Wandboard: Add support for Wandboard quad
PATCH 1/1 Wandboard: Add support for Wandboard quad
Add support for the Wandboard quad.
--- boards.cfg | 1 + include/configs/wandboard.h | 2 ++ 2 files changed, 3 insertions(+)
boards.cfg +1 -0
@@ -268,6 +268,7 @@ nitrogen6s arm armv7 nitrogen6x boundar nitrogen6s1g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024 wandboard_dl arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 wandboard_solo arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512 +wandboard_quad arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048 cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3
include/configs/wandboard.h +2 -0
@@ -85,6 +85,8 @@#define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb"#elif defined(CONFIG_MX6S )#define CONFIG_DEFAULT_FDT_FILE "imx6s-wandboard.dtb" +#elif defined(CONFIG_MX6Q ) +#define CONFIG_DEFAULT_FDT_FILE "imx6q-wandboard.dtb"#endif #define CONFIG_EXTRA_ENV_SETTINGS \
Signature · 1 line
1.8.0.3
PATCH 1/1 Wandboard: Add support for Wandboard quad
Hi Tapani,
Quoted 9 lines · Tapani Utriainen
Add support for the Wandboard quad.
Signed-off-by Tapani Utriainen <[email protected]>--- boards.cfg | 1 + include/configs/wandboard.h | 2 ++ 2 files changed, 3 insertions(+)
It looks good.
Could you also add an entry for the quad version into the README file?
Regards,
Fabio Estevam
PATCH 1/1 Wandboard: Add support for Wandboard quad
Quoted 13 lines · On Mon, 27 May 2013 07:22:42 -0300 Fabio Estevam <[email protected]> wrote:
Hi Tapani,
Quoted 9 lines · Tapani Utriainen
Add support for the Wandboard quad.
Signed-off-by Tapani Utriainen <[email protected]>--- boards.cfg | 1 + include/configs/wandboard.h | 2 ++ 2 files changed, 3 insertions(+)
Quoted 7 lines
It looks good.
Could you also add an entry for the quad version into the README file?
Regards,
Fabio Estevam
Fabio,
thank you, will do (resubmitting a v2).
//Tapani
PATCH 1/1 Wandboard: Add support for Wandboard quad
In reply to Tapani UtriainenQuoted 20 lines · Tapani Utriainen
Add support for the Wandboard quad.
Signed-off-by Tapani Utriainen <[email protected]>--- boards.cfg | 1 + include/configs/wandboard.h | 2 ++ 2 files changed, 3 insertions(+)boards.cfg +0
-0@@ -268,6 +268,7 @@ nitrogen6s arm armv7nitrogen6x boundar
nitrogen6s1g arm armv7 nitrogen6x
boundary mx6
nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024
wandboard_dlarm armv7 wandboard -
Quoted 9 lines
mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 wandboard_solo arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512 +wandboard_quad arm armv7 wandboard - mx6wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048
Please put quad, dl and solo in order. It is now dl, solo, quad.
Quoted 11 lines
cm_t35arm armv7cm_t35
- omap3
omap3_overoarm armv7 overoboards.cfg +0
-2- omap3 omap3_pandora arm armv7 pandora - omap3include/configs/wandboard.h +0
-0
include/configs/wandboard.h line 91
Quoted 7 lines
include/configs/wandboard.h +2
-0@@ -85,6 +85,8 @@#define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb"#elif defined(CONFIG_MX6S )#define CONFIG_DEFAULT_FDT_FILE "imx6s-wandboard.dtb" +#elif defined(CONFIG_MX6Q ) +#define CONFIG_DEFAULT_FDT_FILE "imx6q-wandboard.dtb"#endif
Same here.
Quoted 8 lines
include/configs/wandboard.h +0
-1#define CONFIG_EXTRA_ENV_SETTINGS \ --1.8.0.3
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 3 lines
Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
PATCH 1/1 Wandboard: Add support for Wandboard quad
Quoted 47 lines · Otavio Salvador
Quoted 27 lines · Tapani Utriainen
Add support for the Wandboard quad.
Signed-off-by Tapani Utriainen <[email protected]>--- boards.cfg | 1 + include/configs/wandboard.h | 2 ++ 2 files changed, 3 insertions(+)boards.cfg +0
-0@@ -268,6 +268,7 @@ nitrogen6s arm armv7nitrogen6x boundar
nitrogen6s1g arm armv7 nitrogen6x
boundary mx6
nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024
wandboard_dlarm armv7 wandboard
- mx6
wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024
wandboard_soloarm armv7 wandboard
- mx6
wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512boards.cfg +1
-1+wandboard_quad arm armv7 wandboard - mx6Quoted 2 lines
wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048
Please put quad, dl and solo in order. It is now dl, solo, quad.
Quoted 12 lines
cm_t35arm armv7cm_t35
- omap3
omap3_overoarm armv7 overoboards.cfg +0
-2- omap3 omap3_pandora arm armv7 pandora - omap3include/configs/wandboard.h +0
-0@@ -85,6 +85,8 @@#define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb"
Quoted 13 lines
include/configs/wandboard.h line 91
Quoted 6 lines
include/configs/wandboard.h +2
-0#elif defined(CONFIG_MX6S )#define CONFIG_DEFAULT_FDT_FILE "imx6s-wandboard.dtb" +#elif defined(CONFIG_MX6Q ) +#define CONFIG_DEFAULT_FDT_FILE "imx6q-wandboard.dtb"#endif Same here.
Quoted 2 lines
include/configs/wandboard.h +0
-0#define CONFIG_EXTRA_ENV_SETTINGS \
I have sent two patches for adding the Boot Splash with Wandboard logo. Please take a look on them and if you agree please base on this to avoid conflicts.
(For easyness: http://patchwork.ozlabs.org/bundle/otavio/wandboard-20130527/
)
Signature · 3 lines
Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
PATCH 1/1 Wandboard: Add support for Wandboard quad
Quoted 7 lines · On Mon, 27 May 2013 13:56:30 -0300 Otavio Salvador <[email protected]>…
I have sent two patches for adding the Boot Splash with Wandboard logo. Please take a look on them and if you agree please base on this to avoid conflicts.
(For easyness: http://patchwork.ozlabs.org/bundle/otavio/wandboard-20130527/
)
Otavio,
while I do agree with the work you are doing (HDMI bootlogo into mainline), and would not have minded to base my patches on top of yours. However, the patches you sent seem to have been NAK:ed. The v3 does not apply on top of 2013.04 (maybe I am basing on the wrong release!?).
So for now, I am basing the resubmission on the 2013.04 release.
regards,
//Tapani
PATCH 1/1 Wandboard: Add support for Wandboard quad
On 28/05/2013 09:44, Tapani Utriainen wrote:
Hi Tapani,
Quoted 10 lines
Otavio,
while I do agree with the work you are doing (HDMI bootlogo into mainline), and would not have minded to base my patches on top of yours. However, the patches you sent seem to have been NAK:ed. The v3 does not apply on top of 2013.04 (maybe I am basing on the wrong release!?).
So for now, I am basing the resubmission on the 2013.04 release.
regards,
Even if you are not constrained to take care of underlying patches (this can maybe discussed in this mailing list if it is strictly required, but of course it helps to avoid conflicts), it is not correct to stick with a release. Basis for development is TOT on git.denx.de/u-boot.git, or, for the i.MXes, git.denx.de/u-boot-imx.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/1 Wandboard: Add support for Wandboard quad
In reply to Tapani UtriainenQuoted 14 lines · Tapani Utriainen
Quoted 5 lines · On Mon, 27 May 2013 13:56:30 -0300 Otavio Salvador <[email protected]>…
I have sent two patches for adding the Boot Splash with Wandboard logo. Please take a look on them and if you agree please base on this to avoid conflicts.
(For easyness:
http://patchwork.ozlabs.org/bundle/otavio/wandboard-20130527/
Quoted 2 lines
)
Otavio,
Quoted 8 lines
while I do agree with the work you are doing (HDMI bootlogo into mainline), and would not have minded to base my patches on top of yours. However, the patches you sent seem to have been NAK:ed. The v3 does not apply
on top of 2013.04 (maybe I am basing on the wrong release!?).So for now, I am basing the resubmission on the 2013.04 release.
You must base on imx/master as this is the custodian tree for upcoming 2013.07 release.
Signature · 3 lines
Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750