md: Partially revert 2f6db2a7, which broke raid5
PATCH 1/1 md: Partially revert 2f6db2a7, which broke raid5
Commit 2f6db2a7 was part of a series that cleaned up mdraid code by replacing explicit re-initialization of struct bio with bio_reset().
In raid5 it incorrectly assumed that a couple initializations of its members was a full reset, erasing the existing data and unconditionally triggering the following BUG when assembling arrays:
[ 14.653072] kernel BUG at /home/calvinow/git/linux/drivers/scsi/scsi_lib.c:1196! [ 14.653074] invalid opcode: 0000 [#1] PREEMPT SMP [ 14.653076] CPU: 1 PID: 40 Comm: kworker/1:0H Not tainted 3.10.0-rc1-amd-00279-g8f710dd #3 [ 14.653077] Hardware name: System manufacturer System Product Name/M5A88-M, BIOS 0601 09/20/2011 [ 14.653082] Workqueue: kblockd blk_delay_work <snip> [ 14.653123] Call Trace: [ 14.653126] [<ffffffff81477248>] sd_prep_fn+0x2c8/0xb70 [ 14.653129] [<ffffffff812c8b70>] ? deadline_remove_request.isra.9+0x50/0x90 [ 14.653132] [<ffffffff812b8f5b>] blk_peek_request+0xdb/0x210 [ 14.653134] [<ffffffff81465f15>] scsi_request_fn+0x45/0x4e0 [ 14.653136] [<ffffffff812b6a51>] __blk_run_queue+0x31/0x40 [ 14.653138] [<ffffffff812b6a84>] blk_delay_work+0x24/0x40 [ 14.653141] [<ffffffff8105dc2a>] process_one_work+0x1da/0x490 [ 14.653143] [<ffffffff8105dbcd>] ? process_one_work+0x17d/0x490 [ 14.653145] [<ffffffff8105e32a>] worker_thread+0x11a/0x370 [ 14.653147] [<ffffffff8105e210>] ? rescuer_thread+0x2f0/0x2f0 [ 14.653149] [<ffffffff81066296>] kthread+0xd6/0xe0 [ 14.653151] [<ffffffff810661c0>] ? __kthread_unpark+0x50/0x50 [ 14.653154] [<ffffffff816e4d6c>] ret_from_fork+0x7c/0xb0 [ 14.653156] [<ffffffff810661c0>] ? __kthread_unpark+0x50/0x50 [ 14.653172] Code: <snip> [ 14.653174] RIP [<ffffffff81467329>] scsi_setup_fs_cmnd+0x89/0x90
--- drivers/md/raid5.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/md/raid5.c +3 -2
@@ -643,7 +643,6 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)set_bit (STRIPE_IO_STARTED , &sh->state); -bio_reset (bi); bi->bi_bdev = rdev->bdev; bi->bi_rw = rw; bi->bi_end_io = (rw &WRITE )
@@ -664,9 +663,12 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)if (test_bit (R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |=REQ_FLUSH ; + bi->bi_flags =1 <<BIO_UPTODATE ; + bi->bi_idx =0 ; bi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; bi->bi_io_vec[0 ].bv_offset =0 ; bi->bi_size =STRIPE_SIZE ; + bi->bi_next =NULL ;if (rrdev)set_bit (R5_DOUBLE_LOCKED , &sh->dev[i].flags);
@@ -683,7 +685,6 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)set_bit (STRIPE_IO_STARTED , &sh->state); -bio_reset (rbi); rbi->bi_bdev = rrdev->bdev; rbi->bi_rw = rw;BUG_ON (!(rw &WRITE ));
Signature · 1 line
1.8.2.1
Quoted 31 lines · Calvin Owens
Commit
2f6db2a7was part of a series that cleaned up mdraid code by replacing explicit re-initialization of struct bio withbio_reset().In raid5 it incorrectly assumed that a couple initializations of its members was a full reset, erasing the existing data and unconditionally triggering the following BUG when assembling arrays:
[ 14.653072] kernel BUG at /home/calvinow/git/linux/drivers/scsi/scsi_lib.c:1196! [ 14.653074] invalid opcode: 0000 [#1] PREEMPT SMP [ 14.653076] CPU: 1 PID: 40 Comm: kworker/1:0H Not tainted 3.10.0-rc1-amd-00279-g8f710dd #3 [ 14.653077] Hardware name: System manufacturer System Product Name/M5A88-M, BIOS 0601 09/20/2011 [ 14.653082] Workqueue: kblockd blk_delay_work <snip> [ 14.653123] Call Trace: [ 14.653126] [<ffffffff81477248>] sd_prep_fn+0x2c8/0xb70 [ 14.653129] [<ffffffff812c8b70>] ? deadline_remove_request.isra.9+0x50/0x90 [ 14.653132] [<ffffffff812b8f5b>] blk_peek_request+0xdb/0x210 [ 14.653134] [<ffffffff81465f15>] scsi_request_fn+0x45/0x4e0 [ 14.653136] [<ffffffff812b6a51>] __blk_run_queue+0x31/0x40 [ 14.653138] [<ffffffff812b6a84>] blk_delay_work+0x24/0x40 [ 14.653141] [<ffffffff8105dc2a>] process_one_work+0x1da/0x490 [ 14.653143] [<ffffffff8105dbcd>] ? process_one_work+0x17d/0x490 [ 14.653145] [<ffffffff8105e32a>] worker_thread+0x11a/0x370 [ 14.653147] [<ffffffff8105e210>] ? rescuer_thread+0x2f0/0x2f0 [ 14.653149] [<ffffffff81066296>] kthread+0xd6/0xe0 [ 14.653151] [<ffffffff810661c0>] ? __kthread_unpark+0x50/0x50 [ 14.653154] [<ffffffff816e4d6c>] ret_from_fork+0x7c/0xb0 [ 14.653156] [<ffffffff810661c0>] ? __kthread_unpark+0x50/0x50 [ 14.653172] Code: <snip> [ 14.653174] RIP [<ffffffff81467329>] scsi_setup_fs_cmnd+0x89/0x90
Quoted 1 line
Signed-off-by Calvin Owens <[email protected]>
Kent, there was a report on this issue yesterday as well. We need to get this fixed up ASAP.
Signature · 1 line
Jens Axboe
Quoted 32 lines · Jens Axboe
Quoted 31 lines · Calvin Owens
Commit
2f6db2a7was part of a series that cleaned up mdraid code by replacing explicit re-initialization of struct bio withbio_reset().In raid5 it incorrectly assumed that a couple initializations of its members was a full reset, erasing the existing data and unconditionally triggering the following BUG when assembling arrays:
[ 14.653072] kernel BUG at /home/calvinow/git/linux/drivers/scsi/scsi_lib.c:1196! [ 14.653074] invalid opcode: 0000 [#1] PREEMPT SMP [ 14.653076] CPU: 1 PID: 40 Comm: kworker/1:0H Not tainted 3.10.0-rc1-amd-00279-g8f710dd #3 [ 14.653077] Hardware name: System manufacturer System Product Name/M5A88-M, BIOS 0601 09/20/2011 [ 14.653082] Workqueue: kblockd blk_delay_work <snip> [ 14.653123] Call Trace: [ 14.653126] [<ffffffff81477248>] sd_prep_fn+0x2c8/0xb70 [ 14.653129] [<ffffffff812c8b70>] ? deadline_remove_request.isra.9+0x50/0x90 [ 14.653132] [<ffffffff812b8f5b>] blk_peek_request+0xdb/0x210 [ 14.653134] [<ffffffff81465f15>] scsi_request_fn+0x45/0x4e0 [ 14.653136] [<ffffffff812b6a51>] __blk_run_queue+0x31/0x40 [ 14.653138] [<ffffffff812b6a84>] blk_delay_work+0x24/0x40 [ 14.653141] [<ffffffff8105dc2a>] process_one_work+0x1da/0x490 [ 14.653143] [<ffffffff8105dbcd>] ? process_one_work+0x17d/0x490 [ 14.653145] [<ffffffff8105e32a>] worker_thread+0x11a/0x370 [ 14.653147] [<ffffffff8105e210>] ? rescuer_thread+0x2f0/0x2f0 [ 14.653149] [<ffffffff81066296>] kthread+0xd6/0xe0 [ 14.653151] [<ffffffff810661c0>] ? __kthread_unpark+0x50/0x50 [ 14.653154] [<ffffffff816e4d6c>] ret_from_fork+0x7c/0xb0 [ 14.653156] [<ffffffff810661c0>] ? __kthread_unpark+0x50/0x50 [ 14.653172] Code: <snip> [ 14.653174] RIP [<ffffffff81467329>] scsi_setup_fs_cmnd+0x89/0x90
Quoted 4 lines
Quoted 1 line
Signed-off-by Calvin Owens <[email protected]>Kent, there was a report on this issue yesterday as well. We need to get this fixed up ASAP.
Sorry for the delay - been vacationing. Reproduced the original bug, here's a patch that fixes it:
commit 402f5db3708b2062795a384a3d8397cf702e27bc
Author: Kent Overstreet <[email protected]> Date: Sun May 19 10:27:07 2013 -0700
raid5: Initialize bi_vcnt
The patch that converted raid5 to use bio_reset() forgot to initialize bi_vcnt.
drivers/md/raid5.c +2 -0
@@ -664,6 +664,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)if (test_bit (R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |=REQ_FLUSH ; + bi->bi_vcnt =1 ; bi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; bi->bi_io_vec[0 ].bv_offset =0 ; bi->bi_size =STRIPE_SIZE ;
@@ -701,6 +702,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)else rbi->bi_sector = (sh->sector + rrdev->data_offset); + rbi->bi_vcnt =1 ; rbi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; rbi->bi_io_vec[0 ].bv_offset =0 ; rbi->bi_size =STRIPE_SIZE ;
Quoted 33 lines · Kent Overstreet
Quoted 32 lines · Jens Axboe
Quoted 31 lines · Calvin Owens
Commit
2f6db2a7was part of a series that cleaned up mdraid code by replacing explicit re-initialization of struct bio withbio_reset().In raid5 it incorrectly assumed that a couple initializations of its members was a full reset, erasing the existing data and unconditionally triggering the following BUG when assembling arrays:
[ 14.653072] kernel BUG at /home/calvinow/git/linux/drivers/scsi/scsi_lib.c:1196! [ 14.653074] invalid opcode: 0000 [#1] PREEMPT SMP [ 14.653076] CPU: 1 PID: 40 Comm: kworker/1:0H Not tainted 3.10.0-rc1-amd-00279-g8f710dd #3 [ 14.653077] Hardware name: System manufacturer System Product Name/M5A88-M, BIOS 0601 09/20/2011 [ 14.653082] Workqueue: kblockd blk_delay_work <snip> [ 14.653123] Call Trace: [ 14.653126] [<ffffffff81477248>] sd_prep_fn+0x2c8/0xb70 [ 14.653129] [<ffffffff812c8b70>] ? deadline_remove_request.isra.9+0x50/0x90 [ 14.653132] [<ffffffff812b8f5b>] blk_peek_request+0xdb/0x210 [ 14.653134] [<ffffffff81465f15>] scsi_request_fn+0x45/0x4e0 [ 14.653136] [<ffffffff812b6a51>] __blk_run_queue+0x31/0x40 [ 14.653138] [<ffffffff812b6a84>] blk_delay_work+0x24/0x40 [ 14.653141] [<ffffffff8105dc2a>] process_one_work+0x1da/0x490 [ 14.653143] [<ffffffff8105dbcd>] ? process_one_work+0x17d/0x490 [ 14.653145] [<ffffffff8105e32a>] worker_thread+0x11a/0x370 [ 14.653147] [<ffffffff8105e210>] ? rescuer_thread+0x2f0/0x2f0 [ 14.653149] [<ffffffff81066296>] kthread+0xd6/0xe0 [ 14.653151] [<ffffffff810661c0>] ? __kthread_unpark+0x50/0x50 [ 14.653154] [<ffffffff816e4d6c>] ret_from_fork+0x7c/0xb0 [ 14.653156] [<ffffffff810661c0>] ? __kthread_unpark+0x50/0x50 [ 14.653172] Code: <snip> [ 14.653174] RIP [<ffffffff81467329>] scsi_setup_fs_cmnd+0x89/0x90
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Signed-off-by Calvin Owens <[email protected]>Kent, there was a report on this issue yesterday as well. We need to get this fixed up ASAP.
Sorry for the delay - been vacationing. Reproduced the original bug, here's a patch that fixes it:
I saw this issue as well, and your patch fixes it for me (feel free to add my Tested-By if necessary). It didn't appear to be in v3.10-rc3, or any relevant git repos I could find -- just want to make sure it didn't get lost somewhere down the line, since otherwise my system dies.
Quoted 41 lines
commit
402f5db3708b2062795a384a3d8397cf702e27bcAuthor: Kent Overstreet <[email protected]> Date: Sun May 19 10:27:07 2013 -0700raid5: Initialize
bi_vcntThe patch that converted raid5 to use
bio_reset()forgot to initializebi_vcnt.Signed-off-by Kent Overstreet <[email protected]>Cc NeilBrown <[email protected]>Cc Jens Axboe <[email protected]>drivers/md/raid5.c +2
-1@@ -664,6 +664,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)if (test_bit (R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |=REQ_FLUSH ; + bi->bi_vcnt =1 ; bi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; bi->bi_io_vec[0 ].bv_offset =0 ; bi->bi_size =STRIPE_SIZE ;@@ -701,6 +702,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)else rbi->bi_sector = (sh->sector + rrdev->data_offset); + rbi->bi_vcnt =1 ; rbi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; rbi->bi_io_vec[0 ].bv_offset =0 ; rbi->bi_size =STRIPE_SIZE ; --To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 31 lines · Kent Overstreet
Sorry for the delay - been vacationing. Reproduced the original bug, here's a patch that fixes it:
commit
402f5db3708b2062795a384a3d8397cf702e27bcAuthor: Kent Overstreet <[email protected]> Date: Sun May 19 10:27:07 2013 -0700raid5: Initialize
bi_vcntThe patch that converted raid5 to use
bio_reset()forgot to initializebi_vcnt.Signed-off-by Kent Overstreet <[email protected]>Cc NeilBrown <[email protected]>Cc Jens Axboe <[email protected]>drivers/md/raid5.c +1
-0@@ -664,6 +664,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)if (test_bit (R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |=REQ_FLUSH ; + bi->bi_vcnt =1 ; bi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; bi->bi_io_vec[0 ].bv_offset =0 ; bi->bi_size =STRIPE_SIZE ;
drivers/md/raid5.c static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) · line 708
Quoted 7 lines
drivers/md/raid5.c +1
-0@@ -701,6 +702,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)else rbi->bi_sector = (sh->sector + rrdev->data_offset); + rbi->bi_vcnt =1 ; rbi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; rbi->bi_io_vec[0 ].bv_offset =0 ; rbi->bi_size =STRIPE_SIZE ;
Ditto to the previous follow up. We've been tracking this bug for nearly a month:
https://bugzilla.redhat.com/show_bug.cgi?id=962079
Please include this (or the other) patch to fix it.
Rich.
Signature · 4 lines
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones virt-top is 'top' for virtual machines. Tiny program with many powerful monitoring features, net stats, disk stats, logging, etc. http://people.redhat.com/~rjones/virt-top
Quoted 44 lines · Richard W.M. Jones
Quoted 31 lines · Kent Overstreet
Sorry for the delay - been vacationing. Reproduced the original bug, here's a patch that fixes it:
commit
402f5db3708b2062795a384a3d8397cf702e27bcAuthor: Kent Overstreet <[email protected]> Date: Sun May 19 10:27:07 2013 -0700raid5: Initialize
bi_vcntThe patch that converted raid5 to use
bio_reset()forgot to initializebi_vcnt.Signed-off-by Kent Overstreet <[email protected]>Cc NeilBrown <[email protected]>Cc Jens Axboe <[email protected]>drivers/md/raid5.c +1
-0@@ -664,6 +664,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)if (test_bit (R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |=REQ_FLUSH ; + bi->bi_vcnt =1 ; bi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; bi->bi_io_vec[0 ].bv_offset =0 ; bi->bi_size =STRIPE_SIZE ;drivers/md/raid5.c static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) · line 708
Quoted 7 lines
drivers/md/raid5.c +1
-0@@ -701,6 +702,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)else rbi->bi_sector = (sh->sector + rrdev->data_offset); + rbi->bi_vcnt =1 ; rbi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; rbi->bi_io_vec[0 ].bv_offset =0 ; rbi->bi_size =STRIPE_SIZE ;Ditto to the previous follow up. We've been tracking this bug for nearly a month:
Quoted 3 lines
https://bugzilla.redhat.com/show_bug.cgi?id=962079
Please include this (or the other) patch to fix it.
I'm assuming both Kent and I are waiting for Neil to pick it up. Neil, I can include this in my next round going upstream, just let me know. It should have been sent upstream a while back, sorry guys.
Signature · 1 line
Jens Axboe
Quoted 45 lines · On Wed, 29 May 2013 15:03:40 +0200 Jens Axboe <[email protected]> wrote:
Quoted 44 lines · Richard W.M. Jones
Quoted 31 lines · Kent Overstreet
Sorry for the delay - been vacationing. Reproduced the original bug, here's a patch that fixes it:
commit
402f5db3708b2062795a384a3d8397cf702e27bcAuthor: Kent Overstreet <[email protected]> Date: Sun May 19 10:27:07 2013 -0700raid5: Initialize
bi_vcntThe patch that converted raid5 to use
bio_reset()forgot to initializebi_vcnt.Signed-off-by Kent Overstreet <[email protected]>Cc NeilBrown <[email protected]>Cc Jens Axboe <[email protected]>drivers/md/raid5.c +1
-0@@ -664,6 +664,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)if (test_bit (R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |=REQ_FLUSH ; + bi->bi_vcnt =1 ; bi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; bi->bi_io_vec[0 ].bv_offset =0 ; bi->bi_size =STRIPE_SIZE ;drivers/md/raid5.c static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) · line 708
Quoted 7 lines
drivers/md/raid5.c +1
-0@@ -701,6 +702,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)else rbi->bi_sector = (sh->sector + rrdev->data_offset); + rbi->bi_vcnt =1 ; rbi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; rbi->bi_io_vec[0 ].bv_offset =0 ; rbi->bi_size =STRIPE_SIZE ;Ditto to the previous follow up. We've been tracking this bug for nearly a month:
Quoted 8 lines
Quoted 3 lines
https://bugzilla.redhat.com/show_bug.cgi?id=962079
Please include this (or the other) patch to fix it.
I'm assuming both Kent and I are waiting for Neil to pick it up. Neil, I can include this in my next round going upstream, just let me know. It should have been sent upstream a while back, sorry guys.
Seems you were waiting for me, and I was waiting for you :-)
Yes: please include it with your next round. Thanks!
NeilBrown
Quoted 51 lines · NeilBrown
Quoted 49 lines · On Wed, 29 May 2013 15:03:40 +0200 Jens Axboe <[email protected]> wrote:
Quoted 47 lines · Richard W.M. Jones
Quoted 31 lines · Kent Overstreet
Sorry for the delay - been vacationing. Reproduced the original bug, here's a patch that fixes it:
commit
402f5db3708b2062795a384a3d8397cf702e27bcAuthor: Kent Overstreet <[email protected]> Date: Sun May 19 10:27:07 2013 -0700raid5: Initialize
bi_vcntThe patch that converted raid5 to use
bio_reset()forgot to initializebi_vcnt.Signed-off-by Kent Overstreet <[email protected]>Cc NeilBrown <[email protected]>Cc Jens Axboe <[email protected]>drivers/md/raid5.c +1
-0@@ -664,6 +664,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)if (test_bit (R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |=REQ_FLUSH ; + bi->bi_vcnt =1 ; bi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; bi->bi_io_vec[0 ].bv_offset =0 ; bi->bi_size =STRIPE_SIZE ;drivers/md/raid5.c static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) · line 708
Quoted 7 lines
drivers/md/raid5.c +1
-0@@ -701,6 +702,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)else rbi->bi_sector = (sh->sector + rrdev->data_offset); + rbi->bi_vcnt =1 ; rbi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; rbi->bi_io_vec[0 ].bv_offset =0 ; rbi->bi_size =STRIPE_SIZE ;Ditto to the previous follow up. We've been tracking this bug for nearly a month:
https://bugzilla.redhat.com/show_bug.cgi?id=962079
Please include this (or the other) patch to fix it.
Quoted 8 lines
Quoted 4 lines
I'm assuming both Kent and I are waiting for Neil to pick it up. Neil, I can include this in my next round going upstream, just let me know. It should have been sent upstream a while back, sorry guys.
Seems you were waiting for me, and I was waiting for you :-)
Yes: please include it with your next round. Thanks!
Hah, in that case we could have waited for a long time! I'll add it to the current mix, thanks.
Signature · 1 line
Jens Axboe
Richard W.M. Jones
Tested-byQuoted 51 lines · NeilBrown
Quoted 49 lines · On Wed, 29 May 2013 15:03:40 +0200 Jens Axboe <[email protected]> wrote:
Quoted 47 lines · Richard W.M. Jones
Quoted 31 lines · Kent Overstreet
Sorry for the delay - been vacationing. Reproduced the original bug, here's a patch that fixes it:
commit
402f5db3708b2062795a384a3d8397cf702e27bcAuthor: Kent Overstreet <[email protected]> Date: Sun May 19 10:27:07 2013 -0700raid5: Initialize
bi_vcntThe patch that converted raid5 to use
bio_reset()forgot to initializebi_vcnt.Signed-off-by Kent Overstreet <[email protected]>Cc NeilBrown <[email protected]>Cc Jens Axboe <[email protected]>drivers/md/raid5.c +1
-0@@ -664,6 +664,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)if (test_bit (R5_ReadNoMerge, &sh->dev[i].flags)) bi->bi_rw |=REQ_FLUSH ; + bi->bi_vcnt =1 ; bi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; bi->bi_io_vec[0 ].bv_offset =0 ; bi->bi_size =STRIPE_SIZE ;drivers/md/raid5.c static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) · line 708
Quoted 7 lines
drivers/md/raid5.c +1
-0@@ -701,6 +702,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)else rbi->bi_sector = (sh->sector + rrdev->data_offset); + rbi->bi_vcnt =1 ; rbi->bi_io_vec[0 ].bv_len =STRIPE_SIZE ; rbi->bi_io_vec[0 ].bv_offset =0 ; rbi->bi_size =STRIPE_SIZE ;Ditto to the previous follow up. We've been tracking this bug for nearly a month:
https://bugzilla.redhat.com/show_bug.cgi?id=962079
Please include this (or the other) patch to fix it.
Quoted 8 lines
Quoted 4 lines
I'm assuming both Kent and I are waiting for Neil to pick it up. Neil, I can include this in my next round going upstream, just let me know. It should have been sent upstream a while back, sorry guys.
Seems you were waiting for me, and I was waiting for you :-)
Yes: please include it with your next round. Thanks!
BTW I tested this patch and it works, so:
Rich.
Signature · 4 lines
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Fedora Windows cross-compiler. Compile Windows programs, test, and build Windows installers. Over 100 libraries supported. http://fedoraproject.org/wiki/MinGW