dmatest: add ability to disable pq and xor
PATCH 1/1 dmatest: add ability to disable pq and xor
dmatest would create a thread to stress XOR and PQ, if the capability is present in the hardware. Add the ability to disable XOR and PQ by disabling it if *_sources are set to zero.
--- drivers/dma/dmatest.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/dmatest.c +2 -2
@@ -904,11 +904,11 @@ static int dmatest_add_channel(struct dmatest_info *info, cnt =dmatest_add_threads (info, dtc,DMA_MEMCPY ); thread_count += cnt >0 ? cnt :0 ; } -if (dma_has_cap (DMA_XOR , dma_dev->cap_mask)) { +if (dma_has_cap (DMA_XOR , dma_dev->cap_mask) && xor_sources) { cnt =dmatest_add_threads (info, dtc,DMA_XOR ); thread_count += cnt >0 ? cnt :0 ; } -if (dma_has_cap (DMA_PQ , dma_dev->cap_mask)) { +if (dma_has_cap (DMA_PQ , dma_dev->cap_mask) && pq_sources) { cnt =dmatest_add_threads (info, dtc,DMA_PQ ); thread_count += cnt >0 ? cnt :0 ; }
Signature · 1 line
1.7.9.5
Quoted 3 lines · Jon Mason
dmatest would create a thread to stress XOR and PQ, if the capability is present in the hardware. Add the ability to disable XOR and PQ by disabling it if
*_sourcesare set to zero.
Sorry, didn't comment this earlier.
Those threads are independent including MEMCPY stuff. I think it's better to have one additional parameter let's say type_of_test where you can set
1 for MEMCPY
2 for XOR
4 for PQ
Share this parameter via debugfs and use 0x07 as default value. I doubt we need this as a module parameter.
--
With Best Regards,
Andy Shevchenko
Quoted 14 lines · Andy Shevchenko
Quoted 3 lines · Jon Mason
dmatest would create a thread to stress XOR and PQ, if the capability is present in the hardware. Add the ability to disable XOR and PQ by disabling it if
*_sourcesare set to zero.Sorry, didn't comment this earlier.
Those threads are independent including MEMCPY stuff. I think it's better to have one additional parameter let's say
type_of_testwhere you can set
1 for MEMCPY
2 for XOR
4 for PQ
Quoted 2 lines
Share this parameter via debugfs and use
0x07as default value. I doubt we need this as a module parameter.
This is using the existing module parameter, so there is nothing new added. Since the testing is started immediately upon module insertion, there needs to be a way to prevent it from ever starting.
Thanks,
Jon
Quoted 4 lines
--
With Best Regards,
Andy Shevchenko
Quoted 15 lines · Jon Mason
Quoted 14 lines · Andy Shevchenko
Quoted 3 lines · Jon Mason
dmatest would create a thread to stress XOR and PQ, if the capability is present in the hardware. Add the ability to disable XOR and PQ by disabling it if
*_sourcesare set to zero.Sorry, didn't comment this earlier.
Those threads are independent including MEMCPY stuff. I think it's better to have one additional parameter let's say
type_of_testwhere you can set
1 for MEMCPY
2 for XOR
4 for PQ
Quoted 5 lines
Quoted 2 lines
Share this parameter via debugfs and use
0x07as default value. I doubt we need this as a module parameter.This is using the existing module parameter, so there is nothing new added.
That's why it's a bit confusing. User can more easily forget the 'magic' numbers. And I see no reason to prevent user to enter 0 as a number of sources.
Moreover, your patch doesn't cover the case when user doesn't want to run MEMCPY thread.
Quoted 2 lines
Since the testing is started immediately upon module
insertion,
It used to be so, but nowadays it's true only when dmatest is compiled in. If someone wants to compile in that module they probably want to run stress tests, where XOR and PQ might be useful.
Quoted 1 line
there needs to be a way to prevent it from ever starting.
My opinion I already shared, new node under debugfs. There is might be a good reason to add a new module parameter as well.
--
With Best Regards,
Andy Shevchenko
Quoted 20 lines · Andy Shevchenko
Quoted 19 lines · Jon Mason
Quoted 17 lines · Andy Shevchenko
Quoted 1 line · Jon Mason
dmatest would create a thread to stress XOR and PQ, if the
capability is
Quoted 2 lines
present in the hardware. Add the ability to disable XOR and PQ by disabling it if
*_sourcesare set to zero.Sorry, didn't comment this earlier.
Those threads are independent including MEMCPY stuff. I think it's better to have one additional parameter let's say
type_of_testwhere you can set
1 for MEMCPY
2 for XOR
4 for PQShare this parameter via debugfs and use
0x07as default value. I doubt we need this as a module parameter.
Quoted 6 lines
Quoted 2 lines
This is using the existing module parameter, so there is nothing new added.
That's why it's a bit confusing. User can more easily forget the 'magic' numbers. And I see no reason to prevent user to enter 0 as a number of sources.
Well, source counts less than 2 are invalid for these operations, but that is besides the point.
Quoted 2 lines
Moreover, your patch doesn't cover the case when user doesn't want to run MEMCPY thread.
Yes, this is what I wanted to point out. If we're adding per operation type selection, might as well enable memcpy to be controlled too. Especially if we just use a bitmap_and() with the dma_cap_mask() to pick which tests to run. Might also encourage some slave-op test types to be added as well.
Quoted 7 lines
Quoted 3 lines
Since the testing is started immediately upon module
insertion,It used to be so, but nowadays it's true only when dmatest is compiled in. If someone wants to compile in that module they probably want to run stress tests, where XOR and PQ might be useful.
...and they would want the test selection to be specified on the kernel command line. At least that's how I used compiled in dmatest in the past.
Quoted 5 lines
Quoted 2 lines
there needs to be a way to prevent it from ever starting.
My opinion I already shared, new node under debugfs. There is might be a good reason to add a new module parameter as well.
I'm not seeing why debugfs is helpful here. Just make it a module parameter that calls a routine to setup the bit mask.
--
Dan
Quoted 3 lines · Dan Williams
Quoted 2 lines · Andy Shevchenko
Quoted 1 line · Jon Mason
On Fri, May 31, 2013 at 11:22:10AM +0300, Andy Shevchenko wrote:
[]
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Since the testing is started immediately upon module
insertion,It used to be so, but nowadays it's true only when dmatest is compiled in. If someone wants to compile in that module they probably want to run stress tests, where XOR and PQ might be useful.
...and they would want the test selection to be specified on the kernel command line. At least that's how I used compiled in dmatest in the past.
Actually you're right. Better to have it in that case too.
Quoted 5 lines
Quoted 2 lines
My opinion I already shared, new node under debugfs. There is might be a good reason to add a new module parameter as well.
I'm not seeing why debugfs is helpful here. Just make it a module parameter that calls a routine to setup the bit mask.
I'm not objecting against module parameter, though I would like to see debugfs node for that as well.
--
With Best Regards,
Andy Shevchenko