Gstreamer 1.X Patches
The subsequent patches add Gstreamer 1.X to Buildroot. Gstreamer has many dependencies which can be disabled or enabled as plugins. For an example of adding a plugin which requires a dependent library, see patches 6 and 7 of the series.
v2 -> v3:
fixes after running build all/none plugin components changed naming from gst-plugins-<blah>1 to gst1-plugins-<blah> options which require currently unpackged libraries are disabled
v1 -> v2:
completed patch series by adding good, bad, and ugly plugins
PATCH v3 1/7 gstreamer1: Add gstreamer version 1.0.7 package
This patch adds the gstreamer version 1.x series to buildroot.
--- package/multimedia/Config.in | 1 + package/multimedia/gstreamer1/Config.in | 37 +++++++++++++++++++++++++++ package/multimedia/gstreamer1/gstreamer1.mk | 36 ++++++++++++++++++++++++++ 3 files changed, 74 insertions(+) create mode 100644 package/multimedia/gstreamer1/Config.in create mode 100644 package/multimedia/gstreamer1/gstreamer1.mk
package/multimedia/Config.in +1 -0
@@ -6,6 +6,7 @@ source "package/multimedia/faad2/Config.in" source "package/multimedia/flac/Config.in" source "package/multimedia/ffmpeg/Config.in" source "package/multimedia/gstreamer/Config.in" +source "package/multimedia/gstreamer1/Config.in" source "package/multimedia/gst-ffmpeg/Config.in" source "package/multimedia/gst-dsp/Config.in" source "package/multimedia/gst-fsl-plugins/Config.in"
package/multimedia/gstreamer1/Config.in new file +37 -0
@@ -0,0 +1,37 @@ +config BR2_PACKAGE_GSTREAMER1 + bool "gstreamer1" + depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS + select BR2_PACKAGE_LIBGLIB2 + help + GStreamer is an open source multimedia framework. + + http://gstreamer.freedesktop.org/ + +config BR2_PACKAGE_GSTREAMER1_GST_DEBUG + bool "enable gst-debug trace support" + default y + depends on BR2_PACKAGE_GSTREAMER1 + help + Enable support for the gst-debug tracing functionality in gstreamer. + This has limited CPU overhead, but does increase the rootfs size + somewhat. + +config BR2_PACKAGE_GSTREAMER1_PLUGIN_REGISTRY + bool "enable plugin registry" + default y + depends on BR2_PACKAGE_GSTREAMER1 + help + Enable support for the GStreamer plugin registry. This may increase + the launch-time for a GStreamer application. + +config BR2_PACKAGE_GSTREAMER1_INSTALL_TOOLS + bool "install gst-launch gst-inspect" + default y + depends on BR2_PACKAGE_GSTREAMER1 + help + Install the gst-launch and gst-inspect tools. This will take up + additional space on the target + +comment "gstreamer requires a toolchain with WCHAR and threads support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
package/multimedia/gstreamer1/gstreamer1.mk new file +36 -0
@@ -0,0 +1,36 @@ +############################################################# +# +# gstreamer1 +# +############################################################# + +GSTREAMER1_VERSION = 1.0.7 +GSTREAMER1_SOURCE = gstreamer-$(GSTREAMER1_VERSION).tar.xz +GSTREAMER1_SITE = http://gstreamer.freedesktop.org/src/gstreamer +GSTREAMER1_INSTALL_STAGING = YES + +# Checking if unaligned memory access works correctly cannot be done when cross +# compiling. For the following architectures there is no information available +# in the configure script. +ifeq ($(BR2_avr32),y) +GSTREAMER1_CONF_ENV = as_cv_unaligned_access=no +endif +ifeq ($(BR2_aarch64),y) +GSTREAMER1_CONF_ENV = as_cv_unaligned_access=yes +endif + +GSTREAMER1_CONF_OPT = \ + --disable-examples \ + --disable-tests \ + --disable-failing-tests \ + --disable-debug \ + --disable-valgrind \ + --disable-benchmarks \ + --disable-check \ + $(if $(BR2_PACKAGE_GSTREAMER1_GST_DEBUG),,--disable-gst-debug) \ + $(if $(BR2_PACKAGE_GSTREAMER1_PLUGIN_REGISTRY),,--disable-registry) \ + $(if $(BR2_PACKAGE_GSTREAMER1_INSTALL_TOOLS),,--disable-tools) \ + +GSTREAMER1_DEPENDENCIES = libglib2 host-pkgconf host-bison host-flex + +$(eval $(autotools-package))
Signature · 1 line
1.7.9.5
PATCH v3 1/7 gstreamer1: Add gstreamer version 1.0.7 package
Hi Spenser,
Very quick first review...
First of all, a comment that is not so much directed at you but at the
rest of the BR developers: the naming issue.
We have a tendency to make a copy of a package when there is a major
version change, cfr. python3 and qt5. However, in this case, I don't think it's a good idea. At this time, many (most?) gstreamer downstreams have already moved to 1.x. Also, no more patches will be made the the 0.10 series (though distro's may still make patches). So we can expect the old gstreamer stuff to die out relatively quickly. But if we call the new thing gstreamer1 now, we're essentially stuck with that name for all eternity.
So instead I'd try to make 0.10 or 1.0 a choice in the gstreamer
package itself. For me it's fine if inside the Config.in and the .mk files we basically have the two versions in a big ifeq() construct, but at least we can keep on using the BR2_PACKAGE_GST* symbols.
Obviously, there will be some packages that break down when gstreamer
1.0 is used, but we'll have to discover that at some point anyway.
Quoted 33 lines · Spenser Gilliland
This patch adds the gstreamer version 1.x series to buildroot.
Signed-off-by Spenser Gilliland <[email protected]>--- package/multimedia/Config.in | 1 + package/multimedia/gstreamer1/Config.in | 37 +++++++++++++++++++++++++++ package/multimedia/gstreamer1/gstreamer1.mk | 36 ++++++++++++++++++++++++++ 3 files changed, 74 insertions(+)create mode 100644 package/multimedia/gstreamer1/Config.in create mode 100644
package/multimedia/gstreamer1/gstreamer1.mkpackage/multimedia/Config.in +1
-0@@ -6,6 +6,7 @@ source "package/multimedia/faad2/Config.in" source "package/multimedia/flac/Config.in" source "package/multimedia/ffmpeg/Config.in" source "package/multimedia/gstreamer/Config.in" +source "package/multimedia/gstreamer1/Config.in" source "package/multimedia/gst-ffmpeg/Config.in" source "package/multimedia/gst-dsp/Config.in" source "package/multimedia/gst-fsl-plugins/Config.in"package/multimedia/gstreamer1/Config.in new file +4
-0@@ -0,0 +1,37 @@ +config BR2_PACKAGE_GSTREAMER1 + bool "gstreamer1" + depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS
package/multimedia/gstreamer1/Config.in line 14
Quoted 10 lines
package/multimedia/gstreamer1/Config.in new file +10
-0+ select BR2_PACKAGE_LIBGLIB2 + help + GStreamer is an open source multimedia framework. + + http://gstreamer.freedesktop.org/ + +config BR2_PACKAGE_GSTREAMER1_GST_DEBUG + bool "enable gst-debug trace support" + default y + depends on BR2_PACKAGE_GSTREAMER1
We nowadays prefer to put sub-options inside an if...endif construct
instead of with 'depends on'.
Regards,
Arnout
Quoted 23 lines
package/multimedia/gstreamer1/Config.in new file +23
-0+ help + Enable support for the gst-debug tracing functionality in gstreamer. + This has limited CPU overhead, but does increase the rootfs size + somewhat. + +config BR2_PACKAGE_GSTREAMER1_PLUGIN_REGISTRY + bool "enable plugin registry" + default y + depends on BR2_PACKAGE_GSTREAMER1 + help + Enable support for the GStreamer plugin registry. This may increase + the launch-time for a GStreamer application. + +config BR2_PACKAGE_GSTREAMER1_INSTALL_TOOLS + bool "install gst-launch gst-inspect" + default y + depends on BR2_PACKAGE_GSTREAMER1 + help + Install the gst-launch and gst-inspect tools. This will take up + additional space on the target + +comment "gstreamer requires a toolchain with WCHAR and threads support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
[snip]
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
PATCH v3 1/7 gstreamer1: Add gstreamer version 1.0.7 package
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Arnout" == Arnout Vandecappelle <[email protected]> writes:
Arnout> Hi Spenser,
Arnout> Very quick first review...
Arnout> First of all, a comment that is not so much directed at you but at Arnout> the rest of the BR developers: the naming issue.
Arnout> We have a tendency to make a copy of a package when there is a major Arnout> version change, cfr. python3 and qt5. However, in this case, I don't Arnout> think it's a good idea. At this time, many (most?) gstreamer Arnout> downstreams have already moved to 1.x. Also, no more patches will be Arnout> made the the 0.10 series (though distro's may still make patches). So Arnout> we can expect the old gstreamer stuff to die out relatively Arnout> quickly. But if we call the new thing gstreamer1 now, we're Arnout> essentially stuck with that name for all eternity.
I'm not so sure. If you look at the other recent major version upgrades (python/qt/gtk), it seems to me like people aren't jumping on the new version right away. I had several people asking me if qt4 would still be available once qt5 got added.
I think the nicest thing we can do for our users is just to add the new package next to the existing when these incompatible major version upgrades happen, so they can chose themselves when/if they want to upgrade. I agree that gstreamer1 perhaps isn't the nicest name, but it isn't too bad either, and for python/qt/gtk the names are commonly used.
Arnout> So instead I'd try to make 0.10 or 1.0 a choice in the gstreamer Arnout> package itself. For me it's fine if inside the Config.in and the .mk Arnout> files we basically have the two versions in a big ifeq() construct, Arnout> but at least we can keep on using the BR2_PACKAGE_GST* symbols.
What would the advantage be? Just that people could move from gstreamer 0.10 to 1.0 without adjusting their config?
Arnout> Obviously, there will be some packages that break down when Arnout> gstreamer 1.0 is used, but we'll have to discover that at some Arnout> point anyway.
Like the closed source imx stuff.
Signature · 1 line
Bye, Peter Korsgaard
PATCH v3 1/7 gstreamer1: Add gstreamer version 1.0.7 package
Dear Peter Korsgaard,
Quoted 9 lines · Peter Korsgaard
Arnout> We have a tendency to make a copy of a package when there is a major Arnout> version change, cfr. python3 and qt5. However, in this case, I don't Arnout> think it's a good idea. At this time, many (most?) gstreamer Arnout> downstreams have already moved to 1.x. Also, no more patches will be Arnout> made the the 0.10 series (though distro's may still make patches). So Arnout> we can expect the old gstreamer stuff to die out relatively Arnout> quickly. But if we call the new thing gstreamer1 now, we're Arnout> essentially stuck with that name for all eternity.
Quoted 4 lines
I'm not so sure. If you look at the other recent major version upgrades (python/qt/gtk), it seems to me like people aren't jumping on the new version right away. I had several people asking me if qt4 would still be available once qt5 got added.
I agree. I recently had a customer using Buildroot, with a fairly important stack of custom/proprietary software written on top of gstreamer 0.10. Having the possibility to continue to use gstreamer 0.10 is very important to allow such users to migrate to newer Buildroot versions. The migration to gstreamer 1.x will not happen overnight for such users who have a large body of software written against gstreamer 0.10.
Similarly for Qt4 vs. Qt5, as Peter mentioned.
Quoted 5 lines
I think the nicest thing we can do for our users is just to add the new package next to the existing when these incompatible major version upgrades happen, so they can chose themselves when/if they want to upgrade. I agree that gstreamer1 perhaps isn't the nicest name, but it isn't too bad either, and for python/qt/gtk the names are commonly used.
Right. Ideally, we would have preferred to have 'gstreamer' be the latest available version, and 'gstreamer0.10' be the name for the old packages. But that doesn't work, because we can't predict the future.
We had the same for Gtk. In the past we had package/libgtk and package/libgtk2, and now package/libgtk is gone. And presumably, we'll gain package/libgtk3 in the future.
Quoted 5 lines
Arnout> Obviously, there will be some packages that break down when Arnout> gstreamer 1.0 is used, but we'll have to discover that at some Arnout> point anyway.
Like the closed source imx stuff.
Hum, not sure to get your point here, though.
Best regards,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH v3 1/7 gstreamer1: Add gstreamer version 1.0.7 package
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
Hi,
Arnout> Obviously, there will be some packages that break down when Arnout> gstreamer 1.0 is used, but we'll have to discover that at some Arnout> point anyway.
Quoted 1 line
Quoted 1 line
Like the closed source imx stuff.
Thomas> Hum, not sure to get your point here, though.
Well, it was late when I wrote this ;) I just meant packages like gst-fsl-plugins probably won't work with gstreamer 1.x
Signature · 1 line
Bye, Peter Korsgaard
PATCH v3 1/7 gstreamer1: Add gstreamer version 1.0.7 package
Dear Peter Korsgaard,
Quoted 10 lines · Peter Korsgaard
Arnout> Obviously, there will be some packages that break down when Arnout> gstreamer 1.0 is used, but we'll have to discover that at some Arnout> point anyway.
Quoted 1 line
Quoted 1 line
Like the closed source imx stuff.
Thomas> Hum, not sure to get your point here, though.
Well, it was late when I wrote this ;) I just meant packages like gst-fsl-plugins probably won't work with gstreamer 1.x
Ah, yes, indeed. Makes sense now :)
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH v3 1/7 gstreamer1: Add gstreamer version 1.0.7 package
In reply to Thomas PetazzoniQuoted 23 lines · Thomas Petazzoni
Quoted 9 lines · Peter Korsgaard
Quoted 9 lines
Arnout> We have a tendency to make a copy of a package when there is a major Arnout> version change, cfr. python3 and qt5. However, in this case, I don't Arnout> think it's a good idea. At this time, many (most?) gstreamer Arnout> downstreams have already moved to 1.x. Also, no more patches will be Arnout> made the the 0.10 series (though distro's may still make patches). So Arnout> we can expect the old gstreamer stuff to die out relatively Arnout> quickly. But if we call the new thing gstreamer1 now, we're Arnout> essentially stuck with that name for all eternity.
Quoted 4 lines
Quoted 4 lines
I'm not so sure. If you look at the other recent major version upgrades (python/qt/gtk), it seems to me like people aren't jumping on the new version right away. I had several people asking me if qt4 would still be available once qt5 got added.
I agree. I recently had a customer using Buildroot, with a fairly important stack of custom/proprietary software written on top of gstreamer 0.10. Having the possibility to continue to use gstreamer 0.10 is very important to allow such users to migrate to newer Buildroot versions. The migration to gstreamer 1.x will not happen overnight for such users who have a large body of software written against gstreamer 0.10.
Quoted 1 line
Similarly for Qt4 vs. Qt5, as Peter mentioned.
Fair enough. I guess Peter's right, having the 1 in the name doesn't hurt.
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
PATCH v3 1/7 gstreamer1: Add gstreamer version 1.0.7 package
In reply to Arnout VandecappelleQuoted 15 lines · Arnout Vandecappelle
Hi Spenser,
Very quick first review...
First of all, a comment that is not so much directed at you but at the rest
of the BR developers: the naming issue.We have a tendency to make a copy of a package when there is a major
version change, cfr. python3 and qt5. However, in this case, I don't think it's a good idea. At this time, many (most?) gstreamer downstreams have already moved to 1.x. Also, no more patches will be made the the 0.10 series (though distro's may still make patches). So we can expect the old gstreamer stuff to die out relatively quickly. But if we call the new thing gstreamer1 now, we're essentially stuck with that name for all eternity.
Quoted 8 lines
So instead I'd try to make 0.10 or 1.0 a choice in the gstreamer package
itself. For me it's fine if inside the Config.in and the .mk files we basically have the two versions in a bigifeq()construct, but at least we can keep on using the BR2_PACKAGE_GST* symbols.Obviously, there will be some packages that break down when gstreamer 1.0
is used, but we'll have to discover that at some point anyway.
Per discussion will leave as gstreamer1.
Quoted 2 lines
We nowadays prefer to put sub-options inside an if...endif construct
instead of with 'depends on'.
Will fix.
Please continue to review these patches and let me know of any additional issues.
Regards,
Spenser
--
Spenser Gilliland
Computer Engineer
Doctoral Candidate
PATCH v3 2/7 gst1-plugins-base: add gstreamer1 base plugins
In reply to Spenser GillilandAdds gstreamer 1.X base plugins.
--- package/multimedia/Config.in | 1 + package/multimedia/gst1-plugins-base/Config.in | 106 +++++++++++ .../gst1-plugins-base/gst1-plugins-base.mk | 201 ++++++++++++++++++++ 3 files changed, 308 insertions(+) create mode 100644 package/multimedia/gst1-plugins-base/Config.in create mode 100644 package/multimedia/gst1-plugins-base/gst1-plugins-base.mk
package/multimedia/Config.in +1 -0
@@ -12,6 +12,7 @@ source "package/multimedia/gst-dsp/Config.in" source "package/multimedia/gst-fsl-plugins/Config.in" source "package/multimedia/gst-omapfb/Config.in" source "package/multimedia/gst-plugins-base/Config.in" +source "package/multimedia/gst1-plugins-base/Config.in" source "package/multimedia/gst-plugins-good/Config.in" source "package/multimedia/gst-plugins-bad/Config.in" source "package/multimedia/gst-plugins-ugly/Config.in"
package/multimedia/gst1-plugins-base/Config.in new file +106 -0
106 lines not on this page · raw message
package/multimedia/gst1-plugins-base/gst1-plugins-base.mk new file +201 -0
201 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v3 3/7 gst1-plugins-good: add gstreamer1 good plugins
In reply to Spenser GillilandAdds gstreamer 1.X good plugins.
--- package/multimedia/Config.in | 1 + package/multimedia/gst1-plugins-good/Config.in | 213 +++++++++++ .../gst1-plugins-good/gst1-plugins-good.mk | 400 ++++++++++++++++++++ 3 files changed, 614 insertions(+) create mode 100644 package/multimedia/gst1-plugins-good/Config.in create mode 100644 package/multimedia/gst1-plugins-good/gst1-plugins-good.mk
package/multimedia/Config.in +1 -0
@@ -14,6 +14,7 @@ source "package/multimedia/gst-omapfb/Config.in" source "package/multimedia/gst-plugins-base/Config.in" source "package/multimedia/gst1-plugins-base/Config.in" source "package/multimedia/gst-plugins-good/Config.in" +source "package/multimedia/gst1-plugins-good/Config.in" source "package/multimedia/gst-plugins-bad/Config.in" source "package/multimedia/gst-plugins-ugly/Config.in" source "package/multimedia/lame/Config.in"
package/multimedia/gst1-plugins-good/Config.in new file +213 -0
213 lines not on this page · raw message
package/multimedia/gst1-plugins-good/gst1-plugins-good.mk new file +400 -0
400 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v3 4/7 gst1-plugins-bad: add gstreamer1 bad plugins
In reply to Spenser GillilandAdds gstreamer 1.X bad plugins
--- package/multimedia/Config.in | 1 + package/multimedia/gst1-plugins-bad/Config.in | 325 ++++++++++ .../gst1-plugins-bad/gst1-plugins-bad.mk | 654 ++++++++++++++++++++ 3 files changed, 980 insertions(+) create mode 100644 package/multimedia/gst1-plugins-bad/Config.in create mode 100644 package/multimedia/gst1-plugins-bad/gst1-plugins-bad.mk
package/multimedia/Config.in +1 -0
@@ -16,6 +16,7 @@ source "package/multimedia/gst1-plugins-base/Config.in" source "package/multimedia/gst-plugins-good/Config.in" source "package/multimedia/gst1-plugins-good/Config.in" source "package/multimedia/gst-plugins-bad/Config.in" +source "package/multimedia/gst1-plugins-bad/Config.in" source "package/multimedia/gst-plugins-ugly/Config.in" source "package/multimedia/lame/Config.in" source "package/multimedia/madplay/Config.in"
package/multimedia/gst1-plugins-bad/Config.in new file +325 -0
325 lines not on this page · raw message
package/multimedia/gst1-plugins-bad/gst1-plugins-bad.mk new file +654 -0
654 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v3 5/7 gst1-plugins-ugly: add gstreamer1 ugly plugins
In reply to Spenser GillilandAdds gstreamer 1.X ugly plugins
--- package/multimedia/Config.in | 1 + package/multimedia/gst1-plugins-ugly/Config.in | 49 +++++++++++ .../gst1-plugins-ugly/gst1-plugins-ugly.mk | 89 ++++++++++++++++++++ 3 files changed, 139 insertions(+) create mode 100644 package/multimedia/gst1-plugins-ugly/Config.in create mode 100644 package/multimedia/gst1-plugins-ugly/gst1-plugins-ugly.mk
package/multimedia/Config.in +1 -0
@@ -18,6 +18,7 @@ source "package/multimedia/gst1-plugins-good/Config.in" source "package/multimedia/gst-plugins-bad/Config.in" source "package/multimedia/gst1-plugins-bad/Config.in" source "package/multimedia/gst-plugins-ugly/Config.in" +source "package/multimedia/gst1-plugins-ugly/Config.in" source "package/multimedia/lame/Config.in" source "package/multimedia/madplay/Config.in" source "package/multimedia/mpd/Config.in"
package/multimedia/gst1-plugins-ugly/Config.in new file +49 -0
49 lines not on this page · raw message
package/multimedia/gst1-plugins-ugly/gst1-plugins-ugly.mk new file +89 -0
89 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v3 6/7 libvpx: new package libvpx
In reply to Spenser Gillilandadds webm multimedia support and the VP8 encoder/decoder library.
--- package/multimedia/Config.in | 1 + package/multimedia/libvpx/Config.in | 6 ++++ package/multimedia/libvpx/libvpx.mk | 52 +++++++++++++++++++++++++++++++++++ 3 files changed, 59 insertions(+) create mode 100644 package/multimedia/libvpx/Config.in create mode 100644 package/multimedia/libvpx/libvpx.mk
package/multimedia/Config.in +1 -0
@@ -20,6 +20,7 @@ source "package/multimedia/gst1-plugins-bad/Config.in" source "package/multimedia/gst-plugins-ugly/Config.in" source "package/multimedia/gst1-plugins-ugly/Config.in" source "package/multimedia/lame/Config.in" +source "package/multimedia/libvpx/Config.in" source "package/multimedia/madplay/Config.in" source "package/multimedia/mpd/Config.in" source "package/multimedia/mpg123/Config.in"
package/multimedia/libvpx/Config.in new file +6 -0
@@ -0,0 +1,6 @@ +config BR2_PACKAGE_LIBVPX + bool "libvpx" + help + a high-quality, open video format that's freely available to everyone. + + http://webmproject.org
package/multimedia/libvpx/libvpx.mk new file +52 -0
52 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v3 7/7 gst1-plugins-good: add libvpx support
In reply to Spenser Gillilandadds libvpx support to gst1-plugins-good
--- package/multimedia/gst1-plugins-good/Config.in | 4 ++++ .../gst1-plugins-good/gst1-plugins-good.mk | 10 ++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-)
package/multimedia/gst1-plugins-good/Config.in +4 -0
@@ -206,6 +206,10 @@ config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_SPEEX bool "speex" select BR2_PACKAGE_SPEEX +config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_VPX + bool "vpx (webm)" + select BR2_PACKAGE_LIBVPX + config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_WAVPACK bool "wavpack (*.wv audio)" select BR2_PACKAGE_WAVPACK
package/multimedia/gst1-plugins-good/gst1-plugins-good.mk +8 -2
@@ -27,8 +27,7 @@ GST1_PLUGINS_GOOD_CONF_OPT += \ --disable-jack \ --disable-libdv \ --disable-dv1394 \ - --disable-taglib \ - --disable-vpx + --disable-taglib GST1_PLUGINS_GOOD_DEPENDENCIES = gstreamer1 gst1-plugins-base
@@ -390,6 +389,13 @@ else GST1_PLUGINS_GOOD_CONF_OPT += --disable-speex endif +ifeq ($(BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_VPX),y) +GST1_PLUGINS_GOOD_CONF_OPT += --enable-vpx +GST1_PLUGINS_GOOD_DEPENDENCIES += libvpx +else +GST1_PLUGINS_GOOD_CONF_OPT += --disable-vpx +endif + ifeq ($(BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_WAVPACK),y) GST1_PLUGINS_GOOD_CONF_OPT += --enable-wavpack GST1_PLUGINS_GOOD_DEPENDENCIES += wavpack
Signature · 1 line
1.7.9.5