Skip to contentSkip to conversation

i2c: stu300: device tree support

PATCH In review Linus Walleij 2 participants 2 messages Apr 22, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 7/23 i2c: stu300: device tree support

From: Linus Walleij <[email protected]>

This adds device tree support for the ST DDC I2C driver known as "stu300" in the kernel tree.

---
Wolfram, I'm seeking an ACK to take this with the other lump of U300 device tree patches through the ARM SoC tree.

---
 Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt | 15 +++++++++++++++
 drivers/i2c/busses/i2c-stu300.c                         | 12 ++++++++++++
 2 files changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt new file +15 -0
new file mode 100644
index 0000000..bd81a48
@@ -0,0 +1,15 @@
+ST Microelectronics DDC I2C
+
+Required properties :
+- compatible : Must be "st,ddci2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Examples :
+
drivers/i2c/busses/i2c-stu300.c +12 -0
index 0a6f941..1beaa05a 100644
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/of_i2c.h>
 
 /* the name of this kernel module */
 #define NAME "stu300"
@@ -923,6 +924,7 @@ stu300_probe(struct platform_device *pdev)
 	adap->nr = bus_nr;
 	adap->algo = &stu300_algo;
 	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
 	i2c_set_adapdata(adap, dev);
 
 	/* i2c device drivers may be active on return from add_adapter() */
@@ -934,6 +936,10 @@ stu300_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, dev);
+	dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
+		 dev->virtbase, dev->irq);
+	of_i2c_register_devices(adap);
+
 	return 0;
 }
 
@@ -978,11 +984,17 @@ stu300_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id stu300_dt_match[] = {
+	{ .compatible = "st,ddci2c" },
+	{},
+};
+
 static struct platform_driver stu300_i2c_driver = {
 	.driver = {
 		.name	= NAME,
 		.owner	= THIS_MODULE,
 		.pm	= STU300_I2C_PM,
+		.of_match_table = stu300_dt_match,
 	},
 	.remove		= __exit_p(stu300_remove),
 
Signature · 1 line
1.7.11.3
#1 lore raw

PATCH 7/23 i2c: stu300: device tree support

Quoted 10 lines · Linus Walleij

From: Linus Walleij <[email protected]>

This adds device tree support for the ST DDC I2C driver known as "stu300" in the kernel tree.

---
Wolfram, I'm seeking an ACK to take this with the other lump of U300 device tree patches through the ARM SoC tree.