Prepare for TI816X : reuse existing code from TI814X

PATCH Superseded TENART Antoine 2 participants 6 messages Jun 28, 2013 – Jul 2, 2013 2 messages not in the archive

Subsystems (2)

Arm (32-bit) Kbuild

lore

Share & tools

lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

TENART Antoine

author

2013-06-28 15:18 UTC #1 lore raw

PATCH v5 1/3 Prepare for TI816X : reuse existing code from TI814X

Rename some CONFIG_TI814X to a more generic CONFIG_81XX

Signed-off-by Antoine Tenart <[email protected]>

---
 Makefile                                |    2 +-
 arch/arm/cpu/armv7/Makefile             |    2 +-
 arch/arm/cpu/armv7/omap-common/Makefile |    2 +-
 arch/arm/include/asm/arch-am33xx/cpu.h  |    2 +-
 arch/arm/include/asm/arch-am33xx/omap.h |    2 +-
 drivers/serial/ns16550.c                |    4 ++--
 spl/Makefile                            |    2 +-
 7 files changed, 8 insertions(+), 8 deletions(-)

Makefile +1 -1

index fdaddb9..2224393 100644
@@ -337,7 +337,7 @@ LIBS-y += api/libapi.o
 LIBS-y += post/libpost.o
 LIBS-y += test/libtest.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI81XX),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif

arch/arm/cpu/armv7/Makefile +1 -1

index 7a8c2d0..415ace8 100644
@@ -32,7 +32,7 @@ COBJS	+= cache_v7.o
 COBJS	+= cpu.o
 COBJS	+= syslib.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX),)
 SOBJS	+= lowlevel_init.o
 endif

arch/arm/cpu/armv7/omap-common/Makefile +1 -1

index c4b9809..20586d3 100644
@@ -37,7 +37,7 @@ COBJS	+= vc.o
 COBJS	+= abb.o
 endif
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI81XX),)
 COBJS	+= boot-common.o
 SOBJS	+= lowlevel_init.o
 endif

arch/arm/include/asm/arch-am33xx/cpu.h +1 -1

index 3d3a7c8..13c0667 100644
@@ -54,7 +54,7 @@
 /* Reset control */
 #ifdef CONFIG_AM33XX
 #define PRM_RSTCTRL			(PRCM_BASE + 0x0F00)
-#elif defined(CONFIG_TI814X)
+#elif defined(CONFIG_TI81XX)
 #define PRM_RSTCTRL			(PRCM_BASE + 0x00A0)
 #endif
 #define PRM_RSTST			(PRM_RSTCTRL + 8)

arch/arm/include/asm/arch-am33xx/omap.h +1 -1

index e7576c1..777a456 100644
@@ -32,7 +32,7 @@
 #define NON_SECURE_SRAM_START	0x402F0400
 #define NON_SECURE_SRAM_END	0x40310000
 #define SRAM_SCRATCH_SPACE_ADDR	0x4030C000
-#elif defined(CONFIG_TI814X)
+#elif defined(CONFIG_TI81XX)
 #define NON_SECURE_SRAM_START	0x40300000
 #define NON_SECURE_SRAM_END	0x40320000
 #define SRAM_SCRATCH_SPACE_ADDR	0x4031B800

drivers/serial/ns16550.c +2 -2

index d77c25f..d659eb0 100644
@@ -57,7 +57,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 
 	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
 #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
-			defined(CONFIG_AM33XX) || defined(CONFIG_TI814X)
+			defined(CONFIG_AM33XX) || defined(CONFIG_TI81XX)
 	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
 #endif
 	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);

@@ -72,7 +72,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 	serial_out(UART_LCRVAL, &com_port->lcr);
 #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
 	defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
-	defined(CONFIG_TI814X)
+	defined(CONFIG_TI81XX)
 
 	/* /16 is proper to hit 115200 with 48MHz */
 	serial_out(0, &com_port->mdr1);

spl/Makefile +1 -1

index 01873de..6a91239 100644
@@ -84,7 +84,7 @@ LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
 LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o
 LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI81XX),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif

Signature · 1 line

1.7.10.4

Wolfgang Denk

2013-06-28 18:34 UTC #2 lore raw

PATCH v5 1/3 Prepare for TI816X : reuse existing code from TI814X

Dear "TENART Antoine",

Quoted 12 lines · In message <[email protected]> you…

Rename some CONFIG_TI814X to a more generic CONFIG_81XX

Signed-off-by Antoine Tenart <[email protected]>

---
 Makefile                                |    2 +-
 arch/arm/cpu/armv7/Makefile             |    2 +-
 arch/arm/cpu/armv7/omap-common/Makefile |    2 +-
 arch/arm/include/asm/arch-am33xx/cpu.h  |    2 +-
 arch/arm/include/asm/arch-am33xx/omap.h |    2 +-
 drivers/serial/ns16550.c                |    4 ++--
 spl/Makefile                            |    2 +-
 7 files changed, 8 insertions(+), 8 deletions(-)

Hmmm... should not any boards that used to set CONFIG_TI814X in their board config files (ti814x_evm) now also set CONFIG_TI81XX ?

As is, with this patch applied, these boards will probably not build any more, or at least not work any more.

Please also fix the typo in the commit message:
s/CONFIG_81XX/CONFIG_TI81XX/

Best regards,

Wolfgang Denk

Signature · 6 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The only way you could make a happy  marriage  is  by  cuttin'  their
heads  off  as  soon  as  they say `I do', yes? You can't make happi-
ness...                           - Terry Pratchett, _Witches Abroad_

TENART Antoine

author

2013-07-02 09:03 UTC #3 lore raw

PATCH v5 1/3 Prepare for TI816X : reuse existing code from TI814X

Dear Wolfgang,

Quoted 2 lines

Hmmm... should not any boards that used to set CONFIG_TI814X in their board config files (ti814x_evm) now also set CONFIG_TI81XX ?

ti814x_evm already has it.
No other board use CONFIG_TI814X.

Quoted 2 lines

Please also fix the typo in the commit message:
s/CONFIG_81XX/CONFIG_TI81XX/

Right, I'll fix that.

Regards,

Signature · 1 line

Antoine

A message that is not in the archive (sent off-list or not yet received): [email protected]

Wolfgang Denk

2013-07-02 21:36 UTC #5 lore raw

PATCH v5 1/3 Prepare for TI816X : reuse existing code from TI814X

Dear "TENART Antoine",

Quoted 7 lines · In message <[email protected]> you…

Dear Wolfgang,
Quoted 2 lines
Hmmm... should not any boards that used to set CONFIG_TI814X in their board config files (ti814x_evm) now also set CONFIG_TI81XX ?
ti814x_evm already has it.
No other board use CONFIG_TI814X.

I see, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Time is a drug. Too much of it kills you.
                                      - Terry Pratchett, _Small Gods_

TENART Antoine

author

2013-06-28 15:18 UTC #6 lore raw

PATCH v5 2/3 Add TI816X support

In reply to a message not in the archive

Signed-off-by Antoine Tenart <[email protected]>

---
 arch/arm/cpu/armv7/am33xx/Makefile                 |    1 +
 arch/arm/cpu/armv7/am33xx/clock_ti814x.c           |   95 -----
 arch/arm/cpu/armv7/am33xx/clock_ti816x.c           |  445 ++++++++++++++++++++
 arch/arm/cpu/armv7/am33xx/emif4.c                  |    2 +
 arch/arm/include/asm/arch-am33xx/clock.h           |    4 +
 arch/arm/include/asm/arch-am33xx/clock_ti81xx.h    |  142 +++++++
 arch/arm/include/asm/arch-am33xx/ddr_defs.h        |   35 +-
 arch/arm/include/asm/arch-am33xx/hardware.h        |   10 +-
 arch/arm/include/asm/arch-am33xx/hardware_am33xx.h |    6 +
 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h |    6 +
 arch/arm/include/asm/arch-am33xx/hardware_ti816x.h |   57 +++
 arch/arm/include/asm/arch-am33xx/mmc_host_def.h    |    3 +
 arch/arm/include/asm/arch-am33xx/mux.h             |    2 +
 arch/arm/include/asm/arch-am33xx/mux_ti816x.h      |  363 ++++++++++++++++
 arch/arm/include/asm/arch-am33xx/spl.h             |   11 +-
 15 files changed, 1065 insertions(+), 117 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti816x.c
 create mode 100644 arch/arm/include/asm/arch-am33xx/clock_ti81xx.h
 create mode 100644 arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
 create mode 100644 arch/arm/include/asm/arch-am33xx/mux_ti816x.h

arch/arm/cpu/armv7/am33xx/Makefile +1 -0

index f4ccd2a..8cb7efb 100644
@@ -18,6 +18,7 @@ LIB	= $(obj)lib$(SOC).o
 
 COBJS-$(CONFIG_AM33XX)	+= clock_am33xx.o
 COBJS-$(CONFIG_TI814X)	+= clock_ti814x.o
+COBJS-$(CONFIG_TI816X)	+= clock_ti816x.o
 COBJS-$(CONFIG_AM33XX)	+= clock.o
 COBJS	+= sys_info.o
 COBJS	+= mem.o

arch/arm/cpu/armv7/am33xx/clock_ti814x.c +0 ~~-95~~

103 lines not on this page · raw message

arch/arm/cpu/armv7/am33xx/clock_ti816x.c new file +445 -0

445 lines not on this page · raw message

arch/arm/cpu/armv7/am33xx/emif4.c +2 -0

index 3abb609..7340c4b 100644
@@ -94,7 +94,9 @@ void config_ddr(unsigned int pll, unsigned int ioctrl,
 		const struct emif_regs *regs, int nr)
 {
 	ddr_pll_config(pll);
+#ifndef CONFIG_TI816X
 	config_vtp(nr);
+#endif
 	config_cmd_ctrl(ctrl, nr);
 
 	config_ddr_data(data, nr);

arch/arm/include/asm/arch-am33xx/clock.h +4 -0

index ff9d616..f212add 100644
@@ -21,6 +21,10 @@
 
 #include <asm/arch/clocks_am33xx.h>
 
+#ifdef CONFIG_TI81XX
+#include <asm/arch/clock_ti81xx.h>
+#endif
+
 #define LDELAY 1000000
 
 /*CM_<clock_domain>__CLKCTRL */

arch/arm/include/asm/arch-am33xx/clock_ti81xx.h new file +142 -0

142 lines not on this page · raw message

arch/arm/include/asm/arch-am33xx/ddr_defs.h +22 ~~-13~~

index bb53a6a..374edbf 100644
@@ -200,37 +200,46 @@ struct ddr_data_regs {
  * correspond to DATA1 registers defined here.
  */
 struct ddr_regs {
-	unsigned int resv0[7];
-	unsigned int cm0csratio;	/* offset 0x01C */
+	unsigned int resv0[3];
+	unsigned int cm0config;		/* offset 0x00C */
+	unsigned int cm0configclk;	/* offset 0x010 */
 	unsigned int resv1[2];
+	unsigned int cm0csratio;	/* offset 0x01C */
+	unsigned int resv2[2];
 	unsigned int cm0dldiff;		/* offset 0x028 */
 	unsigned int cm0iclkout;	/* offset 0x02C */
-	unsigned int resv2[8];
+	unsigned int resv3[4];
+	unsigned int cm1config;		/* offset 0x040 */
+	unsigned int cm1configclk;	/* offset 0x044 */
+	unsigned int resv4[2];
 	unsigned int cm1csratio;	/* offset 0x050 */
-	unsigned int resv3[2];
+	unsigned int resv5[2];
 	unsigned int cm1dldiff;		/* offset 0x05C */
 	unsigned int cm1iclkout;	/* offset 0x060 */
-	unsigned int resv4[8];
+	unsigned int resv6[4];
+	unsigned int cm2config;		/* offset 0x074 */
+	unsigned int cm2configclk;	/* offset 0x078 */
+	unsigned int resv7[2];
 	unsigned int cm2csratio;	/* offset 0x084 */
-	unsigned int resv5[2];
+	unsigned int resv8[2];
 	unsigned int cm2dldiff;		/* offset 0x090 */
 	unsigned int cm2iclkout;	/* offset 0x094 */
-	unsigned int resv6[12];
+	unsigned int resv9[12];
 	unsigned int dt0rdsratio0;	/* offset 0x0C8 */
-	unsigned int resv7[4];
+	unsigned int resv10[4];
 	unsigned int dt0wdsratio0;	/* offset 0x0DC */
-	unsigned int resv8[4];
+	unsigned int resv11[4];
 	unsigned int dt0wiratio0;	/* offset 0x0F0 */
-	unsigned int resv9;
+	unsigned int resv12;
 	unsigned int dt0wimode0;	/* offset 0x0F8 */
 	unsigned int dt0giratio0;	/* offset 0x0FC */
-	unsigned int resv10;
+	unsigned int resv13;
 	unsigned int dt0gimode0;	/* offset 0x104 */
 	unsigned int dt0fwsratio0;	/* offset 0x108 */
-	unsigned int resv11[4];
+	unsigned int resv14[4];
 	unsigned int dt0dqoffset;	/* offset 0x11C */
 	unsigned int dt0wrsratio0;	/* offset 0x120 */
-	unsigned int resv12[4];
+	unsigned int resv15[4];
 	unsigned int dt0rdelays0;	/* offset 0x134 */
 	unsigned int dt0dldiff0;	/* offset 0x138 */
 };

arch/arm/include/asm/arch-am33xx/hardware.h +2 -8

index 5a27f9c..5106d7b 100644
@@ -23,6 +23,8 @@
 #include <asm/arch/omap.h>
 #ifdef CONFIG_AM33XX
 #include <asm/arch/hardware_am33xx.h>
+#elif defined(CONFIG_TI816X)
+#include <asm/arch/hardware_ti816x.h>
 #elif defined(CONFIG_TI814X)
 #include <asm/arch/hardware_ti814x.h>
 #endif

@@ -61,21 +63,13 @@
 #define CM_CEFUSE			0x44E00A00
 #define PRM_DEVICE			0x44E00F00
 
-/* VTP Base address */
-#define VTP1_CTRL_ADDR			0x48140E10
-
 /* DDR Base address */
 #define DDR_CTRL_ADDR			0x44E10E04
 #define DDR_CONTROL_BASE_ADDR		0x44E11404
-#define DDR_PHY_CMD_ADDR2		0x47C0C800
-#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
 
 /* UART */
 #define DEFAULT_UART_BASE		UART0_BASE
 
-#define DDRPHY_0_CONFIG_BASE		(CTRL_BASE + 0x1400)
-#define DDRPHY_CONFIG_BASE		DDRPHY_0_CONFIG_BASE
-
 /* GPMC Base address */
 #define GPMC_BASE			0x50000000

arch/arm/include/asm/arch-am33xx/hardware_am33xx.h +6 -0

index fa02f19..8df60ac 100644
@@ -39,12 +39,18 @@
 
 /* VTP Base address */
 #define VTP0_CTRL_ADDR			0x44E10E0C
+#define VTP1_CTRL_ADDR			0x48140E10
 
 /* DDR Base address */
 #define DDR_PHY_CMD_ADDR		0x44E12000
 #define DDR_PHY_DATA_ADDR		0x44E120C8
+#define DDR_PHY_CMD_ADDR2		0x47C0C800
+#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
 #define DDR_DATA_REGS_NR		2
 
+#define DDRPHY_0_CONFIG_BASE		(CTRL_BASE + 0x1400)
+#define DDRPHY_CONFIG_BASE		DDRPHY_0_CONFIG_BASE
+
 /* CPSW Config space */
 #define CPSW_MDIO_BASE			0x4A101000

arch/arm/include/asm/arch-am33xx/hardware_ti814x.h +6 -0

index 8f9315c..2ac6b7d 100644
@@ -39,12 +39,18 @@
 
 /* VTP Base address */
 #define VTP0_CTRL_ADDR			0x48140E0C
+#define VTP1_CTRL_ADDR			0x48140E10
 
 /* DDR Base address */
 #define DDR_PHY_CMD_ADDR		0x47C0C400
 #define DDR_PHY_DATA_ADDR		0x47C0C4C8
+#define DDR_PHY_CMD_ADDR2		0x47C0C800
+#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
 #define DDR_DATA_REGS_NR		4
 
+#define DDRPHY_0_CONFIG_BASE		(CTRL_BASE + 0x1400)
+#define DDRPHY_CONFIG_BASE		DDRPHY_0_CONFIG_BASE
+
 /* CPSW Config space */
 #define CPSW_MDIO_BASE			0x4A100800

arch/arm/include/asm/arch-am33xx/hardware_ti816x.h new file +57 -0

57 lines not on this page · raw message

arch/arm/include/asm/arch-am33xx/mmc_host_def.h +3 -0

index 51ba791..724e252 100644
@@ -27,6 +27,9 @@
 #if defined(CONFIG_TI814X)
 #undef MMC_CLOCK_REFERENCE
 #define MMC_CLOCK_REFERENCE	192 /* MHz */
+#elif defined(CONFIG_TI816X)
+#undef MMC_CLOCK_REFERENCE
+#define MMC_CLOCK_REFERENCE	48 /* MHz */
 #endif
 
 #endif /* MMC_HOST_DEF_H */

arch/arm/include/asm/arch-am33xx/mux.h +2 -0

index 1c6b65f..4caa4d8 100644
@@ -23,6 +23,8 @@
 #include <asm/arch/mux_am33xx.h>
 #elif defined(CONFIG_TI814X)
 #include <asm/arch/mux_ti814x.h>
+#elif defined(CONFIG_TI816X)
+#include <asm/arch/mux_ti816x.h>
 #endif
 
 struct module_pin_mux {

arch/arm/include/asm/arch-am33xx/mux_ti816x.h new file +363 -0

363 lines not on this page · raw message

arch/arm/include/asm/arch-am33xx/spl.h +10 -1

index 4c23b27..6d7e8d6 100644
@@ -23,6 +23,14 @@
 #ifndef	_ASM_ARCH_SPL_H_
 #define	_ASM_SPL_H_
 
+#if defined(CONFIG_TI816X)
+#define BOOT_DEVICE_XIP		2
+#define BOOT_DEVICE_NAND	3
+#define BOOT_DEVICE_MMC1	6
+#define BOOT_DEVICE_MMC2	5
+#define BOOT_DEVICE_UART	0x43
+#define BOOT_DEVICE_MMC2_2	0xFF
+#else
 #define BOOT_DEVICE_XIP       	2
 #define BOOT_DEVICE_NAND	5
 #ifdef CONFIG_AM33XX

@@ -37,11 +45,12 @@
 #define BOOT_DEVICE_USBETH	68
 #define BOOT_DEVICE_CPGMAC	70
 #define BOOT_DEVICE_MMC2_2      0xFF
+#endif
 
 #ifdef CONFIG_AM33XX
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
-#elif defined(CONFIG_TI814X)
+#elif defined(CONFIG_TI81XX)
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
 #endif

Signature · 1 line

1.7.10.4

TENART Antoine

author

2013-06-28 15:18 UTC #7 lore raw

PATCH v5 3/3 Add TI816X evm board support

In reply to a message not in the archive

Signed-off-by Antoine Tenart <[email protected]>

---
 MAINTAINERS                  |    4 +
 board/ti/ti816x/Makefile     |   47 +++++++++
 board/ti/ti816x/evm.c        |  229 ++++++++++++++++++++++++++++++++++++++++++
 boards.cfg                   |    1 +
 include/configs/ti816x_evm.h |  180 +++++++++++++++++++++++++++++++++
 5 files changed, 461 insertions(+)
 create mode 100644 board/ti/ti816x/Makefile
 create mode 100644 board/ti/ti816x/evm.c
 create mode 100644 include/configs/ti816x_evm.h

MAINTAINERS +4 -0

index 7820375..38ff5c3 100644
@@ -940,6 +940,10 @@ Lucas Stach <[email protected]>
 
 	colibri_t20_iris	Tegra20 (ARM7 & A9 Dual Core)
 
+Antoine Tenart <[email protected]>
+
+	TI816X		ARM ARMV7 (TI816x Soc)
+
 Nick Thompson <[email protected]>
 
 	da830evm	ARM926EJS (DA830/OMAP-L137)

board/ti/ti816x/Makefile new file +47 -0

47 lines not on this page · raw message

board/ti/ti816x/evm.c new file +229 -0

229 lines not on this page · raw message

boards.cfg +1 -0

index c0c4282..0c8adf0 100644
@@ -250,6 +250,7 @@ am335x_evm_uart4             arm         armv7       am335x              ti
 am335x_evm_uart5             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL6,CONS_INDEX=6
 am335x_evm_usbspl            arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT
 ti814x_evm                   arm         armv7       ti814x              ti             am33xx
+ti816x_evm                   arm         armv7       ti816x              ti             am33xx
 pcm051                       arm         armv7       pcm051              phytec         am33xx      pcm051
 sama5d3xek_mmc               arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_MMC
 sama5d3xek_nandflash         arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH

include/configs/ti816x_evm.h new file +180 -0

180 lines not on this page · raw message

Signature · 1 line

1.7.10.4