Skip to contentSkip to conversation

x86, relocs: move ELF relocation handling to C

PATCH Superseded Kees Cook 1 participant 1 message Jun 12, 2013 x86

lore
Share & tools
lore

Kees Cook

author
#0 lore raw

PATCH v2 1/1 x86, relocs: move ELF relocation handling to C

Moves the relocation handling into C, after decompression. This requires that the decompressed size is passed to the decompression routine as well so that relocations can be found. Only kernels that need relocation support will use the code (currently just x86_32), but this is laying the ground work for 64-bit support in support of KASLR.

Based on work by Neill Clift and Michael Davidson.

---
v2:
- clarified commit message.

---
 arch/x86/Kconfig                     |    4 +-
 arch/x86/Makefile                    |    8 ++--
 arch/x86/boot/compressed/head_32.S   |   31 ++------------
 arch/x86/boot/compressed/head_64.S   |    1 +
 arch/x86/boot/compressed/misc.c      |   77 +++++++++++++++++++++++++++++++++-
 arch/x86/include/asm/page_32_types.h |    2 +
 arch/x86/include/asm/page_64_types.h |    5 ---
 arch/x86/include/asm/page_types.h    |    6 +++
 8 files changed, 94 insertions(+), 40 deletions(-)
arch/x86/Kconfig +2 -2
index 685692c..b4797b9 100644
@@ -1695,13 +1695,13 @@ config RELOCATABLE
 	  it has been loaded at and the compile time physical address
 	  (CONFIG_PHYSICAL_START) is ignored.
 
-# Relocation on x86-32 needs some additional build support
+# Relocation on x86 needs some additional build support
 config X86_NEED_RELOCS
 	def_bool y
 	depends on X86_32 && RELOCATABLE
 
 config PHYSICAL_ALIGN
-	hex "Alignment value to which kernel should be aligned" if X86_32
+	hex "Alignment value to which kernel should be aligned"
 	default "0x1000000"
 	range 0x2000 0x1000000
 	---help---
arch/x86/Makefile +4 -4
index 5c47726..43f8cef 100644
@@ -16,6 +16,10 @@ endif
 # e.g.: obj-y += foo_$(BITS).o
 export BITS
 
+ifdef CONFIG_X86_NEED_RELOCS
+        LDFLAGS_vmlinux := --emit-relocs
+endif
+
 ifeq ($(CONFIG_X86_32),y)
         BITS := 32
         UTS_MACHINE := i386
@@ -25,10 +29,6 @@ ifeq ($(CONFIG_X86_32),y)
         KBUILD_AFLAGS += $(biarch)
         KBUILD_CFLAGS += $(biarch)
 
-        ifdef CONFIG_RELOCATABLE
-                LDFLAGS_vmlinux := --emit-relocs
-        endif
-
         KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
 
         # Never want PIC in a 32-bit kernel, prevent breakage with GCC built
arch/x86/boot/compressed/head_32.S +3 -28
index 1e3184f..5d6f689 100644
@@ -181,8 +181,9 @@ relocated:
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	leal	z_extract_offset_negative(%ebx), %ebp
 				/* push arguments for decompress_kernel: */
+	pushl	$z_output_len	/* decompressed length */
+	leal	z_extract_offset_negative(%ebx), %ebp
 	pushl	%ebp		/* output address */
 	pushl	$z_input_len	/* input_len */
 	leal	input_data(%ebx), %eax
@@ -191,33 +192,7 @@ relocated:
 	pushl	%eax		/* heap area */
 	pushl	%esi		/* real mode pointer */
 	call	decompress_kernel
-	addl	$20, %esp
-
-#if CONFIG_RELOCATABLE
-/*
- * Find the address of the relocations.
- */
-	leal	z_output_len(%ebp), %edi
-
-/*
- * Calculate the delta between where vmlinux was compiled to run
- * and where it was actually loaded.
- */
-	movl	%ebp, %ebx
-	subl	$LOAD_PHYSICAL_ADDR, %ebx
-	jz	2f	/* Nothing to be done if loaded at compiled addr. */
-/*
- * Process relocations.
- */
-
-1:	subl	$4, %edi
-	movl	(%edi), %ecx
-	testl	%ecx, %ecx
-	jz	2f
-	addl	%ebx, -__PAGE_OFFSET(%ebx, %ecx)
-	jmp	1b
-2:
-#endif
+	addl	$24, %esp
 
 /*
  * Jump to the decompressed kernel.
arch/x86/boot/compressed/head_64.S +1 -0
index 16f24e6..6632693 100644
@@ -340,6 +340,7 @@ relocated:
 	leaq	input_data(%rip), %rdx  /* input_data */
 	movl	$z_input_len, %ecx	/* input_len */
 	movq	%rbp, %r8		/* output target address */
+	movq	$z_output_len, %r9	/* decompressed length */
 	call	decompress_kernel
 	popq	%rsi
 
arch/x86/boot/compressed/misc.c +76 -1

95 lines not on this page · raw message

arch/x86/include/asm/page_32_types.h +2 -0
index ef17af0..f48b17d 100644
@@ -15,6 +15,8 @@
  */
 #define __PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
 
+#define __START_KERNEL_map	__PAGE_OFFSET
+
 #define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 
arch/x86/include/asm/page_64_types.h +0 -5
index 6c896fb..43dcd80 100644
@@ -32,11 +32,6 @@
  */
 #define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
 
-#define __PHYSICAL_START	((CONFIG_PHYSICAL_START +	 	\
-				  (CONFIG_PHYSICAL_ALIGN - 1)) &	\
-				 ~(CONFIG_PHYSICAL_ALIGN - 1))
-
-#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
 #define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
 
 /* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
arch/x86/include/asm/page_types.h +6 -0
index 54c9787..086c2fa 100644
@@ -33,6 +33,12 @@
 	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
 	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
+#define __PHYSICAL_START	((CONFIG_PHYSICAL_START +		\
+				  (CONFIG_PHYSICAL_ALIGN - 1)) &	\
+				 ~(CONFIG_PHYSICAL_ALIGN - 1))
+
+#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
+
 #ifdef CONFIG_X86_64
 #include <asm/page_64_types.h>
 #else
Signature · 6 lines
1.7.9.5


-- 
Kees Cook
Chrome OS Security