Add HW decoding support for Hantro x170
PATCH 1/1 Add HW decoding support for Hantro x170
This actually consist in a set of proprietary libs, on2-8170-libs and a gstreamer plugin making use of those libraries.
on2-8170-libs is probably libc agnostic but this has not been tested thoroughly.
--- package/multimedia/Config.in | 2 ++ package/multimedia/gst-plugin-x170/Config.in | 10 ++++++++ .../gst-plugin-x170-01-correct-CFLAGS.patch | 28 ++++++++++++++++++++++ .../multimedia/gst-plugin-x170/gst-plugin-x170.mk | 14 +++++++++++ package/multimedia/on2-8170-libs/Config.in | 8 +++++++ package/multimedia/on2-8170-libs/on2-8170-libs.mk | 20 ++++++++++++++++ 6 files changed, 82 insertions(+) create mode 100644 package/multimedia/gst-plugin-x170/Config.in create mode 100644 package/multimedia/gst-plugin-x170/gst-plugin-x170-01-correct-CFLAGS.patch create mode 100644 package/multimedia/gst-plugin-x170/gst-plugin-x170.mk create mode 100644 package/multimedia/on2-8170-libs/Config.in create mode 100644 package/multimedia/on2-8170-libs/on2-8170-libs.mk
package/multimedia/Config.in +2 -0
@@ -14,12 +14,14 @@ source "package/multimedia/gst-plugins-base/Config.in" source "package/multimedia/gst-plugins-good/Config.in" source "package/multimedia/gst-plugins-bad/Config.in" source "package/multimedia/gst-plugins-ugly/Config.in" +source "package/multimedia/gst-plugin-x170/Config.in" source "package/multimedia/lame/Config.in" source "package/multimedia/madplay/Config.in" source "package/multimedia/mpd/Config.in" source "package/multimedia/mpg123/Config.in" source "package/multimedia/mplayer/Config.in" source "package/multimedia/musepack/Config.in" +source "package/multimedia/on2-8170-libs/Config.in" source "package/opus-tools/Config.in" source "package/multimedia/pulseaudio/Config.in" source "package/multimedia/tidsp-binaries/Config.in"
package/multimedia/gst-plugin-x170/Config.in new file +10 -0
@@ -0,0 +1,10 @@ +config BR2_PACKAGE_GST_PLUGIN_X170 + bool "gst-plugin-x170" + depends on BR2_PACKAGE_GSTREAMER && BR2_arm926t + select BR2_PACKAGE_ON2_8170_LIBS + help + GStreamer plug-in to use the Hantro X170 video decoder present on + ATMEL AT91SAM9M10 SoC. + + http://www.at91.com/linux4sam/bin/view/Linux4SAM/SAM9M10Gstreamer +
package/multimedia/gst-plugin-x170/gst-plugin-x170-01-correct-CFLAGS.patch new file +28 -0
@@ -0,0 +1,28 @@ +The configure script is correctly getting the CFLAGS needed to compile a plugin +for gstreamer and storing them in GST_BASE_CFLAGS but the Makefiles are never +making use of those. + +We actually have to use AM_CPPFLAGS as AM_CFLAGS is used everywhere but on the +real compiling rule... + +Signed-off-by: Alexandre Belloni <[email protected]> +--- + src/Makefile.am | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/src/Makefile.am b/src/Makefile.am +index 8cb51d1..6af5d91 100644 +--- a/src/Makefile.am ++++ b/src/Makefile.am +@@ -5,6 +5,8 @@ + ############################################################################## + plugin_LTLIBRARIES = libgstx170.la + ++AM_CPPFLAGS = @GST_BASE_CFLAGS@ ++ + ############################################################################## + # for the next set of variables, rename the prefix if you renamed the .la, # + # e.g. libgstplugin_la_SOURCES => libmysomething_la_SOURCES # +-- +1.8.1.2 +
package/multimedia/gst-plugin-x170/gst-plugin-x170.mk new file +14 -0
@@ -0,0 +1,14 @@ +############################################################# +# +# gst-plugins-x170 +# +############################################################# +GST_PLUGIN_X170_VERSION = 1.0 +GST_PLUGIN_X170_SITE = ftp://ftp.linux4sam.org/pub/demo/linux4sam_1.9/codec/ + +# There is no generated configure script in the tarball. +GST_PLUGIN_X170_AUTORECONF = YES +GST_PLUGIN_X170_AUTORECONF_OPT = -Im4/ +GST_PLUGIN_X170_DEPENDENCIES = gstreamer libglib2 on2-8170-libs + +$(eval $(autotools-package))
package/multimedia/on2-8170-libs/Config.in new file +8 -0
@@ -0,0 +1,8 @@ +config BR2_PACKAGE_ON2_8170_LIBS + depends on BR2_arm926t + bool "on2-8170-libs" + help + Libraries for Hantro X170 video decoder + + http://www.at91.com/linux4sam/bin/view/Linux4SAM/SAM9M10Gstreamer +
package/multimedia/on2-8170-libs/on2-8170-libs.mk new file +20 -0
@@ -0,0 +1,20 @@ +############################################################# +# +# on2-8170-libs +# +############################################################# +ON2_8170_LIBS_VERSION = 1.0 +ON2_8170_LIBS_SITE = ftp://ftp.linux4sam.org/pub/demo/linux4sam_1.9/codec/ + +ON2_8170_LIBS_INSTALL_STAGING = YES + +define ON2_8170_LIBS_INSTALL_STAGING_CMDS + cp -dpf $(@D)/*.a $(@D)/*.so $(STAGING_DIR)/usr/lib + cp -dpf $(@D)/*.h $(STAGING_DIR)/usr/include +endef + +define ON2_8170_LIBS_INSTALL_TARGET_CMDS + cp -dpf $(@D)/*.so $(TARGET_DIR)/usr/lib +endef + +$(eval $(generic-package))
Signature · 1 line
1.8.1.2
PATCH 1/1 Add HW decoding support for Hantro x170
Dear Alexandre Belloni,
Quoted 6 lines · Alexandre Belloni
This actually consist in a set of proprietary libs, on2-8170-libs and a gstreamer plugin making use of those libraries.
on2-8170-libs is probably libc agnostic but this has not been tested thoroughly.
Quoted 8 lines
Signed-off-by Alexandre Belloni <[email protected]>--- package/multimedia/Config.in | 2 ++ package/multimedia/gst-plugin-x170/Config.in | 10 ++++++++ .../gst-plugin-x170-01-correct-CFLAGS.patch | 28 ++++++++++++++++++++++ .../multimedia/gst-plugin-x170/gst-plugin-x170.mk | 14 +++++++++++ package/multimedia/on2-8170-libs/Config.in | 8 +++++++ package/multimedia/on2-8170-libs/on2-8170-libs.mk | 20 ++++++++++++++++
We normally do separate patches for separate package additions. So a first patch for on2-8170-libs, and then a second patch with the gst-plugin.
package/multimedia/gst-plugin-x170/gst-plugin-x170.mk line 5
Quoted 11 lines
package/multimedia/gst-plugin-x170/gst-plugin-x170.mk new file +5
-0@@ -0,0 +1,14 @@ +############################################################# +# +# gst-plugins-x170 +# +#############################################################
On empty new line between header and variables please.
package/multimedia/gst-plugin-x170/gst-plugin-x170.mk line 7
Quoted 2 lines
package/multimedia/gst-plugin-x170/gst-plugin-x170.mk new file +2
-0+GST_PLUGIN_X170_VERSION = 1.0 +GST_PLUGIN_X170_SITE = ftp://ftp.linux4sam.org/pub/demo/linux4sam_1.9/codec/
You should add _LICENSE and _LICENSE_FILES variables as well.
package/multimedia/on2-8170-libs/Config.in line 7
Quoted 13 lines
package/multimedia/on2-8170-libs/Config.in new file +7
-0@@ -0,0 +1,8 @@ +config BR2_PACKAGE_ON2_8170_LIBS + depends on BR2_arm926t + bool "on2-8170-libs" + help + Libraries for Hantro X170 video decoder + + http://www.at91.com/linux4sam/bin/view/Linux4SAM/SAM9M10Gstreamer
As was pointed out in a previous review, this package contains pre-built library. And they can only work with glibc:
$ readelf -d libdwlx170.so | grep NEEDED 0x00000001 (NEEDED) Shared library: [libc.so.6]
This means that whenever something will try to load libdwlx170.so, it will try to find libc.so.6, which is glibc.
So your package should have something like:
depends on BR2_TOOLCHAIN_EXTERNAL_GLIBC || \ BR2_TOOLCHAIN_CTNG_eglibc || \ BR2_TOOLCHAIN_CTNG_glibc
with a comment above that explains why.
package/multimedia/on2-8170-libs/on2-8170-libs.mk line 5
Quoted 11 lines
package/multimedia/on2-8170-libs/on2-8170-libs.mk new file +5
-0@@ -0,0 +1,20 @@ +############################################################# +# +# on2-8170-libs +# +#############################################################
Missing empty line.
package/multimedia/on2-8170-libs/on2-8170-libs.mk line 7
Quoted 2 lines
package/multimedia/on2-8170-libs/on2-8170-libs.mk new file +2
-0+ON2_8170_LIBS_VERSION = 1.0 +ON2_8170_LIBS_SITE = ftp://ftp.linux4sam.org/pub/demo/linux4sam_1.9/codec/
_LICENSE and _LICENSE_FILES.
package/multimedia/on2-8170-libs/on2-8170-libs.mk line 20
Quoted 13 lines
package/multimedia/on2-8170-libs/on2-8170-libs.mk new file +13
-0+ +ON2_8170_LIBS_INSTALL_STAGING = YES + +define ON2_8170_LIBS_INSTALL_STAGING_CMDS + cp -dpf $(@D)/*.a $(@D)/*.so $(STAGING_DIR)/usr/lib + cp -dpf $(@D)/*.h $(STAGING_DIR)/usr/include +endef + +define ON2_8170_LIBS_INSTALL_TARGET_CMDS + cp -dpf $(@D)/*.so $(TARGET_DIR)/usr/lib +endef + +$(eval $(generic-package))
Thanks!
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 Add HW decoding support for Hantro x170
Hi Alexandre, Thomas.
Quoted 9 lines · Thomas Petazzoni
As was pointed out in a previous review, this package contains pre-built library. And they can only work with glibc:
$ readelf -d libdwlx170.so | grep NEEDED 0x00000001 (NEEDED) Shared library: [libc.so.6]This means that whenever something will try to load libdwlx170.so, it will try to find libc.so.6, which is glibc.
Quoted 7 lines
So your package should have something like:
depends on BR2_TOOLCHAIN_EXTERNAL_GLIBC || \ BR2_TOOLCHAIN_CTNG_eglibc || \ BR2_TOOLCHAIN_CTNG_glibcwith a comment above that explains why.
Indeed, this is true. I spent some time trying to get this hardware decoder to work, and never managed to get anywhere with it. Atmel technical support were incredibly frustrating, providing such pearls of wisdom as:
"We found that there might be a little problem if you we use dynamic libraries like cannot play video correctly. Our OS experts are still working on this."
On the basis of this and other information provided by Atmel, I ended up using the static libraries. This complicates the package makefiles somewhat, of course; but you can presumably then avoid the restriction to glibc.
Alexandre: have you actually managed to get the decoder to work?
Simon.
PATCH 1/1 Add HW decoding support for Hantro x170
Quoted 5 lines · Simon Dawson
Indeed, this is true. I spent some time trying to get this hardware decoder to work, and never managed to get anywhere with it. Atmel technical support were incredibly frustrating, providing such pearls of wisdom as:
Quoted 8 lines
"We found that there might be a little problem if you we use dynamic libraries like cannot play video correctly. Our OS experts are still working on this."
On the basis of this and other information provided by Atmel, I ended up using the static libraries. This complicates the package makefiles somewhat, of course; but you can presumably then avoid the restriction to glibc.
That's a nice idea, I doubt on2-8170-libs would ever be used without the gstreamer plugin.
Quoted 1 line
Alexandre: have you actually managed to get the decoder to work?
It has been working but I don't remember all the specific. That is something I did quickly for a customer having to create a demo for an exhibition so the buildroot integration was not really in the scope.
Quoted 5 lines
Simon.
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 3 lines
Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com