linux: Fix uImage with appended DTs generation
PATCH 1/1 linux: Fix uImage with appended DTs generation
Fixes bug #5516 - appended device tree blobs on uImage fails
Before version 3.7 of the kernel, building the zImage and then the uImage will rewrite the zImage in the process, removing the device tree we just appended.
Use mkimage to append the device tree to the uImage and rebuild the headers directly.
--- linux/linux.mk | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
linux/linux.mk +11 -3
@@ -228,9 +228,17 @@ define LINUX_APPEND_DTB fi >> $(KERNEL_ARCH_PATH)/boot/zImage endef ifeq ($(BR2_LINUX_KERNEL_APPENDED_UIMAGE),y) -# We need to generate the uImage here after that so that the uImage is -# generated with the right image size. -LINUX_APPEND_DTB += $(sep)$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) uImage +# We need to generate a new u-boot image that takes into +# account the extra-size added by the device tree at the end +# of the image. To do so, we first need to retrieve both load +# address and entry point for the kernel from the already +# generate uboot image before using mkimage -l. +LINUX_APPEND_DTB += $(sep) LOAD=`$(HOST_DIR)/usr/bin/mkimage -l $(LINUX_IMAGE_PATH) |\ + sed -n 's/Load Address: \([0-9]*\)/\1/p'`; \ + ENTRY=`$(HOST_DIR)/usr/bin/mkimage -l $(LINUX_IMAGE_PATH) |\ + sed -n 's/Entry Point: \([0-9]*\)/\1/p'`; \ + $(HOST_DIR)/usr/bin/mkimage -A $(KERNEL_ARCH) -O linux -T kernel -C none -a $${LOAD} -e $${ENTRY} \ + -n 'Linux Buildroot' -d $(KERNEL_ARCH_PATH)/boot/zImage $(LINUX_IMAGE_PATH); endif endif
Signature · 1 line
1.8.2.3
PATCH 1/1 linux: Fix uImage with appended DTs generation
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Maxime" == Maxime Ripard <[email protected]> writes:
Maxime> Fixes bug #5516 - appended device tree blobs on uImage fails Maxime> Before version 3.7 of the kernel, building the zImage and then the Maxime> uImage will rewrite the zImage in the process, removing the device tree Maxime> we just appended.
Maxime> Use mkimage to append the device tree to the uImage and rebuild the Maxime> headers directly.
Maxime> Signed-off-by: Maxime Ripard <[email protected]> Maxime> ---
Maxime> linux/linux.mk | 14 +++++++++++---
Maxime> 1 file changed, 11 insertions(+), 3 deletions(-)
Maxime> diff --git a/linux/linux.mk b/linux/linux.mk Maxime> index 3877c35..a1166e5 100644 Maxime> --- a/linux/linux.mk
Maxime> +++ b/linux/linux.mk
Maxime> @@ -228,9 +228,17 @@ define LINUX_APPEND_DTB
Maxime> fi >> $(KERNEL_ARCH_PATH)/boot/zImage Maxime> endef Maxime> ifeq ($(BR2_LINUX_KERNEL_APPENDED_UIMAGE),y)
Maxime> -# We need to generate the uImage here after that so that the uImage is Maxime> -# generated with the right image size.
Maxime> -LINUX_APPEND_DTB += $(sep)$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) uImage Maxime> +# We need to generate a new u-boot image that takes into
Maxime> +# account the extra-size added by the device tree at the end
Maxime> +# of the image. To do so, we first need to retrieve both load
Maxime> +# address and entry point for the kernel from the already
Maxime> +# generate uboot image before using mkimage -l.
This doesn't seem right. APPENDED_UIMAGE implies APPENDED_DTB, which only builds a zImage, so there isn't any uImage to get the load address / entry point from.
Maxime> +LINUX_APPEND_DTB += $(sep) LOAD=`$(HOST_DIR)/usr/bin/mkimage -l $(LINUX_IMAGE_PATH) |\
Maxime> + sed -n 's/Load Address: \([0-9]*\)/\1/p'`; \
Maxime> + ENTRY=`$(HOST_DIR)/usr/bin/mkimage -l $(LINUX_IMAGE_PATH) |\
Maxime> + sed -n 's/Entry Point: \([0-9]*\)/\1/p'`; \
Maxime> + $(HOST_DIR)/usr/bin/mkimage -A $(KERNEL_ARCH) -O linux -T kernel -C none -a $${LOAD} -e $${ENTRY} \
Maxime> + -n 'Linux Buildroot' -d $(KERNEL_ARCH_PATH)/boot/zImage $(LINUX_IMAGE_PATH);These regexps don't make much sense to me as the values are in hexidecimal (E.G. prefixed with 0x) and the Entry Point: line as an extra space before the numbers.
It would also be good to keep the previous name instead of hardcoding Linux Buildroot.
I think it is simpler and cleaner to simply create the mkimage command line with a single sed invocation, E.G. something like:
LINUX_APPEND_DTB += $(sep) MKIMAGE_ARGS=`$(HOST_DIR)/usr/bin/mkimage -l $(LINUX_IMAGE_PATH) |\
sed -n -e 's/Image Name:[ ]*\(.*\)/-n "\1"/p' -e 's/Load Address:/-a/' -e 's/Entry Point:/-e/'`; \
$(HOST_DIR)/usr/bin/mkimage -A $(KERNEL_ARCH) -O linux \
-T kernel -C none $${MKIMAGE_ARGS} \
-d $(KERNEL_ARCH_PATH)/boot/zImage $(LINUX_IMAGE_PATH);(Construct the needed -n / -a / -e options in place).
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 linux: Fix uImage with appended DTs generation
Hi Peter,
Quoted 32 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Maxime" == Maxime Ripard <[email protected]> writes:
Maxime> Fixes bug #5516 - appended device tree blobs on uImage fails Maxime> Before version 3.7 of the kernel, building the zImage and then the Maxime> uImage will rewrite the zImage in the process, removing the device tree Maxime> we just appended.
Maxime> Use mkimage to append the device tree to the uImage and rebuild the Maxime> headers directly.
Maxime> Signed-off-by: Maxime Ripard <[email protected]> Maxime> ---
Maxime> linux/linux.mk | 14 +++++++++++---Maxime> 1 file changed, 11 insertions(+), 3 deletions(-)
Maxime> diff --git
a/linux/linux.mkb/linux/linux.mkMaxime> index 3877c35..a1166e5 100644 Maxime> ---a/linux/linux.mk
Maxime> +++b/linux/linux.mk
Maxime> @@ -228,9 +228,17 @@ defineLINUX_APPEND_DTBMaxime> fi >> $(KERNEL_ARCH_PATH)/boot/zImage Maxime> endef Maxime> ifeq ($(BR2_LINUX_KERNEL_APPENDED_UIMAGE),y)Maxime> -# We need to generate the uImage here after that so that the uImage is Maxime> -# generated with the right image size.
Maxime> -LINUX_APPEND_DTB += $(sep)$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) uImage Maxime> +# We need to generate a new u-boot image that takes into
Maxime> +# account the extra-size added by the device tree at the end
Maxime> +# of the image. To do so, we first need to retrieve both load
Maxime> +# address and entry point for the kernel from the already
Maxime> +# generate uboot image before using mkimage -l.
Quoted 3 lines
This doesn't seem right.
APPENDED_UIMAGEimpliesAPPENDED_DTB, which only builds a zImage, so there isn't any uImage to get the load address / entry point from.
Hmmm, right.
I don't see how it could have worked in the first place during my tests, except maybe because of an uncleaned workspace. I'll send a v2.
Quoted 18 lines
Maxime> +LINUX_APPEND_DTB += $(sep) LOAD=`$(HOST_DIR)/usr/bin/mkimage -l $(LINUX_IMAGE_PATH) |\
Maxime> + sed -n 's/Load Address: \([0-9]*\)/\1/p'`; \ Maxime> + ENTRY=`$(HOST_DIR)/usr/bin/mkimage -l $(LINUX_IMAGE_PATH) |\ Maxime> + sed -n 's/Entry Point: \([0-9]*\)/\1/p'`; \ Maxime> + $(HOST_DIR)/usr/bin/mkimage -A $(KERNEL_ARCH) -O linux -T kernel -C none -a $${LOAD} -e $${ENTRY} \ Maxime> + -n 'Linux Buildroot' -d $(KERNEL_ARCH_PATH)/boot/zImage $(LINUX_IMAGE_PATH);These regexps don't make much sense to me as the values are in hexidecimal (E.G. prefixed with 0x) and the Entry Point: line as an extra space before the numbers.
It would also be good to keep the previous name instead of hardcoding Linux Buildroot.
I think it is simpler and cleaner to simply create the mkimage command line with a single sed invocation, E.G. something like:
Quoted 7 lines
LINUX_APPEND_DTB += $(sep) MKIMAGE_ARGS=`$(HOST_DIR)/usr/bin/mkimage -l $(LINUX_IMAGE_PATH) |\ sed -n -e 's/Image Name:[ ]*\(.*\)/-n "\1"/p' -e 's/Load Address:/-a/' -e 's/Entry Point:/-e/'`; \ $(HOST_DIR)/usr/bin/mkimage -A $(KERNEL_ARCH) -O linux \ -T kernel -C none $${MKIMAGE_ARGS} \ -d $(KERNEL_ARCH_PATH)/boot/zImage $(LINUX_IMAGE_PATH);(Construct the needed -n / -a / -e options in place).
Yep, Ok, will do.
Thanks!
Maxime