Add I2C support to R8A7778/BOCK-W
cover Add I2C support to R8A7778/BOCK-W
Hello.
Here's the set of 2 patches against the Simon Horman's 'renesas.git' repo,
'renesas-next-20130417' tag and my recent yet unapplied patches. Here we add I2C support to the R8A7778 platform code and enable I2C driver on BOCK-W board. This will be important in the future for the VIN driver since the video sensor chip is controller via I2C bus #0 on BOCK-W.
[1/2] ARM: shmobile: r8a7778: add I2C support [2/2] ARM: shmobile: BOCK-W: enable I2C in defconfig
WBR, Sergei
PATCH 1/2 ARM: shmobile: r8a7778: add I2C support
From: Vladimir Barinov <[email protected]>
Add I2C clocks and platform devices for R8A7778 SoC.
Don't forget to also add the peripheral clock which the I2C driver uses.
--- arch/arm/mach-shmobile/clock-r8a7778.c | 12 ++++++++++++ arch/arm/mach-shmobile/setup-r8a7778.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+)
arch/arm/mach-shmobile/clock-r8a7778.c +12 -0
@@ -3,6 +3,7 @@* * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <[email protected]> +* Copyright (C) 2013 Cogent Embedded, Inc. * * based on r8a7779 *
@@ -105,6 +106,7 @@ static struct clk *main_clks[] = {enum {MSTP114 ,MSTP100 , +MSTP030 ,MSTP029 ,MSTP028 ,MSTP027 ,MSTP026 ,MSTP025 ,MSTP024 ,MSTP023 ,MSTP022 ,MSTP021 ,MSTP016 ,MSTP015 ,MSTP_NR };
@@ -112,6 +114,10 @@ enum {static struct clk mstp_clks[MSTP_NR ] = { [MSTP114 ] =SH_CLK_MSTP32 (&p_clk,MSTPCR1 ,14 ,0 ),/* Ether */ [MSTP100 ] =SH_CLK_MSTP32 (&p_clk,MSTPCR1 ,0 ,0 ),/* USB0/1 */ + [MSTP030 ] =SH_CLK_MSTP32 (&p_clk,MSTPCR0 ,30 ,0 ),/* I2C0 */ + [MSTP029 ] =SH_CLK_MSTP32 (&p_clk,MSTPCR0 ,29 ,0 ),/* I2C1 */ + [MSTP028 ] =SH_CLK_MSTP32 (&p_clk,MSTPCR0 ,28 ,0 ),/* I2C2 */ + [MSTP027 ] =SH_CLK_MSTP32 (&p_clk,MSTPCR0 ,27 ,0 ),/* I2C3 */ [MSTP026 ] =SH_CLK_MSTP32 (&p_clk,MSTPCR0 ,26 ,0 ),/* SCIF0 */ [MSTP025 ] =SH_CLK_MSTP32 (&p_clk,MSTPCR0 ,25 ,0 ),/* SCIF1 */ [MSTP024 ] =SH_CLK_MSTP32 (&p_clk,MSTPCR0 ,24 ,0 ),/* SCIF2 */
@@ -123,10 +129,16 @@ static struct clk mstp_clks[MSTP_NR] = { };static struct clk_lookup lookups[] = { +CLKDEV_CON_ID ("peripheral_clk" , &p_clk), +/* MSTP32 clocks */ CLKDEV_DEV_ID ("sh-eth" , &mstp_clks[MSTP114 ]),/* Ether */ CLKDEV_DEV_ID ("ehci-platform" , &mstp_clks[MSTP100 ]),/* USB EHCI port0/1 */ CLKDEV_DEV_ID ("ohci-platform" , &mstp_clks[MSTP100 ]),/* USB OHCI port0/1 */ +CLKDEV_DEV_ID ("i2c-rcar.0" , &mstp_clks[MSTP030 ]),/* I2C0 */ +CLKDEV_DEV_ID ("i2c-rcar.1" , &mstp_clks[MSTP029 ]),/* I2C1 */ +CLKDEV_DEV_ID ("i2c-rcar.2" , &mstp_clks[MSTP028 ]),/* I2C2 */ +CLKDEV_DEV_ID ("i2c-rcar.3" , &mstp_clks[MSTP027 ]),/* I2C3 */ CLKDEV_DEV_ID ("sh-sci.0" , &mstp_clks[MSTP026 ]),/* SCIF0 */ CLKDEV_DEV_ID ("sh-sci.1" , &mstp_clks[MSTP025 ]),/* SCIF1 */ CLKDEV_DEV_ID ("sh-sci.2" , &mstp_clks[MSTP024 ]),/* SCIF2 */
arch/arm/mach-shmobile/setup-r8a7778.c +32 -0
@@ -94,6 +94,33 @@ static struct sh_timer_config sh_tmu1_pl &sh_tmu##idx##_platform_data, \ sizeof(sh_tmu##idx##_platform_data)) +/* I2C */ +static struct resource i2c0_resources[] = { +DEFINE_RES_MEM (0xffc70000 ,0x1000 ), +DEFINE_RES_IRQ (gic_iid (0x63 )), +}; + +static struct resource i2c1_resources[] = { +DEFINE_RES_MEM (0xffc71000 ,0x1000 ), +DEFINE_RES_IRQ (gic_iid (0x6e )), +}; + +static struct resource i2c2_resources[] = { +DEFINE_RES_MEM (0xffc72000 ,0x1000 ), +DEFINE_RES_IRQ (gic_iid (0x6c )), +}; + +static struct resource i2c3_resources[] = { +DEFINE_RES_MEM (0xffc73000 ,0x1000 ), +DEFINE_RES_IRQ (gic_iid (0x6d )), +}; + +#define r8a7778_register_i2c (idx) \ + platform_device_register_simple( \ + "i2c-rcar", idx, \ + i2c##idx##_resources, \ + ARRAY_SIZE(i2c##idx##_resources)) +/* USB PHY */ static struct resource usb_phy_resources[] = {DEFINE_RES_MEM (0xffe70800 ,0x100 ),
@@ -236,6 +263,11 @@ void __init r8a7778_add_standard_devicesr8a7778_register_tmu (0 );r8a7778_register_tmu (1 ); + +r8a7778_register_i2c (0 ); +r8a7778_register_i2c (1 ); +r8a7778_register_i2c (2 ); +r8a7778_register_i2c (3 ); }void __init r8a7778_init_late (void )
PATCH 2/2 ARM: shmobile: BOCK-W: enable I2C in defconfig
In reply to Sergei ShtylyovFrom: Vladimir Barinov <[email protected]>
Enable I2C driver in 'bockw_defconfig'.
--- arch/arm/configs/bockw_defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/configs/bockw_defconfig +2 -0
@@ -73,6 +73,8 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=y
PATCH 2/2 ARM: shmobile: BOCK-W: enable I2C in defconfig
Quoted 16 lines · Sergei Shtylyov
From: Vladimir Barinov <[email protected]>
Enable I2C driver in '
bockw_defconfig'.Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>--- arch/arm/configs/bockw_defconfig | 2 ++ 1 file changed, 2 insertions(+)Index: renesas/arch/arm/configs/bockw_defconfig
===================================================================
arch/arm/configs/bockw_defconfig CONFIG_SERIAL_SH_SCI_NR_UARTS=6 · line 80
Quoted 8 lines
arch/arm/configs/bockw_defconfig +2
-0@@ -73,6 +73,8 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=y
I have applied the following after resolving conflicts (I don't see CONFIG_USB=y in my tree). Please let me know if I made an error.
I have queued-up the change for v3.11 in the defconfig-bockw branch and will push is shortly.
commit 6a3fbcf1ced08f9f423944fefcbc372ec72fa4e7
Author: Vladimir Barinov <[email protected]> Date: Wed Apr 17 22:47:27 2013 +0400
ARM: shmobile: BOCK-W: enable I2C in defconfig
Enable I2C driver in 'bockw_defconfig'.
arch/arm/configs/bockw_defconfig +2 -0
@@ -71,6 +71,8 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_SDHI=y
PATCH 2/2 ARM: shmobile: BOCK-W: enable I2C in defconfig
Hello.
Quoted 20 lines · Simon Horman
Quoted 20 lines
From: Vladimir Barinov <[email protected]>
Enable I2C driver in '
bockw_defconfig'.Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>--- arch/arm/configs/bockw_defconfig | 2 ++ 1 file changed, 2 insertions(+)Index: renesas/arch/arm/configs/bockw_defconfig
===================================================================arch/arm/configs/bockw_defconfig +1
-0@@ -73,6 +73,8 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set +CONFIG_I2C=y
Quoted 8 lines
arch/arm/configs/bockw_defconfig CONFIG_SERIAL_SH_SCI_NR_UARTS=6 · line 80
Quoted 4 lines
arch/arm/configs/bockw_defconfig +1
-0+CONFIG_I2C_RCAR=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=yI have applied the following after resolving conflicts (I don't see
CONFIG_USB=yin my tree). Please let me know if I made an error.
I wrote in [0/2] that the patch is atop of my unaccepted USB patches.
Quoted 2 lines
I have queued-up the change for v3.11 in the defconfig-bockw branch and will push is shortly.
Have you also queued patch #1? The patch #2 doesn't make much sense
without it.
WBR, Sergei
PATCH 2/2 ARM: shmobile: BOCK-W: enable I2C in defconfig
Quoted 33 lines · Sergei Shtylyov
Hello.
Quoted 20 lines · Simon Horman
Quoted 20 lines
From: Vladimir Barinov <[email protected]>
Enable I2C driver in '
bockw_defconfig'.Signed-off-by Vladimir Barinov <[email protected]>Signed-off-by Sergei Shtylyov <[email protected]>--- arch/arm/configs/bockw_defconfig | 2 ++ 1 file changed, 2 insertions(+)Index: renesas/arch/arm/configs/bockw_defconfig
===================================================================arch/arm/configs/bockw_defconfig +1
-0@@ -73,6 +73,8 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set +CONFIG_I2C=yQuoted 8 lines
arch/arm/configs/bockw_defconfig CONFIG_SERIAL_SH_SCI_NR_UARTS=6 · line 80
Quoted 4 lines
arch/arm/configs/bockw_defconfig +1
-0+CONFIG_I2C_RCAR=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=yI have applied the following after resolving conflicts (I don't see
CONFIG_USB=yin my tree). Please let me know if I made an error.
Quoted 7 lines
I wrote in [0/2] that the patch is atop of my unaccepted USB patches.
Quoted 2 lines
I have queued-up the change for v3.11 in the defconfig-bockw branch and will push is shortly.
Have you also queued patch #1? The patch #2 doesn't make much
sense without it.
No, I was going to ask for it to be rebased, but I'm happy for it to wait until your USB changes go in if you are happy to wait.
As for not making much sense, I'm happy with pre-emptively applying defconfig changes as they are somewhat orthogonal and live in a different branch.
cover Add I2C support to R8A7778/BOCK-W
In reply to Sergei ShtylyovHi
Quoted 8 lines
Here's the set of 2 patches against the Simon Horman's 'renesas.git' repo,
'renesas-next-20130417' tag and my recent yet unapplied patches. Here we add I2C support to the R8A7778 platform code and enable I2C driver on BOCK-W board. This will be important in the future for the VIN driver since the video sensor chip is controller via I2C bus #0 on BOCK-W.[1/2] ARM: shmobile: r8a7778: add I2C support [2/2] ARM: shmobile: BOCK-W: enable I2C in defconfig
For all patches
Best regards
---
Kuninori Morimoto