Skip to contentSkip to conversation

of/pci: Provide common support for PCI DT parsing

PATCH Superseded Andrew Murray 6 participants 17 messages Apr 11, 2013 – Apr 16, 2013

Subsystems (6)
PowerPC PCI MIPS Arm Samsung Exynos +2 more subsystems

v6 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v6 cover of/pci: Provide common support for PCI DT parsing

This patchset factors out duplicated code associated with parsing PCI DT "ranges" properties across the architectures and introduces a "ranges" parser. This parser "of_pci_range_parser" can be used directly by ARM host bridge drivers enabling them to obtain ranges from device trees.

I've included the Reviewed-by and Tested-by's received from v5 in this patchset, earlier versions of this patchset (v3) have been tested-by:

Thierry Reding <[email protected]>
Jingoo Han <[email protected]>

I believe a version of this patchset has also been tested through its inclusion in Thomas Petazzoni's Armada 370 and Armada XP SoCs PCIe support by:

Linus Walleij <[email protected]>

I've tested that this patchset builds and runs on ARM and that it builds on PowerPC.

Compared to the v5 sent by Andrew Murray, the following changes have been made:

* Use of CONFIG_64BIT instead of CONFIG_[a32bitarch] as suggested by Rob Herring in drivers/of/of_pci.c

* Added forward declaration of struct pci_controller in linux/of_pci.h to prevent compiler warning as suggested by Thomas Petazzoni

* Improved error checking (!range check), removal of unnecessary be32_to_cpup call, improved formatting of struct of_pci_range_parser layout and replacement of macro with a static inline. All suggested by Rob Herring.

Compared to the v4 (incorrectly labelled v3) sent by Andrew Murray, the following changes have been made:

* Split the patch as suggested by Rob Herring

Compared to the v3 sent by Andrew Murray, the following changes have been made:

* Unify and move duplicate pci_process_bridge_OF_ranges functions to drivers/of/of_pci.c as suggested by Rob Herring

* Fix potential build errors with Microblaze/MIPS

Compared to "[PATCH v5 01/17] of/pci: Provide support for parsing PCI DT ranges property", the following changes have been made:

* Correct use of IORESOURCE_* as suggested by Russell King

* Improved interface and naming as suggested by Thierry Reding

Compared to the v2 sent by Andrew Murray, Thomas Petazzoni did:

* Add a memset() on the struct of_pci_range_iter when starting the for loop in for_each_pci_range(). Otherwise, with an uninitialized of_pci_range_iter, of_pci_process_ranges() may crash.

* Add parenthesis around 'res', 'np' and 'iter' in the for_each_of_pci_range macro definitions. Otherwise, passing something like &foobar as 'res' didn't work.

* Rebased on top of 3.9-rc2, which required fixing a few conflicts in the Microblaze code.

v2:
This follows on from suggestions made by Grant Likely (marc.info/?l=linux-kernel&m=136079602806328)

Andrew Murray (3):
of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and
PowerPC
of/pci: Provide support for parsing PCI DT ranges property of/pci: mips: convert to common of_pci_range_parser

 arch/microblaze/include/asm/pci-bridge.h |    5 +-
 arch/microblaze/pci/pci-common.c         |  192 ------------------------------
 arch/mips/pci/pci.c                      |   50 +++------
 arch/powerpc/include/asm/pci-bridge.h    |    5 +-
 arch/powerpc/kernel/pci-common.c         |  192 ------------------------------
 drivers/of/address.c                     |   66 ++++++++++
 drivers/of/of_pci.c                      |  168 ++++++++++++++++++++++++++
 include/linux/of_address.h               |   46 +++++++
 include/linux/of_pci.h                   |    4 +
 9 files changed, 302 insertions(+), 426 deletions(-)
#1 lore raw

PATCH v6 1/3 of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC

The pci_process_bridge_OF_ranges function, used to parse the "ranges" property of a PCI host device, is found in both Microblaze and PowerPC architectures. These implementations are nearly identical. This patch moves this common code to a common place.

---
 arch/microblaze/include/asm/pci-bridge.h |    5 +-
 arch/microblaze/pci/pci-common.c         |  192 ----------------------------
 arch/powerpc/include/asm/pci-bridge.h    |    5 +-
 arch/powerpc/kernel/pci-common.c         |  192 ----------------------------
 drivers/of/of_pci.c                      |  200 ++++++++++++++++++++++++++++++
 include/linux/of_pci.h                   |    4 +
 6 files changed, 206 insertions(+), 392 deletions(-)
arch/microblaze/include/asm/pci-bridge.h +1 -4
index cb5d397..5783cd6 100644
@@ -10,6 +10,7 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/of_pci.h>
 
 struct device_node;
 
@@ -132,10 +133,6 @@ extern void setup_indirect_pci(struct pci_controller *hose,
 extern struct pci_controller *pci_find_hose_for_OF_device(
 			struct device_node *node);
 
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
 /* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
arch/microblaze/pci/pci-common.c +0 -192

198 lines not on this page · raw message

arch/powerpc/include/asm/pci-bridge.h +1 -4
index 025a130..205bfba 100644
@@ -10,6 +10,7 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/of_pci.h>
 #include <asm-generic/pci-bridge.h>
 
 struct device_node;
@@ -231,10 +232,6 @@ extern int pcibios_map_io_space(struct pci_bus *bus);
 extern struct pci_controller *pci_find_hose_for_OF_device(
 			struct device_node* node);
 
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
 /* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
arch/powerpc/kernel/pci-common.c +0 -192

198 lines not on this page · raw message

drivers/of/of_pci.c +200 -0

209 lines not on this page · raw message

include/linux/of_pci.h +4 -0
index bb115de..33e8ead 100644
@@ -11,4 +11,8 @@ struct device_node;
 struct device_node *of_pci_find_child_device(struct device_node *parent,
 					     unsigned int devfn);
 
+struct pci_controller;
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
 #endif
Signature · 1 line
1.7.0.4
#2 lore raw

Re: [PATCH v6 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC

Michal, Ben,

Would you have some time to look at this patch and give your comments and/or ACK ? Since it touches the PowerPC and Microblaze core code, we need your agreement to merge this code, and quite a bit of code pending for 3.10 depends on this patch.

Rob, alternatively, could we imagine doing a different version of the 'of/pci: Provide support for parsing PCI DT ranges property' that introduces the new API only, leaving the PowerPC and Microblaze rework as follow-up efforts, so that all the PCIe drivers that depend on this patch can get in for 3.10 ? I'd find it pretty sad if the Marvell PCIe driver that has been worked on since 4+ months does not get into 3.10 just because this patch cannot be merged.

Thanks!

Thomas

Quoted 698 lines · Andrew Murray

The pci_process_bridge_OF_ranges function, used to parse the "ranges" property of a PCI host device, is found in both Microblaze and PowerPC architectures. These implementations are nearly identical. This patch moves this common code to a common place.

---
 arch/microblaze/include/asm/pci-bridge.h |    5 +-
 arch/microblaze/pci/pci-common.c         |  192 ----------------------------
 arch/powerpc/include/asm/pci-bridge.h    |    5 +-
 arch/powerpc/kernel/pci-common.c         |  192 ----------------------------
 drivers/of/of_pci.c                      |  200 ++++++++++++++++++++++++++++++
 include/linux/of_pci.h                   |    4 +
 6 files changed, 206 insertions(+), 392 deletions(-)
arch/microblaze/include/asm/pci-bridge.h +1 -4
index cb5d397..5783cd6 100644
@@ -10,6 +10,7 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/of_pci.h>
 
 struct device_node;
 
@@ -132,10 +133,6 @@ extern void setup_indirect_pci(struct pci_controller *hose,
 extern struct pci_controller *pci_find_hose_for_OF_device(
 			struct device_node *node);
 
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
 /* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
arch/microblaze/pci/pci-common.c +0 -192
index 9ea521e..2735ad9 100644
@@ -622,198 +622,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 	*end = rsrc->end - offset;
 }
 
-/**
- * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
- * @hose: newly allocated pci_controller to be setup
- * @dev: device node of the host bridge
- * @primary: set if primary bus (32 bits only, soon to be deprecated)
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping of a pci controller based on its
- * content.
- *
- * Life would be boring if it wasn't for a few issues that we have to deal
- * with here:
- *
- *   - We can only cope with one IO space range and up to 3 Memory space
- *     ranges. However, some machines (thanks Apple !) tend to split their
- *     space into lots of small contiguous ranges. So we have to coalesce.
- *
- *   - We can only cope with all memory ranges having the same offset
- *     between CPU addresses and PCI addresses. Unfortunately, some bridges
- *     are setup for a large 1:1 mapping along with a small "window" which
- *     maps PCI address 0 to some arbitrary high address of the CPU space in
- *     order to give access to the ISA memory hole.
- *     The way out of here that I've chosen for now is to always set the
- *     offset based on the first resource found, then override it if we
- *     have a different offset and the previous was set by an ISA hole.
- *
- *   - Some busses have IO space not starting at 0, which causes trouble with
- *     the way we do our IO resource renumbering. The code somewhat deals with
- *     it for 64 bits but I would expect problems on 32 bits.
- *
- *   - Some 32 bits platforms such as 4xx can have physical space larger than
- *     32 bits so we need to use 64 bits values for the parsing
- */
-void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-				  struct device_node *dev, int primary)
-{
-	const u32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
-	int memno = 0, isa_hole = -1;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
-	unsigned long long isa_mb = 0;
-	struct resource *res;
-
-	pr_info("PCI host bridge %s %s ranges:\n",
-	       dev->full_name, primary ? "(primary)" : "");
-
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
-
-	/* Parse it */
-	pr_debug("Parsing ranges property...\n");
-	while ((rlen -= np * 4) >= 0) {
-		/* Read next ranges element */
-		pci_space = ranges[0];
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-
-		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
-				pci_space, pci_addr);
-		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
-					cpu_addr, size);
-
-		ranges += np;
-
-		/* If we failed translation or got a zero-sized region
-		 * (some FW try to feed us with non sensical zero sized regions
-		 * such as power3 which look like some kind of attempt
-		 * at exposing the VGA memory hole)
-		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
-			continue;
-
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
-		/* Act based on address space type */
-		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
-			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
-
-			/* We support only one IO range */
-			if (hose->pci_io_size) {
-				pr_info(" \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
-
-			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
-
-			/* Expect trouble if pci_addr is not 0 */
-			if (primary)
-				isa_io_base =
-					(unsigned long)hose->io_base_virt;
-			/* pci_io_size and io_base_phys always represent IO
-			 * space starting at 0 so we factor in pci_addr
-			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
-
-			/* Build resource */
-			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
-			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
-
-			/* We support only 3 memory ranges */
-			if (memno >= 3) {
-				pr_info(" \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
-				isa_mb = cpu_addr;
-				isa_hole = memno;
-				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
-			}
-
-			/* We get the PCI/Mem offset from the first range or
-			 * the, current one if the offset came from an ISA
-			 * hole. If they don't match, bugger.
-			 */
-			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
-			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
-			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
-				pr_info(" \\--> Skipped (offset mismatch) !\n");
-				continue;
-			}
-
-			/* Build resource */
-			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
-	}
-
-	/* If there's an ISA hole and the pci_mem_offset is -not- matching
-	 * the ISA hole offset, then we need to remove the ISA hole from
-	 * the resource list for that brige
-	 */
-	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
-		unsigned int next = isa_hole + 1;
-		pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
-		if (next < memno)
-			memmove(&hose->mem_resources[isa_hole],
-				&hose->mem_resources[next],
-				sizeof(struct resource) * (memno - next));
-		hose->mem_resources[--memno].flags = 0;
-	}
-}
-
 /* Decide whether to display the domain number in /proc */
 int pci_proc_domain(struct pci_bus *bus)
 {
arch/powerpc/include/asm/pci-bridge.h +1 -4
index 025a130..205bfba 100644
@@ -10,6 +10,7 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/of_pci.h>
 #include <asm-generic/pci-bridge.h>
 
 struct device_node;
@@ -231,10 +232,6 @@ extern int pcibios_map_io_space(struct pci_bus *bus);
 extern struct pci_controller *pci_find_hose_for_OF_device(
 			struct device_node* node);
 
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
 /* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
arch/powerpc/kernel/pci-common.c +0 -192
index fa12ae4..6edf396 100644
@@ -640,198 +640,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 	*end = rsrc->end - offset;
 }
 
-/**
- * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
- * @hose: newly allocated pci_controller to be setup
- * @dev: device node of the host bridge
- * @primary: set if primary bus (32 bits only, soon to be deprecated)
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping of a pci controller based on its
- * content.
- *
- * Life would be boring if it wasn't for a few issues that we have to deal
- * with here:
- *
- *   - We can only cope with one IO space range and up to 3 Memory space
- *     ranges. However, some machines (thanks Apple !) tend to split their
- *     space into lots of small contiguous ranges. So we have to coalesce.
- *
- *   - We can only cope with all memory ranges having the same offset
- *     between CPU addresses and PCI addresses. Unfortunately, some bridges
- *     are setup for a large 1:1 mapping along with a small "window" which
- *     maps PCI address 0 to some arbitrary high address of the CPU space in
- *     order to give access to the ISA memory hole.
- *     The way out of here that I've chosen for now is to always set the
- *     offset based on the first resource found, then override it if we
- *     have a different offset and the previous was set by an ISA hole.
- *
- *   - Some busses have IO space not starting at 0, which causes trouble with
- *     the way we do our IO resource renumbering. The code somewhat deals with
- *     it for 64 bits but I would expect problems on 32 bits.
- *
- *   - Some 32 bits platforms such as 4xx can have physical space larger than
- *     32 bits so we need to use 64 bits values for the parsing
- */
-void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-				  struct device_node *dev, int primary)
-{
-	const u32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
-	int memno = 0, isa_hole = -1;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
-	unsigned long long isa_mb = 0;
-	struct resource *res;
-
-	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
-	       dev->full_name, primary ? "(primary)" : "");
-
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
-
-	/* Parse it */
-	while ((rlen -= np * 4) >= 0) {
-		/* Read next ranges element */
-		pci_space = ranges[0];
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-		ranges += np;
-
-		/* If we failed translation or got a zero-sized region
-		 * (some FW try to feed us with non sensical zero sized regions
-		 * such as power3 which look like some kind of attempt at exposing
-		 * the VGA memory hole)
-		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
-			continue;
-
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
-		/* Act based on address space type */
-		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
-			printk(KERN_INFO
-			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
-
-			/* We support only one IO range */
-			if (hose->pci_io_size) {
-				printk(KERN_INFO
-				       " \\--> Skipped (too many) !\n");
-				continue;
-			}
-#ifdef CONFIG_PPC32
-			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
-
-			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
-
-			/* Expect trouble if pci_addr is not 0 */
-			if (primary)
-				isa_io_base =
-					(unsigned long)hose->io_base_virt;
-#endif /* CONFIG_PPC32 */
-			/* pci_io_size and io_base_phys always represent IO
-			 * space starting at 0 so we factor in pci_addr
-			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
-
-			/* Build resource */
-			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
-			printk(KERN_INFO
-			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
-
-			/* We support only 3 memory ranges */
-			if (memno >= 3) {
-				printk(KERN_INFO
-				       " \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
-				isa_mb = cpu_addr;
-				isa_hole = memno;
-				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
-			}
-
-			/* We get the PCI/Mem offset from the first range or
-			 * the, current one if the offset came from an ISA
-			 * hole. If they don't match, bugger.
-			 */
-			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
-			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
-			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
-				printk(KERN_INFO
-				       " \\--> Skipped (offset mismatch) !\n");
-				continue;
-			}
-
-			/* Build resource */
-			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
-	}
-
-	/* If there's an ISA hole and the pci_mem_offset is -not- matching
-	 * the ISA hole offset, then we need to remove the ISA hole from
-	 * the resource list for that brige
-	 */
-	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
-		unsigned int next = isa_hole + 1;
-		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
-		if (next < memno)
-			memmove(&hose->mem_resources[isa_hole],
-				&hose->mem_resources[next],
-				sizeof(struct resource) * (memno - next));
-		hose->mem_resources[--memno].flags = 0;
-	}
-}
-
 /* Decide whether to display the domain number in /proc */
 int pci_proc_domain(struct pci_bus *bus)
 {
drivers/of/of_pci.c +200 -0
index 13e37e2..1626172 100644
@@ -4,6 +4,10 @@
 #include <linux/of_pci.h>
 #include <asm/prom.h>
 
+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
+#include <asm/pci-bridge.h>
+#endif
+
 static inline int __of_pci_pci_compare(struct device_node *node,
 				       unsigned int devfn)
 {
@@ -40,3 +44,199 @@ struct device_node *of_pci_find_child_device(struct device_node *parent,
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(of_pci_find_child_device);
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ *   - We can only cope with one IO space range and up to 3 Memory space
+ *     ranges. However, some machines (thanks Apple !) tend to split their
+ *     space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ *   - We can only cope with all memory ranges having the same offset
+ *     between CPU addresses and PCI addresses. Unfortunately, some bridges
+ *     are setup for a large 1:1 mapping along with a small "window" which
+ *     maps PCI address 0 to some arbitrary high address of the CPU space in
+ *     order to give access to the ISA memory hole.
+ *     The way out of here that I've chosen for now is to always set the
+ *     offset based on the first resource found, then override it if we
+ *     have a different offset and the previous was set by an ISA hole.
+ *
+ *   - Some busses have IO space not starting at 0, which causes trouble with
+ *     the way we do our IO resource renumbering. The code somewhat deals with
+ *     it for 64 bits but I would expect problems on 32 bits.
+ *
+ *   - Some 32 bits platforms such as 4xx can have physical space larger than
+ *     32 bits so we need to use 64 bits values for the parsing
+ */
+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+				  struct device_node *dev, int primary)
+{
+	const u32 *ranges;
+	int rlen;
+	int pna = of_n_addr_cells(dev);
+	int np = pna + 5;
+	int memno = 0, isa_hole = -1;
+	u32 pci_space;
+	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
+	unsigned long long isa_mb = 0;
+	struct resource *res;
+
+	pr_info("PCI host bridge %s %s ranges:\n",
+	       dev->full_name, primary ? "(primary)" : "");
+
+	/* Get ranges property */
+	ranges = of_get_property(dev, "ranges", &rlen);
+	if (ranges == NULL)
+		return;
+
+	/* Parse it */
+	pr_debug("Parsing ranges property...\n");
+	while ((rlen -= np * 4) >= 0) {
+		/* Read next ranges element */
+		pci_space = ranges[0];
+		pci_addr = of_read_number(ranges + 1, 2);
+		cpu_addr = of_translate_address(dev, ranges + 3);
+		size = of_read_number(ranges + pna + 3, 2);
+
+		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
+				pci_space, pci_addr);
+		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
+					cpu_addr, size);
+
+		ranges += np;
+
+		/* If we failed translation or got a zero-sized region
+		 * (some FW try to feed us with non sensical zero sized regions
+		 * such as power3 which look like some kind of attempt
+		 * at exposing the VGA memory hole)
+		 */
+		if (cpu_addr == OF_BAD_ADDR || size == 0)
+			continue;
+
+		/* Now consume following elements while they are contiguous */
+		for (; rlen >= np * sizeof(u32);
+		     ranges += np, rlen -= np * 4) {
+			if (ranges[0] != pci_space)
+				break;
+			pci_next = of_read_number(ranges + 1, 2);
+			cpu_next = of_translate_address(dev, ranges + 3);
+			if (pci_next != pci_addr + size ||
+			    cpu_next != cpu_addr + size)
+				break;
+			size += of_read_number(ranges + pna + 3, 2);
+		}
+
+		/* Act based on address space type */
+		res = NULL;
+		switch ((pci_space >> 24) & 0x3) {
+		case 1:		/* PCI IO space */
+			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr);
+
+			/* We support only one IO range */
+			if (hose->pci_io_size) {
+				pr_info(" \\--> Skipped (too many) !\n");
+				continue;
+			}
+#if (!IS_ENABLED(CONFIG_64BIT))
+			/* On 32 bits, limit I/O space to 16MB */
+			if (size > 0x01000000)
+				size = 0x01000000;
+
+			/* 32 bits needs to map IOs here */
+			hose->io_base_virt = ioremap(cpu_addr, size);
+
+			/* Expect trouble if pci_addr is not 0 */
+			if (primary)
+				isa_io_base =
+					(unsigned long)hose->io_base_virt;
+#endif /* !CONFIG_64BIT */
+			/* pci_io_size and io_base_phys always represent IO
+			 * space starting at 0 so we factor in pci_addr
+			 */
+			hose->pci_io_size = pci_addr + size;
+			hose->io_base_phys = cpu_addr - pci_addr;
+
+			/* Build resource */
+			res = &hose->io_resource;
+			res->flags = IORESOURCE_IO;
+			res->start = pci_addr;
+			break;
+		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
+			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr,
+			       (pci_space & 0x40000000) ? "Prefetch" : "");
+
+			/* We support only 3 memory ranges */
+			if (memno >= 3) {
+				pr_info(" \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* Handles ISA memory hole space here */
+			if (pci_addr == 0) {
+				isa_mb = cpu_addr;
+				isa_hole = memno;
+				if (primary || isa_mem_base == 0)
+					isa_mem_base = cpu_addr;
+				hose->isa_mem_phys = cpu_addr;
+				hose->isa_mem_size = size;
+			}
+
+			/* We get the PCI/Mem offset from the first range or
+			 * the, current one if the offset came from an ISA
+			 * hole. If they don't match, bugger.
+			 */
+			if (memno == 0 ||
+			    (isa_hole >= 0 && pci_addr != 0 &&
+			     hose->pci_mem_offset == isa_mb))
+				hose->pci_mem_offset = cpu_addr - pci_addr;
+			else if (pci_addr != 0 &&
+				 hose->pci_mem_offset != cpu_addr - pci_addr) {
+				pr_info(" \\--> Skipped (offset mismatch) !\n");
+				continue;
+			}
+
+			/* Build resource */
+			res = &hose->mem_resources[memno++];
+			res->flags = IORESOURCE_MEM;
+			if (pci_space & 0x40000000)
+				res->flags |= IORESOURCE_PREFETCH;
+			res->start = cpu_addr;
+			break;
+		}
+		if (res != NULL) {
+			res->name = dev->full_name;
+			res->end = res->start + size - 1;
+			res->parent = NULL;
+			res->sibling = NULL;
+			res->child = NULL;
+		}
+	}
+
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
+	}
+}
+#endif
include/linux/of_pci.h +4 -0
index bb115de..33e8ead 100644
@@ -11,4 +11,8 @@ struct device_node;
 struct device_node *of_pci_find_child_device(struct device_node *parent,
 					     unsigned int devfn);
 
+struct pci_controller;
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
 #endif
Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#3 lore raw

Re: [PATCH v6 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC

Quoted 6 lines · Thomas Petazzoni

Michal, Ben,

Would you have some time to look at this patch and give your comments and/or ACK ? Since it touches the PowerPC and Microblaze core code, we need your agreement to merge this code, and quite a bit of code pending for 3.10 depends on this patch.

I'm currently still on vacation. I will be able to look at this after I'm back in about a week.

Quoted 7 lines

Rob, alternatively, could we imagine doing a different version of the 'of/pci: Provide support for parsing PCI DT ranges property' that introduces the new API only, leaving the PowerPC and Microblaze rework as follow-up efforts, so that all the PCIe drivers that depend on this patch can get in for 3.10 ? I'd find it pretty sad if the Marvell PCIe driver that has been worked on since 4+ months does not get into 3.10 just because this patch cannot be merged.

Cheers,
Ben.

Quoted 706 lines

Thanks!

Thomas

Quoted 698 lines · Andrew Murray

The pci_process_bridge_OF_ranges function, used to parse the "ranges" property of a PCI host device, is found in both Microblaze and PowerPC architectures. These implementations are nearly identical. This patch moves this common code to a common place.

---
 arch/microblaze/include/asm/pci-bridge.h |    5 +-
 arch/microblaze/pci/pci-common.c         |  192 ----------------------------
 arch/powerpc/include/asm/pci-bridge.h    |    5 +-
 arch/powerpc/kernel/pci-common.c         |  192 ----------------------------
 drivers/of/of_pci.c                      |  200 ++++++++++++++++++++++++++++++
 include/linux/of_pci.h                   |    4 +
 6 files changed, 206 insertions(+), 392 deletions(-)
arch/microblaze/include/asm/pci-bridge.h +1 -4
index cb5d397..5783cd6 100644
@@ -10,6 +10,7 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/of_pci.h>
 
 struct device_node;
 
@@ -132,10 +133,6 @@ extern void setup_indirect_pci(struct pci_controller *hose,
 extern struct pci_controller *pci_find_hose_for_OF_device(
 			struct device_node *node);
 
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
 /* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
arch/microblaze/pci/pci-common.c +0 -192
index 9ea521e..2735ad9 100644
@@ -622,198 +622,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 	*end = rsrc->end - offset;
 }
 
-/**
- * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
- * @hose: newly allocated pci_controller to be setup
- * @dev: device node of the host bridge
- * @primary: set if primary bus (32 bits only, soon to be deprecated)
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping of a pci controller based on its
- * content.
- *
- * Life would be boring if it wasn't for a few issues that we have to deal
- * with here:
- *
- *   - We can only cope with one IO space range and up to 3 Memory space
- *     ranges. However, some machines (thanks Apple !) tend to split their
- *     space into lots of small contiguous ranges. So we have to coalesce.
- *
- *   - We can only cope with all memory ranges having the same offset
- *     between CPU addresses and PCI addresses. Unfortunately, some bridges
- *     are setup for a large 1:1 mapping along with a small "window" which
- *     maps PCI address 0 to some arbitrary high address of the CPU space in
- *     order to give access to the ISA memory hole.
- *     The way out of here that I've chosen for now is to always set the
- *     offset based on the first resource found, then override it if we
- *     have a different offset and the previous was set by an ISA hole.
- *
- *   - Some busses have IO space not starting at 0, which causes trouble with
- *     the way we do our IO resource renumbering. The code somewhat deals with
- *     it for 64 bits but I would expect problems on 32 bits.
- *
- *   - Some 32 bits platforms such as 4xx can have physical space larger than
- *     32 bits so we need to use 64 bits values for the parsing
- */
-void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-				  struct device_node *dev, int primary)
-{
-	const u32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
-	int memno = 0, isa_hole = -1;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
-	unsigned long long isa_mb = 0;
-	struct resource *res;
-
-	pr_info("PCI host bridge %s %s ranges:\n",
-	       dev->full_name, primary ? "(primary)" : "");
-
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
-
-	/* Parse it */
-	pr_debug("Parsing ranges property...\n");
-	while ((rlen -= np * 4) >= 0) {
-		/* Read next ranges element */
-		pci_space = ranges[0];
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-
-		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
-				pci_space, pci_addr);
-		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
-					cpu_addr, size);
-
-		ranges += np;
-
-		/* If we failed translation or got a zero-sized region
-		 * (some FW try to feed us with non sensical zero sized regions
-		 * such as power3 which look like some kind of attempt
-		 * at exposing the VGA memory hole)
-		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
-			continue;
-
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
-		/* Act based on address space type */
-		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
-			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
-
-			/* We support only one IO range */
-			if (hose->pci_io_size) {
-				pr_info(" \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
-
-			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
-
-			/* Expect trouble if pci_addr is not 0 */
-			if (primary)
-				isa_io_base =
-					(unsigned long)hose->io_base_virt;
-			/* pci_io_size and io_base_phys always represent IO
-			 * space starting at 0 so we factor in pci_addr
-			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
-
-			/* Build resource */
-			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
-			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
-
-			/* We support only 3 memory ranges */
-			if (memno >= 3) {
-				pr_info(" \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
-				isa_mb = cpu_addr;
-				isa_hole = memno;
-				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
-			}
-
-			/* We get the PCI/Mem offset from the first range or
-			 * the, current one if the offset came from an ISA
-			 * hole. If they don't match, bugger.
-			 */
-			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
-			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
-			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
-				pr_info(" \\--> Skipped (offset mismatch) !\n");
-				continue;
-			}
-
-			/* Build resource */
-			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
-	}
-
-	/* If there's an ISA hole and the pci_mem_offset is -not- matching
-	 * the ISA hole offset, then we need to remove the ISA hole from
-	 * the resource list for that brige
-	 */
-	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
-		unsigned int next = isa_hole + 1;
-		pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
-		if (next < memno)
-			memmove(&hose->mem_resources[isa_hole],
-				&hose->mem_resources[next],
-				sizeof(struct resource) * (memno - next));
-		hose->mem_resources[--memno].flags = 0;
-	}
-}
-
 /* Decide whether to display the domain number in /proc */
 int pci_proc_domain(struct pci_bus *bus)
 {
arch/powerpc/include/asm/pci-bridge.h +1 -4
index 025a130..205bfba 100644
@@ -10,6 +10,7 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/of_pci.h>
 #include <asm-generic/pci-bridge.h>
 
 struct device_node;
@@ -231,10 +232,6 @@ extern int pcibios_map_io_space(struct pci_bus *bus);
 extern struct pci_controller *pci_find_hose_for_OF_device(
 			struct device_node* node);
 
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
 /* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
arch/powerpc/kernel/pci-common.c +0 -192
index fa12ae4..6edf396 100644
@@ -640,198 +640,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 	*end = rsrc->end - offset;
 }
 
-/**
- * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
- * @hose: newly allocated pci_controller to be setup
- * @dev: device node of the host bridge
- * @primary: set if primary bus (32 bits only, soon to be deprecated)
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping of a pci controller based on its
- * content.
- *
- * Life would be boring if it wasn't for a few issues that we have to deal
- * with here:
- *
- *   - We can only cope with one IO space range and up to 3 Memory space
- *     ranges. However, some machines (thanks Apple !) tend to split their
- *     space into lots of small contiguous ranges. So we have to coalesce.
- *
- *   - We can only cope with all memory ranges having the same offset
- *     between CPU addresses and PCI addresses. Unfortunately, some bridges
- *     are setup for a large 1:1 mapping along with a small "window" which
- *     maps PCI address 0 to some arbitrary high address of the CPU space in
- *     order to give access to the ISA memory hole.
- *     The way out of here that I've chosen for now is to always set the
- *     offset based on the first resource found, then override it if we
- *     have a different offset and the previous was set by an ISA hole.
- *
- *   - Some busses have IO space not starting at 0, which causes trouble with
- *     the way we do our IO resource renumbering. The code somewhat deals with
- *     it for 64 bits but I would expect problems on 32 bits.
- *
- *   - Some 32 bits platforms such as 4xx can have physical space larger than
- *     32 bits so we need to use 64 bits values for the parsing
- */
-void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-				  struct device_node *dev, int primary)
-{
-	const u32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
-	int memno = 0, isa_hole = -1;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
-	unsigned long long isa_mb = 0;
-	struct resource *res;
-
-	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
-	       dev->full_name, primary ? "(primary)" : "");
-
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
-
-	/* Parse it */
-	while ((rlen -= np * 4) >= 0) {
-		/* Read next ranges element */
-		pci_space = ranges[0];
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-		ranges += np;
-
-		/* If we failed translation or got a zero-sized region
-		 * (some FW try to feed us with non sensical zero sized regions
-		 * such as power3 which look like some kind of attempt at exposing
-		 * the VGA memory hole)
-		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
-			continue;
-
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
-		/* Act based on address space type */
-		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
-			printk(KERN_INFO
-			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
-
-			/* We support only one IO range */
-			if (hose->pci_io_size) {
-				printk(KERN_INFO
-				       " \\--> Skipped (too many) !\n");
-				continue;
-			}
-#ifdef CONFIG_PPC32
-			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
-
-			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
-
-			/* Expect trouble if pci_addr is not 0 */
-			if (primary)
-				isa_io_base =
-					(unsigned long)hose->io_base_virt;
-#endif /* CONFIG_PPC32 */
-			/* pci_io_size and io_base_phys always represent IO
-			 * space starting at 0 so we factor in pci_addr
-			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
-
-			/* Build resource */
-			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
-			printk(KERN_INFO
-			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
-
-			/* We support only 3 memory ranges */
-			if (memno >= 3) {
-				printk(KERN_INFO
-				       " \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
-				isa_mb = cpu_addr;
-				isa_hole = memno;
-				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
-			}
-
-			/* We get the PCI/Mem offset from the first range or
-			 * the, current one if the offset came from an ISA
-			 * hole. If they don't match, bugger.
-			 */
-			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
-			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
-			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
-				printk(KERN_INFO
-				       " \\--> Skipped (offset mismatch) !\n");
-				continue;
-			}
-
-			/* Build resource */
-			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
-	}
-
-	/* If there's an ISA hole and the pci_mem_offset is -not- matching
-	 * the ISA hole offset, then we need to remove the ISA hole from
-	 * the resource list for that brige
-	 */
-	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
-		unsigned int next = isa_hole + 1;
-		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
-		if (next < memno)
-			memmove(&hose->mem_resources[isa_hole],
-				&hose->mem_resources[next],
-				sizeof(struct resource) * (memno - next));
-		hose->mem_resources[--memno].flags = 0;
-	}
-}
-
 /* Decide whether to display the domain number in /proc */
 int pci_proc_domain(struct pci_bus *bus)
 {
drivers/of/of_pci.c +200 -0
index 13e37e2..1626172 100644
@@ -4,6 +4,10 @@
 #include <linux/of_pci.h>
 #include <asm/prom.h>
 
+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
+#include <asm/pci-bridge.h>
+#endif
+
 static inline int __of_pci_pci_compare(struct device_node *node,
 				       unsigned int devfn)
 {
@@ -40,3 +44,199 @@ struct device_node *of_pci_find_child_device(struct device_node *parent,
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(of_pci_find_child_device);
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ *   - We can only cope with one IO space range and up to 3 Memory space
+ *     ranges. However, some machines (thanks Apple !) tend to split their
+ *     space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ *   - We can only cope with all memory ranges having the same offset
+ *     between CPU addresses and PCI addresses. Unfortunately, some bridges
+ *     are setup for a large 1:1 mapping along with a small "window" which
+ *     maps PCI address 0 to some arbitrary high address of the CPU space in
+ *     order to give access to the ISA memory hole.
+ *     The way out of here that I've chosen for now is to always set the
+ *     offset based on the first resource found, then override it if we
+ *     have a different offset and the previous was set by an ISA hole.
+ *
+ *   - Some busses have IO space not starting at 0, which causes trouble with
+ *     the way we do our IO resource renumbering. The code somewhat deals with
+ *     it for 64 bits but I would expect problems on 32 bits.
+ *
+ *   - Some 32 bits platforms such as 4xx can have physical space larger than
+ *     32 bits so we need to use 64 bits values for the parsing
+ */
+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+				  struct device_node *dev, int primary)
+{
+	const u32 *ranges;
+	int rlen;
+	int pna = of_n_addr_cells(dev);
+	int np = pna + 5;
+	int memno = 0, isa_hole = -1;
+	u32 pci_space;
+	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
+	unsigned long long isa_mb = 0;
+	struct resource *res;
+
+	pr_info("PCI host bridge %s %s ranges:\n",
+	       dev->full_name, primary ? "(primary)" : "");
+
+	/* Get ranges property */
+	ranges = of_get_property(dev, "ranges", &rlen);
+	if (ranges == NULL)
+		return;
+
+	/* Parse it */
+	pr_debug("Parsing ranges property...\n");
+	while ((rlen -= np * 4) >= 0) {
+		/* Read next ranges element */
+		pci_space = ranges[0];
+		pci_addr = of_read_number(ranges + 1, 2);
+		cpu_addr = of_translate_address(dev, ranges + 3);
+		size = of_read_number(ranges + pna + 3, 2);
+
+		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
+				pci_space, pci_addr);
+		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
+					cpu_addr, size);
+
+		ranges += np;
+
+		/* If we failed translation or got a zero-sized region
+		 * (some FW try to feed us with non sensical zero sized regions
+		 * such as power3 which look like some kind of attempt
+		 * at exposing the VGA memory hole)
+		 */
+		if (cpu_addr == OF_BAD_ADDR || size == 0)
+			continue;
+
+		/* Now consume following elements while they are contiguous */
+		for (; rlen >= np * sizeof(u32);
+		     ranges += np, rlen -= np * 4) {
+			if (ranges[0] != pci_space)
+				break;
+			pci_next = of_read_number(ranges + 1, 2);
+			cpu_next = of_translate_address(dev, ranges + 3);
+			if (pci_next != pci_addr + size ||
+			    cpu_next != cpu_addr + size)
+				break;
+			size += of_read_number(ranges + pna + 3, 2);
+		}
+
+		/* Act based on address space type */
+		res = NULL;
+		switch ((pci_space >> 24) & 0x3) {
+		case 1:		/* PCI IO space */
+			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr);
+
+			/* We support only one IO range */
+			if (hose->pci_io_size) {
+				pr_info(" \\--> Skipped (too many) !\n");
+				continue;
+			}
+#if (!IS_ENABLED(CONFIG_64BIT))
+			/* On 32 bits, limit I/O space to 16MB */
+			if (size > 0x01000000)
+				size = 0x01000000;
+
+			/* 32 bits needs to map IOs here */
+			hose->io_base_virt = ioremap(cpu_addr, size);
+
+			/* Expect trouble if pci_addr is not 0 */
+			if (primary)
+				isa_io_base =
+					(unsigned long)hose->io_base_virt;
+#endif /* !CONFIG_64BIT */
+			/* pci_io_size and io_base_phys always represent IO
+			 * space starting at 0 so we factor in pci_addr
+			 */
+			hose->pci_io_size = pci_addr + size;
+			hose->io_base_phys = cpu_addr - pci_addr;
+
+			/* Build resource */
+			res = &hose->io_resource;
+			res->flags = IORESOURCE_IO;
+			res->start = pci_addr;
+			break;
+		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
+			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr,
+			       (pci_space & 0x40000000) ? "Prefetch" : "");
+
+			/* We support only 3 memory ranges */
+			if (memno >= 3) {
+				pr_info(" \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* Handles ISA memory hole space here */
+			if (pci_addr == 0) {
+				isa_mb = cpu_addr;
+				isa_hole = memno;
+				if (primary || isa_mem_base == 0)
+					isa_mem_base = cpu_addr;
+				hose->isa_mem_phys = cpu_addr;
+				hose->isa_mem_size = size;
+			}
+
+			/* We get the PCI/Mem offset from the first range or
+			 * the, current one if the offset came from an ISA
+			 * hole. If they don't match, bugger.
+			 */
+			if (memno == 0 ||
+			    (isa_hole >= 0 && pci_addr != 0 &&
+			     hose->pci_mem_offset == isa_mb))
+				hose->pci_mem_offset = cpu_addr - pci_addr;
+			else if (pci_addr != 0 &&
+				 hose->pci_mem_offset != cpu_addr - pci_addr) {
+				pr_info(" \\--> Skipped (offset mismatch) !\n");
+				continue;
+			}
+
+			/* Build resource */
+			res = &hose->mem_resources[memno++];
+			res->flags = IORESOURCE_MEM;
+			if (pci_space & 0x40000000)
+				res->flags |= IORESOURCE_PREFETCH;
+			res->start = cpu_addr;
+			break;
+		}
+		if (res != NULL) {
+			res->name = dev->full_name;
+			res->end = res->start + size - 1;
+			res->parent = NULL;
+			res->sibling = NULL;
+			res->child = NULL;
+		}
+	}
+
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
+	}
+}
+#endif
include/linux/of_pci.h +4 -0
index bb115de..33e8ead 100644
@@ -11,4 +11,8 @@ struct device_node;
 struct device_node *of_pci_find_child_device(struct device_node *parent,
 					     unsigned int devfn);
 
+struct pci_controller;
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
 #endif
maintainer Acked-by
#4 lore raw

Re: [PATCH v6 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC

In reply to Thomas Petazzoni

Hi Thomas and Andrew,

First of all I would recommend you to add your tree to 0-day testing system where you can easily catch up compilation failures for microblaze and others.

Getting this compilation failure:
drivers/of/of_pci.c: In function 'pci_process_bridge_OF_ranges':
drivers/of/of_pci.c:88:22: error: storage size of 'range' isn't known
drivers/of/of_pci.c:89:29: error: storage size of 'parser' isn't known
drivers/of/of_pci.c:96:2: error: implicit declaration of function 'of_pci_range_parser' [-Werror=implicit-function-declaration] drivers/of/of_pci.c:100:2: error: implicit declaration of function 'for_each_of_pci_range' [-Werror=implicit-function-declaration] drivers/of/of_pci.c:100:41: error: expected ';' before '{' token
drivers/of/of_pci.c:90:6: warning: unused variable 'res_type' [-Wunused-variable]
drivers/of/of_pci.c:89:29: warning: unused variable 'parser' [-Wunused-variable]
drivers/of/of_pci.c:88:22: warning: unused variable 'range' [-Wunused-variable]
drivers/of/of_pci.c:87:19: warning: unused variable 'res' [-Wunused-variable]
drivers/of/of_pci.c:86:21: warning: unused variable 'isa_mb' [-Wunused-variable]
drivers/of/of_pci.c:85:17: warning: unused variable 'isa_hole' [-Wunused-variable]
drivers/of/of_pci.c:85:6: warning: unused variable 'memno' [-Wunused-variable]

which is caused missing linux/of_addresss.h in of_pci.c.
PowerPC probably won't have this problem because you have this header in asm/prom.h but based on the same comment it is better to add it directly to the files.

That's why please add this header to this patch.

drivers/of/of_pci.c +1 -0
index 3e428a1..f30887e 100644
@@ -1,6 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_pci.h>
 #include <asm/prom.h>
 

When you fix it:

Thanks,
Michal

Quoted 721 lines · Thomas Petazzoni

Michal, Ben,

Would you have some time to look at this patch and give your comments and/or ACK ? Since it touches the PowerPC and Microblaze core code, we need your agreement to merge this code, and quite a bit of code pending for 3.10 depends on this patch.

Rob, alternatively, could we imagine doing a different version of the 'of/pci: Provide support for parsing PCI DT ranges property' that introduces the new API only, leaving the PowerPC and Microblaze rework as follow-up efforts, so that all the PCIe drivers that depend on this patch can get in for 3.10 ? I'd find it pretty sad if the Marvell PCIe driver that has been worked on since 4+ months does not get into 3.10 just because this patch cannot be merged.

Thanks!

Thomas

Quoted 698 lines · Andrew Murray

The pci_process_bridge_OF_ranges function, used to parse the "ranges" property of a PCI host device, is found in both Microblaze and PowerPC architectures. These implementations are nearly identical. This patch moves this common code to a common place.

---
 arch/microblaze/include/asm/pci-bridge.h |    5 +-
 arch/microblaze/pci/pci-common.c         |  192 ----------------------------
 arch/powerpc/include/asm/pci-bridge.h    |    5 +-
 arch/powerpc/kernel/pci-common.c         |  192 ----------------------------
 drivers/of/of_pci.c                      |  200 ++++++++++++++++++++++++++++++
 include/linux/of_pci.h                   |    4 +
 6 files changed, 206 insertions(+), 392 deletions(-)
arch/microblaze/include/asm/pci-bridge.h +1 -4
index cb5d397..5783cd6 100644
@@ -10,6 +10,7 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/of_pci.h>
 
 struct device_node;
 
@@ -132,10 +133,6 @@ extern void setup_indirect_pci(struct pci_controller *hose,
 extern struct pci_controller *pci_find_hose_for_OF_device(
 			struct device_node *node);
 
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
 /* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
arch/microblaze/pci/pci-common.c +0 -192
index 9ea521e..2735ad9 100644
@@ -622,198 +622,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 	*end = rsrc->end - offset;
 }
 
-/**
- * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
- * @hose: newly allocated pci_controller to be setup
- * @dev: device node of the host bridge
- * @primary: set if primary bus (32 bits only, soon to be deprecated)
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping of a pci controller based on its
- * content.
- *
- * Life would be boring if it wasn't for a few issues that we have to deal
- * with here:
- *
- *   - We can only cope with one IO space range and up to 3 Memory space
- *     ranges. However, some machines (thanks Apple !) tend to split their
- *     space into lots of small contiguous ranges. So we have to coalesce.
- *
- *   - We can only cope with all memory ranges having the same offset
- *     between CPU addresses and PCI addresses. Unfortunately, some bridges
- *     are setup for a large 1:1 mapping along with a small "window" which
- *     maps PCI address 0 to some arbitrary high address of the CPU space in
- *     order to give access to the ISA memory hole.
- *     The way out of here that I've chosen for now is to always set the
- *     offset based on the first resource found, then override it if we
- *     have a different offset and the previous was set by an ISA hole.
- *
- *   - Some busses have IO space not starting at 0, which causes trouble with
- *     the way we do our IO resource renumbering. The code somewhat deals with
- *     it for 64 bits but I would expect problems on 32 bits.
- *
- *   - Some 32 bits platforms such as 4xx can have physical space larger than
- *     32 bits so we need to use 64 bits values for the parsing
- */
-void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-				  struct device_node *dev, int primary)
-{
-	const u32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
-	int memno = 0, isa_hole = -1;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
-	unsigned long long isa_mb = 0;
-	struct resource *res;
-
-	pr_info("PCI host bridge %s %s ranges:\n",
-	       dev->full_name, primary ? "(primary)" : "");
-
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
-
-	/* Parse it */
-	pr_debug("Parsing ranges property...\n");
-	while ((rlen -= np * 4) >= 0) {
-		/* Read next ranges element */
-		pci_space = ranges[0];
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-
-		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
-				pci_space, pci_addr);
-		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
-					cpu_addr, size);
-
-		ranges += np;
-
-		/* If we failed translation or got a zero-sized region
-		 * (some FW try to feed us with non sensical zero sized regions
-		 * such as power3 which look like some kind of attempt
-		 * at exposing the VGA memory hole)
-		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
-			continue;
-
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
-		/* Act based on address space type */
-		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
-			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
-
-			/* We support only one IO range */
-			if (hose->pci_io_size) {
-				pr_info(" \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
-
-			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
-
-			/* Expect trouble if pci_addr is not 0 */
-			if (primary)
-				isa_io_base =
-					(unsigned long)hose->io_base_virt;
-			/* pci_io_size and io_base_phys always represent IO
-			 * space starting at 0 so we factor in pci_addr
-			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
-
-			/* Build resource */
-			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
-			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
-
-			/* We support only 3 memory ranges */
-			if (memno >= 3) {
-				pr_info(" \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
-				isa_mb = cpu_addr;
-				isa_hole = memno;
-				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
-			}
-
-			/* We get the PCI/Mem offset from the first range or
-			 * the, current one if the offset came from an ISA
-			 * hole. If they don't match, bugger.
-			 */
-			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
-			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
-			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
-				pr_info(" \\--> Skipped (offset mismatch) !\n");
-				continue;
-			}
-
-			/* Build resource */
-			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
-	}
-
-	/* If there's an ISA hole and the pci_mem_offset is -not- matching
-	 * the ISA hole offset, then we need to remove the ISA hole from
-	 * the resource list for that brige
-	 */
-	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
-		unsigned int next = isa_hole + 1;
-		pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
-		if (next < memno)
-			memmove(&hose->mem_resources[isa_hole],
-				&hose->mem_resources[next],
-				sizeof(struct resource) * (memno - next));
-		hose->mem_resources[--memno].flags = 0;
-	}
-}
-
 /* Decide whether to display the domain number in /proc */
 int pci_proc_domain(struct pci_bus *bus)
 {
arch/powerpc/include/asm/pci-bridge.h +1 -4
index 025a130..205bfba 100644
@@ -10,6 +10,7 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/of_pci.h>
 #include <asm-generic/pci-bridge.h>
 
 struct device_node;
@@ -231,10 +232,6 @@ extern int pcibios_map_io_space(struct pci_bus *bus);
 extern struct pci_controller *pci_find_hose_for_OF_device(
 			struct device_node* node);
 
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
 /* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
arch/powerpc/kernel/pci-common.c +0 -192
index fa12ae4..6edf396 100644
@@ -640,198 +640,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 	*end = rsrc->end - offset;
 }
 
-/**
- * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
- * @hose: newly allocated pci_controller to be setup
- * @dev: device node of the host bridge
- * @primary: set if primary bus (32 bits only, soon to be deprecated)
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping of a pci controller based on its
- * content.
- *
- * Life would be boring if it wasn't for a few issues that we have to deal
- * with here:
- *
- *   - We can only cope with one IO space range and up to 3 Memory space
- *     ranges. However, some machines (thanks Apple !) tend to split their
- *     space into lots of small contiguous ranges. So we have to coalesce.
- *
- *   - We can only cope with all memory ranges having the same offset
- *     between CPU addresses and PCI addresses. Unfortunately, some bridges
- *     are setup for a large 1:1 mapping along with a small "window" which
- *     maps PCI address 0 to some arbitrary high address of the CPU space in
- *     order to give access to the ISA memory hole.
- *     The way out of here that I've chosen for now is to always set the
- *     offset based on the first resource found, then override it if we
- *     have a different offset and the previous was set by an ISA hole.
- *
- *   - Some busses have IO space not starting at 0, which causes trouble with
- *     the way we do our IO resource renumbering. The code somewhat deals with
- *     it for 64 bits but I would expect problems on 32 bits.
- *
- *   - Some 32 bits platforms such as 4xx can have physical space larger than
- *     32 bits so we need to use 64 bits values for the parsing
- */
-void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-				  struct device_node *dev, int primary)
-{
-	const u32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
-	int memno = 0, isa_hole = -1;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
-	unsigned long long isa_mb = 0;
-	struct resource *res;
-
-	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
-	       dev->full_name, primary ? "(primary)" : "");
-
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
-
-	/* Parse it */
-	while ((rlen -= np * 4) >= 0) {
-		/* Read next ranges element */
-		pci_space = ranges[0];
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-		ranges += np;
-
-		/* If we failed translation or got a zero-sized region
-		 * (some FW try to feed us with non sensical zero sized regions
-		 * such as power3 which look like some kind of attempt at exposing
-		 * the VGA memory hole)
-		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
-			continue;
-
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
-		/* Act based on address space type */
-		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
-			printk(KERN_INFO
-			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
-
-			/* We support only one IO range */
-			if (hose->pci_io_size) {
-				printk(KERN_INFO
-				       " \\--> Skipped (too many) !\n");
-				continue;
-			}
-#ifdef CONFIG_PPC32
-			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
-
-			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
-
-			/* Expect trouble if pci_addr is not 0 */
-			if (primary)
-				isa_io_base =
-					(unsigned long)hose->io_base_virt;
-#endif /* CONFIG_PPC32 */
-			/* pci_io_size and io_base_phys always represent IO
-			 * space starting at 0 so we factor in pci_addr
-			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
-
-			/* Build resource */
-			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
-			printk(KERN_INFO
-			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
-
-			/* We support only 3 memory ranges */
-			if (memno >= 3) {
-				printk(KERN_INFO
-				       " \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
-				isa_mb = cpu_addr;
-				isa_hole = memno;
-				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
-			}
-
-			/* We get the PCI/Mem offset from the first range or
-			 * the, current one if the offset came from an ISA
-			 * hole. If they don't match, bugger.
-			 */
-			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
-			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
-			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
-				printk(KERN_INFO
-				       " \\--> Skipped (offset mismatch) !\n");
-				continue;
-			}
-
-			/* Build resource */
-			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
-	}
-
-	/* If there's an ISA hole and the pci_mem_offset is -not- matching
-	 * the ISA hole offset, then we need to remove the ISA hole from
-	 * the resource list for that brige
-	 */
-	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
-		unsigned int next = isa_hole + 1;
-		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
-		if (next < memno)
-			memmove(&hose->mem_resources[isa_hole],
-				&hose->mem_resources[next],
-				sizeof(struct resource) * (memno - next));
-		hose->mem_resources[--memno].flags = 0;
-	}
-}
-
 /* Decide whether to display the domain number in /proc */
 int pci_proc_domain(struct pci_bus *bus)
 {
drivers/of/of_pci.c +200 -0
index 13e37e2..1626172 100644
@@ -4,6 +4,10 @@
 #include <linux/of_pci.h>
 #include <asm/prom.h>
 
+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
+#include <asm/pci-bridge.h>
+#endif
+
 static inline int __of_pci_pci_compare(struct device_node *node,
 				       unsigned int devfn)
 {
@@ -40,3 +44,199 @@ struct device_node *of_pci_find_child_device(struct device_node *parent,
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(of_pci_find_child_device);
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ *   - We can only cope with one IO space range and up to 3 Memory space
+ *     ranges. However, some machines (thanks Apple !) tend to split their
+ *     space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ *   - We can only cope with all memory ranges having the same offset
+ *     between CPU addresses and PCI addresses. Unfortunately, some bridges
+ *     are setup for a large 1:1 mapping along with a small "window" which
+ *     maps PCI address 0 to some arbitrary high address of the CPU space in
+ *     order to give access to the ISA memory hole.
+ *     The way out of here that I've chosen for now is to always set the
+ *     offset based on the first resource found, then override it if we
+ *     have a different offset and the previous was set by an ISA hole.
+ *
+ *   - Some busses have IO space not starting at 0, which causes trouble with
+ *     the way we do our IO resource renumbering. The code somewhat deals with
+ *     it for 64 bits but I would expect problems on 32 bits.
+ *
+ *   - Some 32 bits platforms such as 4xx can have physical space larger than
+ *     32 bits so we need to use 64 bits values for the parsing
+ */
+#if defined(CONFIG_PPC32) || defined(CONFIG_PPC64) || defined(CONFIG_MICROBLAZE)
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+				  struct device_node *dev, int primary)
+{
+	const u32 *ranges;
+	int rlen;
+	int pna = of_n_addr_cells(dev);
+	int np = pna + 5;
+	int memno = 0, isa_hole = -1;
+	u32 pci_space;
+	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
+	unsigned long long isa_mb = 0;
+	struct resource *res;
+
+	pr_info("PCI host bridge %s %s ranges:\n",
+	       dev->full_name, primary ? "(primary)" : "");
+
+	/* Get ranges property */
+	ranges = of_get_property(dev, "ranges", &rlen);
+	if (ranges == NULL)
+		return;
+
+	/* Parse it */
+	pr_debug("Parsing ranges property...\n");
+	while ((rlen -= np * 4) >= 0) {
+		/* Read next ranges element */
+		pci_space = ranges[0];
+		pci_addr = of_read_number(ranges + 1, 2);
+		cpu_addr = of_translate_address(dev, ranges + 3);
+		size = of_read_number(ranges + pna + 3, 2);
+
+		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
+				pci_space, pci_addr);
+		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
+					cpu_addr, size);
+
+		ranges += np;
+
+		/* If we failed translation or got a zero-sized region
+		 * (some FW try to feed us with non sensical zero sized regions
+		 * such as power3 which look like some kind of attempt
+		 * at exposing the VGA memory hole)
+		 */
+		if (cpu_addr == OF_BAD_ADDR || size == 0)
+			continue;
+
+		/* Now consume following elements while they are contiguous */
+		for (; rlen >= np * sizeof(u32);
+		     ranges += np, rlen -= np * 4) {
+			if (ranges[0] != pci_space)
+				break;
+			pci_next = of_read_number(ranges + 1, 2);
+			cpu_next = of_translate_address(dev, ranges + 3);
+			if (pci_next != pci_addr + size ||
+			    cpu_next != cpu_addr + size)
+				break;
+			size += of_read_number(ranges + pna + 3, 2);
+		}
+
+		/* Act based on address space type */
+		res = NULL;
+		switch ((pci_space >> 24) & 0x3) {
+		case 1:		/* PCI IO space */
+			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr);
+
+			/* We support only one IO range */
+			if (hose->pci_io_size) {
+				pr_info(" \\--> Skipped (too many) !\n");
+				continue;
+			}
+#if (!IS_ENABLED(CONFIG_64BIT))
+			/* On 32 bits, limit I/O space to 16MB */
+			if (size > 0x01000000)
+				size = 0x01000000;
+
+			/* 32 bits needs to map IOs here */
+			hose->io_base_virt = ioremap(cpu_addr, size);
+
+			/* Expect trouble if pci_addr is not 0 */
+			if (primary)
+				isa_io_base =
+					(unsigned long)hose->io_base_virt;
+#endif /* !CONFIG_64BIT */
+			/* pci_io_size and io_base_phys always represent IO
+			 * space starting at 0 so we factor in pci_addr
+			 */
+			hose->pci_io_size = pci_addr + size;
+			hose->io_base_phys = cpu_addr - pci_addr;
+
+			/* Build resource */
+			res = &hose->io_resource;
+			res->flags = IORESOURCE_IO;
+			res->start = pci_addr;
+			break;
+		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
+			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr,
+			       (pci_space & 0x40000000) ? "Prefetch" : "");
+
+			/* We support only 3 memory ranges */
+			if (memno >= 3) {
+				pr_info(" \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* Handles ISA memory hole space here */
+			if (pci_addr == 0) {
+				isa_mb = cpu_addr;
+				isa_hole = memno;
+				if (primary || isa_mem_base == 0)
+					isa_mem_base = cpu_addr;
+				hose->isa_mem_phys = cpu_addr;
+				hose->isa_mem_size = size;
+			}
+
+			/* We get the PCI/Mem offset from the first range or
+			 * the, current one if the offset came from an ISA
+			 * hole. If they don't match, bugger.
+			 */
+			if (memno == 0 ||
+			    (isa_hole >= 0 && pci_addr != 0 &&
+			     hose->pci_mem_offset == isa_mb))
+				hose->pci_mem_offset = cpu_addr - pci_addr;
+			else if (pci_addr != 0 &&
+				 hose->pci_mem_offset != cpu_addr - pci_addr) {
+				pr_info(" \\--> Skipped (offset mismatch) !\n");
+				continue;
+			}
+
+			/* Build resource */
+			res = &hose->mem_resources[memno++];
+			res->flags = IORESOURCE_MEM;
+			if (pci_space & 0x40000000)
+				res->flags |= IORESOURCE_PREFETCH;
+			res->start = cpu_addr;
+			break;
+		}
+		if (res != NULL) {
+			res->name = dev->full_name;
+			res->end = res->start + size - 1;
+			res->parent = NULL;
+			res->sibling = NULL;
+			res->child = NULL;
+		}
+	}
+
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
+	}
+}
+#endif
include/linux/of_pci.h +4 -0
index bb115de..33e8ead 100644
@@ -11,4 +11,8 @@ struct device_node;
 struct device_node *of_pci_find_child_device(struct device_node *parent,
 					     unsigned int devfn);
 
+struct pci_controller;
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
 #endif
Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID:
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
#5 lore raw

PATCH v6 1/3 of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC

Quoted 15 lines · Michal Simek

That's why please add this header to this patch.

drivers/of/of_pci.c +1 -0
index 3e428a1..f30887e 100644
@@ -1,6 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_pci.h>
 #include <asm/prom.h>
 
Quoted 2 lines

When you fix it:

I've added this fix to the latest patchset (v7) and also your Ack - thanks for your feedback (and the robot...).

Andrew Murray

#6 lore raw

PATCH v6 2/3 of/pci: Provide support for parsing PCI DT ranges property

In reply to Andrew Murray

This patch factors out common implementation patterns to reduce overall kernel code and provide a means for host bridge drivers to directly obtain struct resources from the DT's ranges property without relying on architecture specific DT handling. This will make it easier to write archiecture independent host bridge drivers and mitigate against further duplication of DT parsing code.

This patch can be used in the following way:

	struct of_pci_range_parser parser;
	struct of_pci_range range;

	if (of_pci_range_parser(&parser, np))
		; //no ranges property

	for_each_of_pci_range(&parser, &range) {

		/*
			directly access properties of the address range, e.g.:
			range.pci_space, range.pci_addr, range.cpu_addr,
			range.size, range.flags

			alternatively obtain a struct resource, e.g.:
			struct resource res;
			of_pci_range_to_resource(&range, np, &res);
		*/
	}

Additionally the implementation takes care of adjacent ranges and merges them into a single range (as was the case with powerpc and microblaze).

---
 drivers/of/address.c       |   66 ++++++++++++++++++++++++++
 drivers/of/of_pci.c        |  112 ++++++++++++++++----------------------------
 include/linux/of_address.h |   46 ++++++++++++++++++
 3 files changed, 152 insertions(+), 72 deletions(-)
drivers/of/address.c +66 -0
index 04da786..d3c4f2f 100644
@@ -227,6 +227,72 @@ int of_pci_address_to_resource(struct device_node *dev, int bar,
 	return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
 }
 EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+int of_pci_range_parser(struct of_pci_range_parser *parser,
+			struct device_node *node)
+{
+	const int na = 3, ns = 2;
+	int rlen;
+
+	parser->node = node;
+	parser->pna = of_n_addr_cells(node);
+	parser->np = parser->pna + na + ns;
+
+	parser->range = of_get_property(node, "ranges", &rlen);
+	if (parser->range == NULL)
+		return -ENOENT;
+
+	parser->end = parser->range + rlen / sizeof(__be32);
+
+	return 0;
+}
+
+struct of_pci_range *of_pci_process_ranges(struct of_pci_range_parser *parser,
+						struct of_pci_range *range)
+{
+	const int na = 3, ns = 2;
+
+	if (!range)
+		return NULL;
+
+	if (!parser->range || parser->range + parser->np > parser->end)
+		return NULL;
+
+	range->pci_space = parser->range[0];
+	range->flags = of_bus_pci_get_flags(parser->range);
+	range->pci_addr = of_read_number(parser->range + 1, ns);
+	range->cpu_addr = of_translate_address(parser->node,
+				parser->range + na);
+	range->size = of_read_number(parser->range + parser->pna + na, ns);
+
+	parser->range += parser->np;
+
+	/* Now consume following elements while they are contiguous */
+	while (parser->range + parser->np <= parser->end) {
+		u32 flags, pci_space;
+		u64 pci_addr, cpu_addr, size;
+
+		pci_space = be32_to_cpup(parser->range);
+		flags = of_bus_pci_get_flags(parser->range);
+		pci_addr = of_read_number(parser->range + 1, ns);
+		cpu_addr = of_translate_address(parser->node,
+				parser->range + na);
+		size = of_read_number(parser->range + parser->pna + na, ns);
+
+		if (flags != range->flags)
+			break;
+		if (pci_addr != range->pci_addr + range->size ||
+		    cpu_addr != range->cpu_addr + range->size)
+			break;
+
+		range->size += size;
+		parser->range += parser->np;
+	}
+
+	return range;
+}
+EXPORT_SYMBOL_GPL(of_pci_process_ranges);
+
 #endif /* CONFIG_PCI */
 
 /*
drivers/of/of_pci.c +40 -72

180 lines not on this page · raw message

include/linux/of_address.h +46 -0

64 lines not on this page · raw message

Signature · 1 line
1.7.0.4
#7 lore raw

PATCH v6 3/3 of/pci: mips: convert to common of_pci_range_parser

In reply to Andrew Murray

This patch converts the pci_load_of_ranges function to use the new common of_pci_range_parser.

---
 arch/mips/pci/pci.c |   50 ++++++++++++++++----------------------------------
 1 files changed, 16 insertions(+), 34 deletions(-)
arch/mips/pci/pci.c +16 -34
index 0872f12..bee49a4 100644
@@ -122,51 +122,33 @@ static void pcibios_scanbus(struct pci_controller *hose)
 #ifdef CONFIG_OF
 void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
 {
-	const __be32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(node);
-	int np = pna + 5;
+	struct of_pci_range_range range;
+	struct of_pci_range_parser parser;
+	u32 res_type;
 
 	pr_info("PCI host bridge %s ranges:\n", node->full_name);
-	ranges = of_get_property(node, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
 	hose->of_node = node;
 
-	while ((rlen -= np * 4) >= 0) {
-		u32 pci_space;
+	if (of_pci_range_parser(&parser, node))
+		return;
+
+	for_each_of_pci_range(&parser, &range) {
 		struct resource *res = NULL;
-		u64 addr, size;
-
-		pci_space = be32_to_cpup(&ranges[0]);
-		addr = of_translate_address(node, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-		ranges += np;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
+
+		res_type = range.flags & IORESOURCE_TYPE_BITS;
+		if (res_type == IORESOURCE_IO) {
 			pr_info("  IO 0x%016llx..0x%016llx\n",
-					addr, addr + size - 1);
+				range.addr, range.addr + range.size - 1);
 			hose->io_map_base =
-				(unsigned long)ioremap(addr, size);
+				(unsigned long)ioremap(range.addr, range.size);
 			res = hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
+		} else if (res_type == IORESOURCE_MEM) {
 			pr_info(" MEM 0x%016llx..0x%016llx\n",
-					addr, addr + size - 1);
+				range.addr, range.addr + range.size - 1);
 			res = hose->mem_resource;
-			res->flags = IORESOURCE_MEM;
-			break;
-		}
-		if (res != NULL) {
-			res->start = addr;
-			res->name = node->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
 		}
+		if (res != NULL)
+			of_pci_range_to_resource(&range, node, res);
 	}
 }
 #endif
Signature · 1 line
1.7.0.4
#8 lore raw
In reply to Andrew Murray
Quoted 9 lines · Andrew Murray

This patchset factors out duplicated code associated with parsing PCI DT "ranges" properties across the architectures and introduces a "ranges" parser. This parser "of_pci_range_parser" can be used directly by ARM host bridge drivers enabling them to obtain ranges from device trees.

I've included the Reviewed-by and Tested-by's received from v5 in this patchset, earlier versions of this patchset (v3) have been tested-by:

Quoted 7 lines

Thierry Reding <[email protected]>
Jingoo Han <[email protected]>

I believe a version of this patchset has also been tested through its inclusion in Thomas Petazzoni's Armada 370 and Armada XP SoCs PCIe support by:

Linus Walleij <[email protected]>

Yes you can add my Tested-by tag.

Yours,
Linus Walleij

#9 lore raw
In reply to Andrew Murray

Andrew Murray, Thomas,

Quoted 76 lines · Andrew Murray

This patchset factors out duplicated code associated with parsing PCI DT "ranges" properties across the architectures and introduces a "ranges" parser. This parser "of_pci_range_parser" can be used directly by ARM host bridge drivers enabling them to obtain ranges from device trees.

I've included the Reviewed-by and Tested-by's received from v5 in this patchset, earlier versions of this patchset (v3) have been tested-by:

Thierry Reding <[email protected]>
Jingoo Han <[email protected]>

I believe a version of this patchset has also been tested through its inclusion in Thomas Petazzoni's Armada 370 and Armada XP SoCs PCIe support by:

Linus Walleij <[email protected]>

I've tested that this patchset builds and runs on ARM and that it builds on PowerPC.

Compared to the v5 sent by Andrew Murray, the following changes have been made:

* Use of CONFIG_64BIT instead of CONFIG_[a32bitarch] as suggested by Rob Herring in drivers/of/of_pci.c

* Added forward declaration of struct pci_controller in linux/of_pci.h to prevent compiler warning as suggested by Thomas Petazzoni

* Improved error checking (!range check), removal of unnecessary be32_to_cpup call, improved formatting of struct of_pci_range_parser layout and replacement of macro with a static inline. All suggested by Rob Herring.

Compared to the v4 (incorrectly labelled v3) sent by Andrew Murray, the following changes have been made:

* Split the patch as suggested by Rob Herring

Compared to the v3 sent by Andrew Murray, the following changes have been made:

* Unify and move duplicate pci_process_bridge_OF_ranges functions to drivers/of/of_pci.c as suggested by Rob Herring

* Fix potential build errors with Microblaze/MIPS

Compared to "[PATCH v5 01/17] of/pci: Provide support for parsing PCI DT ranges property", the following changes have been made:

* Correct use of IORESOURCE_* as suggested by Russell King

* Improved interface and naming as suggested by Thierry Reding

Compared to the v2 sent by Andrew Murray, Thomas Petazzoni did:

* Add a memset() on the struct of_pci_range_iter when starting the for loop in for_each_pci_range(). Otherwise, with an uninitialized of_pci_range_iter, of_pci_process_ranges() may crash.

* Add parenthesis around 'res', 'np' and 'iter' in the for_each_of_pci_range macro definitions. Otherwise, passing something like &foobar as 'res' didn't work.

* Rebased on top of 3.9-rc2, which required fixing a few conflicts in the Microblaze code.

v2:
This follows on from suggestions made by Grant Likely (marc.info/?l=linux-kernel&m=136079602806328)

Andrew Murray (3):
of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and
PowerPC
of/pci: Provide support for parsing PCI DT ranges property of/pci: mips: convert to common of_pci_range_parser

Quoted 10 lines
 arch/microblaze/include/asm/pci-bridge.h |    5 +-
 arch/microblaze/pci/pci-common.c         |  192 ------------------------------
 arch/mips/pci/pci.c                      |   50 +++------
 arch/powerpc/include/asm/pci-bridge.h    |    5 +-
 arch/powerpc/kernel/pci-common.c         |  192 ------------------------------
 drivers/of/address.c                     |   66 ++++++++++
 drivers/of/of_pci.c                      |  168 ++++++++++++++++++++++++++
 include/linux/of_address.h               |   46 +++++++
 include/linux/of_pci.h                   |    4 +
 9 files changed, 302 insertions(+), 426 deletions(-)

As agreed with Rob Herring, series applied to mvebu/drivers to support mvebu pcie driver.

thx,

Jason.

#10 lore raw

v6 cover of/pci: Provide common support for PCI DT parsing

Quoted 2 lines · Jason Cooper

As agreed with Rob Herring, series applied to mvebu/drivers to support mvebu pcie driver.

Will this hit ARM SoC soon-ish so I can base a pull request for the Integrator on this stuff as well?

Yours,
Linus Walleij

#11 lore raw

v6 cover of/pci: Provide common support for PCI DT parsing

Quoted 7 lines · Linus Walleij
Quoted 2 lines · Jason Cooper

As agreed with Rob Herring, series applied to mvebu/drivers to support mvebu pcie driver.

Will this hit ARM SoC soon-ish so I can base a pull request for the Integrator on this stuff as well?

PR just sent, I'll defer to our kind overlords ;-)

thx,

Jason.

#12 lore raw
In reply to Linus Walleij
Quoted 6 lines · Linus Walleij
Quoted 1 line

As agreed with Rob Herring, series applied to mvebu/drivers to

support

Quoted 1 line

mvebu pcie driver.

Will this hit ARM SoC soon-ish so I can base a pull request for the Integrator on this stuff as well?

Do not send this series upstream (or even in -next) until it has been at least build-tested and acked by the affected architectures. AFAIK it breaks microblaze build (simple missing #include) and isn't yet tested on powerpc (I'm on vacation, maybe somebody else on linuxppc-dev can do it though).

Ben.

#13 lore raw

v6 cover of/pci: Provide common support for PCI DT parsing

Quoted 5 lines · Benjamin Herrenschmidt
Quoted 4 lines · Linus Walleij
Quoted 1 line

As agreed with Rob Herring, series applied to mvebu/drivers to

support

Quoted 1 line

mvebu pcie driver.

Quoted 8 lines
Quoted 2 lines

Will this hit ARM SoC soon-ish so I can base a pull request for the Integrator on this stuff as well?

Do not send this series upstream (or even in -next) until it has been at least build-tested and acked by the affected architectures. AFAIK it breaks microblaze build (simple missing #include) and isn't yet tested on powerpc (I'm on vacation, maybe somebody else on linuxppc-dev can do it though).

I added the missing include reference by Michal Simek for the branch at mvebu/drivers.

thx,

Jason.

#14 lore raw

Dear Jason Cooper,

Quoted 8 lines · Jason Cooper
Quoted 5 lines

Do not send this series upstream (or even in -next) until it has been at least build-tested and acked by the affected architectures. AFAIK it breaks microblaze build (simple missing #include) and isn't yet tested on powerpc (I'm on vacation, maybe somebody else on linuxppc-dev can do it though).

I added the missing include reference by Michal Simek for the branch at mvebu/drivers.

Some other build issues were reported on x86 during the night (thanks to automated build tests), and Andrew Murray has just sent a new version v7 of the patch set addressing those issues, as well as the missing include.

Also, please note that Andrew's patch set contains three patches, but the Marvell PCIe driver only requires PATCH 1/3 and PATCH 2/3.

Best regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#15 lore raw
Quoted 13 lines · Thomas Petazzoni

Dear Jason Cooper,

Quoted 8 lines · Jason Cooper
Quoted 5 lines

Do not send this series upstream (or even in -next) until it has been at least build-tested and acked by the affected architectures. AFAIK it breaks microblaze build (simple missing #include) and isn't yet tested on powerpc (I'm on vacation, maybe somebody else on linuxppc-dev can do it though).

I added the missing include reference by Michal Simek for the branch at mvebu/drivers.

Quoted 7 lines

Some other build issues were reported on x86 during the night (thanks to automated build tests), and Andrew Murray has just sent a new version v7 of the patch set addressing those issues, as well as the missing include.

Also, please note that Andrew's patch set contains three patches, but the Marvell PCIe driver only requires PATCH 1/3 and PATCH 2/3.

Ok. Thanks Andrew! Do you (AndrewM) want me to keep the series together? Or drop 3/3 from my tree? I can do either, I just need to know.

thx,

Jason.

#16 lore raw

v6 cover of/pci: Provide common support for PCI DT parsing

Quoted 19 lines · Jason Cooper
Quoted 18 lines · Thomas Petazzoni

Dear Jason Cooper,

Quoted 8 lines · Jason Cooper
Quoted 5 lines

Do not send this series upstream (or even in -next) until it has been at least build-tested and acked by the affected architectures. AFAIK it breaks microblaze build (simple missing #include) and isn't yet tested on powerpc (I'm on vacation, maybe somebody else on linuxppc-dev can do it though).

I added the missing include reference by Michal Simek for the branch at mvebu/drivers.

Some other build issues were reported on x86 during the night (thanks to automated build tests), and Andrew Murray has just sent a new version v7 of the patch set addressing those issues, as well as the missing include.

Quoted 6 lines
Quoted 2 lines

Also, please note that Andrew's patch set contains three patches, but the Marvell PCIe driver only requires PATCH 1/3 and PATCH 2/3.

Ok. Thanks Andrew! Do you (AndrewM) want me to keep the series together? Or drop 3/3 from my tree? I can do either, I just need to know.

Patch 1 has an ack from Microblaze but not yet from PowerPC, it probably needs an ack from both of these before moving upwards.

Patch 3 is awaiting feedback from Mips, ideally all three patches could stay together but if feedback blocks this then I guess it could go alone later.

Andrew Murray