Skip to contentSkip to conversation

acpi_cpufreq on Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz problem (3.[4-9].X)

DISCUSSION Stephan von Krawczynski 1 participant 1 message May 8, 2013

lore
Share & tools
lore
#0 lore raw

Hello all,

I see some kind of bug with acpi_cpufreq on Intels Q6600 cpus. If you load the module you see this in proc:

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 600.000
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm tpr_shadow vnmi
flexpriority bogomips : 4800.22 clflush size : 64 cache_alignment :
64 address sizes : 36 bits physical, 48 bits virtual power management:

(repeated for other cores)

As you can see cpu MHz shows 600. Now take a look at cpufreq-info output and see:

hardware limits: 600 MHz - 900 MHz

Obviously this is wrong, I don't know what the minimum should be, but the max should be 2.40 GHz. If you stress the cpu you will notice MHz go up to 900, but that's it. I have several such boxes, and all act the same with all kernels I tried so far (3.4.X, 3.8.X, 3.9.X).
If you unload acpi_cpufreq you see the correct values. To me seems to be no display problem. The box "feels" slower when the module is loaded. With a cpu type Q9300 btw everything works as expected.
If there are ideas or patches to test how to remove this problem, feel free to mail/cc me. I can check out whatever looks promising.

Signature · 2 lines
Regards,
Stephan