting system with command '%s'.\n" , cmd);kmsg_dump (KMSG_DUMP_RESTART );machine_restart (cmd); }
@@ -107,7 +107,7 @@ EXPORT_SYMBOL_GPL(kernel_restart);static void kernel_shutdown_prepare (enum system_states state) {blocking_notifier_call_chain (&reboot_notifier_list, - (state ==SYSTEM_HALT )?SYS_HALT :SYS_POWER_OFF ,NULL ); + (state ==SYSTEM_HALT ) ?SYS_HALT :SYS_POWER_OFF ,NULL ); system_state = state;usermodehelper_disable ();device_shutdown ();
@@ -122,11 +122,10 @@ void kernel_halt(void)kernel_shutdown_prepare (SYSTEM_HALT );migrate_to_reboot_cpu ();syscore_shutdown (); -printk (KERN_EMERG "System halted.\n" ); +pr_emerg ("System halted.\n" );kmsg_dump (KMSG_DUMP_HALT );machine_halt (); } -EXPORT_SYMBOL_GPL (kernel_halt);/**
@@ -141,7 +140,7 @@ void kernel_power_off(void)pm_power_off_prepare ();migrate_to_reboot_cpu ();syscore_shutdown (); -printk (KERN_EMERG "Power down.\n" ); +pr_emerg ("Power down.\n" );kmsg_dump (KMSG_DUMP_POWEROFF );machine_power_off (); }
@@ -170,10 +169,10 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,/* For safety, we require "magic" arguments. */ if (magic1 !=LINUX_REBOOT_MAGIC1 || - (magic2 !=LINUX_REBOOT_MAGIC2 && - magic2 !=LINUX_REBOOT_MAGIC2A && + (magic2 !=LINUX_REBOOT_MAGIC2 && + magic2 !=LINUX_REBOOT_MAGIC2A && magic2 !=LINUX_REBOOT_MAGIC2B && - magic2 !=LINUX_REBOOT_MAGIC2C )) + magic2 !=LINUX_REBOOT_MAGIC2C ))return -EINVAL ;/*
@@ -282,14 +281,13 @@ static int __orderly_poweroff(bool force) ret =call_usermodehelper (argv[0 ], argv, envp,UMH_WAIT_EXEC );argv_free (argv); }else { -printk (KERN_WARNING "%s failed to allocate memory for \"%s\"\n" , +pr_warn ("%s failed to allocate memory for \"%s\"\n" , __func__, poweroff_cmd); ret = -ENOMEM ; }if (ret && force) { -printk (KERN_WARNING "Failed to start orderly shutdown: " -"forcing the issue\n" ); +pr_warn ("Failed to start orderly shutdown: forcing the issue\n" );/* * I guess this should try to kick off some daemon to sync and * poweroff asap. Or not even bother syncing if we're doing an
Signature · 1 line
1.8.1.2
Re: [Patch -v3 3/4] checkpatch.pl the new kernel/reboot.c file.
Quoted 2 lines · Robin Holt
I did allow the remaining 81 character line behind. It did not seem like it was worth changing. Otherwise, it now passes checkpatch.pl.
trivia:
I'd make these changes on top of your patch:
o Additional OOM messages aren't necessary as a dump_stack is done
o Add pr_fmt to prefix logging messages with "reboot: "
o Remove periods from logging messages
o Argument alignment
o Rename file prefix to "reboot.c"
o Add #include <linux/suspend.h> so it compiles
--- kernel/reboot.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-)
kernel/reboot.c +14 -12
@@ -1,14 +1,17 @@/* -* linux/kernel/sys.c +* linux/kernel/reboot.c * * Copyright (C) 2013 Linus Torvalds */ +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#include <linux/export.h> #include <linux/kexec.h> #include <linux/kmod.h> #include <linux/kmsg_dump.h> #include <linux/reboot.h> +#include <linux/suspend.h> #include <linux/syscalls.h> #include <linux/syscore_ops.h>
@@ -96,9 +99,9 @@ void kernel_restart(char *cmd)migrate_to_reboot_cpu ();syscore_shutdown ();if (!cmd) -pr_emerg ("Restarting system.\n" ); +pr_emerg ("Restarting system\n" );else -pr_emerg ("Restarting system with command '%s'.\n" , cmd); +pr_emerg ("Restarting system with command '%s'\n" , cmd);kmsg_dump (KMSG_DUMP_RESTART );machine_restart (cmd); }
@@ -107,7 +110,8 @@ EXPORT_SYMBOL_GPL(kernel_restart);static void kernel_shutdown_prepare (enum system_states state) {blocking_notifier_call_chain (&reboot_notifier_list, - (state ==SYSTEM_HALT ) ?SYS_HALT :SYS_POWER_OFF ,NULL ); + state ==SYSTEM_HALT ?SYS_HALT :SYS_POWER_OFF , +NULL ); system_state = state;usermodehelper_disable ();device_shutdown ();
@@ -122,7 +126,7 @@ void kernel_halt(void)kernel_shutdown_prepare (SYSTEM_HALT );migrate_to_reboot_cpu ();syscore_shutdown (); -pr_emerg ("System halted.\n" ); +pr_emerg ("System halted\n" );kmsg_dump (KMSG_DUMP_HALT );machine_halt (); }
@@ -140,7 +144,7 @@ void kernel_power_off(void)pm_power_off_prepare ();migrate_to_reboot_cpu ();syscore_shutdown (); -pr_emerg ("Power down.\n" ); +pr_emerg ("Power down\n" );kmsg_dump (KMSG_DUMP_POWEROFF );machine_power_off (); }
@@ -169,10 +173,10 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,/* For safety, we require "magic" arguments. */ if (magic1 !=LINUX_REBOOT_MAGIC1 || - (magic2 !=LINUX_REBOOT_MAGIC2 && - magic2 !=LINUX_REBOOT_MAGIC2A && - magic2 !=LINUX_REBOOT_MAGIC2B && - magic2 !=LINUX_REBOOT_MAGIC2C )) + (magic2 !=LINUX_REBOOT_MAGIC2 && + magic2 !=LINUX_REBOOT_MAGIC2A && + magic2 !=LINUX_REBOOT_MAGIC2B && + magic2 !=LINUX_REBOOT_MAGIC2C ))return -EINVAL ;/*
@@ -281,8 +285,6 @@ static int __orderly_poweroff(bool force) ret =call_usermodehelper (argv[0 ], argv, envp,UMH_WAIT_EXEC );argv_free (argv); }else { -pr_warn ("%s failed to allocate memory for \"%s\"\n" , - __func__, poweroff_cmd); ret = -ENOMEM ; }
Re: [Patch -v3 3/4] checkpatch.pl the new kernel/reboot.c file.
Quoted 6 lines · Joe Perches
Quoted 2 lines · Robin Holt
I did allow the remaining 81 character line behind. It did not seem like it was worth changing. Otherwise, it now passes checkpatch.pl.
trivia:
Quoted 8 lines
I'd make these changes on top of your patch:
o Additional OOM messages aren't necessary as a
dump_stackis done
o Addpr_fmtto prefix logging messages with "reboot: "
o Remove periods from logging messages
o Argument alignment
o Rename file prefix to "reboot.c"
o Add #include <linux/suspend.h> so it compiles
I added linux/suspend.h and also turned on HIBERNATE in my .config file.
Robin
Quoted 93 lines
--- kernel/reboot.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-)kernel/reboot.c +14
-12@@ -1,14 +1,17 @@/* -* linux/kernel/sys.c +* linux/kernel/reboot.c * * Copyright (C) 2013 Linus Torvalds */ +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#include <linux/export.h> #include <linux/kexec.h> #include <linux/kmod.h> #include <linux/kmsg_dump.h> #include <linux/reboot.h> +#include <linux/suspend.h> #include <linux/syscalls.h> #include <linux/syscore_ops.h> @@ -96,9 +99,9 @@ void kernel_restart(char *cmd)migrate_to_reboot_cpu ();syscore_shutdown ();if (!cmd) -pr_emerg ("Restarting system.\n" ); +pr_emerg ("Restarting system\n" );else -pr_emerg ("Restarting system with command '%s'.\n" , cmd); +pr_emerg ("Restarting system with command '%s'\n" , cmd);kmsg_dump (KMSG_DUMP_RESTART );machine_restart (cmd); }@@ -107,7 +110,8 @@ EXPORT_SYMBOL_GPL(kernel_restart);static void kernel_shutdown_prepare (enum system_states state) {blocking_notifier_call_chain (&reboot_notifier_list, - (state ==SYSTEM_HALT ) ?SYS_HALT :SYS_POWER_OFF ,NULL ); + state ==SYSTEM_HALT ?SYS_HALT :SYS_POWER_OFF , +NULL ); system_state = state;usermodehelper_disable ();device_shutdown ();@@ -122,7 +126,7 @@ void kernel_halt(void)kernel_shutdown_prepare (SYSTEM_HALT );migrate_to_reboot_cpu ();syscore_shutdown (); -pr_emerg ("System halted.\n" ); +pr_emerg ("System halted\n" );kmsg_dump (KMSG_DUMP_HALT );machine_halt (); }@@ -140,7 +144,7 @@ void kernel_power_off(void)pm_power_off_prepare ();migrate_to_reboot_cpu ();syscore_shutdown (); -pr_emerg ("Power down.\n" ); +pr_emerg ("Power down\n" );kmsg_dump (KMSG_DUMP_POWEROFF );machine_power_off (); }@@ -169,10 +173,10 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,/* For safety, we require "magic" arguments. */ if (magic1 !=LINUX_REBOOT_MAGIC1 || - (magic2 !=LINUX_REBOOT_MAGIC2 && - magic2 !=LINUX_REBOOT_MAGIC2A && - magic2 !=LINUX_REBOOT_MAGIC2B && - magic2 !=LINUX_REBOOT_MAGIC2C )) + (magic2 !=LINUX_REBOOT_MAGIC2 && + magic2 !=LINUX_REBOOT_MAGIC2A && + magic2 !=LINUX_REBOOT_MAGIC2B && + magic2 !=LINUX_REBOOT_MAGIC2C ))return -EINVAL ;/* @@ -281,8 +285,6 @@ static int __orderly_poweroff(bool force) ret =call_usermodehelper (argv[0 ], argv, envp,UMH_WAIT_EXEC );argv_free (argv); }else { -pr_warn ("%s failed to allocate memory for \"%s\"\n" , - __func__, poweroff_cmd); ret = -ENOMEM ; }
Re: [Patch -v3 3/4] checkpatch.pl the new kernel/reboot.c file.
In reply to Joe PerchesQuoted 9 lines · Joe Perches
Quoted 2 lines · Robin Holt
I did allow the remaining 81 character line behind. It did not seem like it was worth changing. Otherwise, it now passes checkpatch.pl.
trivia:
I'd make these changes on top of your patch:
o Additional OOM messages aren't necessary as a
dump_stackis done
I am not sure what I should be doing with this one. The only message that seems close is the pr_warn("%s failed to allocate memory for... but I don't see how dump_stack is getting invoked so I think either you did not mean this message or you intended me to replace that with a dump_stack, in which case, the error message would still be informative and the dump_stack would be relatively useless.
Quoted 1 line
o Add
pr_fmtto prefix logging messages with "reboot: "
Done. I did not see anything in the CodingStyle about this so I hope I did it correctly. It will change some long-seen messages during shutdown/reboot. Is that acceptable?
Quoted 1 line
o Remove periods from logging messages
Done. I read the CodingStyle guide's "Kernel messages do not have to be terminated with a period." to mean they did not need to be removed. I would not normally have touched them as I effectively moved them from one file to another and I followed the guiding principal of do not mess with somebody else's code style (especially Linus') unless necessary.
Quoted 1 line
o Argument alignment
Again, not sure what you want here. I kept the formatting fairly consistent when I resolved the checkpatch.pl bits. I believe I only changed the formatting on one if() statement. I had used tab followed by space so I fixed that up in -v4.
Quoted 1 line
o Rename file prefix to "
reboot.c"
I did fix up the comment which said sys.c. Is that what you were asking for? If not, could you be more specific?
Quoted 1 line
o Add #include <
linux/suspend.h> so it compiles
Done.
Thanks,
Robin
Subject: [Patch -v4 3/4] checkpatch.pl the new kernel/reboot.c file.
I did allow the remaining 81 character line behind. It did not seem like it was worth changing. Otherwise, it now passes checkpatch.pl.
To: Ingo Molnar <[email protected]>
To: Russ Anderson <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux Kernel Mailing List <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: the arch/x86 maintainers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Joe Perches <[email protected]>
---
Changes since -v3:
Integrated feedback from Joe Perches.
kernel/reboot.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
kernel/reboot.c +14 -14
@@ -1,9 +1,11 @@/* -* linux/kernel/sys.c +* linux/kernel/reboot.c * * Copyright (C) 2013 Linus Torvalds */ +#define pr_fmt (fmt) "reboot: " fmt +#include <linux/export.h> #include <linux/kexec.h> #include <linux/kmod.h>
@@ -97,9 +99,9 @@ void kernel_restart(char *cmd)migrate_to_reboot_cpu ();syscore_shutdown ();if (!cmd) -printk (KERN_EMERG "Restarting system.\n" ); +pr_emerg ("Restarting system\n" );else -printk (KERN_EMERG "Restarting system with command '%s'.\n" , cmd); +pr_emerg ("Restarting system with command '%s'\n" , cmd);kmsg_dump (KMSG_DUMP_RESTART );machine_restart (cmd); }
@@ -108,7 +110,7 @@ EXPORT_SYMBOL_GPL(kernel_restart);static void kernel_shutdown_prepare (enum system_states state) {blocking_notifier_call_chain (&reboot_notifier_list, - (state ==SYSTEM_HALT )?SYS_HALT :SYS_POWER_OFF ,NULL ); + (state ==SYSTEM_HALT ) ?SYS_HALT :SYS_POWER_OFF ,NULL ); system_state = state;usermodehelper_disable ();device_shutdown ();
@@ -123,11 +125,10 @@ void kernel_halt(void)kernel_shutdown_prepare (SYSTEM_HALT );migrate_to_reboot_cpu ();syscore_shutdown (); -printk (KERN_EMERG "System halted.\n" ); +pr_emerg ("System halted\n" );kmsg_dump (KMSG_DUMP_HALT );machine_halt (); } -EXPORT_SYMBOL_GPL (kernel_halt);/**
@@ -142,7 +143,7 @@ void kernel_power_off(void)pm_power_off_prepare ();migrate_to_reboot_cpu ();syscore_shutdown (); -printk (KERN_EMERG "Power down.\n" ); +pr_emerg ("Power down\n" );kmsg_dump (KMSG_DUMP_POWEROFF );machine_power_off (); }
@@ -171,10 +172,10 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,/* For safety, we require "magic" arguments. */ if (magic1 !=LINUX_REBOOT_MAGIC1 || - (magic2 !=LINUX_REBOOT_MAGIC2 && - magic2 !=LINUX_REBOOT_MAGIC2A && + (magic2 !=LINUX_REBOOT_MAGIC2 && + magic2 !=LINUX_REBOOT_MAGIC2A && magic2 !=LINUX_REBOOT_MAGIC2B && - magic2 !=LINUX_REBOOT_MAGIC2C )) + magic2 !=LINUX_REBOOT_MAGIC2C ))return -EINVAL ;/*
@@ -283,14 +284,13 @@ static int __orderly_poweroff(bool force) ret =call_usermodehelper (argv[0 ], argv, envp,UMH_WAIT_EXEC );argv_free (argv); }else { -printk (KERN_WARNING "%s failed to allocate memory for \"%s\"\n" , - __func__, poweroff_cmd); +pr_warn ("%s failed to allocate memory for \"%s\"\n" , + __func__, poweroff_cmd); ret = -ENOMEM ; }if (ret && force) { -printk (KERN_WARNING "Failed to start orderly shutdown: " -"forcing the issue\n" ); +pr_warn ("Failed to start orderly shutdown: forcing the issue\n" );/* * I guess this should try to kick off some daemon to sync and * poweroff asap. Or not even bother syncing if we're doing an
Signature · 1 line
1.8.1.2
Re: [Patch -v3 3/4] checkpatch.pl the new kernel/reboot.c file.
(trimmed cc's)
Quoted 5 lines · Robin Holt
Quoted 3 lines · Joe Perches
trivia:
I'd make these changes on top of your patch:
o Additional OOM messages aren't necessary as adump_stackis doneI am not sure what I should be doing with this one.
It could be removed eventually.
Quoted 6 lines
The only message
that seems close is the pr_warn("%s failed to allocate memory for... but I don't see howdump_stackis getting invoked so I think either you did not mean this message or you intended me to replace that with adump_stack, in which case, the error message would still be informative and thedump_stackwould be relatively useless.
All failed mallocs without __GFP_NOWARN get a dump_stack via mm/page_alloc:warn_alloc_failed() so that pr_warn isn't really required.
PATCH 4/4 Make reboot_cpuid a kernel parameter.
In reply to Robin HoltMoving the reboot=s<##> parameter for x86 to a kernel parameter proper. I did not find any other arch that was specifying the reboot cpu.
To: Ingo Molnar <[email protected]>
To: Russ Anderson <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux Kernel Mailing List <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: the arch/x86 maintainers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
--- Documentation/kernel-parameters.txt | 2 ++ arch/x86/kernel/reboot.c | 44 ++++--------------------------------- kernel/reboot.c | 8 ++++++- 3 files changed, 13 insertions(+), 41 deletions(-)
Documentation/kernel-parameters.txt +2 -0
@@ -2597,6 +2597,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: <reboot_mode>[,<reboot_mode2>[,...]] See arch/*/kernel/reboot.c or arch/*/kernel/process.c + reboot_cpuid= [KNL] cpuid to use for reboot/halt, etc operations. + relax_domain_level= [KNL, SMP] Set scheduler's default relax_domain_level. See Documentation/cgroups/cpusets.txt.
arch/x86/kernel/reboot.c +4 -40
72 lines not on this page · raw message
kernel/reboot.c +7 -1
@@ -8,6 +8,7 @@#include <linux/kexec.h> #include <linux/kmod.h> #include <linux/kmsg_dump.h> +#include <linux/moduleparam.h> #include <linux/reboot.h> #include <linux/syscalls.h> #include <linux/syscore_ops.h>
@@ -66,13 +67,18 @@ int unregister_reboot_notifier(struct notifier_block *nb) }EXPORT_SYMBOL (unregister_reboot_notifier); +int reboot_cpuid; +core_param (reboot_cpuid, reboot_cpuid, int,0644 ); +void migrate_to_reboot_cpu (void ) {/* The boot cpu is always logical cpu 0 */ -int reboot_cpu_id =0 ; +int reboot_cpu_id = reboot_cpuid;/* Make certain the cpu I'm about to reboot on is online */ if (!cpu_online (reboot_cpu_id)) + reboot_cpu_id =0 ; +if (!cpu_online (reboot_cpu_id)) reboot_cpu_id =smp_processor_id ();/* Prevent races with other tasks migrating this task. */
Signature · 1 line
1.8.1.2
H. Peter Anvin
reviewerRe: [Patch -v3 4/4] Make reboot_cpuid a kernel parameter.
Um... doesn't this break anyone who currently depends on this?
Quoted 162 lines · Robin Holt
Moving the reboot=s<##> parameter for x86 to a kernel parameter proper. I did not find any other arch that was specifying the reboot cpu.
Signed-off-by Robin Holt <[email protected]>To: Ingo Molnar <[email protected]>
To: Russ Anderson <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux Kernel Mailing List <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: thearch/x86maintainers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
---Documentation/kernel-parameters.txt| 2 ++arch/x86/kernel/reboot.c| 44
++++---------------------------------kernel/reboot.c| 8 ++++++-3 files changed, 13 insertions(+), 41 deletions(-)Documentation/kernel-parameters.txt +0
-0@@ -2597,6 +2597,8 @@ bytes respectively. Such letter suffixes can alsobe entirely omitted.
Format: <reboot_mode>[,<reboot_mode2>[,...]] See arch/*/kernel/reboot.c or arch/*/kernel/process.cDocumentation/kernel-parameters.txt +2
-0+ reboot_cpuid= [KNL] cpuid to use for reboot/halt, etc operations. +relax_domain_level=
[KNL, SMP] Set scheduler's defaultrelax_domain_level. SeeDocumentation/cgroups/cpusets.txt.arch/x86/kernel/reboot.c +0
-5@@ -49,10 +49,6 @@ int reboot_force;*/ static int reboot_default =1 ; -#ifdef CONFIG_SMP -static int reboot_cpu =-1 ; -#endif -/* * This is set if we need to go through the 'emergency' path. * When machine_emergency_restart() is called, we may be on @@ -64,11 +60,10 @@ static int reboot_emergency;bool port_cf9_safe = false;/* -* reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]
+ * reboot=b[ios] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]* warm Don't set the cold reboot flag * cold Set the cold reboot flag * bios Reboot by jumping through the BIOS- * smp Reboot by executing reset on BSP or other CPU
* triple Force a triple fault (init)
* kbd Use the keyboard controller. cold reset (default)
* acpi Use theRESET_REGin the FADTarch/x86/kernel/reboot.c +3
-34@@ -95,21 +90,6 @@ static int __init reboot_setup(char *str) reboot_mode =0 ;break ; -#ifdef CONFIG_SMP -case 's' : -if (isdigit (*(str+1 ))) { - reboot_cpu = (int ) (*(str+1 ) -'0' ); -if (isdigit (*(str+2 ))) - reboot_cpu = reboot_cpu*10 + (int )(*(str+2 ) -'0' ); - } -/* -* We will leave sorting out the final value -* when we are ready to reboot, since we might not -* have detected BSP APIC ID or smp_num_cpu -*/ -break ; -#endif /* CONFIG_SMP */ -case 'b' :case 'a' :case 'k' :@@ -614,26 +594,10 @@ void native_machine_shutdown(void) {/* Stop the cpus and apics */ #ifdef CONFIG_SMP - -/* The boot cpu is always logical cpu 0 */ -int reboot_cpu_id =0 ; - -/* See if there has been given a command line override */ -if ((reboot_cpu !=-1 ) && (reboot_cpu < nr_cpu_ids) && -cpu_online (reboot_cpu)) - reboot_cpu_id = reboot_cpu; - -/* Make certain the cpu I'm about to reboot on is online */ -if (!cpu_online (reboot_cpu_id)) - reboot_cpu_id =smp_processor_id (); - -/* Make certain I only run on the appropriate processor */ -set_cpus_allowed_ptr (current,cpumask_of (reboot_cpu_id)); -/* -* O.K Now that I'm on the appropriate processor, stop all of the -* others. Also disable the local irq to not receive the per-cpu -* timer interrupt which may trigger scheduler's load balance. +* Stop all of the others. Also disable the local irq to +* not receive the per-cpu timer interrupt which may trigger +* scheduler's load balance. */ local_irq_disable ();stop_other_cpus ();kernel/reboot.c +7
-1@@ -8,6 +8,7 @@#include <linux/kexec.h> #include <linux/kmod.h> #include <linux/kmsg_dump.h> +#include <linux/moduleparam.h> #include <linux/reboot.h> #include <linux/syscalls.h> #include <linux/syscore_ops.h> @@ -66,13 +67,18 @@ int unregister_reboot_notifier(struct notifier_block *nb) }EXPORT_SYMBOL (unregister_reboot_notifier); +int reboot_cpuid; +core_param (reboot_cpuid, reboot_cpuid, int,0644 ); +void migrate_to_reboot_cpu (void ) {/* The boot cpu is always logical cpu 0 */ -int reboot_cpu_id =0 ; +int reboot_cpu_id = reboot_cpuid;/* Make certain the cpu I'm about to reboot on is online */ if (!cpu_online (reboot_cpu_id)) + reboot_cpu_id =0 ; +if (!cpu_online (reboot_cpu_id)) reboot_cpu_id =smp_processor_id ();/* Prevent races with other tasks migrating this task. */
Signature · 1 line
Sent from my mobile phone. Please excuse brevity and lack of formatting.
Re: [Patch -v3 4/4] Make reboot_cpuid a kernel parameter.
Quoted 1 line · H. Peter Anvin
Um... doesn't this break anyone who currently depends on this?
Yes. That is also why I kept this separate and not tagged for stable. They would need to start using the more general kernel parameter to get the same functionality. Should I have done it differently?
Robin
Quoted 168 lines
Quoted 162 lines · Robin Holt
Moving the reboot=s<##> parameter for x86 to a kernel parameter proper. I did not find any other arch that was specifying the reboot cpu.
Signed-off-by Robin Holt <[email protected]>To: Ingo Molnar <[email protected]>
To: Russ Anderson <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux Kernel Mailing List <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: thearch/x86maintainers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
---Documentation/kernel-parameters.txt| 2 ++arch/x86/kernel/reboot.c| 44
++++---------------------------------kernel/reboot.c| 8 ++++++-3 files changed, 13 insertions(+), 41 deletions(-)Documentation/kernel-parameters.txt +0
-0@@ -2597,6 +2597,8 @@ bytes respectively. Such letter suffixes can alsobe entirely omitted.
Format: <reboot_mode>[,<reboot_mode2>[,...]] See arch/*/kernel/reboot.c or arch/*/kernel/process.cDocumentation/kernel-parameters.txt +2
-0+ reboot_cpuid= [KNL] cpuid to use for reboot/halt, etc operations. +relax_domain_level=
[KNL, SMP] Set scheduler's defaultrelax_domain_level. SeeDocumentation/cgroups/cpusets.txt.arch/x86/kernel/reboot.c +0
-5@@ -49,10 +49,6 @@ int reboot_force;*/ static int reboot_default =1 ; -#ifdef CONFIG_SMP -static int reboot_cpu =-1 ; -#endif -/* * This is set if we need to go through the 'emergency' path. * When machine_emergency_restart() is called, we may be on @@ -64,11 +60,10 @@ static int reboot_emergency;bool port_cf9_safe = false;/* -* reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]
+ * reboot=b[ios] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]* warm Don't set the cold reboot flag * cold Set the cold reboot flag * bios Reboot by jumping through the BIOS- * smp Reboot by executing reset on BSP or other CPU
* triple Force a triple fault (init)
* kbd Use the keyboard controller. cold reset (default)
* acpi Use theRESET_REGin the FADTarch/x86/kernel/reboot.c +3
-34@@ -95,21 +90,6 @@ static int __init reboot_setup(char *str) reboot_mode =0 ;break ; -#ifdef CONFIG_SMP -case 's' : -if (isdigit (*(str+1 ))) { - reboot_cpu = (int ) (*(str+1 ) -'0' ); -if (isdigit (*(str+2 ))) - reboot_cpu = reboot_cpu*10 + (int )(*(str+2 ) -'0' ); - } -/* -* We will leave sorting out the final value -* when we are ready to reboot, since we might not -* have detected BSP APIC ID or smp_num_cpu -*/ -break ; -#endif /* CONFIG_SMP */ -case 'b' :case 'a' :case 'k' :@@ -614,26 +594,10 @@ void native_machine_shutdown(void) {/* Stop the cpus and apics */ #ifdef CONFIG_SMP - -/* The boot cpu is always logical cpu 0 */ -int reboot_cpu_id =0 ; - -/* See if there has been given a command line override */ -if ((reboot_cpu !=-1 ) && (reboot_cpu < nr_cpu_ids) && -cpu_online (reboot_cpu)) - reboot_cpu_id = reboot_cpu; - -/* Make certain the cpu I'm about to reboot on is online */ -if (!cpu_online (reboot_cpu_id)) - reboot_cpu_id =smp_processor_id (); - -/* Make certain I only run on the appropriate processor */ -set_cpus_allowed_ptr (current,cpumask_of (reboot_cpu_id)); -/* -* O.K Now that I'm on the appropriate processor, stop all of the -* others. Also disable the local irq to not receive the per-cpu -* timer interrupt which may trigger scheduler's load balance. +* Stop all of the others. Also disable the local irq to +* not receive the per-cpu timer interrupt which may trigger +* scheduler's load balance. */ local_irq_disable ();stop_other_cpus ();kernel/reboot.c +7
-1@@ -8,6 +8,7 @@#include <linux/kexec.h> #include <linux/kmod.h> #include <linux/kmsg_dump.h> +#include <linux/moduleparam.h> #include <linux/reboot.h> #include <linux/syscalls.h> #include <linux/syscore_ops.h> @@ -66,13 +67,18 @@ int unregister_reboot_notifier(struct notifier_block *nb) }EXPORT_SYMBOL (unregister_reboot_notifier); +int reboot_cpuid; +core_param (reboot_cpuid, reboot_cpuid, int,0644 ); +void migrate_to_reboot_cpu (void ) {/* The boot cpu is always logical cpu 0 */ -int reboot_cpu_id =0 ; +int reboot_cpu_id = reboot_cpuid;/* Make certain the cpu I'm about to reboot on is online */ if (!cpu_online (reboot_cpu_id)) + reboot_cpu_id =0 ; +if (!cpu_online (reboot_cpu_id)) reboot_cpu_id =smp_processor_id ();/* Prevent races with other tasks migrating this task. */Signature · 1 line
Sent from my mobile phone. Please excuse brevity and lack of formatting.
H. Peter Anvin
reviewerRe: [Patch -v3 4/4] Make reboot_cpuid a kernel parameter.
We usually don't break working user setups as a matter if policy. Only if it can't be avoided.
Quoted 180 lines · Robin Holt
Quoted 1 line · H. Peter Anvin
Um... doesn't this break anyone who currently depends on this?
Yes. That is also why I kept this separate and not tagged for stable. They would need to start using the more general kernel parameter
to get the same functionality. Should I have done it differently?Robin
Quoted 35 lines
Quoted 32 lines · Robin Holt
Moving the reboot=s<##> parameter for x86 to a kernel parameter proper. I did not find any other arch that was specifying the reboot cpu.
Signed-off-by Robin Holt <[email protected]>To: Ingo Molnar <[email protected]>
To: Russ Anderson <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux Kernel Mailing List <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: thearch/x86maintainers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
---Documentation/kernel-parameters.txt| 2 ++arch/x86/kernel/reboot.c| 44
++++---------------------------------kernel/reboot.c| 8 ++++++-3 files changed, 13 insertions(+), 41 deletions(-)Quoted 6 lines
Documentation/kernel-parameters.txt bytes respectively. Such letter suffixes can
Quoted 6 lines
Documentation/kernel-parameters.txt +0
-0@@ -2597,6 +2597,8 @@ bytes respectively. Such letter suffixes canalso
Quoted 117 lines
Quoted 117 lines
be entirely omitted.
Format: <reboot_mode>[,<reboot_mode2>[,...]] See arch/*/kernel/reboot.c or arch/*/kernel/process.cDocumentation/kernel-parameters.txt +2
-0+ reboot_cpuid= [KNL] cpuid to use for reboot/halt, etc operations. +relax_domain_level=
[KNL, SMP] Set scheduler's defaultrelax_domain_level. SeeDocumentation/cgroups/cpusets.txt.arch/x86/kernel/reboot.c +0
-5@@ -49,10 +49,6 @@ int reboot_force;*/ static int reboot_default =1 ; -#ifdef CONFIG_SMP -static int reboot_cpu =-1 ; -#endif -/* * This is set if we need to go through the 'emergency' path. * When machine_emergency_restart() is called, we may be on @@ -64,11 +60,10 @@ static int reboot_emergency;bool port_cf9_safe = false;/* -* reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]
+ * reboot=b[ios] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]* warm Don't set the cold reboot flag * cold Set the cold reboot flag * bios Reboot by jumping through the BIOS- * smp Reboot by executing reset on BSP or other CPU
* triple Force a triple fault (init)
* kbd Use the keyboard controller. cold reset (default)
* acpi Use theRESET_REGin the FADTarch/x86/kernel/reboot.c +3
-34@@ -95,21 +90,6 @@ static int __init reboot_setup(char *str) reboot_mode =0 ;break ; -#ifdef CONFIG_SMP -case 's' : -if (isdigit (*(str+1 ))) { - reboot_cpu = (int ) (*(str+1 ) -'0' ); -if (isdigit (*(str+2 ))) - reboot_cpu = reboot_cpu*10 + (int )(*(str+2 ) -'0' ); - } -/* -* We will leave sorting out the final value -* when we are ready to reboot, since we might not -* have detected BSP APIC ID or smp_num_cpu -*/ -break ; -#endif /* CONFIG_SMP */ -case 'b' :case 'a' :case 'k' :@@ -614,26 +594,10 @@ void native_machine_shutdown(void) {/* Stop the cpus and apics */ #ifdef CONFIG_SMP - -/* The boot cpu is always logical cpu 0 */ -int reboot_cpu_id =0 ; - -/* See if there has been given a command line override */ -if ((reboot_cpu !=-1 ) && (reboot_cpu < nr_cpu_ids) && -cpu_online (reboot_cpu)) - reboot_cpu_id = reboot_cpu; - -/* Make certain the cpu I'm about to reboot on is online */ -if (!cpu_online (reboot_cpu_id)) - reboot_cpu_id =smp_processor_id (); - -/* Make certain I only run on the appropriate processor */ -set_cpus_allowed_ptr (current,cpumask_of (reboot_cpu_id)); -/* -* O.K Now that I'm on the appropriate processor, stop all of the -* others. Also disable the local irq to not receive the per-cpu -* timer interrupt which may trigger scheduler's load balance. +* Stop all of the others. Also disable the local irq to +* not receive the per-cpu timer interrupt which may trigger +* scheduler's load balance. */ local_irq_disable ();stop_other_cpus ();kernel/reboot.c +5
-1@@ -8,6 +8,7 @@#include <linux/kexec.h> #include <linux/kmod.h> #include <linux/kmsg_dump.h> +#include <linux/moduleparam.h> #include <linux/reboot.h> #include <linux/syscalls.h> #include <linux/syscore_ops.h> @@ -66,13 +67,18 @@ int unregister_reboot_notifier(struct notifier_block *nb) }EXPORT_SYMBOL (unregister_reboot_notifier); +int reboot_cpuid; +core_param (reboot_cpuid, reboot_cpuid, int,0644 ); +void migrate_to_reboot_cpu (void ) {/* The boot cpu is always logical cpu 0 */ -int reboot_cpu_id =0 ; +int reboot_cpu_id = reboot_cpuid;Quoted 10 lines
Quoted 7 lines
kernel/reboot.c +2
-0/* Make certain the cpu I'm about to reboot on is online */ if (!cpu_online (reboot_cpu_id)) + reboot_cpu_id =0 ; +if (!cpu_online (reboot_cpu_id)) reboot_cpu_id =smp_processor_id ();/* Prevent races with other tasks migrating this task. */Signature · 1 line
Sent from my mobile phone. Please excuse brevity and lack offormatting.
Signature · 1 line
Sent from my mobile phone. Please excuse brevity and lack of formatting.
Re: [Patch -v3 4/4] Make reboot_cpuid a kernel parameter.
Quoted 11 lines · H. Peter Anvin
We usually don't break working user setups as a matter if policy. Only if it can't be avoided.
Quoted 7 lines · Robin Holt
Quoted 1 line · H. Peter Anvin
Um... doesn't this break anyone who currently depends on this?
Yes. That is also why I kept this separate and not tagged for stable. They would need to start using the more general kernel parameter
to get the same functionality. Should I have done it differently?
How about:
Author: Robin Holt <[email protected]> Date: Mon Apr 15 11:39:33 2013 -0500
Make reboot_cpuid a kernel parameter.
Moving the reboot=s<##> parameter for x86 to a kernel parameter proper. I did not find any other arch that was specifying the reboot cpu.
I left a compatibility mode in there. The new parameter always takes precedence. I also fixed up the current code to support up to cpuid's up to the current max of 4096.
To: Ingo Molnar <[email protected]>
To: Russ Anderson <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux Kernel Mailing List <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robin Holt <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: the arch/x86 maintainers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Documentation/kernel-parameters.txt +2 -0
@@ -2597,6 +2597,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: <reboot_mode>[,<reboot_mode2>[,...]] See arch/*/kernel/reboot.c or arch/*/kernel/process.c + reboot_cpuid= [KNL] cpuid to use for reboot/halt, etc operations. + relax_domain_level= [KNL, SMP] Set scheduler's default relax_domain_level. See Documentation/cgroups/cpusets.txt.
arch/x86/kernel/reboot.c +13 -26
@@ -49,10 +49,6 @@ int reboot_force;*/ static int reboot_default =1 ; -#ifdef CONFIG_SMP -static int reboot_cpu =-1 ; -#endif -/* * This is set if we need to go through the 'emergency' path. * When machine_emergency_restart() is called, we may be on
@@ -63,6 +59,8 @@ static int reboot_emergency;/* This is set by the PCI code if either type 1 or type 2 PCI is detected */ bool port_cf9_safe = false; +extern int reboot_cpuid; +/* * reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci] * warm Don't set the cold reboot flag
@@ -97,10 +95,14 @@ static int __init reboot_setup(char *str)#ifdef CONFIG_SMP case 's' : -if (isdigit (*(str+1 ))) { - reboot_cpu = (int ) (*(str+1 ) -'0' ); -if (isdigit (*(str+2 ))) - reboot_cpu = reboot_cpu*10 + (int )(*(str+2 ) -'0' ); +if (reboot_cpuid <0 ) { +int coffset; + + reboot_cpuid =0 ; +for (coffset =1 ;isdigit (*(str + coffset)); coffset++) { + reboot_cpuid *=10 ; + reboot_cpuid += (int )(*(str+2 ) -'0' ); + } }/* * We will leave sorting out the final value
@@ -615,25 +617,10 @@ void native_machine_shutdown(void)/* Stop the cpus and apics */ #ifdef CONFIG_SMP -/* The boot cpu is always logical cpu 0 */ -int reboot_cpu_id =0 ; - -/* See if there has been given a command line override */ -if ((reboot_cpu !=-1 ) && (reboot_cpu < nr_cpu_ids) && -cpu_online (reboot_cpu)) - reboot_cpu_id = reboot_cpu; - -/* Make certain the cpu I'm about to reboot on is online */ -if (!cpu_online (reboot_cpu_id)) - reboot_cpu_id =smp_processor_id (); - -/* Make certain I only run on the appropriate processor */ -set_cpus_allowed_ptr (current,cpumask_of (reboot_cpu_id)); -/* -* O.K Now that I'm on the appropriate processor, stop all of the -* others. Also disable the local irq to not receive the per-cpu -* timer interrupt which may trigger scheduler's load balance. +* Stop all of the others. Also disable the local irq to +* not receive the per-cpu timer interrupt which may trigger +* scheduler's load balance. */ local_irq_disable ();stop_other_cpus ();
kernel/reboot.c +7 -1
@@ -8,6 +8,7 @@#include <linux/kexec.h> #include <linux/kmod.h> #include <linux/kmsg_dump.h> +#include <linux/moduleparam.h> #include <linux/reboot.h> #include <linux/syscalls.h> #include <linux/syscore_ops.h>
@@ -66,13 +67,18 @@ int unregister_reboot_notifier(struct notifier_block *nb) }EXPORT_SYMBOL (unregister_reboot_notifier); +int reboot_cpuid =-1 ; +core_param (reboot_cpuid, reboot_cpuid, int,0644 ); +void migrate_to_reboot_cpu (void ) {/* The boot cpu is always logical cpu 0 */ -int reboot_cpu_id =0 ; +int reboot_cpu_id = reboot_cpuid;/* Make certain the cpu I'm about to reboot on is online */ if (!cpu_online (reboot_cpu_id)) + reboot_cpu_id =0 ; +if (!cpu_online (reboot_cpu_id)) reboot_cpu_id =smp_processor_id ();/* Prevent races with other tasks migrating this task. */
Re: [Patch -v3 4/4] Make reboot_cpuid a kernel parameter.
Quoted 19 lines · Robin Holt
Quoted 11 lines · H. Peter Anvin
We usually don't break working user setups as a matter if policy. Only if it can't be avoided.
Quoted 7 lines · Robin Holt
Quoted 1 line · H. Peter Anvin
Um... doesn't this break anyone who currently depends on this?
Yes. That is also why I kept this separate and not tagged for stable. They would need to start using the more general kernel parameter
to get the same functionality. Should I have done it differently?How about:
Author: Robin Holt <[email protected]> Date: Mon Apr 15 11:39:33 2013 -0500Make
reboot_cpuida kernel parameter.
Quoted 7 lines
Moving the reboot=s<##> parameter for x86 to a kernel parameter proper. I did not find any other arch that was specifying the reboot cpu.
I left a compatibility mode in there. The new parameter always takes precedence. I also fixed up the current code to support up to cpuid's up to the current max of 4096.
Looks pretty nice and clean to me, as the old boot parameter still keeps working.
Mind sending an updated series that includes all the fixes and the Tested-by from Shawn Guo?
Thanks,
Ingo
Re: [Patch -v3 4/4] Make reboot_cpuid a kernel parameter.
Quoted 26 lines · Ingo Molnar
Quoted 23 lines · Robin Holt
Quoted 11 lines · H. Peter Anvin
We usually don't break working user setups as a matter if policy. Only if it can't be avoided.
Quoted 7 lines · Robin Holt
Quoted 1 line · H. Peter Anvin
Um... doesn't this break anyone who currently depends on this?
Yes. That is also why I kept this separate and not tagged for stable. They would need to start using the more general kernel parameter
to get the same functionality. Should I have done it differently?How about:
Author: Robin Holt <[email protected]> Date: Mon Apr 15 11:39:33 2013 -0500Make
reboot_cpuida kernel parameter.Moving the reboot=s<##> parameter for x86 to a kernel parameter proper. I did not find any other arch that was specifying the reboot cpu.
Quoted 8 lines
Quoted 3 lines
I left a compatibility mode in there. The new parameter always takes precedence. I also fixed up the current code to support up to cpuid's up to the current max of 4096.
Looks pretty nice and clean to me, as the old boot parameter still keeps working.
Mind sending an updated series that includes all the fixes and the Tested-by from Shawn Guo?
Will do. I am still going through the comments from Joe Perches to the third patch. Already have added the Tested-by to just the first patch. Otherwise, I am ready to send -v4.
Robin
Re: [Patch -v3 4/4] Make reboot_cpuid a kernel parameter.
Quoted 31 lines · Robin Holt
Quoted 30 lines · Ingo Molnar
Quoted 26 lines · Robin Holt
Quoted 11 lines · H. Peter Anvin
We usually don't break working user setups as a matter if policy. Only if it can't be avoided.
Quoted 7 lines · Robin Holt
Quoted 1 line · H. Peter Anvin
Um... doesn't this break anyone who currently depends on this?
Yes. That is also why I kept this separate and not tagged for stable. They would need to start using the more general kernel parameter
to get the same functionality. Should I have done it differently?How about:
Author: Robin Holt <[email protected]> Date: Mon Apr 15 11:39:33 2013 -0500Make
reboot_cpuida kernel parameter.Moving the reboot=s<##> parameter for x86 to a kernel parameter proper. I did not find any other arch that was specifying the reboot cpu.
I left a compatibility mode in there. The new parameter always takes precedence. I also fixed up the current code to support up to cpuid's up to the current max of 4096.
Quoted 7 lines
Quoted 4 lines
Looks pretty nice and clean to me, as the old boot parameter still keeps working.
Mind sending an updated series that includes all the fixes and the Tested-by from Shawn Guo?
Will do. I am still going through the comments from Joe Perches to the third patch. [...]
Those fixes looked sensible to me.
Quoted 2 lines
[...] Already have added the Tested-by to just the first patch. Otherwise, I am ready to send -v4.
Cool, thanks.
Assuming there are no objections from others, this looks like v3.10 material, as we are right before the final v3.9 release and this touches core kernel code (which is risky in such a late stage). It all needs a few days of testing as well, since it affects the reboot path of pretty much every Linux box in existence that runs the updated kernel.
Would you like to see this fix backported? If yes then your simpler v1 patch to kernel/sys.c from a few days ago should probably be put into the series as patch #1, partially reverted by patch #2 et al.
Then patch #1 can be sent to -stable in a compact form, not the whole series. The end result of the series would not change.
Thanks,
Ingo