Skip to contentSkip to conversation

mwl8k: Fix the firmware hang issue for 8764

PATCH New Nishant Sarmukadam 1 participant 1 message May 24, 2013 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mwl8k: Fix the firmware hang issue for 8764

The firmware hang issue is not seen very often, though it is still seen sometimes (once in 12 hours in local tests). The changes in the driver ,to interrupt the firmware, are needed when we detect that firmware is stuck and when the host queues are full and we begin to drop packets. This is to ensure that the firmware does not miss any PPA_RDY interrupts to cause the firmware restart dont miss PPA_READY interrupt for SC2

---
 drivers/net/wireless/mwl8k.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/net/wireless/mwl8k.c +9 -2
index 6820fce..a3707fd 100644
@@ -1548,7 +1548,7 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 	if (!priv->pending_tx_pkts)
 		return 0;
 
-	retry = 0;
+	retry = 1;
 	rc = 0;
 
 	spin_lock_bh(&priv->tx_lock);
@@ -1572,13 +1572,19 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 
 		spin_lock_bh(&priv->tx_lock);
 
-		if (timeout) {
+		if (timeout || !priv->pending_tx_pkts) {
 			WARN_ON(priv->pending_tx_pkts);
 			if (retry)
 				wiphy_notice(hw->wiphy, "tx rings drained\n");
 			break;
 		}
 
+		if (retry) {
+			mwl8k_tx_start(priv);
+			retry = 0;
+			continue;
+		}
+
 		if (priv->pending_tx_pkts < oldcount) {
 			wiphy_notice(hw->wiphy,
 				     "waiting for tx rings to drain (%d -> %d pkts)\n",
@@ -2055,6 +2061,7 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw,
 				mwl8k_remove_stream(hw, stream);
 				spin_unlock(&priv->stream_lock);
 			}
+			mwl8k_tx_start(priv);
 			spin_unlock_bh(&priv->tx_lock);
 			pci_unmap_single(priv->pdev, dma, skb->len,
 					 PCI_DMA_TODEVICE);
Signature · 1 line
1.8.0.3