ARM: shmobile: lager: Add GPIO LEDs
PATCH 1/1 ARM: shmobile: lager: Add GPIO LEDs
The board has 3 LEDs connected to GPIOs. Add a led-gpio device to support them.
Based on "ARM: shmobile: marzen: Add GPIO LEDs" by Laurent Pinchart.
---
v2
* As suggested by Sergei Shtylyov:
Use platform_device_register_data() instead of platform_add_devices()
* As suggested by Laurent Pinchart:
Use -1 as device id as there is only one such device
--- arch/arm/mach-shmobile/board-lager.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
arch/arm/mach-shmobile/board-lager.c +27 -0
@@ -21,13 +21,37 @@#include <linux/interrupt.h> #include <linux/irqchip.h> #include <linux/kernel.h> +#include <linux/leds.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/platform_device.h> #include <mach/common.h> #include <mach/r8a7790.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* LEDS */ +static struct gpio_led lager_leds[] = { + { + .name ="led8" , + .gpio =RCAR_GP_PIN (5 ,17 ), + .default_state =LEDS_GPIO_DEFSTATE_ON , + }, { + .name ="led7" , + .gpio =RCAR_GP_PIN (4 ,23 ), + .default_state =LEDS_GPIO_DEFSTATE_ON , + }, { + .name ="led6" , + .gpio =RCAR_GP_PIN (4 ,22 ), + .default_state =LEDS_GPIO_DEFSTATE_ON , + }, +}; + +static struct gpio_led_platform_data lager_leds_pdata = { + .leds = lager_leds, + .num_leds =ARRAY_SIZE (lager_leds), +}; +static const struct pinctrl_map lager_pinctrl_map[] = {/* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
@@ -46,6 +70,9 @@ static void __init lager_add_standard_devices(void)r8a7790_pinmux_init ();r8a7790_add_standard_devices (); +platform_device_register_data (&platform_bus,"leds-gpio" ,-1 , + &lager_leds_pdata, +sizeof (lager_leds_pdata)); }static const char *lager_boards_compat_dt[]__initdata = {
Signature · 1 line
1.8.2.1
PATCH 1/1 ARM: shmobile: lager: Add GPIO LEDs
Quoted 10 lines · Simon Horman
The board has 3 LEDs connected to GPIOs. Add a led-gpio device to support them.
Based on "ARM: shmobile: marzen: Add GPIO LEDs" by Laurent Pinchart.
Cc Laurent Pinchart <[email protected]>Signed-off-by Simon Horman <[email protected]>---
Quoted 8 lines
v2
* As suggested by Sergei Shtylyov:
Useplatform_device_register_data()instead ofplatform_add_devices()
* As suggested by Laurent Pinchart:
Use -1 as device id as there is only one such device--- arch/arm/mach-shmobile/board-lager.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
I have queued-up this patch for v3.11 in the boards-lager branch.