ASoC: wm0010: Set IRQ as a wake source
Subsystems (3)
PATCH 1/1 ASoC: wm0010: Set IRQ as a wake source
The DSPs IRQ should be a wake source as several of the possible algorithms may run whilst the AP is asleepi and require to wake the AP to push or pull more data, such as compressed playback.
Signed-off-by Charles Keepax <[email protected]>
--- sound/soc/codecs/wm0010.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)
sound/soc/codecs/wm0010.c +7 -0
@@ -972,6 +972,13 @@ static int wm0010_spi_probe(struct spi_device *spi) } wm0010->irq = irq; + ret =irq_set_irq_wake (irq,1 ); +if (ret) { +dev_err (wm0010->dev,"Failed to set IRQ %d as wake source: %d\n" , + irq, ret); +return ret; + } +if (spi->max_speed_hz) wm0010->board_max_spi_speed = spi->max_speed_hz;else
Signature · 1 line
1.7.2.5
Quoted 3 lines · Charles Keepax
The DSPs IRQ should be a wake source as several of the possible algorithms may run whilst the AP is asleepi and require to wake the AP to push or pull more data, such as compressed playback.
Applied, thanks.