ARM: Make multi_v7_defconfig usable on hardware
PATCH 1/1 ARM: Make multi_v7_defconfig usable on hardware
This updates multi_v7_defconfig to boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes.
Beyond base platforms, things like PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing.
--- arch/arm/configs/multi_v7_defconfig | 125 ++++++++++++++++++++++++++++-------- 1 file changed, 97 insertions(+), 28 deletions(-)
arch/arm/configs/multi_v7_defconfig +97 -28
@@ -1,88 +1,157 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y -CONFIG_ARCH_SIRF=y CONFIG_MACH_ARMADA_XP=y +CONFIG_ARCH_BCM=y +CONFIG_GPIO_PCA953X=y CONFIG_ARCH_HIGHBANK=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_ARCH_MXC=y +CONFIG_MACH_IMX51_DT=y +CONFIG_SOC_IMX53=y +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +CONFIG_SOC_VF610=y +CONFIG_ARCH_OMAP2PLUS=y +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM43XX=y +CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SOCFPGA=y -CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_WM8850=y -# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set -CONFIG_ARCH_ZYNQ=y -CONFIG_ARM_ERRATA_754322=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR13XX=y CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y +CONFIG_ARCH_STI=y +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_SIRF=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_TEGRA_2x_SOC=y +CONFIG_ARCH_TEGRA_3x_SOC=y +CONFIG_ARCH_TEGRA_114_SOC=y +CONFIG_TEGRA_PCI=y +CONFIG_TEGRA_EMC_SCALING_ENABLE=y +CONFIG_ARCH_U8500=y +CONFIG_MACH_SNOWBALL=y +CONFIG_MACH_UX500_DT=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VEXPRESS_CA9X4=y +CONFIG_ARCH_VIRT=y +CONFIG_ARCH_WM8850=y +CONFIG_ARCH_ZYNQ=y CONFIG_SMP=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_AEABI=y -CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_ARM_APPENDED_DTB=y -CONFIG_VFP=y -CONFIG_NEON=y CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y -CONFIG_SATA_AHCI_PLATFORM=y CONFIG_NETDEVICES=y -CONFIG_SUN4I_EMAC=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y +CONFIG_KEYBOARD_SPEAR=y CONFIG_SERIO_AMBAKMI=y -CONFIG_MDIO_SUN4I=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y -CONFIG_KEYBOARD_SPEAR=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_SIRFSOC=y CONFIG_SERIAL_SIRFSOC_CONSOLE=y +CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_VT8500=y CONFIG_SERIAL_VT8500_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y -CONFIG_IPMI_HANDLER=y -CONFIG_IPMI_SI=y -CONFIG_I2C=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_SIRF=y +CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_SPI_SIRF=y -CONFIG_GPIO_PL061=y -CONFIG_FB=y +CONFIG_SPI_TEGRA114=y +CONFIG_SPI_TEGRA20_SLINK=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_TWL4030=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_TPS51632=y +CONFIG_REGULATOR_TPS62360=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_VEXPRESS=y +CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y +CONFIG_DRM_TEGRA=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y -CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FB_SIMPLE=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_ISP1760_HCD=y CONFIG_USB_STORAGE=y +CONFIG_AB8500_USB=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_OMAP_USB2=y +CONFIG_OMAP_USB3=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_USB_GPIO_VBUS=y +CONFIG_USB_ISP1301=y +CONFIG_USB_MXS_PHY=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y -CONFIG_MMC_WMT=y +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y CONFIG_EDAC_HIGHBANK_L2=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y -CONFIG_PWM=y -CONFIG_PWM_VT8500=y +CONFIG_RTC_DRV_TEGRA=y CONFIG_DMADEVICES=y -CONFIG_PL330_DMA=y -CONFIG_SIRF_DMA=y CONFIG_DW_DMAC=y +CONFIG_TEGRA20_APB_DMA=y +CONFIG_STE_DMA40=y +CONFIG_SIRF_DMA=y +CONFIG_TI_EDMA=y +CONFIG_PL330_DMA=y +CONFIG_IMX_SDMA=y +CONFIG_IMX_DMA=y +CONFIG_MXS_DMA=y +CONFIG_DMA_OMAP=y +CONFIG_PWM=y +CONFIG_PWM_VT8500=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_OMAP2PLUS_UART=y +CONFIG_DEBUG_OMAP4UART3=y +CONFIG_EARLY_PRINTK=y
Signature · 1 line
1.8.1.192.gc4361b8
PATCH 1/1 ARM: Make multi_v7_defconfig usable on hardware
arch/arm/configs/multi_v7_defconfig line 156
Quoted 3 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig +3
-0+CONFIG_DEBUG_LL=y +CONFIG_DEBUG_OMAP2PLUS_UART=y +CONFIG_DEBUG_OMAP4UART3=y
Clearly not supposed to be there for the posted version, my bad -- will take those out before committing.
(this will go on top of next/late, btw).
-Olof
PATCH 1/1 ARM: Make multi_v7_defconfig usable on hardware
Quoted 11 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig line 156
Quoted 3 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig +3
-0+CONFIG_DEBUG_LL=y +CONFIG_DEBUG_OMAP2PLUS_UART=y +CONFIG_DEBUG_OMAP4UART3=yClearly not supposed to be there for the posted version, my bad -- will take those out before committing.
(this will go on top of next/late, btw).
Looks good to me without the DEBUG_LL stuff:
PATCH 1/1 ARM: Make multi_v7_defconfig usable on hardware
In reply to Olof JohanssonQuoted 10 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig line 156
Quoted 3 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig +3
-0+CONFIG_DEBUG_LL=y +CONFIG_DEBUG_OMAP2PLUS_UART=y +CONFIG_DEBUG_OMAP4UART3=yClearly not supposed to be there for the posted version, my bad -- will take those out before committing.
(this will go on top of next/late, btw).
Actually, this doesn't go nicely on top of any branch right now since multi_v7_defconfig is modified in several of the branches.
So, I've applied this on top of for-next (which is unorthodox and unusual), and we'll move it over to what will likely be the first, pre-rc1 fixes pull request that we send up, once all the other contents has been merged.
-Olof
PATCH 1/1 ARM: Make multi_v7_defconfig usable on hardware
Quoted 10 lines · Olof Johansson
Quoted 9 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig line 156
Quoted 3 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig +3
-0+CONFIG_DEBUG_LL=y +CONFIG_DEBUG_OMAP2PLUS_UART=y +CONFIG_DEBUG_OMAP4UART3=yClearly not supposed to be there for the posted version, my bad -- will take those out before committing.
Quoted 8 lines
Quoted 1 line
(this will go on top of next/late, btw).
Actually, this doesn't go nicely on top of any branch right now since
multi_v7_defconfigis modified in several of the branches.So, I've applied this on top of for-next (which is unorthodox and unusual), and we'll move it over to what will likely be the first, pre-rc1 fixes pull request that we send up, once all the other contents has been merged.
Hopefully this can be carefully rebuilt on top of -rc1 with inspection for any deletions. For example, I just noticed that this undoes some of the additions to multi_v7_defconfig which add the network support for Allwinner/sun4, and so broke network-enabled kernels for my cubieboard.
[1]
commit fb1c60288a886a28dc7c055449fd1936140fe891
Author: Maxime Ripard <[email protected]> Date: Sun Jun 9 18:13:53 2013 +0200
ARM: multi_v7: Enable Allwinner EMAC in multi_v7_defconfig
PATCH 1/1 ARM: Make multi_v7_defconfig usable on hardware
Quoted 26 lines · Kevin Hilman
Quoted 10 lines · Olof Johansson
Quoted 9 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig line 156
Quoted 3 lines · Olof Johansson
arch/arm/configs/multi_v7_defconfig +3
-0+CONFIG_DEBUG_LL=y +CONFIG_DEBUG_OMAP2PLUS_UART=y +CONFIG_DEBUG_OMAP4UART3=yClearly not supposed to be there for the posted version, my bad -- will take those out before committing.
Quoted 8 lines
Quoted 1 line
(this will go on top of next/late, btw).
Actually, this doesn't go nicely on top of any branch right now since
multi_v7_defconfigis modified in several of the branches.So, I've applied this on top of for-next (which is unorthodox and unusual), and we'll move it over to what will likely be the first, pre-rc1 fixes pull request that we send up, once all the other contents has been merged.
Hopefully this can be carefully rebuilt on top of -rc1 with inspection for any deletions. For example, I just noticed that this undoes some of the additions to
multi_v7_defconfigwhich add the network support for Allwinner/sun4, and so broke network-enabled kernels for my cubieboard.
Quoted 8 lines
[1]
commitfb1c60288a886a28dc7c055449fd1936140fe891Author: Maxime Ripard <[email protected]> Date: Sun Jun 9 18:13:53 2013 +0200ARM:
multi_v7: Enable Allwinner EMAC inmulti_v7_defconfigSigned-off-by Maxime Ripard <[email protected]>
Grmbl. Yeah, because the driver wasn't in the tree by the time the defconfig was generated. So technically it wasn't in arm-soc by the time we picked up the patch either.
Let's sort this out early next week when we're in Dublin. By then davem's main pull request might be in-tree and that'll make it easier.
-Olof
PATCH 1/1 ARM: Make multi_v7_defconfig usable on hardware
In reply to Olof JohanssonQuoted 8 lines · Olof Johansson
This updates
multi_v7_defconfigto boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes.Beyond base platforms, things like
PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing.
This looks like a good first step for Tegra,so,
There are quite a few drivers enabled in tegra_defconfig that aren't in this file. They're probably not required for basic boot testing (I think e.g. all the PMICs were there), but would be for full functionality. Should we port all those in too sometime?
PATCH 1/1 ARM: Make multi_v7_defconfig usable on hardware
Quoted 10 lines · Stephen Warren
Quoted 8 lines · Olof Johansson
This updates
multi_v7_defconfigto boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes.Beyond base platforms, things like
PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing.
Quoted 8 lines
This looks like a good first step for Tegra,so,
Acked-by Stephen Warren <[email protected]>There are quite a few drivers enabled in
tegra_defconfigthat aren't in this file. They're probably not required for basic boot testing (I think e.g. all the PMICs were there), but would be for full functionality. Should we port all those in too sometime?
Yep, ideally multi_v7_defconfig should be as complete as it gets, and I would actually like to see platforms move over to using that instead of their slimmed down for a lot of stuff.
-Olof
PATCH 1/1 ARM: Make multi_v7_defconfig usable on hardware
Quoted 21 lines · Olof Johansson
Quoted 10 lines · Stephen Warren
Quoted 8 lines · Olof Johansson
This updates
multi_v7_defconfigto boot on at least Tegra2 Seaboard and Panda ES. I lack working hardware for most of the platforms that were enabled to compare with, so I could only verify those two for now. Still, I enabled all of the available ones for build coverage purposes.Beyond base platforms, things like
PRINTK_TIME, filesystems, MMC, USB, INET and UNIX networking was enabled. I'm sure we'll keep adding more over time, but this gets us off the ground for semi-regular boot testing.Quoted 8 lines
This looks like a good first step for Tegra,so,
Acked-by Stephen Warren <[email protected]>There are quite a few drivers enabled in
tegra_defconfigthat aren't in this file. They're probably not required for basic boot testing (I think e.g. all the PMICs were there), but would be for full functionality. Should we port all those in too sometime?
Quoted 3 lines
Yep, ideally
multi_v7_defconfigshould be as complete as it gets, and I would actually like to see platforms move over to using that instead of their slimmed down for a lot of stuff.
We should make it all modular too so distros can use it as a base. Otherwise we'll fast run into all kinds of issues with the image size.
Regards,
Tony