Skip to contentSkip to conversation

ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80

PATCH New Simon Horman 3 participants 3 messages May 22, 2013

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80

Update the CMT clocksource rating from 125 to 80.

This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1 introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp:
Avoid dummy clockevent being preferred over real").

The patch noted above reduces the rating of dummy clockevent from 400 to 100. This patch reduces the rating of CMT so that it is once again less than that of the dummy clockevent.

---

I also plan to reduce the rating of the STI clocksource to less than 100. However, as I am not aware of any problems relating to STI in v3.10-rc my plan is to update STI in the v3.11 timeframe.

---
 arch/arm/mach-shmobile/setup-sh73a0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-shmobile/setup-sh73a0.c +1 -1
index fdf3894..9696f36 100644
@@ -252,7 +252,7 @@ static struct sh_timer_config cmt10_platform_data = {
 	.name = "CMT10",
 	.channel_offset = 0x10,
 	.timer_bit = 0,
-	.clockevent_rating = 125,
+	.clockevent_rating = 80,
 	.clocksource_rating = 125,
 };
 
Signature · 1 line
1.8.2.1
#1 lore raw

PATCH v2 1/1 ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80

Quoted 12 lines · Simon Horman

Update the CMT clocksource rating from 125 to 80.

This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1 introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp:
Avoid dummy clockevent being preferred over real").

The patch noted above reduces the rating of dummy clockevent from 400 to 100. This patch reduces the rating of CMT so that it is once again less than that of the dummy clockevent.

Quoted 8 lines

---

I also plan to reduce the rating of the STI clocksource to less than 100. However, as I am not aware of any problems relating to STI in v3.10-rc my plan is to update STI in the v3.11 timeframe.

---
  arch/arm/mach-shmobile/setup-sh73a0.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

BTW, shouldn't the subject be "ARM: shmobile: sh73a0: Update CMT
clocksource rating to 80"?

WBR, Sergei

#2 lore raw

PATCH v2 1/1 ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80

Quoted 23 lines · Sergei Shtylyov
Quoted 12 lines · Simon Horman

Update the CMT clocksource rating from 125 to 80.

This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1 introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp:
Avoid dummy clockevent being preferred over real").

The patch noted above reduces the rating of dummy clockevent from 400 to 100. This patch reduces the rating of CMT so that it is once again less than that of the dummy clockevent.

Quoted 8 lines

---

I also plan to reduce the rating of the STI clocksource to less than 100. However, as I am not aware of any problems relating to STI in v3.10-rc my plan is to update STI in the v3.11 timeframe.

---
 arch/arm/mach-shmobile/setup-sh73a0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 2 lines

BTW, shouldn't the subject be "ARM: shmobile: sh73a0: Update CMT
clocksource rating to 80"?

Yes, silly me.

I'll fix that.