xfstests: generic/313, test sgid inheritance on subdirs
PATCH 1/1 xfstests: generic/313, test sgid inheritance on subdirs
On XFS this test fails today due to some over-eager SGID removal in xfs core code; ext4 & btrfs pass. Document it in a test, will send xfs patch in a bit.
---
p.s. I'm going to just flaunt my ignorance and say:
I've never understood acls well. I'm hoping someone who does can help me write a better changelog, because this one is no good at all!
tests/generic/313 new file +67 -0
@@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# Test SGID inheritance on subdirectories +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs generic +_require_acls +_require_user +_need_to_be_root + +rm -rf $TEST_DIR/$seq-dir + +# Make dir owned by qa user, and an unrelated group: +mkdir $TEST_DIR/$seq-dir +chown $qa_user:12345 $TEST_DIR/$seq-dir + +# Make parent dir sgid +chmod 2775 $TEST_DIR/$seq-dir + +# Make subdirs before & after acl set +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir" +su $qa_user -c "setfacl -m u:$qa_user:rwx,d:u:$qa_user:rwx $TEST_DIR/$seq-dir" +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir2" + +# Both subdirs should have inherited sgid +ls -ld $TEST_DIR/$seq-dir/subdir* | _filter_test_dir | awk '{print $1,$NF}' + +status=0 +exit
tests/generic/313.out new file +3 -0
@@ -0,0 +1,3 @@ +QA output created by 313 +drwxr-sr-x. TEST_DIR/313-dir/subdir +drwxrwsr-x+ TEST_DIR/313-dir/subdir2
tests/generic/group +1 -0
@@ -115,3 +115,4 @@ 310 auto 311 auto metadata log 312 auto quick prealloc enospc +313 auto quick acl
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
PATCH v2 1/1 xfstests: generic/313, test sgid inheritance on subdirs
On XFS this test fails today due to some over-eager SGID removal in xfs core code; ext4 & btrfs pass. Document it in a test, will send xfs patch in a bit.
---
p.s. I'm going to just flaunt my ignorance and say:
I've never understood acls well. I'm hoping someone who does can help me write a better changelog, because this one is no good at all!
V2: add missing source of "attr" file for _require_acls
tests/generic/313 new file +68 -0
@@ -0,0 +1,68 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# Test SGID inheritance on subdirectories +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/attr + +# real QA test starts here +_supported_fs generic +_require_acls +_require_user +_need_to_be_root + +rm -rf $TEST_DIR/$seq-dir + +# Make dir owned by qa user, and an unrelated group: +mkdir $TEST_DIR/$seq-dir +chown $qa_user:12345 $TEST_DIR/$seq-dir + +# Make parent dir sgid +chmod 2775 $TEST_DIR/$seq-dir + +# Make subdirs before & after acl set +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir" +su $qa_user -c "setfacl -m u:$qa_user:rwx,d:u:$qa_user:rwx $TEST_DIR/$seq-dir" +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir2" + +# Both subdirs should have inherited sgid +ls -ld $TEST_DIR/$seq-dir/subdir* | _filter_test_dir | awk '{print $1,$NF}' + +status=0 +exit
tests/generic/313.out new file +3 -0
@@ -0,0 +1,3 @@ +QA output created by 313 +drwxr-sr-x. TEST_DIR/313-dir/subdir +drwxrwsr-x+ TEST_DIR/313-dir/subdir2
tests/generic/group +1 -0
@@ -115,3 +115,4 @@ 310 auto 311 auto metadata log 312 auto quick prealloc enospc +313 auto quick acl
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
I'm personally working on this bug with Eric, and the test properly trigger the bug on 100% of the test runs, but, it should also ensure that irix_sgid_inherit sysctl is set to 0, if not, the test will fail.
follow is a suggestion for a better changelog:
Tests if subdirectories created on the filesystem will properly inherit sgid bit when this is set on the parent directory, once the process has the properly permissions to create a subdirectory, this, should inherit parent's sgid bit if this is set and irix_sgid_inherit sysctl is disabled.
Thanks for the test Eric, very helpful :)
Quoted 111 lines · Eric Sandeen
On XFS this test fails today due to some over-eager SGID removal in xfs core code; ext4 & btrfs pass. Document it in a test, will send xfs patch in a bit.
Signed-off-by Eric Sandeen <[email protected]>---
p.s. I'm going to just flaunt my ignorance and say:
I've never understood acls well. I'm hoping someone who does can help me write a better changelog, because this one is no good at all!V2: add missing source of "attr" file for
_require_aclstests/generic/313 new file +68
-0@@ -0,0 +1,68 @@ +#! /bin/bash +# FS QA Test No. 313 +# +# Test SGID inheritance on subdirectories +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/attr + +# real QA test starts here +_supported_fs generic +_require_acls +_require_user +_need_to_be_root + +rm -rf $TEST_DIR/$seq-dir + +# Make dir owned by qa user, and an unrelated group: +mkdir $TEST_DIR/$seq-dir +chown $qa_user:12345 $TEST_DIR/$seq-dir + +# Make parent dir sgid +chmod 2775 $TEST_DIR/$seq-dir + +# Make subdirs before & after acl set +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir" +su $qa_user -c "setfacl -m u:$qa_user:rwx,d:u:$qa_user:rwx $TEST_DIR/$seq-dir" +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir2" + +# Both subdirs should have inherited sgid +ls -ld $TEST_DIR/$seq-dir/subdir* | _filter_test_dir | awk '{print $1,$NF}' + +status=0 +exittests/generic/313.out new file +3
-0@@ -0,0 +1,3 @@ +QA output created by 313 +drwxr-sr-x. TEST_DIR/313-dir/subdir +drwxrwsr-x+ TEST_DIR/313-dir/subdir2tests/generic/group +1
-0@@ -115,3 +115,4 @@ 310 auto 311 auto metadata log 312 auto quick prealloc enospc +313 auto quick acl_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Signature · 6 lines
Carlos _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Hey Carlos & Eric,
Quoted 10 lines · Carlos Maiolino
I'm personally working on this bug with Eric, and the test properly trigger the bug on 100% of the test runs, but, it should also ensure that
irix_sgid_inheritsysctl is set to 0, if not, the test will fail.follow is a suggestion for a better changelog:
Tests if subdirectories created on the filesystem will properly inherit sgid bit when this is set on the parent directory, once the process has the properly permissions to create a subdirectory, this, should inherit parent's sgid bit if this is set and
irix_sgid_inheritsysctl is disabled.
I applied this and tested with Carlos's latest patch:
generic/313 - output mismatch (see /root/xfstests/results/generic/313.out.bad)
--- tests/generic/313.out 2013-07-08 16:27:41.787710646 -0500
+++ /root/xfstests/results/generic/313.out.bad 2013-07-08 16:47:46.052683735 -0500
@@ -1,3 +1,3 @@
QA output created by 313
-drwxr-sr-x. TEST_DIR/313-dir/subdir
+drwxr-sr-x TEST_DIR/313-dir/subdir
drwxrwsr-x+ TEST_DIR/313-dir/subdir2
...
(Run 'diff -u tests/generic/313.out /root/xfstests/results/generic/313.out.bad' to see the entire diff)Looks like there could be a problem with ls? Have you seen that?
Thanks,
Ben
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 27 lines · Ben Myers
Hey Carlos & Eric,
Quoted 10 lines · Carlos Maiolino
I'm personally working on this bug with Eric, and the test properly trigger the bug on 100% of the test runs, but, it should also ensure that
irix_sgid_inheritsysctl is set to 0, if not, the test will fail.follow is a suggestion for a better changelog:
Tests if subdirectories created on the filesystem will properly inherit sgid bit when this is set on the parent directory, once the process has the properly permissions to create a subdirectory, this, should inherit parent's sgid bit if this is set and
irix_sgid_inheritsysctl is disabled.I applied this and tested with Carlos's latest patch:
generic/313 - output mismatch (see
/root/xfstests/results/generic/313.out.bad)--- tests/generic/313.out 2013-07-08 16:27:41.787710646 -0500 +++ /root/xfstests/results/generic/313.out.bad 2013-07-08 16:47:46.052683735 -0500 @@ -1,3 +1,3 @@ QA output created by 313 -drwxr-sr-x. TEST_DIR/313-dir/subdir +drwxr-sr-x TEST_DIR/313-dir/subdir drwxrwsr-x+ TEST_DIR/313-dir/subdir2 ... (Run 'diff -u tests/generic/313.out /root/xfstests/results/generic/313.out.bad' to see the entire diff)
Quoted 5 lines
Looks like there could be a problem with ls? Have you seen that?
Thanks,
Ben
Actually I don't think this is a problem, but the way newer ls versions are displaying the object permissions (the 'dot' at the end of the permissions, indicating there are no extra attributes).
I'm going to take a look on what's going on, but I still believe it's just a matter of add the 'dot' to the xfstests correct output.
I had this same problem when testing my patch and needed to fix it locally, but missed to warn you guys, my apologies
Signature · 6 lines
Carlos _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Quoted 21 lines
Quoted 12 lines
generic/313 - output mismatch (see
/root/xfstests/results/generic/313.out.bad)--- tests/generic/313.out 2013-07-08 16:27:41.787710646 -0500 +++ /root/xfstests/results/generic/313.out.bad 2013-07-08 16:47:46.052683735 -0500 @@ -1,3 +1,3 @@ QA output created by 313 -drwxr-sr-x. TEST_DIR/313-dir/subdir +drwxr-sr-x TEST_DIR/313-dir/subdir drwxrwsr-x+ TEST_DIR/313-dir/subdir2 ... (Run 'diff -u tests/generic/313.out /root/xfstests/results/generic/313.out.bad' to see the entire diff)Quoted 5 lines
Looks like there could be a problem with ls? Have you seen that?
Thanks,
BenActually I don't think this is a problem, but the way newer
lsversions are displaying the object permissions (the 'dot' at the end of the permissions, indicating there are no extra attributes).
Quoted 6 lines
I'm going to take a look on what's going on, but I still believe it's just a matter of add the 'dot' to the xfstests correct output.
I had this same problem when testing my patch and needed to fix it locally, but missed to warn you guys, my apologies
Just a matter of information:
Quoted 1 line
From coreutils:
commit b3677e5e383103bf1764b2c8a9329b1c17934b24
Author: Jim Meyering <[email protected]> Date: Wed Apr 2 22:26:45 2008 +0200
ls: use '.' (not +) as SELinux-only alt. access flag in ls -l output
So, this test is selinux dependent, it will provide different outputs whether the system has selinux enabled or not.
Since the test itself creates their own directories, checking if the selinux is enabled or not and checking the proper output depending on selinux activity should avoid false positives on this test. I.e. if the selinux is enabled, the ls -l output will print the 'dot' at the end of the permissions, otherwise, nothing will be printed and Eric's test will pass without problem.
I think this is something worth to mention on xfstests README or some other documentation, mainly because any kind of test like this, but done with the TEST_DEV might be even worst since we don't recreate the filesystem while using TEST_DEV, so, objects there can be created with selinux attrs or not (if created when selinux is disabled) and have the attributes added later.
I'm probably being too paranoid here talking about the TEST_DEV, but, I thought it was worth to mention.
Cheers.
Signature · 6 lines
Carlos _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Quoted 39 lines · Carlos Maiolino
Quoted 21 lines
Quoted 12 lines
generic/313 - output mismatch (see
/root/xfstests/results/generic/313.out.bad)--- tests/generic/313.out 2013-07-08 16:27:41.787710646 -0500 +++ /root/xfstests/results/generic/313.out.bad 2013-07-08 16:47:46.052683735 -0500 @@ -1,3 +1,3 @@ QA output created by 313 -drwxr-sr-x. TEST_DIR/313-dir/subdir +drwxr-sr-x TEST_DIR/313-dir/subdir drwxrwsr-x+ TEST_DIR/313-dir/subdir2 ... (Run 'diff -u tests/generic/313.out /root/xfstests/results/generic/313.out.bad' to see the entire diff)Quoted 5 lines
Looks like there could be a problem with ls? Have you seen that?
Thanks,
BenActually I don't think this is a problem, but the way newer
lsversions are displaying the object permissions (the 'dot' at the end of the permissions, indicating there are no extra attributes).Quoted 6 lines
I'm going to take a look on what's going on, but I still believe it's just a matter of add the 'dot' to the xfstests correct output.
I had this same problem when testing my patch and needed to fix it locally, but missed to warn you guys, my apologies
Just a matter of information:
From coreutils:
commit
b3677e5e383103bf1764b2c8a9329b1c17934b24Author: Jim Meyering <[email protected]> Date: Wed Apr 2 22:26:45 2008 +0200ls: use '.' (not +) as SELinux-only alt. access flag in ls -l output
Quoted 8 lines
So, this test is selinux dependent, it will provide different outputs whether the system has selinux enabled or not.
Since the test itself creates their own directories, checking if the selinux is enabled or not and checking the proper output depending on selinux activity should avoid false positives on this test. I.e. if the selinux is enabled, the
ls -loutput will print the 'dot' at the end of the permissions, otherwise, nothing will be printed and Eric's test will pass without problem.
Hm, I thought we always mounted with a global selinux context, and therefore wouldn't get these differences (i.e. no on-disk selinux attrs should be created)
Quoted 5 lines
I think this is something worth to mention on xfstests README or some other documentation, mainly because any kind of test like this, but done with the
TEST_DEVmight be even worst since we don't recreate the filesystem while usingTEST_DEV, so, objects there can be created with selinux attrs or not (if created when selinux is disabled) and have the attributes added later.
It'd be better to just add a filter if we need it.
But I'd like to know why we need it, I thought the global context made these problems go away...
Guess I'll go look...
-Eric
Quoted 5 lines
I'm probably being too paranoid here talking about the
TEST_DEV, but, I thought it was worth to mention.Cheers.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 1 line · Eric Sandeen
On 7/11/13 1:28 PM, Carlos Maiolino wrote:
...
Quoted 15 lines
Quoted 15 lines
Just a matter of information:
From coreutils:
commit
b3677e5e383103bf1764b2c8a9329b1c17934b24Author: Jim Meyering <[email protected]> Date: Wed Apr 2 22:26:45 2008 +0200ls: use '.' (not +) as SELinux-only alt. access flag in ls -l output
So, this test is selinux dependent, it will provide different outputs whether the system has selinux enabled or not.
Quoted 8 lines
Quoted 5 lines
Since the test itself creates their own directories, checking if the selinux is enabled or not and checking the proper output depending on selinux activity should avoid false positives on this test. I.e. if the selinux is enabled, the
ls -loutput will print the 'dot' at the end of the permissions, otherwise, nothing will be printed and Eric's test will pass without problem.Hm, I thought we always mounted with a global selinux context, and therefore wouldn't get these differences (i.e. no on-disk selinux attrs should be created)
Ok, somehow it really is mounted w/o the context when the test executes. I'm not sure why yet, but fixing that *should* fix the problem, I think.
-Eric
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
PATCH v3 1/1 xfstests: generic/314, test sgid inheritance on subdirs
In reply to Eric SandeenOn XFS this test fails today due to some over-eager SGID removal in xfs core code; ext4 & btrfs pass. Document it in a test, will send xfs patch in a bit.
---
p.s. I'm going to just flaunt my ignorance and say:
I've never understood acls well. I'm hoping someone who does can help me write a better changelog, because this one is no good at all!
V2: add missing source of "attr" file for _require_acls
V3: use _ls_l to filter out the selinux "." - thanks to Carlos!
renumber to 314 to make the merge easier
tests/generic/314 new file +68 -0
@@ -0,0 +1,68 @@ +#! /bin/bash +# FS QA Test No. 314 +# +# Test SGID inheritance on subdirectories +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/attr + +# real QA test starts here +_supported_fs generic +_require_acls +_require_user +_need_to_be_root + +rm -rf $TEST_DIR/$seq-dir + +# Make dir owned by qa user, and an unrelated group: +mkdir $TEST_DIR/$seq-dir +chown $qa_user:12345 $TEST_DIR/$seq-dir + +# Make parent dir sgid +chmod 2775 $TEST_DIR/$seq-dir + +# Make subdirs before & after acl set +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir" +su $qa_user -c "setfacl -m u:$qa_user:rwx,d:u:$qa_user:rwx $TEST_DIR/$seq-dir" +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir2" + +# Both subdirs should have inherited sgid +_ls_l $TEST_DIR/$seq-dir/ | _filter_test_dir | awk '{print $1,$NF}' + +status=0 +exit
tests/generic/314.out new file +3 -0
@@ -0,0 +1,3 @@ +QA output created by 314 +drwxr-sr-x. TEST_DIR/314-dir/subdir +drwxrwsr-x+ TEST_DIR/314-dir/subdir2
tests/generic/group +1 -0
@@ -115,3 +115,4 @@ 310 auto 311 auto metadata log 312 auto quick prealloc enospc +314 auto quick acl
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Re: [PATCH V3] xfstests: generic/314, test sgid inheritance on subdirs
Hi Eric,
the 314.out file is wrong, it should have:
total 4
drwxr-sr-x subdir
drwxrwxr-x+ subdir2
Quoted 120 lines · Eric Sandeen
On XFS this test fails today due to some over-eager SGID removal in xfs core code; ext4 & btrfs pass. Document it in a test, will send xfs patch in a bit.
Signed-off-by Eric Sandeen <[email protected]>---
p.s. I'm going to just flaunt my ignorance and say:
I've never understood acls well. I'm hoping someone who does can help me write a better changelog, because this one is no good at all!V2: add missing source of "attr" file for
_require_aclsV3: use
_ls_lto filter out the selinux "." - thanks to Carlos!
renumber to 314 to make the merge easiertests/generic/314 new file +68
-0@@ -0,0 +1,68 @@ +#! /bin/bash +# FS QA Test No. 314 +# +# Test SGID inheritance on subdirectories +# +#----------------------------------------------------------------------- +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/attr + +# real QA test starts here +_supported_fs generic +_require_acls +_require_user +_need_to_be_root + +rm -rf $TEST_DIR/$seq-dir + +# Make dir owned by qa user, and an unrelated group: +mkdir $TEST_DIR/$seq-dir +chown $qa_user:12345 $TEST_DIR/$seq-dir + +# Make parent dir sgid +chmod 2775 $TEST_DIR/$seq-dir + +# Make subdirs before & after acl set +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir" +su $qa_user -c "setfacl -m u:$qa_user:rwx,d:u:$qa_user:rwx $TEST_DIR/$seq-dir" +su $qa_user -c "mkdir $TEST_DIR/$seq-dir/subdir2" + +# Both subdirs should have inherited sgid +_ls_l $TEST_DIR/$seq-dir/ | _filter_test_dir | awk '{print $1,$NF}' + +status=0 +exittests/generic/314.out new file +3
-0@@ -0,0 +1,3 @@ +QA output created by 314 +drwxr-sr-x. TEST_DIR/314-dir/subdir +drwxrwsr-x+ TEST_DIR/314-dir/subdir2tests/generic/group +1
-0@@ -115,3 +115,4 @@ 310 auto 311 auto metadata log 312 auto quick prealloc enospc +314 auto quick acl_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Signature · 6 lines
Carlos _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs