Booting u-boot for versatile in qemu fails
Hi,
I am trying to use u-boot configured for uboot_versatileqemu in qemu-system-arm.
I only get a black screen a no serial output at all. I have tested several versions, and taken latest u-boot fromgit://git.denx.de
I have also upgraded qemu to 1.5.0-rc2
My command line is as follows:
qemu-system-arm -M versatilepb -m 128M -kernel u-boot.bin -serial stdio
I have configured u-boot like that:
make CROSS_COMPILE=arm-linux-gnueabihf- versatileqemu_config
My compiler is:
#arm-linux-gnueabihf-gcc --version
arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.7-2012.10-20121022
- Linaro GCC 2012.10) 4.7.3 20121001 (prerelease)
I also tried the ca9x4_ct_vxp, because I often use vexpress kernels in qemu for vexpress-a9, but no better success
Is there a configuration that is known to work ?
Best regards
Thierry
Hi Thierry,
Quoted 24 lines · Thierry Bultel
Hi,
I am trying to use u-boot configured for
uboot_versatileqemuin qemu-system-arm.I only get a black screen a no serial output at all. I have tested several versions, and taken latest u-boot from
git://git.denx.deI have also upgraded qemu to 1.5.0-rc2
My command line is as follows:
qemu-system-arm -M versatilepb -m 128M -kernel u-boot.bin -serial stdio
I have configured u-boot like that:
make CROSS_COMPILE=arm-linux-gnueabihf-versatileqemu_configMy compiler is:
#arm-linux-gnueabihf-gcc --version
arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.7-2012.10-20121022
- Linaro GCC 2012.10) 4.7.3 20121001 (prerelease)
Quoted 4 lines
I also tried the
ca9x4_ct_vxp, because I often use vexpress kernels in qemu for vexpress-a9, but no better successIs there a configuration that is known to work ?
At least I know that versatileqemu on current u-boot-arm/master with wemu-system-arm v1.2.0 works, with command line
qemu-system-arm -M versatilepb -m 128M -serial stdio -kernel u-boot -display none
And I just tested without '-display none', and still get the serial prompt and U-Boot commands working.
Quoted 2 lines
Best regards
Thierry
Amicalement,
Signature · 1 line
Albert.
Le 16/05/2013 16:25, Albert ARIBAUD a ?crit :
Quoted 33 lines
Hi Thierry,
Quoted 24 lines · Thierry Bultel
Hi,
I am trying to use u-boot configured for
uboot_versatileqemuin qemu-system-arm.I only get a black screen a no serial output at all. I have tested several versions, and taken latest u-boot from
git://git.denx.deI have also upgraded qemu to 1.5.0-rc2
My command line is as follows:
qemu-system-arm -M versatilepb -m 128M -kernel u-boot.bin -serial stdio
I have configured u-boot like that:
make CROSS_COMPILE=arm-linux-gnueabihf-versatileqemu_configMy compiler is:
#arm-linux-gnueabihf-gcc --version
arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.7-2012.10-20121022
- Linaro GCC 2012.10) 4.7.3 20121001 (prerelease)Quoted 4 lines
I also tried the
ca9x4_ct_vxp, because I often use vexpress kernels in qemu for vexpress-a9, but no better successIs there a configuration that is known to work ?
Quoted 8 lines
At least I know that versatileqemu on current u-boot-arm/master with wemu-system-arm v1.2.0 works, with command line
qemu-system-arm -M versatilepb -m 128M -serial stdio -kernel u-boot -display none
And I just tested without '-display none', and still get the serial prompt and U-Boot commands working.
Thanks;
I have taken u-boot-arm/master, and there is still no output neither with the latest qemu, nor with 1.2.2
It could be thus be related to compiler I use.
Would you mind testing my uboot image on your configuration ?
regards
Thierry
Quoted 3 lines
Quoted 2 lines
Best regards
ThierryAmicalement,
Hi Thierry,
Quoted 40 lines · Thierry Bultel
Le 16/05/2013 16:25, Albert ARIBAUD a ?crit :
Quoted 39 lines
Hi Thierry,
Quoted 24 lines · Thierry Bultel
Hi,
I am trying to use u-boot configured for
uboot_versatileqemuin qemu-system-arm.I only get a black screen a no serial output at all. I have tested several versions, and taken latest u-boot from
git://git.denx.deI have also upgraded qemu to 1.5.0-rc2
My command line is as follows:
qemu-system-arm -M versatilepb -m 128M -kernel u-boot.bin -serial stdio
I have configured u-boot like that:
make CROSS_COMPILE=arm-linux-gnueabihf-versatileqemu_configMy compiler is:
#arm-linux-gnueabihf-gcc --version
arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.7-2012.10-20121022
- Linaro GCC 2012.10) 4.7.3 20121001 (prerelease)Quoted 4 lines
I also tried the
ca9x4_ct_vxp, because I often use vexpress kernels in qemu for vexpress-a9, but no better successIs there a configuration that is known to work ?
At least I know that versatileqemu on current u-boot-arm/master with wemu-system-arm v1.2.0 works, with command line
qemu-system-arm -M versatilepb -m 128M -serial stdio -kernel u-boot -display none
Quoted 8 lines
Quoted 2 lines
And I just tested without '-display none', and still get the serial prompt and U-Boot commands working.
Thanks;
I have taken u-boot-arm/master, and there is still no output neither with the latest qemu, nor with 1.2.2
It could be thus be related to compiler I use.
Which compiler are you using?
Quoted 1 line
Would you mind testing my uboot image on your configuration ?
No problem.
Quoted 8 lines
regards
ThierryQuoted 3 lines
Quoted 2 lines
Best regards
ThierryAmicalement,
Amicalement,
Signature · 1 line
Albert.