Skip to contentSkip to conversation

ARM: OMAP: Device Tree for 3.11

GIT PULL Benoit Cousson 3 participants 7 messages Jun 19, 2013 – Jun 20, 2013

lore
Share & tools
lore

Benoit Cousson

author
#0 lore raw

Hi Tony,

Please pull the following commits for OMAP Device Tree for v3.11.

It does contains as well 2 clock data patches, I hope it will not generate any conflict with Paul's tree.

Special thanks to Florian for his nice cleanup using the C preprocessor.

Thanks,
Benoit

The following changes since commit 7d132055814ef17a6c7b69f342244c410a5e000f:

Linux 3.10-rc6 (2013-06-15 11:51:07 -1000)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.11/dts

for you to fetch changes up to 153030c22defea2f96546d0f1a74fe954551c4cd:

ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency (2013-06-19 16:59:28 -0500)

----------------------------------------------------------------
Afzal Mohammed (2):
ARM: dts: AM43x: Initial support
ARM: dts: AM43x EPOS EVM support

Dan Murphy (3):
ARM: dts: omap4-panda: Update the LED support for the panda
ARM: dts: omap4-panda: Update the twl6040 gpio to macro definition
ARM: dts: omap5-uevm: Add LED support for uEVM blue LED

Eduardo Valentin (3):
ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices
ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices
ARM: dts: OMAP5: Add bandgap DT entry

Florian Vaussard (15):
ARM: dts: OMAP2+: Use #include for all device trees
ARM: dts: OMAP2+: Use existing constants for GPIOs
ARM: dts: OMAP4/5: Use existing constants for IRQs
ARM: dts: OMAP2+: Header file for pinctrl constants
ARM: dts: OMAP2+: Use pinctrl constants
ARM: dts: AM3XXX: Use #include for all device trees
ARM: dts: AM33XX: Use existing constants for GPIOs
ARM: dts: AM33XX: Specific pinctrl header
ARM: dts: AM33XX: Use pinctrl constants
ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs target
ARM: dts: Protect pinctrl headers against multiple inclusions
ARM: dts: OMAP3: Include IRQ header
ARM: dts: omap3-tobi: Add SMSC911X node
ARM: dts: omap3-tobi: Correct polarity for GPIO LED
ARM: dts: omap3-overo: Add default trigger for TWL4030 LED

J Keerthy (1):
ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes

Javier Martinez Canillas (3):
ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
ARM: dts: omap3-igep0020: Add NAND flash support
ARM: dts: omap3-igep0030: Add NAND flash support

Kevin Hilman (3):
ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeup
ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeup
ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line

Mugunthan V N (3):
ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM

Philip Avinash (4):
ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
ARM: dts: AM33XX: Add PWMSS device tree nodes
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk

Philip, Avinash (1):
ARM: dts: AM33XX: Add ELM node

Roger Quadros (4):
ARM: dts: omap5-uevm: Add USB Host support
ARM: dts: omap4-panda: Add USB Host support
ARM: dts: omap4-panda: Fix DVI EDID reads
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency

Sourav Poddar (1):
ARM: dts: omap5-uevm: Add uart pinctrl data

Sricharan R (1):
ARM: dts: omap5: Make uevm as the official board and deprecate sevm support

Suman Anna (1):
ARM: dts: OMAP4+: Remove multimedia carveouts

Vaibhav Hiremath (7):
ARM: dts: AM33XX: Add default pinctrl binding for I2C device
ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node
ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM
ARM: dts: AM33XX: Add default pinctrl binding for UART0 device
ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
ARM: AM33XX: clock: Add debugSS clock nodes
ARM: AM33XX: clock data: Enable clkout2 as part of init

 .../devicetree/bindings/arm/omap/omap.txt          |    3 +
 arch/arm/boot/dts/Makefile                         |    8 +-
 arch/arm/boot/dts/am335x-bone.dts                  |  118 ++++-
 arch/arm/boot/dts/am335x-evm.dts                   |  264 ++++++++++-
 arch/arm/boot/dts/am335x-evmsk.dts                 |  184 +++++++-
 arch/arm/boot/dts/am33xx.dtsi                      |  121 ++++-
 arch/arm/boot/dts/am3517-evm.dts                   |    2 +-
 arch/arm/boot/dts/am3517_mt_ventoux.dts            |    2 +-
 arch/arm/boot/dts/am4372.dtsi                      |   68 +++
 arch/arm/boot/dts/am43x-epos-evm.dts               |   18 +
 arch/arm/boot/dts/omap2.dtsi                       |    5 +-
 arch/arm/boot/dts/omap2420-h4.dts                  |    2 +-
 arch/arm/boot/dts/omap2420.dtsi                    |    2 +-
 arch/arm/boot/dts/omap2430.dtsi                    |    2 +-
 arch/arm/boot/dts/omap3-beagle-xm.dts              |   48 +-
 arch/arm/boot/dts/omap3-beagle.dts                 |   72 ++-
 arch/arm/boot/dts/omap3-devkit8000.dts             |   11 +-
 arch/arm/boot/dts/omap3-evm.dts                    |    7 +-
 arch/arm/boot/dts/omap3-igep.dtsi                  |   43 +-
 arch/arm/boot/dts/omap3-igep0020.dts               |  111 ++++-
 arch/arm/boot/dts/omap3-igep0030.dts               |   60 ++-
 arch/arm/boot/dts/omap3-overo.dtsi                 |   20 +-
 arch/arm/boot/dts/omap3-tobi.dts                   |   52 ++-
 arch/arm/boot/dts/omap3.dtsi                       |    6 +-
 arch/arm/boot/dts/omap3430-sdp.dts                 |    5 +-
 arch/arm/boot/dts/omap34xx.dtsi                    |    2 +-
 arch/arm/boot/dts/omap36xx.dtsi                    |    2 +-
 arch/arm/boot/dts/omap4-panda-a4.dts               |   10 +-
 arch/arm/boot/dts/omap4-panda-common.dtsi          |  162 +++++--
 arch/arm/boot/dts/omap4-panda-es.dts               |   38 +-
 arch/arm/boot/dts/omap4-panda.dts                  |    4 +-
 arch/arm/boot/dts/omap4-sdp-es23plus.dts           |    8 +-
 arch/arm/boot/dts/omap4-sdp.dts                    |  126 ++---
 arch/arm/boot/dts/omap4-var-som.dts                |    8 +-
 arch/arm/boot/dts/omap4.dtsi                       |  124 +++--
 arch/arm/boot/dts/omap443x.dtsi                    |    8 +-
 arch/arm/boot/dts/omap4460.dtsi                    |   15 +-
 arch/arm/boot/dts/omap5-evm.dts                    |  261 -----------
 arch/arm/boot/dts/omap5-uevm.dts                   |  485 ++++++++++++++++++++
 arch/arm/boot/dts/omap5.dtsi                       |  173 ++++---
 arch/arm/boot/dts/twl4030_omap3.dtsi               |   25 +
 arch/arm/mach-omap2/cclock33xx_data.c              |   49 +-
 include/dt-bindings/pinctrl/am33xx.h               |   42 ++
 include/dt-bindings/pinctrl/omap.h                 |   55 +++
 44 files changed, 2172 insertions(+), 659 deletions(-)
 create mode 100644 arch/arm/boot/dts/am4372.dtsi
 create mode 100644 arch/arm/boot/dts/am43x-epos-evm.dts
 delete mode 100644 arch/arm/boot/dts/omap5-evm.dts
 create mode 100644 arch/arm/boot/dts/omap5-uevm.dts
 create mode 100644 arch/arm/boot/dts/twl4030_omap3.dtsi
 create mode 100644 include/dt-bindings/pinctrl/am33xx.h
 create mode 100644 include/dt-bindings/pinctrl/omap.h
#1 lore raw

Arnd & Olof,

Quoted 7 lines · Benoit Cousson

Hi Tony,

Please pull the following commits for OMAP Device Tree for v3.11.

It does contains as well 2 clock data patches, I hope it will not generate any conflict with Paul's tree.

Special thanks to Florian for his nice cleanup using the C preprocessor.

It's best that Arnd and Olof take this pull request directly as we're getting so close to the merge window. These patches should be pretty much independent of the other branches I've sent, and are needed to keep omap4 booting now that we've flipped the switch for omap4 to be DT only.

Regards,

Tony

Quoted 147 lines

The following changes since commit 7d132055814ef17a6c7b69f342244c410a5e000f:

Linux 3.10-rc6 (2013-06-15 11:51:07 -1000)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.11/dts

for you to fetch changes up to 153030c22defea2f96546d0f1a74fe954551c4cd:

ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency (2013-06-19 16:59:28 -0500)

----------------------------------------------------------------
Afzal Mohammed (2):
ARM: dts: AM43x: Initial support
ARM: dts: AM43x EPOS EVM support

Dan Murphy (3):
ARM: dts: omap4-panda: Update the LED support for the panda
ARM: dts: omap4-panda: Update the twl6040 gpio to macro definition
ARM: dts: omap5-uevm: Add LED support for uEVM blue LED

Eduardo Valentin (3):
ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices
ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices
ARM: dts: OMAP5: Add bandgap DT entry

Florian Vaussard (15):
ARM: dts: OMAP2+: Use #include for all device trees
ARM: dts: OMAP2+: Use existing constants for GPIOs
ARM: dts: OMAP4/5: Use existing constants for IRQs
ARM: dts: OMAP2+: Header file for pinctrl constants
ARM: dts: OMAP2+: Use pinctrl constants
ARM: dts: AM3XXX: Use #include for all device trees
ARM: dts: AM33XX: Use existing constants for GPIOs
ARM: dts: AM33XX: Specific pinctrl header
ARM: dts: AM33XX: Use pinctrl constants
ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs target
ARM: dts: Protect pinctrl headers against multiple inclusions
ARM: dts: OMAP3: Include IRQ header
ARM: dts: omap3-tobi: Add SMSC911X node
ARM: dts: omap3-tobi: Correct polarity for GPIO LED
ARM: dts: omap3-overo: Add default trigger for TWL4030 LED

J Keerthy (1):
ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes

Javier Martinez Canillas (3):
ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
ARM: dts: omap3-igep0020: Add NAND flash support
ARM: dts: omap3-igep0030: Add NAND flash support

Kevin Hilman (3):
ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeup
ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeup
ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line

Mugunthan V N (3):
ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM

Philip Avinash (4):
ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
ARM: dts: AM33XX: Add PWMSS device tree nodes
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk

Philip, Avinash (1):
ARM: dts: AM33XX: Add ELM node

Roger Quadros (4):
ARM: dts: omap5-uevm: Add USB Host support
ARM: dts: omap4-panda: Add USB Host support
ARM: dts: omap4-panda: Fix DVI EDID reads
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency

Sourav Poddar (1):
ARM: dts: omap5-uevm: Add uart pinctrl data

Sricharan R (1):
ARM: dts: omap5: Make uevm as the official board and deprecate sevm support

Suman Anna (1):
ARM: dts: OMAP4+: Remove multimedia carveouts

Vaibhav Hiremath (7):
ARM: dts: AM33XX: Add default pinctrl binding for I2C device
ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node
ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM
ARM: dts: AM33XX: Add default pinctrl binding for UART0 device
ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
ARM: AM33XX: clock: Add debugSS clock nodes
ARM: AM33XX: clock data: Enable clkout2 as part of init

 .../devicetree/bindings/arm/omap/omap.txt          |    3 +
 arch/arm/boot/dts/Makefile                         |    8 +-
 arch/arm/boot/dts/am335x-bone.dts                  |  118 ++++-
 arch/arm/boot/dts/am335x-evm.dts                   |  264 ++++++++++-
 arch/arm/boot/dts/am335x-evmsk.dts                 |  184 +++++++-
 arch/arm/boot/dts/am33xx.dtsi                      |  121 ++++-
 arch/arm/boot/dts/am3517-evm.dts                   |    2 +-
 arch/arm/boot/dts/am3517_mt_ventoux.dts            |    2 +-
 arch/arm/boot/dts/am4372.dtsi                      |   68 +++
 arch/arm/boot/dts/am43x-epos-evm.dts               |   18 +
 arch/arm/boot/dts/omap2.dtsi                       |    5 +-
 arch/arm/boot/dts/omap2420-h4.dts                  |    2 +-
 arch/arm/boot/dts/omap2420.dtsi                    |    2 +-
 arch/arm/boot/dts/omap2430.dtsi                    |    2 +-
 arch/arm/boot/dts/omap3-beagle-xm.dts              |   48 +-
 arch/arm/boot/dts/omap3-beagle.dts                 |   72 ++-
 arch/arm/boot/dts/omap3-devkit8000.dts             |   11 +-
 arch/arm/boot/dts/omap3-evm.dts                    |    7 +-
 arch/arm/boot/dts/omap3-igep.dtsi                  |   43 +-
 arch/arm/boot/dts/omap3-igep0020.dts               |  111 ++++-
 arch/arm/boot/dts/omap3-igep0030.dts               |   60 ++-
 arch/arm/boot/dts/omap3-overo.dtsi                 |   20 +-
 arch/arm/boot/dts/omap3-tobi.dts                   |   52 ++-
 arch/arm/boot/dts/omap3.dtsi                       |    6 +-
 arch/arm/boot/dts/omap3430-sdp.dts                 |    5 +-
 arch/arm/boot/dts/omap34xx.dtsi                    |    2 +-
 arch/arm/boot/dts/omap36xx.dtsi                    |    2 +-
 arch/arm/boot/dts/omap4-panda-a4.dts               |   10 +-
 arch/arm/boot/dts/omap4-panda-common.dtsi          |  162 +++++--
 arch/arm/boot/dts/omap4-panda-es.dts               |   38 +-
 arch/arm/boot/dts/omap4-panda.dts                  |    4 +-
 arch/arm/boot/dts/omap4-sdp-es23plus.dts           |    8 +-
 arch/arm/boot/dts/omap4-sdp.dts                    |  126 ++---
 arch/arm/boot/dts/omap4-var-som.dts                |    8 +-
 arch/arm/boot/dts/omap4.dtsi                       |  124 +++--
 arch/arm/boot/dts/omap443x.dtsi                    |    8 +-
 arch/arm/boot/dts/omap4460.dtsi                    |   15 +-
 arch/arm/boot/dts/omap5-evm.dts                    |  261 -----------
 arch/arm/boot/dts/omap5-uevm.dts                   |  485 ++++++++++++++++++++
 arch/arm/boot/dts/omap5.dtsi                       |  173 ++++---
 arch/arm/boot/dts/twl4030_omap3.dtsi               |   25 +
 arch/arm/mach-omap2/cclock33xx_data.c              |   49 +-
 include/dt-bindings/pinctrl/am33xx.h               |   42 ++
 include/dt-bindings/pinctrl/omap.h                 |   55 +++
 44 files changed, 2172 insertions(+), 659 deletions(-)
 create mode 100644 arch/arm/boot/dts/am4372.dtsi
 create mode 100644 arch/arm/boot/dts/am43x-epos-evm.dts
 delete mode 100644 arch/arm/boot/dts/omap5-evm.dts
 create mode 100644 arch/arm/boot/dts/omap5-uevm.dts
 create mode 100644 arch/arm/boot/dts/twl4030_omap3.dtsi
 create mode 100644 include/dt-bindings/pinctrl/am33xx.h
 create mode 100644 include/dt-bindings/pinctrl/omap.h
#2 lore raw
Quoted 7 lines · Tony Lindgren
Quoted 6 lines · Benoit Cousson

Hi Tony,

Please pull the following commits for OMAP Device Tree for v3.11.

It does contains as well 2 clock data patches, I hope it will not generate any conflict with Paul's tree.

Quoted 7 lines
Quoted 1 line

Special thanks to Florian for his nice cleanup using the C preprocessor.

It's best that Arnd and Olof take this pull request directly as we're getting so close to the merge window. These patches should be pretty much independent of the other branches I've sent, and are needed to keep omap4 booting now that we've flipped the switch for omap4 to be DT only.

Ok, I've put it in my queue. About 60 pull requests to take care of at the moment, so it might take a few days.

Arnd

#3 lore raw
In reply to Tony Lindgren
Quoted 7 lines · Tony Lindgren
Quoted 6 lines · Benoit Cousson

Hi Tony,

Please pull the following commits for OMAP Device Tree for v3.11.

It does contains as well 2 clock data patches, I hope it will not generate any conflict with Paul's tree.

Quoted 8 lines
Quoted 1 line

Special thanks to Florian for his nice cleanup using the C preprocessor.

It's best that Arnd and Olof take this pull request directly as we're getting so close to the merge window. These patches should be pretty much independent of the other branches I've sent, and are needed to keep omap4 booting now that we've flipped the switch for omap4 to be DT only.

Would someone provide a merge description for this? I just noticed that it's not a signed tag, and there are lots of patches in it, so I'd rather not have to come up with something myself.

Arnd

author
#4 lore raw
Quoted 17 lines · Arnd Bergmann
Quoted 7 lines · Tony Lindgren
Quoted 6 lines · Benoit Cousson

Hi Tony,

Please pull the following commits for OMAP Device Tree for v3.11.

It does contains as well 2 clock data patches, I hope it will not generate any conflict with Paul's tree.

Quoted 8 lines
Quoted 1 line

Special thanks to Florian for his nice cleanup using the C preprocessor.

It's best that Arnd and Olof take this pull request directly as we're getting so close to the merge window. These patches should be pretty much independent of the other branches I've sent, and are needed to keep omap4 booting now that we've flipped the switch for omap4 to be DT only.

Quoted 3 lines

Would someone provide a merge description for this? I just noticed that it's not a signed tag, and there are lots of patches in it, so I'd rather not have to come up with something myself.

What about "omap devicetree changes for v3.11 merge window"
----------------------------------------------------------------
Add mandatory DT support for missing IPs, like USB host, bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices. Introduce new AM43x silicon.
----------------------------------------------------------------

Regards,
Benoit

Arnd

Quoted 5 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

#5 lore raw
Quoted 7 lines · Benoit

What about "omap devicetree changes for v3.11 merge window"
----------------------------------------------------------------
Add mandatory DT support for missing IPs, like USB host, bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices. Introduce new AM43x silicon.
----------------------------------------------------------------

Thanks, pulled into next/dt now with Tony's Ack.

Arnd

author
#6 lore raw
In reply to Tony Lindgren

Hi Tony,

Quoted 9 lines · Tony Lindgren

Arnd & Olof,

Quoted 6 lines · Benoit Cousson

Hi Tony,

Please pull the following commits for OMAP Device Tree for v3.11.

It does contains as well 2 clock data patches, I hope it will not generate any conflict with Paul's tree.

Quoted 7 lines
Quoted 1 line

Special thanks to Florian for his nice cleanup using the C preprocessor.

It's best that Arnd and Olof take this pull request directly as we're getting so close to the merge window. These patches should be pretty much independent of the other branches I've sent, and are needed to keep omap4 booting now that we've flipped the switch for omap4 to be DT only.

Thanks and sorry for that. I was not expecting all these last minutes series :-(

I'll stop accepting at -rc5 next time.

Regards,
Benoit

Quoted 147 lines
Quoted 147 lines

The following changes since commit 7d132055814ef17a6c7b69f342244c410a5e000f:

   Linux 3.10-rc6 (2013-06-15 11:51:07 -1000)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.11/dts

for you to fetch changes up to 153030c22defea2f96546d0f1a74fe954551c4cd:

ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency (2013-06-19 16:59:28 -0500)

----------------------------------------------------------------
Afzal Mohammed (2):
ARM: dts: AM43x: Initial support
ARM: dts: AM43x EPOS EVM support

Dan Murphy (3):
ARM: dts: omap4-panda: Update the LED support for the panda
ARM: dts: omap4-panda: Update the twl6040 gpio to macro definition
ARM: dts: omap5-uevm: Add LED support for uEVM blue LED

Eduardo Valentin (3):
ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices
ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices
ARM: dts: OMAP5: Add bandgap DT entry

Florian Vaussard (15):
ARM: dts: OMAP2+: Use #include for all device trees
ARM: dts: OMAP2+: Use existing constants for GPIOs
ARM: dts: OMAP4/5: Use existing constants for IRQs
ARM: dts: OMAP2+: Header file for pinctrl constants
ARM: dts: OMAP2+: Use pinctrl constants
ARM: dts: AM3XXX: Use #include for all device trees
ARM: dts: AM33XX: Use existing constants for GPIOs
ARM: dts: AM33XX: Specific pinctrl header
ARM: dts: AM33XX: Use pinctrl constants
ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs target
ARM: dts: Protect pinctrl headers against multiple inclusions
ARM: dts: OMAP3: Include IRQ header
ARM: dts: omap3-tobi: Add SMSC911X node
ARM: dts: omap3-tobi: Correct polarity for GPIO LED
ARM: dts: omap3-overo: Add default trigger for TWL4030 LED

J Keerthy (1):
ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes

Javier Martinez Canillas (3):
ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
ARM: dts: omap3-igep0020: Add NAND flash support
ARM: dts: omap3-igep0030: Add NAND flash support

Kevin Hilman (3):
ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeup
ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeup
ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line

Mugunthan V N (3):
ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM

Philip Avinash (4):
ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
ARM: dts: AM33XX: Add PWMSS device tree nodes
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk

Philip, Avinash (1):
ARM: dts: AM33XX: Add ELM node

Roger Quadros (4):
ARM: dts: omap5-uevm: Add USB Host support
ARM: dts: omap4-panda: Add USB Host support
ARM: dts: omap4-panda: Fix DVI EDID reads
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency

Sourav Poddar (1):
ARM: dts: omap5-uevm: Add uart pinctrl data

Sricharan R (1):
ARM: dts: omap5: Make uevm as the official board and deprecate sevm support

Suman Anna (1):
ARM: dts: OMAP4+: Remove multimedia carveouts

Vaibhav Hiremath (7):
ARM: dts: AM33XX: Add default pinctrl binding for I2C device
ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node
ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM
ARM: dts: AM33XX: Add default pinctrl binding for UART0 device
ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
ARM: AM33XX: clock: Add debugSS clock nodes
ARM: AM33XX: clock data: Enable clkout2 as part of init

  .../devicetree/bindings/arm/omap/omap.txt          |    3 +
  arch/arm/boot/dts/Makefile                         |    8 +-
  arch/arm/boot/dts/am335x-bone.dts                  |  118 ++++-
  arch/arm/boot/dts/am335x-evm.dts                   |  264 ++++++++++-
  arch/arm/boot/dts/am335x-evmsk.dts                 |  184 +++++++-
  arch/arm/boot/dts/am33xx.dtsi                      |  121 ++++-
  arch/arm/boot/dts/am3517-evm.dts                   |    2 +-
  arch/arm/boot/dts/am3517_mt_ventoux.dts            |    2 +-
  arch/arm/boot/dts/am4372.dtsi                      |   68 +++
  arch/arm/boot/dts/am43x-epos-evm.dts               |   18 +
  arch/arm/boot/dts/omap2.dtsi                       |    5 +-
  arch/arm/boot/dts/omap2420-h4.dts                  |    2 +-
  arch/arm/boot/dts/omap2420.dtsi                    |    2 +-
  arch/arm/boot/dts/omap2430.dtsi                    |    2 +-
  arch/arm/boot/dts/omap3-beagle-xm.dts              |   48 +-
  arch/arm/boot/dts/omap3-beagle.dts                 |   72 ++-
  arch/arm/boot/dts/omap3-devkit8000.dts             |   11 +-
  arch/arm/boot/dts/omap3-evm.dts                    |    7 +-
  arch/arm/boot/dts/omap3-igep.dtsi                  |   43 +-
  arch/arm/boot/dts/omap3-igep0020.dts               |  111 ++++-
  arch/arm/boot/dts/omap3-igep0030.dts               |   60 ++-
  arch/arm/boot/dts/omap3-overo.dtsi                 |   20 +-
  arch/arm/boot/dts/omap3-tobi.dts                   |   52 ++-
  arch/arm/boot/dts/omap3.dtsi                       |    6 +-
  arch/arm/boot/dts/omap3430-sdp.dts                 |    5 +-
  arch/arm/boot/dts/omap34xx.dtsi                    |    2 +-
  arch/arm/boot/dts/omap36xx.dtsi                    |    2 +-
  arch/arm/boot/dts/omap4-panda-a4.dts               |   10 +-
  arch/arm/boot/dts/omap4-panda-common.dtsi          |  162 +++++--
  arch/arm/boot/dts/omap4-panda-es.dts               |   38 +-
  arch/arm/boot/dts/omap4-panda.dts                  |    4 +-
  arch/arm/boot/dts/omap4-sdp-es23plus.dts           |    8 +-
  arch/arm/boot/dts/omap4-sdp.dts                    |  126 ++---
  arch/arm/boot/dts/omap4-var-som.dts                |    8 +-
  arch/arm/boot/dts/omap4.dtsi                       |  124 +++--
  arch/arm/boot/dts/omap443x.dtsi                    |    8 +-
  arch/arm/boot/dts/omap4460.dtsi                    |   15 +-
  arch/arm/boot/dts/omap5-evm.dts                    |  261 -----------
  arch/arm/boot/dts/omap5-uevm.dts                   |  485 ++++++++++++++++++++
  arch/arm/boot/dts/omap5.dtsi                       |  173 ++++---
  arch/arm/boot/dts/twl4030_omap3.dtsi               |   25 +
  arch/arm/mach-omap2/cclock33xx_data.c              |   49 +-
  include/dt-bindings/pinctrl/am33xx.h               |   42 ++
  include/dt-bindings/pinctrl/omap.h                 |   55 +++
  44 files changed, 2172 insertions(+), 659 deletions(-)

create mode 100644 arch/arm/boot/dts/am4372.dtsi create mode 100644 arch/arm/boot/dts/am43x-epos-evm.dts delete mode 100644 arch/arm/boot/dts/omap5-evm.dts create mode 100644 arch/arm/boot/dts/omap5-uevm.dts create mode 100644 arch/arm/boot/dts/twl4030_omap3.dtsi create mode 100644 include/dt-bindings/pinctrl/am33xx.h create mode 100644 include/dt-bindings/pinctrl/omap.h