vf610twr: Add default environment in line with other Freescale boards
PATCH 1/2 vf610twr: Add default environment in line with other Freescale boards
Signed-off-by Otavio Salvador <[email protected]>
--- include/configs/vf610twr.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)
include/configs/vf610twr.h +58 -0
@@ -85,6 +85,64 @@#define CONFIG_SYS_TEXT_BASE 0x3f008000 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttymxc0\0" \ + "initrd_high=0xffffffff\0" \ + "ip_dyn=yes\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ + "update_sd_firmware_filename=u-boot.imx\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "bootm\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" +/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
Signature · 1 line
1.8.3.1
PATCH 2/2 vf610twr: Remove SoC name from U-Boot prompt
We've been dropping SoC name from U-Boot prompt as it increase complexity for automatic testing and makes line longer for no good reason.
Signed-off-by Otavio Salvador <[email protected]>
--- include/configs/vf610twr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/vf610twr.h +1 -1
@@ -147,7 +147,7 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "Vybrid U-Boot > " +#define CONFIG_SYS_PROMPT "=> "#undef CONFIG_AUTO_COMPLETE#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \
Signature · 1 line
1.8.3.1
PATCH 2/2 vf610twr: Remove SoC name from U-Boot prompt
I'm going to boot test these patches on the tower. I'll follow-up after I verify with a new environment & build.
Quoted 29 lines · Otavio Salvador
We've been dropping SoC name from U-Boot prompt as it increase complexity for automatic testing and makes line longer for no good reason.
Signed-off-by Otavio Salvador <[email protected]>--- include/configs/vf610twr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/configs/vf610twr.h +1
-1@@ -147,7 +147,7 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "Vybrid U-Boot > " +#define CONFIG_SYS_PROMPT "=> "#undef CONFIG_AUTO_COMPLETE#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \Signature · 6 lines
1.8.3.1 _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
Andy Voltz Timesys Corporation
PATCH 1/2 vf610twr: Add default environment in line with other Freescale boards
In reply to Otavio SalvadorQuoted 10 lines · Otavio Salvador
Signed-off-by Otavio Salvador <[email protected]>--- include/configs/vf610twr.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)include/configs/vf610twr.h +0
-0
include/configs/vf610twr.h line 91
Quoted 7 lines
include/configs/vf610twr.h +4
-0@@ -85,6 +85,64 @@#define CONFIG_SYS_TEXT_BASE 0x3f008000 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttymxc0\0" \
Vybrid does not use ttymxc0.
PATCH 1/2 vf610twr: Add default environment in line with other Freescale boards
Quoted 13 lines · Fabio Estevam
Quoted 11 lines · Otavio Salvador
Signed-off-by Otavio Salvador <[email protected]>--- include/configs/vf610twr.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)include/configs/vf610twr.h +0
-0@@ -85,6 +85,64 @@
Quoted 8 lines
include/configs/vf610twr.h line 91
Quoted 6 lines
include/configs/vf610twr.h +4
-0#define CONFIG_SYS_TEXT_BASE 0x3f008000 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttymxc0\0" \Vybrid does not use ttymxc0.
Andy can you confirm which one we should use here?
It should be /dev/ttymxc1 right?
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750